Related
Hello again
Sometimes we can brick our devices by a bad unlock, flashing process, or simply bad luck.
The phone doesn't turn on and there is a Red Led Of Death when pressing power button. Even with a GREEN led when we plug the phone with back key pressed the computer detect the phone as "unknown device" so there is no chance to get fixed by Flashtool or SEUS/PC Companion.
Well this problem normally means that the bootloader is broken or damaged. So, in order to fix it we need to write a new SEMCboot and after this we were able to flash a full and fresh firmware with flashtool and unbrick our Xperia.
This process like unlocking process requires SETool dongle/box and a paperclip to make a testpoint to put the phone in flash mode and be able to write the SEMCBoot.
I can help to anyone with a bricked Xperia Arc/Play/Neo/Pro just make send me a PM.
Like unlocking process you will need this 3 programs:
SETool software for unlocking
USB Over network client for remote dongle
Teamviewer client for remote support and guide
THIS PROCESS IS FREE
anyway if you want me to buy a Dr. Peper just
Sometimes even after fix the bootloader the phone doesn't want to boot. In most cases this is by a damaged TRIM AREA (TA).
The trim area is a part of softwere stored in eeprom so it can be read and write with the proper software like SETool.
Read and Write trim area is very easy but you should know that some sectors of the TA are unique for you phone, lets call it Security Units.
The process for repair trim area is indeed very easy.
For sure we need Testpoint like in unlocking or bootloader repair process.
1. Backup Security Units with this script:
Code:
taread:00020851
taread:000207D3
taread:000207Da
2. Write a Working TA backup from another phone (same model)
3. Restore Security Units.
Thats all, now your phone should boot well but is 90% possible that you dont get Signal so for fix that we need to unlocking.
If this last thing is needed you can refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1232050
This could be helpful
That's great news. Thanks
Sent from my R800i using XDA Premium App
OMG, I have to do this My Xperia Play is Broken (only got it month ago) ;(
Sonny788 said:
OMG, I have to do this My Xperia Play is Broken (only got it month ago) ;(
Click to expand...
Click to collapse
I already send invitation for gtalk.
BTW:
Trim area repair process is now tested and working for NEO PLAY and ARC
SETool
When i try to start up SETool it comes up with an error message saying "SETOOL2 SMART CARD NOT FOUND" do i have to buy an setool smart card or am i missing something here?
Blessi360 said:
When i try to start up SETool it comes up with an error message saying "SETOOL2 SMART CARD NOT FOUND" do i have to buy an setool smart card or am i missing something here?
Click to expand...
Click to collapse
alejandrissimo has a smart card, and you will connect remotely to it as per his instructions.
Alejandrissimo said:
Hello again
Sometimes we can brick our devices by a bad unlock, flashing process, or simply bad luck.
The phone doesn't turn on and there is a Red Led Of Death when pressing power button. Even with a GREEN led when we plug the phone with back key pressed the computer detect the phone as "unknown device" so there is no chance to get fixed by Flashtool or SEUS/PC Companion.
Well this problem normally means that the bootloader is broken or damaged. So, in order to fix it we need to write a new SEMCboot and after this we were able to flash a full and fresh firmware with flashtool and unbrick our Xperia.
This process like unlocking process requires SETool dongle/box and a paperclip to make a testpoint to put the phone in flash mode and be able to write the SEMCBoot.
I can help to anyone with a bricked Xperia Arc/Play/Neo/Pro just make send me a PM.
Like unlocking process you will need this 3 programs:
SETool software for unlocking
USB Over network client for remote dongle
Teamviewer client for remote support and guide
THIS PROCESS IS FREE
anyway if you want me to buy a Dr. Peper just
Click to expand...
Click to collapse
SEI IL MIO MITO....you are my idol...in five minutes you have resolved the problem of the sim...in italian language :" TI SEI MERITATO LA DONAZIONE, SENZA TE ORMAI ERO DISPERATO E STAVO PER MANDARLO IN ASSISTENZA A MINIMO 100 EUR...GRAZIE MILLE..."
unlock and fastboot working !!!!!!!!
hi i find solution for my probleme i use omnius se and choose unlock network by certificat license 1day 15euro just need connect testpoint now my r800i working perfect in fastboot mode i flash doom kernel and cm7 without probleme
by
How long was it until you received assistance from him remotely?
