Hi guys,
Here I have Amazfit Bip wich I cant connect to phone because when it asks to confirm pairing I cannot click on YES on the screen.
Any idea what should I have to do?
Thank you!
Hello, today I had the same problem. After installing some firmwares the screen doe not recognize any touch.
I think it is a fault happening while installing the firmware.
First i went back to the original chinese rom and the upgraded to the actual via ADB.
Aft that, everyting is fine again.
By the way. Are you too have the problem with lagging stepcount?
skylow said:
Hello, today I had the same problem. After installing some firmwares the screen doe not recognize any touch.
I think it is a fault happening while installing the firmware.
First i went back to the original chinese rom and the upgraded to the actual via ADB.
Aft that, everyting is fine again.
By the way. Are you too have the problem with lagging stepcount?
Click to expand...
Click to collapse
Hi mate,
Yes I had issue with stepcount.
But can you tell me how could I repair the watch as I cant pair it with the smartphone?
Thanks!
masterross said:
Hi mate,
Yes I had issue with stepcount.
But can you tell me how could I repair the watch as I cant pair it with the smartphone?
Thanks!
Click to expand...
Click to collapse
In my case i flashed "huangeheUS-1.3.3a-installer". Then deleted all the installation trash.
I did a full wipe:
adb shell reboot bootloader
fastboot erase data
fastboot erase cache
fastboot reboot
After that the screen was working again but the watch was in Chinese language.
So i flashed "Stratos_Stock_US_Firmware_2.3.5.0". Now everything is working and in English language.
Thx, but your watch is AmazFit PACE and mine is AmazFit BIP wich doesnt have usb interface unfortunately
masterross said:
Thx, but your watch is AmazFit PACE and mine is AmazFit BIP wich doesnt have usb interface unfortunately
Click to expand...
Click to collapse
Oh, i thought that the Bip has the same interface. Sorry.
Guys,
I opened the watch and cant see anything wrong.
I de-attach and attach battery, clean everything but still touch not works.
Related
Dears,
I would like to know If there are any method or procedure to reset the Amazfit Bip to its original configuration or reset bluetooth Mac address.
I am asking this because after installing the english language pack (res and then fw) ,i've tryed all but I can't pair Amazfit BIP with my Cell phone.
I've tryed with other phones but mifit can't find the device and requests customer support,
Someone can help me ?
On the bluetooth app I can see the BIP , so how is the problem ?
Thanks in advance.
same problem
i've also experienced the same thing after update mi fit yesterday...just bought mine earlier this week...really hope it can be fix
Rejoice! Amazfit saved!
u have 2 steps 2 solve this problem.
step 1 : unpair ur bip in mi fit app...and uninstall any 3rd party apps which connected to ur bip...and then using other smartphone,*install mi fit app,and than pair with ur bip,that way,after connected,it will update ur bip into stock firmware...after done,unpair device and repeat* using ur own smartphone....
step 2 : install 'notify and fitness' app,connect by following its instruction...go to https://www.google.com/amp/s/forum....azfit-language-firmware-english-t3670195/amp/ to download en.firmware ver 0.0.9.14 which is newest,and update using 'notify and fitness' thru custome firmware,browse for the 0.0.9.14 files....
-that's all and good luck
thank you so much, you saved my life
Does the device allow user to turn off bluetooth and gps?
ronexdlanor said:
u have 2 steps 2 solve this problem.
step 1 : unpair ur bip in mi fit app...and uninstall any 3rd party apps which connected to ur bip...and then using other smartphone,*install mi fit app,and than pair with ur bip,that way,after connected,it will update ur bip into stock firmware...after done,unpair device and repeat* using ur own smartphone....
step 2 : install 'notify and fitness' app,connect by following its instruction...go to https://www.google.com/amp/s/forum....azfit-language-firmware-english-t3670195/amp/ to download en.firmware ver 0.0.9.14 which is newest,and update using 'notify and fitness' thru custome firmware,browse for the 0.0.9.14 files....
-that's all and good luck
Click to expand...
Click to collapse
Thank you
It worked in my case also.
Happy new year!
Forgetting the watch in the paired Bluetooth devices kind of worked for me.
ronexdlanor said:
u have 2 steps 2 solve this problem.
step 1 : unpair ur bip in mi fit app...and uninstall any 3rd party apps which connected to ur bip...and then using other smartphone,*install mi fit app,and than pair with ur bip,that way,after connected,it will update ur bip into stock firmware...after done,unpair device and repeat* using ur own smartphone....
step 2 : install 'notify and fitness' app,connect by following its instruction...go to https://www.google.com/amp/s/forum....azfit-language-firmware-english-t3670195/amp/ to download en.firmware ver 0.0.9.14 which is newest,and update using 'notify and fitness' thru custome firmware,browse for the 0.0.9.14 files....
