Related
Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?
Jonni1 said:
Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?
Click to expand...
Click to collapse
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.
Sideness said:
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.
Click to expand...
Click to collapse
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?
Jonni1 said:
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?
Click to expand...
Click to collapse
Well, there's no way to know if your firmware flash was successful or not. I suggest you try with 5.0, if it doesn't work try 6.0. You can try downgrade package in last resort.
The computer is not detecting the phone with adb. adb devices = nothing. I have the correct drivers.
I think the problem might be that USB debugging is turned off in my phone...anyway to flash a firmware now?
Can anyone help me? I only need the answer if it is fixable or not..
same problem help
Okay, I tried to flash a firmware trough the sd card with the dload...nothing happens...
Is my device fully bricked...?
Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..
Jonni1 said:
Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..
Click to expand...
Click to collapse
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H
Lucki_X said:
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H
Click to expand...
Click to collapse
How do I do that or can I even do that when the phone is only black...?
Jonni1 said:
How do I do that or can I even do that when the phone is only black...?
Click to expand...
Click to collapse
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H
Lucki_X said:
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H
Click to expand...
Click to collapse
Nope. Fastboot is not detecting the phone.
Jonni1 said:
Nope. Fastboot is not detecting the phone.
Click to expand...
Click to collapse
I suppose that you have the right drivers installed in your PC for Honor. I'm sorry I can't provide more advice.
Sent from PLK-TL01H
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...-unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
mumith3 said:
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
Click to expand...
Click to collapse
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
mumith3 said:
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
MrKnight230 said:
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
Click to expand...
Click to collapse
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
mumith3 said:
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
Click to expand...
Click to collapse
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
MrKnight230 said:
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
Click to expand...
Click to collapse
No mate, You'll need a SD card.!!!
mumith3 said:
No mate, You'll need a SD card.!!!
Click to expand...
Click to collapse
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Phone works again now! I love all of you!!!
MrKnight230 said:
Phone works again now! I love all of you!!!
Click to expand...
Click to collapse
Enjoy and do come back
Just kidding...
Sent from my PLK-L01 using XDA Labs
I flashed my phone with kate_global_images_7.5.19_20170519.0000.00_6.0_global in order to unlock the bootloader via mi unlock. The phone has successfully connected to mi cloud and can be located on the i.mi.com website. If I go into developer options and tap on the button to bind the phone to my account for unlocking it just keeps telling me to try again in another couple of minutes. This seems to be a really common problem and I haven't been able to find a solution. Any ideas? Thanks.
Same here. Been waiting for 5 days now after getting permission. Still fails to bind. This whole official unlock way is a total POS. It even says after you are granted permission you can unlock right away but that's not true at all. I also have SE and dev rom btw.
maybe try to flash miui 8 via fastboot..
i used fastboot rom miui 8 , miflash (not xiaomiflash) ver 2016, and unlock ver 1.1..
Augesvarer said:
maybe try to flash miui 8 via fastboot..
i used fastboot rom miui 8 , miflash (not xiaomiflash) ver 2016, and unlock ver 1.1..
Click to expand...
Click to collapse
MIUI 8 what? The dev rom 7.x is MIUI 8. Do you mean dev or stable? I was on MIUI 8 stable before but it didn't help.
my issues, evrytime i flashed miui rom, my imei isn't showing up (i need to official unlock to flash lastest los)
i tried some rom dev 7.x.x.x , but i cant login mi account via wifi.
then, i flashed this rom with miflash 2016 (mine is kenzo)
http://en.miui.com/thread-439892-1-1.html
and it works, i can unlock my phone without imei..
Augesvarer said:
my issues, evrytime i flashed miui rom, my imei isn't showing up (i need to official unlock to flash lastest los)
i tried some rom dev 7.x.x.x , but i cant login mi account via wifi.
then, i flashed this rom with miflash 2016 (mine is kenzo)
http://en.miui.com/thread-439892-1-1.html
and it works, i can unlock my phone without imei..
Click to expand...
Click to collapse
I think the "can not bind" problem is specific to Kate. The IMEI problem with your Kenzo phone is probably a separate issue.
dwl99 said:
I flashed my phone with kate_global_images_7.5.19_20170519.0000.00_6.0_global in order to unlock the bootloader via mi unlock. The phone has successfully connected to mi cloud and can be located on the i.mi.com website. If I go into developer options and tap on the button to bind the phone to my account for unlocking it just keeps telling me to try again in another couple of minutes. This seems to be a really common problem and I haven't been able to find a solution. Any ideas? Thanks.
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
it work perfectly and i have successfully unlock my kate and flash latest LOS.
abe_long said:
Try this
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
it work perfectly and i have successfully unlock my kate and flash latest LOS.
Click to expand...
Click to collapse
Thanks for the reply but I need to have the latest dev ROM to allow LineageOS to flash - it checks for the most recent firmware.
dwl99 said:
Thanks for the reply but I need to have the latest dev ROM to allow LineageOS to flash - it checks for the most recent firmware.
Click to expand...
Click to collapse
Yes i know.first you use the older version miui to unlock the bootloader.after that just reflash to latest dev rom.make sure you checked CLEAN ALL.it will not lock your bootloader.
abe_long said:
Yes i know.first you use the older version miui to unlock the bootloader.after that just reflash to latest dev rom.make sure you checked CLEAN ALL.it will not lock your bootloader.
Click to expand...
