Well I am facing problem installing firmware in my HTC desire 516h. I found a stock rom file in the internet and tried to install it in my phone. But as i load the scatter file in the SP flash tool and press the download button, nothing happens. I mean downlod doesnot start and everything stops at 0%. Please help me resolving this problem.
Related
guys i brickd my phone gionee p2(mtk6572) i mek i backup using mtk droid tools and it was succesful but after i brickd my phone i tried to restore it usin sp flash tool but the computer s not recognyzing my device i tried gionee usbn driver but wen i click install windows says its does not support this type of installation....and wen i open sp flash tools and click on scatter loading and select the scatter.txt file sp flash tools pop up sayin that i shoud check the scatter file if is illegal.....help me please i need drivers that will make the sp flash tool flash my phone help me please
Hi. Everyone.
If someone has tried to flash a custom rom without backing up his stock rom, and messed up mid way by not installing custom rom. No need to worry Follow these steps
Go to
needrom.com/phone-roms/qmobile
download QMobile Z4 stock rom (You need Winrar 5 to unzip it). Unzip at your PC where u can easily access it.
Then You need MTK 6589t drivers (Download, Unzip n install) attached here
and finally u need SP Flash tool (Attached Here)
Just extract SP Flash Tool from Zip file and open it from Blue icon
Click "Scatter Loading" Scatter file is placed in the folder where you extracted the Stock Rom. (Dont attach your phone to pc uptill now)
Click "Download" on SP Flash Tool software and attache your Z4 with PC by micro USB cable. Phone will be detected and Stock ROM will be flashed in few minutes. A greenish Blue circle confirms Flashing successful. Close SP Flash Tool. Detach your Phone and Re boot.
My Qmobile z4 is full dead just read light show on charging time.
How is flash plz help me
[email protected]
Plz help me all
Mobile z4 flash
Aami786 said:
Hi. Everyone.
If someone has tried to flash a custom rom without backing up his stock rom, and messed up mid way by not installing custom rom. No need to worry Follow these steps
Go to
needrom.com/phone-roms/qmobile
download QMobile Z4 stock rom (You need Winrar 5 to unzip it). Unzip at your PC where u can easily access it.
Then You need MTK 6589t drivers (Download, Unzip n install) attached here
and finally u need SP Flash tool (Attached Here)
Just extract SP Flash Tool from Zip file and open it from Blue icon
Click "Scatter Loading" Scatter file is placed in the folder where you extracted the Stock Rom. (Dont attach your phone to pc uptill now)
Click "Download" on SP Flash Tool software and attache your Z4 with PC by micro USB cable. Phone will be detected and Stock ROM will be flashed in few minutes. A greenish Blue circle confirms Flashing successful. Close SP Flash Tool. Detach your Phone and Re boot.
Click to expand...
Click to collapse
I will tell you the method that worked for me
Firs of al I highly recommend you to use the v.3 version of sp flash tool,it worked for me then download q mobile stock ROM from www.needrom.com select q mobile and go to page 2 and there u will see q mobile stock ROM select it and download it, once u have downloaded just extract to desktop and then open sp flash tool and then I formated whole drive with sp flash tool and then try format all and download option if that doesn't work try firmware update option, if even that dosent work try download option and hit download then attach your phone with USB cable to your computer and it will be detected as v com driver and then the download will start, once the download will finish there will appear a green tick mark just close it and power on your q mobile z4 if u see the q mobile logo then just press volume down + volume up + power button and you will go to factory mod then clear data and your q mobile will start and will work 100% ...
I don't know if this method will work for you I don't know what you've done with it, this method just worked for me and know my z4 is working like a charm
qmobile z4
Hello friends, my qmobile z4 is completely dead only charging light is on. i have tried everything. i have downloaded flash tools and firmware but it flash tools only download the flash and after that nothing happened. but when i try to firmware upgrade then i need to check uboot, cashe and userdata. but these are not included in this firmware. can you please tell me what to do with this.
my email is [email protected]
sheridani said:
Hello friends, my qmobile z4 is completely dead only charging light is on. i have tried everything. i have downloaded flash tools and firmware but it flash tools only download the flash and after that nothing happened. but when i try to firmware upgrade then i need to check uboot, cashe and userdata. but these are not included in this firmware. can you please tell me what to do with this.
my email is [email protected]
Click to expand...
Click to collapse
Dear friend "Aami786" thank you for sharing sure nice information.
Unfortunately I am having the same problem as "sheridani"
My phone is also completely dead only charging light is on.
But the phone is being detected on the SPFlashTool, is there any other file that needs to be updated on the phone.
awaiting reply...
Thanks in advance!
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
HadesGacheru said:
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
Click to expand...
Click to collapse
Well I had the same problem, am not an pro, and man u gotta understand, I opened device manager (Right click my computer, properties, device manager) then i realized that there was a new unknown device, I updated it from All MTK USB Driver 2014 i had downloaded earlier, then back to SP Flash Tool. and it completed the installation of my cutome rom
please help me..i flash lenovo A880..everything is fine..done flashing and turn on my phone Tool DL image fail..i have try many solution but it doesnt fix it...tick the DA download all at sp flash tool doesnt fix it..try difrent rom doesnt fix it..try diffrent sp flash tool doesnt fix it..please please help me...
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
dskpoison said:
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
Click to expand...
Click to collapse
you try soft Erase Tool , link ;https://drive.google.com/file/d/0B3CCjqbTuz5RUTY2ckJKWWp5LTg/view