no need help
you don't need help by nothing and no need other software or hardware just domwload omnius buy license 1 day 15 euro for unlock android launch omnius connect server with your login and select xperia play and choose unlock by certificat connect test point push power quikly ( 3 second) disconect testpoint and put usb cable on your pc new driver found and auto install now omnius recognise your phone and unlock and repair fastboot on your phone now reboot your phone with hold search button you got a blue led conect your phone on your pc and install adb driver for fastboot now you can flash any kernel or rom in your r800i
sorry for my english
by
soudara said:
you don't need help by nothing and no need other software or hardware just domwload omnius buy license 1 day 15 euro for unlock android launch omnius connect server with your login and select xperia play and choose unlock by certificat connect test point push power quikly ( 3 second) disconect testpoint and put usb cable on your pc new driver found and auto install now omnius recognise your phone and unlock and repair fastboot on your phone now reboot your phone with hold search button you got a blue led conect your phone on your pc and install adb driver for fastboot now you can flash any kernel or rom in your r800i
sorry for my english
by
Click to expand...
Click to collapse
Ok i will try this on my r800at which is now r800a by means of firmware upgrade. But i have one question. In order to hit the testpoint my phone needs to have its battery removed and if that and the USB cable are both gone will pressing the Testpoint and the Power button at the same time do anything?
hi
yes you need battery inserted corectely for testpoint
could you please help me out? I have a working fastboot and flashtooll detects my phone too. the problem is this
(bootloader) Erase operation complete, 2184 bad blocks encountered
OKAY [ 1.513s]
erasing 'cache'...
(bootloader) Erase of partition 'cache' requested
FAILED (remote: Partition not found, or permission denied)
Click to expand...
Click to collapse
I believe that's the reason why my phone says low on space and some firmwares won't flash. Im quite new to SE phones :|
pls pm me asap. im sure my semc is bad. coz now my phone won't flash any firmware. can't re unlock bootloader too.
and omnius can't read semc error code A57CF58A77DB6368
hi
has anybody actually had any help off Alejandrissimo i have messaged him but not noticed anybody saying he has actually fixed it for them ?
He is highly skilled and CAN fix a bricked device, I've had help off him... even free advice on fixing it myself
Please remember time differences i spoke to him at 10:30pm and he was just having lunch
Sent from my R800i using XDA App
elspanish88 said:
He is highly skilled and CAN fix a bricked device, I've had help off him... even free advice on fixing it myself
Please remember time differences i spoke to him at 10:30pm and he was just having lunch
Sent from my R800i using XDA App
Click to expand...
Click to collapse
ahh right thanks mate really hope he can fix it would be buzzing i sent him a message yesterday hopefully get a reply
Did you email him or message him on here.. i emailed and always got a response the same day that was only a couple weeks ago
Sent from my R800i using XDA App
Hi everyone, there are 4 days for unlock bootloader for free on Omnius.
There are a lot of ppl who have Bootloader Unlock allowed: NO! and as u know it can only be unlocked by pay method. Well you are lucky if you are seing this post because if you go to omnius page: http://www.omnius-server.com/ and register you can unlock for free your 2011 xperia phone. I already try this method on my brother's xperia mini pro (sk17) and it works without pay anything.
If you have some question be free to ask here, I will help you in your unlocker, its a little diffficult but can be done!.
Good luck!
Edit:
STEPS:
Open omnius, log into your account.
Select your device from list.
Press unlock -> Bootloader
It will show you an image where your testpoint is located.
- Next steps are for mini pro -
Cancel the process. Now turn off your xperia mini pro. Remove your batter
Localizate the testpoint and put there your tool (It can be a paper clip with cable).
Put the clip on your test point and the cable to the ground (omnius will help you with this) then connect your phone at the computer.
Windows will recognize new driver and it will fail with installation. Dont worry, open device manager and right click that device and choice update driver. Select install from my computer. Go to omnius installation (c->program files -> omnius -> drivers) and accept. It will show you a warning telling that those arent the proper drivers but its ok, just press install anyway.
Thats it, it will install you the drivers you need.
Now unplug test point and put your battery on (usb cable must be conected).
Now unplug the usb now.
Put usb again on your xperia and once again it will show you new device founded, follow the same step before, device manager, update, from computer, etc, etc). Thats it, now open omnius and press unlock, bootloader and it will succes.
For anothers devices it will be the same but with different testpoint, steps may be different but omnius will show you the way.
I hope this can help you, because is one day left.