Click to collapse
Thanks, I tried this but got stuck in a bootloop.
dwl99 said:
Thanks, I tried this but got stuck in a bootloop.
Click to expand...
Click to collapse
At which step does the bootloop come..?i also having bootloop after flash the twrp but it can be solve by flash the lazy flash zip
abe_long said:
At which step does the bootloop come..?i also having bootloop after flash the twrp but it can be solve by flash the lazy flash zip
Click to expand...
Click to collapse
I flashed kate_global_images_6.7.14_20160629.0000.25_6.0_global_1b43c8f07f and then started to get bootloops. I didn't get as far as flashing TWRP.
dwl99 said:
I flashed kate_global_images_6.7.14_20160629.0000.25_6.0_global_1b43c8f07f and then started to get bootloops. I didn't get as far as flashing TWRP.
Click to expand...
Click to collapse
After flash,try to wipe data and cache in recovery.then reboot your device.if after 5 min still looping,try to force reboot.
abe_long said:
After flash,try to wipe data and cache in recovery.then reboot your device.if after 5 min still looping,try to force reboot.
Click to expand...
Click to collapse
I thought of that but I couldn't get the phone to boot into recovery - Power and Vol+ opened a screen with a picture of the phone with a cable being plugged into it rather than recovery
dwl99 said:
I think the "can not bind" problem is specific to Kate. The IMEI problem with your Kenzo phone is probably a separate issue.
Click to expand...
Click to collapse
Just try unlocking via mi unlock and tell us ignore the message
Androbots said:
Just try unlocking via mi unlock and tell us ignore the message
Click to expand...
Click to collapse
Doesn't work - complains that the deivice isn't bound to the account
There is no point trying anything. Nothing works. I have a 3 month long email chain with xiaomi support, which ended by them saying I should contact the direct seller. Basically they washed their hands. I ended up sending my device to a guy, who has a xiaomi service licence, and he managed to unlock it officially with his code.
If you cannot bind your account and device for two weeks with multiple tries, you should just give up on the "mainstream" unlock procedure. It will never work, and the only thing that comes out of it is slowly bulding rage.
It's not worth it.
smash1986hu said:
There is no point trying anything. Nothing works. I have a 3 month long email chain with xiaomi support, which ended by them saying I should contact the direct seller. Basically they washed their hands. I ended up sending my device to a guy, who has a xiaomi service licence, and he managed to unlock it officially with his code.
If you cannot bind your account and device for two weeks with multiple tries, you should just give up on the "mainstream" unlock procedure. It will never work, and the only thing that comes out of it is slowly bulding rage.
It's not worth it.
Click to expand...
Click to collapse
Sounds like good advice. My Note 4 has arrived now so I think I'll just flash the stock MIUI ROM & ebay it.
smash1986hu said:
which ended by them saying I should contact the direct seller
Click to expand...
Click to collapse
What if I bought it directly from their online store? Do I contact them back?
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
HiteshK5 said:
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
Click to expand...
Click to collapse
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
uncleabubear said:
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
It's telling me to boot to fastboot which I'm unable too.
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
HiteshK5 said:
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
Click to expand...
Click to collapse
You need use DC unlocked to unbrick it. But you might need to open your device.
miststudent2011 said:
You need use DC unlocked to unbrick it. But you might need to open your device.
Click to expand...
Click to collapse
It's not on the supported devices list. Should i continue?
Delete
HiteshK5 said:
It's not on the supported devices list. Should i continue?
Click to expand...
Click to collapse
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
miststudent2011 said:
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Click to expand...
Click to collapse
It would be very kind of you if you can share the link.
miststudent2011 said:
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
Click to expand...
Click to collapse
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
HiteshK5 said:
It would be very kind of you if you can share the link.
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
Click to expand...
Click to collapse
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
miststudent2011 said:
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
Click to expand...
Click to collapse
Yep, from india. Trying to avoid going to the service centre as it's like 25km away from my house
Will check the forums.
Any idea about the board which this phone has. Want to try DC Phoenix
HiteshK5 said:
Any idea about the board which this phone has. Want to try DC Phoenix
Click to expand...
Click to collapse
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
It's already coming as COM 1.0 in device manager. Trying to flash update.app (only fastboot part) but it shows no device detected to upgrade. Had downloaded a board software and clicked update button. I clicked update button and it detected the device but showed that I don't have enough credits.
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
What are exact testpoints for V10? since there is no officially images with testpoints for V10.
It's available inside DC-Phoenix apps...
I don't have the tools to open the phone. Maybe l will need to go to a service centre on Monday. If possible please try to help in fixing this phone.
oslo83 said:
It's available inside DC-Phoenix apps...
Click to expand...
Click to collapse
Not for view10
Hi i have same problem my V10 is Brick Not ON, nOT go in Fastboot mode my Model is BKL-L09 i have downloaded DC-Phoneix in possible repair?
LTE
Sent from my Vfone 6++ using Tapatalk
Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
q13017 said:
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
Click to expand...
Click to collapse
Does this mean it will remove the demo mode?
Shkelqim.rexhepi said:
Does this mean it will remove the demo mode?
Click to expand...
Click to collapse
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
douglasmietto said:
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
Click to expand...
Click to collapse
Its the almost the same... You got same version of custom and preloader
did you tried to just unstick demo mod under developper options??
Why your phone is in demo mod? what's happened?
Shkelqim.rexhepi said:
Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
Click to expand...
Click to collapse
You can turn off demo mode in developer option.