I recently flashed my xiaomi redmi hm 2A after rooting with cygen rom via flashify to enable me access 3G network on my phone internationally as there is no global rom for this as I have read in different thread. when I rebooted my phone as per the instruction in flashify the phone boots past the MI logo and then enters into a black screen. I have tried entering flashboot mode and recovery mode using the standard methods but not successful. The phone powers on automatically when I insert the USB Cable and when I remove the battery it tries to boot flashing the MI logo. I have tried to flash it using MI flash tool but it is not detected either by mi flashtool or mi pc suite. Iam stuck on this, I will really appreciate any help with this? it is 2014512: was flashing it to be able to access sim network as it was recognizing sim card but not registering network.
nyaish said:
I recently flashed my xiaomi redmi hm 2A after rooting with cygen rom via flashify to enable me access 3G network on my phone internationally as there is no global rom for this as I have read in different thread. when I rebooted my phone as per the instruction in flashify the phone boots past the MI logo and then enters into a black screen. I have tried entering flashboot mode and recovery mode using the standard methods but not successful. The phone powers on automatically when I insert the USB Cable and when I remove the battery it tries to boot flashing the MI logo. I have tried to flash it using MI flash tool but it is not detected either by mi flashtool or mi pc suite. Iam stuck on this, I will really appreciate any help with this? it is 2014512: was flashing it to be able to access sim network as it was recognizing sim card but not registering network.
Click to expand...
Click to collapse
You will get more help, support and possible replies if you delete this post from the android apps and games section and repost it to the correct thread for your device......
(Xiaomi Redmi 2 question and answers)
MODS
PLEASE REMOVE this post
duplicate thread , original here https://forum.xda-developers.com/redmi-2/help/xiaomi-redmi-hm-2a-boot-fastboot-mode-t3844822
thread closed
Related
Hello,
I just received my redmi note 3 SD, with globale stable rom...
I wanted to install CM13.
So first, i wanted to install global dev rom to unlock bootloader.
I tried with updater but i have an error.
I tried with fastboot global dev rom and miflash with the tuto but i have always error.
I tried different version of rom and miflash and now my phone is on black screen. I haven't any acces to fastboot mod with start button+volum - or +.... I have only red light and black screen and when i connect phone to pc i see that: Qualcomm HS USB Diagnostics 900E (com10).
Can you help me to unbrick please?
first: u dont unlock the bootloader by flashing global dev rom ... u unlock the bootloader by either request official unlock and using the official xiaomi unlock tool or use the inoffiial method.
is the red light flashing? maybe youre in EDL mode? then u can flash the whole rom
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
kevin761 said:
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
Click to expand...
Click to collapse
you don't have to be on global dev rom to unlock bootloader, i unlocked mine officially on global stable rom
I have opened the back panel, disassemble motherboard and push the 2 pins... After, my device was detected as Qualcomm 2008 and not 900E and it was detected into miflash old version...
I tried to flash the last fastboot globale stable rom but i had an error " max buffer sector is 256"... And my phone came back to Qualcomm 900E in the windows 10 settings... And it's now not detected by miflash... I need to unmount again and touch the 2 pins on motherboard...
After what i can do to flash a rom correctly?? I don't understand why i have always an error...
Use newest version miflash on windows 10. Make sure it's plugged into USB 2.0 port.
Hello,
Problem solved... I disassemble a second time the phone, i pushed the 2 pins on the motherboard.
I did the same as this tuto: http://en.miui.com/thread-245347-1-1.html
At the middle of the tuto, i don't understand why but my phone turn on with logo "Mi" at boot!!! And the phone boot correctly...
On my PC, I have unistalled all programs and reinstalled all,.. After, i have installed ROM Global dev>Unlock BL> Install TWRP>Install CM13>Install Gapps... And now the phone works fine!!!
Thanks!
Hi, i tried to flash CyanogenMod 14.1 official latest nightly (yes i flashed firmware and gapps), but i think something i did something wrong and i bricked my device, because now i can't even turn it on, when i try to do it it doesn't happen anything, just black screen and red led, it just shows for a frame the MI logo, then it turns off.