Quick question paisano is it only the bootloader or does it unlock the sim and fastboot mode??
ginryu said:
Quick question paisano is it only the bootloader or does it unlock the sim and fastboot mode??
Click to expand...
Click to collapse
unlock bootloader means that you can use fastboot mode.
Also you can unlock your sim for use any operator you want.
ocovarr112 said:
unlock bootloader means that you can use fastboot mode.
Also you can unlock your sim for use any operator you want.
Click to expand...
Click to collapse
Well not exactly I unlocked the bootloader and was unable to access fast boot mode on my lww due to the simlock. I had to do a full unlock before had access to fastboot.
ginryu said:
Well not exactly I unlocked the bootloader and was unable to access fast boot mode on my lww due to the simlock. I had to do a full unlock before had access to fastboot.
Click to expand...
Click to collapse
Well before I do this it was: unlock bootloader allowed: NO
Then I do this and it works pretty well.
ocovarr112 said:
Well before I do this it was: unlock bootloader allowed: NO
Then I do this and it works pretty well.
Click to expand...
Click to collapse
But do you have access to fastboot?? Connect the phone to the PC while it is off and you are holding the volume up key the notification led should turn on blue.
ginryu said:
But do you have access to fastboot?? Connect the phone to the PC while it is off and you are holding the volume up key the notification led should turn on blue.
Click to expand...
Click to collapse
Yes I have. Already flashed fxp kernel and CM9 and it works great.
Good to know I had to pay to unlock it
Funny and usefull...thank for sharing...
Till-Kruspe said:
Funny and usefull...thank for sharing...
Click to expand...
Click to collapse
If you wanna thank me then press thanks button, thats what it is for.
ocovarr112 said:
If you wanna thank me then press thanks button, thats what it is for.
Click to expand...
Click to collapse
8 thank per day is not enough for you mate...
One big thanks.
Sent from my Live With Walkman using Tapatalk
I apparently have to have a testpoint. Any help?
raginruski said:
I apparently have to have a testpoint. Any help?
Click to expand...
Click to collapse
You can do it with a clip. You can search for YouTube videos about test point or unlocking Xperia 2011 phones.
Hello!
So this method works for live with walkman? Can I install costum roms after that? Is my warranty still valid after I unlock bootloader with this method / can I re-lock bootloader if needed?
Thank You!
Have a nice day
livingcode said:
Hello!
So this method works for live with walkman? Can I install costum roms after that? Is my warranty still valid after I unlock bootloader with this method / can I re-lock bootloader if needed?
Thank You!
Have a nice day
Click to expand...
Click to collapse
Yes, this works with LWW.
Yes, you can install custom ROMs after it.
Warranty is void if bootloader is unlocked.
Yes, bootloader can be relocked.
I have a question, in the program when i try unlock bootloader they tell to retire the batery off and reconect and connect the testpoint to phone's ground.... and next shortly press power buton and disconnect testepoint.
i dont understand this step, testpoint? wtf?
Any help
So I connected the test point and it shows up on my computer and then I shortly press the power button and when I reconnect it, it still doesn't proceed. Help please?
raginruski said:
So I connected the test point and it shows up on my computer and then I shortly press the power button and when I reconnect it, it still doesn't proceed. Help please?
Click to expand...
Click to collapse
First take out battery from phone then take some wire and connect it,to ground (you can find testpoint locations on omnius site) ,also be sure that drivers are installed (you
can find them in S1tool) now comes tricky part where you need to do in few seconds but first check is testpoint connected,so tricky part is that you need to disconnect testpoint and put battery while is sending loader or error will come up (phone will be ok)
I hope you will understand.
Sent from my WT19i using Tapatalk
It WORKS, thanks ocovarr
Hi guys,
Here the new NSS version (0.50) that allows sim unlock if your Lumia is rooted (710,800). How to unlock:
1. Make sure all drivers are installed, phone is visible by NSS in Normal, OSBL and NAND mode
2. Make sure you have Qcom loader
3. Plug the phone via USB cable
4. Start NSS, go to Simlocks, WP7, press Unlock
5. Follow on screen instructions
Unlock works for PIN and PUK blocked phones.
Download
Regards, Chris
This is to make my Lumia a SIM free to use any other carrier or just when we need to tap PIN or PUK to unlock sim card?
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
What mean #6?
6. Press unlock again to restore the phone to original
I did unlock, I taped PIN so I need to connect again and change mode do OSBL and press UNLOCK second time?