-that's all and good luck
Click to expand...
Click to collapse
Thank you so much buddy!
It doesn't work for me :crying:
same here
Watch works fine. Connected via bluetooth. Gadgetbridge works fine. Notify & fitness for amazfit works fine. Mi fit says to contact customer service. Whole day I can't make it to see the watch. Tried uninstalling reinstalling, tried different version of firmware and mifit, NO SUCCESS.
Firmware V0.1.0.89 Mifit 3.3.0.2.
My phone see amazfit ,pair but can not be connected!what to do?
Sent from my VTR-L29 using Tapatalk
I had same issue;
Turned the phone and watch off and then on again.
Opened the MI Fit app to pair and layed the watch on top of my phone.
Then it worked....
SOLVED
brizoles said:
Watch works fine. Connected via bluetooth. Gadgetbridge works fine. Notify & fitness for amazfit works fine. Mi fit says to contact customer service. Whole day I can't make it to see the watch. Tried uninstalling reinstalling, tried different version of firmware and mifit, NO SUCCESS.
Firmware V0.1.0.89 Mifit 3.3.0.2.
Click to expand...
Click to collapse
Amazfit Bip must not be connected to more than one mi account. The guy that I bought the watch from, deleted mifit from his mobile without erasing the watch from his mifit account. When he did, my problem was solved.
brizoles said:
Watch works fine. Connected via bluetooth. Gadgetbridge works fine. Notify & fitness for amazfit works fine. Mi fit says to contact customer service. Whole day I can't make it to see the watch. Tried uninstalling reinstalling, tried different version of firmware and mifit, NO SUCCESS.
Firmware V0.1.0.89 Mifit 3.3.0.2.
Click to expand...
Click to collapse
I am in the same boat the MiFit doesn't want to work I tried in iOS and Android I will use other Android. The worst is that my login with Google is not working on Android if works in iOS but not difference not BT connection.
Please another suggestion because the other apps detect the watch right away but we need the MiFit for any manage of the phone.
Trade
I fixed the simple way is reset to the default the watch, the curious thing was the Bluetooth address changed every time you made that and then the Mift can recognize the watch.
How to reset to default? My watch does not show Configs icon, and Mifit doesnt connect
After update i had "conectese a la aplicacion para reintentar" and simple phone bluetooth unpair worked excelently. After unpair I just reopen mi fit app, it connected to watch, and begun resource update procedure. After that my watch is working as it was before updating- no issues at all
i could not connect my watch as i tried everything but atlast no blue tootch connection is there , i tried through all process mentioned above but still not connecting please if anybody could guide me the process of connecting it can whats app me on my number also +919717989349. need help please guide urgent .
You can do a Factory Reset now (maybe not in the earliest versions). The manual says :
From the home screen of the watch, swipe left you can access “Watch face”, “Long press the button”, “Adjust brightness”, “Find device”, “About”, “Factory reset”, and “Turn off” in watch “Settings”. (This is the sentence in the manual.)
You need to scroll down because you only see the first three options. After the factory reset it paired again.
Mobtel063 said:
My phone see amazfit ,pair but can not be connected!what to do?
Sent from my VTR-L29 using Tapatalk
Click to expand...
Click to collapse
Delete pair with Amazfit, install MiFit and its connect to device.
My Amazfit Pace´s screen dont respond at all. Nothing. But the watch still works as a watch. I had flash the watch with the last firmware from Paceficator Project but it still dont respond. So all I want is to remove the QR Code and use the Watch as a Watch. The problem is that when I try to pair my watch with my Phone the next step is to respond if I´ll use the watch in the left or right arm. But the touch screen dont work, so I´m stucked with this QRCode.
You need to pair in order to get the correct time on watch. I suggest that you use a "remote control" app while watch is connected to the computer so you can send remote "taps" to the watch (of course, it can be done via adb commands as well).
crforti1972 said:
My Amazfit Pace´s screen dont respond at all. Nothing. But the watch still works as a watch. I had flash the watch with the last firmware from Paceficator Project but it still dont respond. So all I want is to remove the QR Code and use the Watch as a Watch. The problem is that when I try to pair my watch with my Phone the next step is to respond if I´ll use the watch in the left or right arm. But the touch screen dont work, so I´m stucked with this QRCode.
Click to expand...
Click to collapse
Are you sure you flashed a Pace firmware? Or a Stratos firmware?
If touchscreen isn't working, you probably did the second one.
Check this thread and let us know if it is your case: https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
Correct Pace Firmware
Saratoga79 said:
Are you sure you flashed a Pace firmware? Or a Stratos firmware?
If touchscreen isn't working, you probably did the second one.
Check this thread and let us know if it is your case: https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
Click to expand...