What can i do?
fvnkh said:
Hi, i tried to flash CyanogenMod 14.1 official latest nightly (yes i flashed firmware and gapps), but i think something i did something wrong and i bricked my device, because now i can't even turn it on, when i try to do it it doesn't happen anything, just black screen and red led, it just shows for a frame the MI logo, then it turns off.
What can i do?
Click to expand...
Click to collapse
Your bootloader is locked. Unlock it by miunlock tool.
Sent from my Redmi Note 3 using XDA Free mobile app
pratikmore said:
Your bootloader is locked. Unlock it by miunlock tool.
Sent from my Redmi Note 3 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, i will try it, but with MIUnlock Tool i need to request the unlock of my device on the website right?
Yes, so how you flash cm14.1? Without unlock trick? Flash fastboot rom via edl method but your internal storage will wipe and you lose your data.
Sent from my Redmi Note 3 using XDA Free mobile app
http://en.miui.com/thread-235865-1-1.html
This is an unbrick tutorial if you need it.It's very reliable, and I think it should work for you.
If it doesn't, try searching for tutorials for a deep flash cable. kinda like the usb jig for samsung devices.
Force edl with fix in miui forum then flash miui fastboot rom. Unlock start again.
I have his same problem, but i unlocked with Mi Unlock Tool, any clues about that?
I had a similar issue couple days ago when flashing another MIUI rom. The phone wouldn't turn on or enter fastboot mode. When I plug into the computer, it would detect something is plugged in with that windows sound and the phone's LED light flashes RED. At this state, I think phone is in EDL mode but MiFlash doesn't detect anything. When I check my Device Manager, the COM Port would show my device as Qualcomm HS-USB Diagnostics 900E.
If you're getting Qualcomm HS-USB Diagnostics 900E in Device Manager, you are in Diagnostics mode, basically a brick. You can try following this link (http) en.miui. com/thread-274589-1-1.html to fix it.
I unbricked my device, I flashed miui 7.1.8.0 fastboot rom, unlocked the bootloader and then i flash cm 14.1 without any problem.
Thank you guys.
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
i tried many methods dont know which method works for me. i think this method worked for me
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
zbrix said:
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
Click to expand...
Click to collapse
Follow this tutorial, make a deep flash cable as shown. This will work on RN4 SD version only. I am the one who got bootloop on RN4 SD first time and i made the new cable and did everything well.
http://en.miui.com/forum.php?mod=viewthread&tid=491655
this diy method not works tried it many time
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Even I had this problem. However I fixed this. Try these steps
1.Press power button and volume+ button till you see Phone and USB cable picture.
2.Install lastest version of Chinese Mi Pcsuite (Don't use English version as it has some issues detecting your phone).
3. Now connect your phone to pc via usb cable
4. A popup menu will appear in Chinese. Select the second option which is factory reset.
5. After that the phone reboots and everything will work fine. However you will lose user data.
Yes but mine is MTK version?
Redmi note 4 Snapdragon
Hii friends I am new here .
My redmi note 4 Snapdragon is not starting and directly go into fastboot mode when I press power button phones is vibreat and show fastboot mode ..
Directly enter in fastboot ..plzzz help me...I have no idea how to fix this problem plzzz some one help me..plzzz
Read my post at discussion thread..... I can help..
The link
The link to how to deep flash doesn't work. Is there any other tutorial on making a deep flash cable?
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Anmol108 said:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Click to expand...
Click to collapse
Got out of it throw mi flash. Tool
Himanshu.kulkarni3 said:
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
Click to expand...
Click to collapse
That command does not work anymore. Tried it, it says it rebooted it but the phone itself doesn't do anything but stay in fastboot mode
After updating my redmi note 5 it works normal for one day and after that i restart my phone and it turns to bootloop .It start shows mi logo and then again starts .The whole continuous till battery is dead
My phone bootloader is locked so try to install twrp via unofficial method that is replacing original recovery.img to twrp(renaming it to recovery.img).But nothing happens after flashing when i go to recovery mode the whole screen truns balck and phone connected to pc via 900E port.