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
what do you mean by install all drivers, it wont detect when i just plug into usb (normal mode) but when i am in obsl mode it says "nand disk drive" and it says it cant read device
Bph&co said:
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
Click to expand...
Click to collapse
Bph&co said:
Hi,
Yes it is to unlock the sim restriction, so the phone can be used on any carrier. Just the guys at MS are on some strange drug, the unlock
code they call - PIN, and the unblock code - PUK.
BR
Click to expand...
Click to collapse
But still need connect again and press unlock second time?
fivesevenn said:
what do you mean by install all drivers, it wont detect when i just plug into usb (normal mode) but when i am in obsl mode it says "nand disk drive" and it says it cant read device
Click to expand...
Click to collapse
There are few drivers needed - Zune, Nokia Care Suite, Microsoft USB disk drivers. Make sure Zune and NCS are installed and working.
djtonka said:
But still need connect again and press unlock second time?
Click to expand...
Click to collapse
Second time is not needed. It is just restores the baseband firmware to original.
I've been trying to sim unlock my phone all day, but I keep on getting this:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
in windows xp its not work?
I used NSS the other day on my DLOAD and to my surprise it magically unlocked just by pressing detect. I was over the moon! Saved me moneyyy!
monstercable said:
I've been trying to sim unlock my phone all day, but I keep on getting this:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
Click to expand...
Click to collapse
Hi,
When the phone restarts after the change to OSBL mode command, does it stay with dark screen,
or just enters the long boot process and comes in Normal Mode ?
If the latter, you maybe have baseband/ROM mismatch, where some commands are not recognized -
e.g. the restart. Battery level is also not read correct. The solution is to restore to Nokia loader (only on 710)
and flash some version to make sure ROM and baseband files are matched, then install QCOM and do
the sim unlock procedure.
BR
Bph&co said:
Hi,
When the phone restarts after the change to OSBL mode command, does it stay with dark screen,
or just enters the long boot process and comes in Normal Mode ?
If the latter, you maybe have baseband/ROM mismatch, where some commands are not recognized -
e.g. the restart. Battery level is also not read correct. The solution is to restore to Nokia loader (only on 710)
and flash some version to make sure ROM and baseband files are matched, then install QCOM and do
the sim unlock procedure.
BR
Click to expand...
Click to collapse
Yes I dont think the battery is correct either...I have the 710 so how do i restore to nokia loader?
monstercable said:
Yes I dont think the battery is correct either...I have the 710 so how do i restore to nokia loader?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1620629
Will this work for any carrier or only for the common ones? I have T-Mobile UK and they have this new lock with Orange UK...
Bph&co said:
Hi guys,
Here the new NSS version (0.50) that allows sim unlock if your Lumia is rooted (710,800). How to unlock:
1. Make sure all drivers are installed, phone is visible by NSS in Normal, OSBL and NAND mode
2. Make sure you have Qcom loader
3. Plug the phone via USB cable
4. Start NSS, go to Simlocks, WP7, press Unlock
5. Follow on screen instructions
Unlock works for PIN and PUK blocked phones.
Download
Regards, Chris
Click to expand...
Click to collapse
hey man you are a genius! i have been digging up and trying to find a sim unlock solution since i bought this phone and to no avail. i happened to buy an unlock code for my lumia 710 so i am unable to test your solution to see if it works. i wish you had revealed this method earlier so i would have donated the money to you instead! i am waiting to see if people were successful with your method. for my knowledge though...does it have anything to do with sdb5 partition? thanks again and good luck!
For lumia800?
Sent from my Lumia800 using XDA Windows Phone 7 App
Deeco7 said:
I used NSS the other day on my DLOAD and to my surprise it magically unlocked just by pressing detect. I was over the moon! Saved me moneyyy!
Click to expand...
Click to collapse
Hi, in another post you pointed out that your phone was DLOAD and you flashed a generic firmware to your phone which gave you Qualcomm in NSS, could you please give more information on this, which firmware etc. so hopefully it'll work for us too.
/edit - Weird this. If I restart my phone with Vol up then insert USB (till buzz) and then click Detect on NSS it jumps straight to OSBL Mode - WP7 Qualcomm, I can't do anything with it at this stage so maybe (hopefully) someone will have an idea?
dgwebb said:
Hi, in another post you pointed out that your phone was DLOAD and you flashed a generic firmware to your phone which gave you Qualcomm in NSS, could you please give more information on this, which firmware etc. so hopefully it'll work for us too.