Click to collapse
My watch was not working the touch before I flash the Pace firmware. I thought that the problem was the original old firmware. But even though I flash the correct firmware nothing works. I flashed two times.
remote dont work
lfom said:
You need to pair in order to get the correct time on watch. I suggest that you use a "remote control" app while watch is connected to the computer so you can send remote "taps" to the watch (of course, it can be done via adb commands as well).
Click to expand...
Click to collapse
I've tried a remote but don't work. I mean that the app works but don't connect to my Pace.
I don't know why. But maybe there is another version. Can you share the app page?
crforti1972 said:
I've tried a remote but don't work. I mean that the app works but don't connect to my Pace.
I don't know why. But maybe there is another version. Can you share the app page?
Click to expand...
Click to collapse
This is the one I use (requires Java and adb installed properly to work, check README):
https://github.com/MajeurAndroid/Adb-Remote-Screen
lfom said:
This is the one I use (requires Java and adb installed properly to work, check README):
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
Was exactly this one that I've tried. I follow the readme file instructions. It open but don't connect to my watch.
If you don't follow the correct instructions its don't even open. Just return an error. I've installed the last version of Java and run it on a console window. It open but don't connect to my watch.
Other apps such as the flash install app, connect fine to the watch.
crforti1972 said:
Was exactly this one that I've tried. I follow the readme file instructions. It open but don't connect to my watch.
If you don't follow the correct instructions its don't even open. Just return an error. I've installed the last version of Java and run it on a console window. It open but don't connect to my watch.
Other apps such as the flash install app, connect fine to the watch.
Click to expand...
Click to collapse
Do you have adb installed properly? Can you see the watch when you run "adb devices"? If yes, try to edit the file "local.properties" to point to the correct location of adb, or better yet, put the adb dir in the PATH environment variable.
lfom said:
Do you have adb installed properly? Can you see the watch when you run "adb devices"? If yes, try to edit the file "local.properties" to point to the correct location of adb, or better yet, put the adb dir in the PATH environment variable.
Click to expand...
Click to collapse
I believe that is correct. I install the adb in the root of my computer (c:\adb) and include it in the Path of the computer.
When I flashed my watch the adb comands found my watch. And when I run "adb devices" (from any directory/folder) it returns "daemon started successfully", "List of the devices attached" and "232b0f17 device". So I believe that my adb is working properly.
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
xxxanmol said:
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
Click to expand...
Click to collapse
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
i solved it finally
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
xxxanmol said:
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
same in here... Amazfit Verge
When I run the command .. it doesn't start in fastboot
kyawzinooygn said:
same in here... Amazfit Verge
Click to expand...
Click to collapse
When I run the command adb shell reboot bootloader, it doesn't start in fastboot. How they solved it?
Can some one help me. I have used "All in one tool" and uninstalled some apks.. Seems they are important apps. Watch is now struck in boot loop that comes after amazfit A symbol. Using the all in one tool, I can again go to this fastboot mode as shown in screenshot. Not sure how to reinstall the uninstalled apks. I am not tech savvy. Can some one help me step by step
xxxanmol said:
i solved it finally
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
Can you help me with boot loop. Uninstalled some apks with the all in one tool (seems some important apks) and the amazfit verge is struck in boot loop as shown in image.
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you
Hi , so i bought a Stratos 3 China version (A1928) and was on 4.0.19.5 version and did a trial run with it and the gps was working well. However, after updating to 4.2.6.0 and flashing it with the stock US rom , the searching of GPS was prompt with the error " No gps signal detected , please try again outdoors" . After searching the forum , i tried downgrading to 4.2.5.0 and it still doesn't seems to work. Any solution to work around it ?
Gps problem 4.2.7.0
I have the same GPS problem out I am in 4.2.7.0 and the data is random. I did your running and hiking.
I am a little disgusted by the oit saying given GPS at the top with the Stratos 3 and there disaster
The last time I had GPS localisation failure I've reboot the watch a all was working well after that. But I stay in 4.2.5.0 ftm
winni21 said:
The last time I had GPS localisation failure I've reboot the watch a all was working well after that. But I stay in 4.2.5.0 ftm
Click to expand...
Click to collapse
I reset the watch and it remains in 4.2.7.0, how to put in 4.2.5.0 and necessarily forgot the warranty, my stratos is 2 weeks old
bartnissa said:
I reset the watch and it remains in 4.2.7.0, how to put in 4.2.5.0 and necessarily forgot the warranty, my stratos is 2 weeks old
Click to expand...
Click to collapse
You need to unlock bootloader first then use this thread:
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
(Check previous version section) don't forget to factory reset the watch after flashing the fw.
winni21 said:
You need to unlock bootloader first then use this thread:
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
(Check previous version section) don't forget to factory reset the watch after flashing the fw.
Click to expand...