I am trying to recover it but nothing happens
This problem happens in past but i recover it because in that time twrp is install and the only thing is to mount some partition(not in memory which partition).
but this time no twrp plz help plz....
thanks in advance.
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Stransky said:
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
I get in fastboot mode but my phone bootloader is locked . I have flash my phone via test point method to its base ver rom but problem exist till now:crying:.
Anyone plz give the way to install twrp on this bricked phone and after that i can handel it.
I have a Redmi 8a(olivelite). Yesterday I tried official TWRP of Redmi 8(olive) in my Redmi 8a. I did not flash the TWRP, I just booted into TWRP using this command "fastboot boot twrp.img". It worked and booted into twrp. Touch was working. MTP was working. So then I tried to flash Redmi 8(olive) rom in Redmi 8a using TWRP. it did not flash. wiped DATA, CACHE, DALVIK CACHE, SYSTEM. MTP stopped working and I could not copy files to Redmi 8a while in TWRP. So I then tried to reboot to bootloader but as soon as hit reboot bootloader in TWRP the phone went black and was not turning on. Phone was also not recognized by PC. I googled and found edl thing. I opened the back part of my phone and used pins to get to edl(also removed battery connector). Then I tried mi flash tool. phone was recognized as COM[NUMBER] device in flash tool. Did not work. shows cannot receive hello packet. Tried other methods found on the internet. like- changing port, usb 2.0, changing device(laptop, desktop), reboot after installing drivers. still could not receive hello packet. Then I tried Qfil and Miracle tool. Still no progress. Then I changed mi flash tool to MiFlash20181115.zip this one. It showed unauthorized to download.
Current Status of Phone-
Phone does not boot or power on, cant get to fastboot mode or recovery. Can boot to edl mode.
Device Model-
Redmi 8a(olivelite). 3gb indian variant.
Any help would be appreciated.
You just flash stock vbmeta
Then flash stock recovery
It's problem your hanset not booting fastboot then try edl cabels or search for edl point on Google
Sent from my Redmi 8A using Tapatalk
rehan992 said:
You just flash stock vbmeta
Then flash stock recovery
It's problem your hanset not booting fastboot then try edl cabels or search for edl point on Google
Sent from my Redmi 8A using Tapatalk
Click to expand...
Click to collapse
Can not flash vbmeta and stock recovery because device can not boot into fastboot. The phone is only recognized as COM after edl point spark.
Flash fastboot rom in edl mode with miflash tool
Sent from my Redmi 8A using Tapatalk
rehan992 said:
Flash fastboot rom in edl mode with miflash tool
Sent from my Redmi 8A using Tapatalk
Click to expand...
Click to collapse
I tried to flash fastboot rom but mi flash tool says "cannot receive hello packet". then I tried different mi flash tool it says Account not Authorized
AL AMIN KOUSER said:
I tried to flash fastboot rom but mi flash tool says "cannot receive hello packet". then I tried different mi flash tool it says Account not Authorized
Click to expand...
Click to collapse
Disconnect your battery cable and try flash
If it's not happen then go to service center
Sent from my Redmi 8A using Tapatalk
In fastboot Identifies the device? If yes, then sew through the console
Sorry for my bad english. I am not literate and in Russian )))
I could not solve the problem by myself so I went to an authorized mi customer care. They solved the problem. Now the phone boots and works fine. They charged 500 BDT or around 6 USD(according to exchange rate of today).
SOLVED
I could not solve the problem by myself. So I went to an authorized mi customer care. They fixed the phone. Now it boots and bootloader stayed unlocked. They charged 500 BDT(around 6 USD by exchange rate of today).
AL AMIN KOUSER said:
I could not solve the problem by myself. So I went to an authorized mi customer care. They fixed the phone. Now it boots and bootloader stayed unlocked. They charged 500 BDT(around 6 USD by exchange rate of today).
Click to expand...
Click to collapse
Congratulations ! Good luck. )) Your act was rash
Sorry for my bad english. I am not literate and in Russian )))