/edit - Weird this. If I restart my phone with Vol up then insert USB (till buzz) and then click Detect on NSS it jumps straight to OSBL Mode - WP7 Qualcomm, I can't do anything with it at this stage so maybe (hopefully) someone will have an idea?
Click to expand...
Click to collapse
That's exactly what I did, and when I pressed 'Detect' my sim unlocked. Try putting a different sim in . But, I want to know what bootloader have due to the confusion of NSS detecting my phone as 'WP7 Qualcomm'.
Deeco7 said:
That's exactly what I did, and when I pressed 'Detect' my sim unlocked. Try putting a different sim in . But, I want to know what bootloader have due to the confusion of NSS detecting my phone as 'WP7 Qualcomm'.
Click to expand...
Click to collapse
Just detect on it's own shouldn't unlock it, you'd need to press the unlock button wouldn't you? In settings/About it should say bootloader version, mine is 7.35.0.0. I currently have a vodaphone sim in my phone (locked to Orange) and it doesn't unlock so it's trying to get to the bottom of how yours managed to unlock as qualcomm. Which drivers do you have installed for instance?
deylo said:
...does it have anything to do with sdb5 partition? thanks again and good luck!
Click to expand...
Click to collapse
Hi,
If you have a phone, check what the Simlock saves as backup. Also after unlock you can try the Restore button and see what is loaded.
BR
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
fastboot flashing unlock
Click to expand...
Click to collapse
this message showed up in terminal:
OKAY [ 0.162s]
Click to expand...
Click to collapse
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
При входе в личный кабинет (верхняя строка настроек) телефон выдает предупреждение о разблокировке загрузчика?
Можете подробнее описать, как вы добились такого результата?
volkodav1975 said:
When you log in to your account (the top line of settings) the phone gives a warning that the bootloader is unlocking?When you log in to your account (the top line of settings) the phone gives a warning that the bootloader is Unlocked?
Can you describe in more detail how you achieved this result?
Click to expand...
Click to collapse
After updating to Magic UI 6.0 i booted into fastboot and executed this command: fastboot flashing unlock.
and no it didn't give me any warning about bootloader when i signed in into my acc.
Ww222 said:
После обновления до Magic UI 6.0 я загрузился в fastboot и выполнил эту команду: fastboot flashing unlock.
и нет, это не дало мне никакого предупреждения о загрузчике, когда я вошел в свой аккаунт.
Click to expand...
Click to collapse
яI am Russian, it is difficult to write here, but a very interesting result. I'll try to do it at home and see what happens.
volkodav1975 said:
яI am Russian, it is difficult to write here, but a very interesting result. I'll try to do it at home and see what happens.
Click to expand...
Click to collapse
please inform me about the result if you tried it.
Ww222 said:
please inform me about the result if you tried it.
Click to expand...
Click to collapse
The result is the same as yours. Huawei hasn't had such a screen for a long time. Perhaps in the future something will give for us on the new Honor.
Ww222 said:
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
this message showed up in terminal:
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
Click to expand...
Click to collapse
i have edl firehose for honor 50, 50 lite, 60, 60 pro & 70, we can dump gpt & once we have gpt we can create a unbrick package, Interested user Please DM me..
Ww222 said:
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
this message showed up in terminal:
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
Click to expand...
Click to collapse
That's bizarre! Are you sure you were doing that on Honor 50? Could you root your deivice by using Magisk?
I am very interested in your device.
me to
my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
rnadow said:
me to
View attachment 5766267my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
Click to expand...
Click to collapse
moyuzai said:
That's bizarre! Are you sure you were doing that on Honor 50? Could you root your deivice by using Magisk?
I am very interested in your device.
Click to expand...
Click to collapse
yes pretty sure i have for honor 50 & 50 Lite, but i am asking for EDL unbrick package not root
mark332 said:
yes pretty sure i have for honor 50 & 50 Lite, but i am asking for EDL unbrick package not root
Click to expand...
Click to collapse
Are you interested in selling your Honor 50 & 50 Lite, I would love to pay an extra price that higher than you bought it.
rnadow said:
me to
View attachment 5766267my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
Click to expand...
Click to collapse
Hi, are you able to root you Honor x9? If so,
Are you interested in selling your device? I would love to pay an extra price that higher than you bought it.
moyuzai said:
Hi, are you able to root you Honor x9? If so,
Are you interested in selling your device? I would love to pay an extra price that higher than you bought it.