Click to collapse
winni 21 if I understood correctly I downloaded Install, that is to say this firmware 'Stratos3_Stock_US_4.2.5.0_Firmware.zip'
and I run with the watch connected to the pc and let it be ?
my model is the A1929 US
bartnissa said:
winni 21 if I understood correctly I downloaded Install, that is to say this firmware 'Stratos3_Stock_US_4.2.5.0_Firmware.zip'
and I run with the watch connected to the pc and let it be ?
my model is the A1929 US
Click to expand...
Click to collapse
If you have your bootloader unlocked yes that's it.
When it's done don't forget to factory reset the watch
winni21 said:
If you have your bootloader unlocked yes that's it.
When it's done don't forget to factory reset the watch
Click to expand...
Click to collapse
I don't know if it's a bootloader and I'm afraid of blocking my watch.
I do not see a simple tutorial for beginners how to install etc ...
thank you
bartnissa said:
I don't know if it's a bootloader and I'm afraid of blocking my watch.
I do not see a simple tutorial for beginners how to install etc ...
thank you
Click to expand...
Click to collapse
here is what I did, install adb setup and then as on the cmd adb devices image, it's ok that means I have the bootloader ???? :confus:
how to reset my watch connected with the computer or the button on the watch to disconnect to the computer.
if I reset the factory settings, it will come back to 4.2.7.0 ?
thanks
bartnissa said:
here is what I did, install adb setup and then as on the cmd adb devices image, it's ok that means I have the bootloader ???? :confus:
how to reset my watch connected with the computer or the button on the watch to disconnect to the computer.
if I reset the factory settings, it will come back to 4.2.7.0 ?
thanks
Click to expand...
Click to collapse
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
winni21 said:
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
Click to expand...
Click to collapse
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do?
winni21 said:
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
Click to expand...
Click to collapse
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
bartnissa said:
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
Click to expand...
Click to collapse
ok so unzip Stratos3_Stock_US_4.2.5.0_Firmware.zip then run flash_US.bat wait process to be done.
once watch is rebooted wipe it
bartnissa said:
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
Click to expand...
Click to collapse
watch hangs on screen no command with triangle exclamation mark.
I am disgusted
on which stage it has stopped? reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
winni21 said:
on which stage it has stopped? reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
Click to expand...
Click to collapse
I'm here on my watch!
I have to re-install adb?
STAGE 7 OU 8
it is not in fastboot reboot the watch and try again
winni21 said:
on which stage it has stopped? Reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
Click to expand...
Click to collapse
the watch is not recognized usb/pc
bartnissa said:
the watch is not recognized usb/pc
Click to expand...
Click to collapse
the execution waiting for the watch but it is not recognized
winni21 said:
it is not in fastboot reboot the watch and try again
Click to expand...
Click to collapse
if I restart the monr here is triangleleurs:leurs:
Hope someone can help me.
My Redmi Note 5 is stucked n Mi-Recovery 3.0 screen with 3 options: Reboot - Wipe data - Connect with MiAssistant. and continue to go in loop until the battery will be zero.
I was try everything to get connected, and flash again the firmware but no result, first and I think main problem is that my PC cannot see the phone, then with all SW I'm sure I can try to re-install everything and recover back my phone. Data is not a problem since I have all backup in MI account and Google account. I hope some one expert can help me to solve this unpleasant situation.
Is already out of warranty and send to MI service cost 36 EURO just for checking and then more than 90 EURO for repairing, is not worthing the cost.
P.S. I downloaded and try with ADB; Flash; MI Tool, USB debug etc..
I'm desperate mother of two kids and I need this phone, now I'm using a very old one.
Thank you
You try mi flash tool, but the phone can not recognized? Fastboot mode working? When yes, maybe Windows install the wrong driver. Look in the device manager and install it when it the wrong one manual
Hi Joke, thank you for your interest in my problem.
You can see the screenshot I just made it and I was trying to connect the phone, I installed any diver as possible but the PC is not recognize it.
joke19 said:
You try mi flash tool, but the phone can not recognized? Fastboot mode working? When yes, maybe Windows install the wrong driver. Look in the device manager and install it when it the wrong one manual
Click to expand...
Click to collapse
matsalleh said:
Hi Joke, thank you for your interest in my problem.
You can see the screenshot I just made it and I was trying to connect the phone, I installed any diver as possible but the PC is not recognize it.
Click to expand...
Click to collapse
And what's with the windows device manager? U look inside
I have an update, now I can flash the Rom using Xiaomi MI tool V2. Then after finish message say that installation was successfully, but when I restart the phone is going back again on same position with Mi-Recovery 3.0. I noted that if I use MI Phone Assistant in certain conditions I can see the phone as "HD" in my PC. There is anything I can do to revive my phone?
I hope someone can help me. Thanks