Click to expand...
Click to collapse
I have entered 9008 through the short contact point, but I do not have files such as firehose or GPT (I do not know what is required for Qualcomm processor to flash). I don't want to sell it, because I'm in China, and you can buy it at Amazon at a very cheap price. Thank you for your reply
mark332 said:
You can try to enter 9008 through the short contact point. The two contacts circled in the picture are short circuited. At least I enter in this way, and I don't understand the rest.
Click to expand...
Click to collapse
mark332 said:
i have edl firehose for honor 50, 50 lite, 60, 60 pro & 70, we can dump gpt & once we have gpt we can create a unbrick package, Interested user Please DM me..
Click to expand...
Click to collapse
Hello, friend, do you have the firehose of Qualcomm 680 processor? Its code is sm6225
rnadow said:
I have entered 9008 through the short contact point, but I do not have files such as firehose or GPT (I do not know what is required for Qualcomm processor to flash). I don't want to sell it, because I'm in China, and you can buy it at Amazon at a very cheap price. Thank you for your reply
Click to expand...
Click to collapse
Hey man, I am living in China as well. Are you able to root it or unlock its bootloader? We can discuss the price.
moyuzai said:
Hey man, I am living in China as well. Are you able to root it or unlock its bootloader? We can discuss the price.
Click to expand...
Click to collapse
解锁应该不太可能，自己折腾玩玩而已。前面已经说了，你可以去海淘
rnadow said:
解锁应该不太可能，自己折腾玩玩而已。前面已经说了，你可以去海淘
Click to expand...
Click to collapse
好吧，感谢老哥回复！
Hello I am trying to boot my phone to recovery mode to do a factory reset since it keeps restarting and it does not passes the Logo screen, it is stuck on a looping state. I tried to access the recovery mode usign the volume buttons but is not working, it keeps restarting. I did not enable debugging usb since I never knew I was going to need it. Any help will be greatly appreciated.
Hello everyone.
i could you some help as I got a phone for my partner. I got her an honor 70 Pro Plus. I want to know if it's possible to root it and install a working Android system instead of trying to bypass Google by using G-Box or gspace. At this stage. I would like to put any operating system that would work with the chipset it has as I haven't done anything like this in years, so I could use some help. in years, I mean about 15 year
Thank in advance
I've tried everything to get oem unlock to show up and nothing
Red_gaming said:
I've tried everything to get oem unlock to show up and nothing
Click to expand...
Click to collapse
Mhm me too, but I've got a a03s basically same thing 3gb of ram, 32gb storage, and I've got a galaxy note 9 same issue.. bottom line, Samsung doesn't like you to have your phones bootloader unlocked on some snapdragon devices... My issue is my chipset Is Helio P35 I have no idea what that is, but it's not snapdragon lol, in your case you may have the same chipset, but in my note 9, it's a snapdragon, idk why Samsung does this... Sorry to say buddy
Red_gaming said:
I've tried everything to get oem unlock to show up and nothing
Click to expand...
Click to collapse
as they said, samsung doesnt like the unlocking of your A02s bootloader because its a snapdragon. However, if you can, try the A03s. It has a mediatek chipset, and should work.
Swyen said:
as they said, samsung doesnt like the unlocking of your A02s bootloader because its a snapdragon. However, if you can, try the A03s. It has a mediatek chipset, and should work.
Click to expand...
Click to collapse
A02s can be unlocked. All you have to do is enable it in the Developer settings, Turn off your device, Go to Download mode by pressing both Volume UP and DOWN button while plugging in your charger or USB cable and then, long press on the Volume UP button as specified on the screen to unlock it.
This will reset the phone and then, after reboot, just enable the developer settings and you should see that OEM Unlocking is greyed out. This means that it has been unlocked.
tangy912 said:
A02s can be unlocked. All you have to do is enable it in the Developer settings, Turn off your device, Go to Download mode by pressing both Volume UP and DOWN button while plugging in your charger or USB cable and then, long press on the Volume UP button as specified on the screen to unlock it.
This will reset the phone and then, after reboot, just enable the developer settings and you should see that OEM Unlocking is greyed out. This means that it has been unlocked.
Click to expand...
Click to collapse
Keep in mind that some phones are US models, and US Snapdragon models from Verizon generally cannot be unlocked. And keep in mind as well that some models (ex. A037W for A03s) dont support the procedure you provided.