My Amazfit Pace´s screen dont respond at all. Nothing. But the watch still works as a watch. I had flash the watch with the last firmware from Paceficator Project but it still dont respond. So all I want is to remove the QR Code and use the Watch as a Watch. The problem is that when I try to pair my watch with my Phone the next step is to respond if I´ll use the watch in the left or right arm. But the touch screen dont work, so I´m stucked with this QRCode.
You need to pair in order to get the correct time on watch. I suggest that you use a "remote control" app while watch is connected to the computer so you can send remote "taps" to the watch (of course, it can be done via adb commands as well).
crforti1972 said:
My Amazfit Pace´s screen dont respond at all. Nothing. But the watch still works as a watch. I had flash the watch with the last firmware from Paceficator Project but it still dont respond. So all I want is to remove the QR Code and use the Watch as a Watch. The problem is that when I try to pair my watch with my Phone the next step is to respond if I´ll use the watch in the left or right arm. But the touch screen dont work, so I´m stucked with this QRCode.
Click to expand...
Click to collapse
Are you sure you flashed a Pace firmware? Or a Stratos firmware?
If touchscreen isn't working, you probably did the second one.
Check this thread and let us know if it is your case: https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
Correct Pace Firmware
Saratoga79 said:
Are you sure you flashed a Pace firmware? Or a Stratos firmware?
If touchscreen isn't working, you probably did the second one.
Check this thread and let us know if it is your case: https://forum.xda-developers.com/smartwatch/amazfit/guide-restore-null-sn-locked-t3775998
Click to expand...
Click to collapse
My watch was not working the touch before I flash the Pace firmware. I thought that the problem was the original old firmware. But even though I flash the correct firmware nothing works. I flashed two times.
remote dont work
lfom said:
You need to pair in order to get the correct time on watch. I suggest that you use a "remote control" app while watch is connected to the computer so you can send remote "taps" to the watch (of course, it can be done via adb commands as well).
Click to expand...
Click to collapse
I've tried a remote but don't work. I mean that the app works but don't connect to my Pace.
I don't know why. But maybe there is another version. Can you share the app page?
crforti1972 said:
I've tried a remote but don't work. I mean that the app works but don't connect to my Pace.
I don't know why. But maybe there is another version. Can you share the app page?
Click to expand...
Click to collapse
This is the one I use (requires Java and adb installed properly to work, check README):
https://github.com/MajeurAndroid/Adb-Remote-Screen
lfom said:
This is the one I use (requires Java and adb installed properly to work, check README):
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
Was exactly this one that I've tried. I follow the readme file instructions. It open but don't connect to my watch.
If you don't follow the correct instructions its don't even open. Just return an error. I've installed the last version of Java and run it on a console window. It open but don't connect to my watch.
Other apps such as the flash install app, connect fine to the watch.
crforti1972 said:
Was exactly this one that I've tried. I follow the readme file instructions. It open but don't connect to my watch.
If you don't follow the correct instructions its don't even open. Just return an error. I've installed the last version of Java and run it on a console window. It open but don't connect to my watch.
Other apps such as the flash install app, connect fine to the watch.
Click to expand...
Click to collapse
Do you have adb installed properly? Can you see the watch when you run "adb devices"? If yes, try to edit the file "local.properties" to point to the correct location of adb, or better yet, put the adb dir in the PATH environment variable.
lfom said:
Do you have adb installed properly? Can you see the watch when you run "adb devices"? If yes, try to edit the file "local.properties" to point to the correct location of adb, or better yet, put the adb dir in the PATH environment variable.
Click to expand...
Click to collapse
I believe that is correct. I install the adb in the root of my computer (c:\adb) and include it in the Path of the computer.
When I flashed my watch the adb comands found my watch. And when I run "adb devices" (from any directory/folder) it returns "daemon started successfully", "List of the devices attached" and "232b0f17 device". So I believe that my adb is working properly.
Related
Hello guys. I have been using ADW Launcher for a long time. After I rooted my Android, I uninstalled the stock launcher cause I thought it was useless... I have been trying to find a way to install a custom ROM on my Android, and found a site where it said before I start, I should do a Factory Reset. I forgot that the FR would delete my ADW Launcher, I did it.
Now, whenever I boot my phone, I am stuck on a black screen instead of my ADW Launcher!
I can't buy a new phone at the moment, so I desperately need your help! I know it was stupid, but please, dont' judge... ;u ;
This is the phone I have: sonymobile.com/gb/products/phones/xperia-mini-pro/
Please help.
reflash your phone mr.brilliant
Flash your phone with flashtool.
Go to search box for more info
Sent from my SK17i using Tapatalk 2
I am on a Mac, and I am not very good with this whole flash blah blah. Can you help me step by step? I have access to a PC, but my parents don't let me use it... that is why I prefer doing it on a Mac. If there is absolutely no way to do it on a Mac, I will look for the PC for help. But can you get me a better understanding, along with links etc? I don't like doing things on my own... that is the main reason my phone derped!
Thanks!
Download Sony bridge for MAC and do a repair of your phone that way.
ehnvis said:
Download Sony bridge for MAC and do a repair of your phone that way.
Click to expand...
Click to collapse
Yep.
Sent from my X8 using Tapatalk 2
coolbuy said:
reflash your phone mr.brilliant
Click to expand...
Click to collapse
LOL
coolbuy said:
reflash your phone mr.brilliant
Click to expand...
Click to collapse
:laugh:
OMG !! I can't stop laughing !!! Nice one!!:good:
yes... reflashing will work...
I am trying to connect it to my Mac, but nothing is happening. I enable USB debugging, messed around in the connectivity etc... nothing works!
Come on , the working solution is just simple , flash your phone with flashtool , you on mac , so simple you can go to your friends pc or even on an internet cafe ,, i am sure they dont have mac , and download flashtool and flash your phone
Sparksys said:
Come on , the working solution is just simple , flash your phone with flashtool , you on mac , so simple you can go to your friends pc or even on an internet cafe ,, i am sure they dont have mac , and download flashtool and flash your phone
Click to expand...
Click to collapse
First I need my phone to be able to connect... It's not connecting!
How can I connect? Nothing is working!
AchillesAOT said:
How can I connect? Nothing is working!
Click to expand...
Click to collapse
Go to a windows pc and do it like here in number 2. You can flash it with flashtool, so connect it to pc while holding volume up! That's it!
Or another one: Did you install cwm? Then you could download the 4.0.A.0.69 zip from here. Then you just go to recovery and click mounts/storage and mount your usb storage. You push the zip to your phone and flash the .zip. Then you are on 4.0.A.0.69, but only do this if you were on Gingerbread before, if you were on ics, just flash your phone with flashtool. Go to a windows pc and flash it
If your pc recognizes phone again you could install cwm with that tool. But better flash the ftf!
What do you mean by "my phone doesn't connect"? Does it charge whn you plug usb? Do the leds light up?
If you really do not have access to a pc there are two other solutions:
Install windows on your mac using bootcamp http://www.apple.com/support/bootcamp/
or
Create a vritual machine using virtual box
Enjoy
P.S
Next time you walk into an electronics store take a moment for yourself, breathe calmly, look at all the offers around you and ponder "wouldn't any of these machines that have 3times the power at 1/3 the price of a macbook a far wiser choice?" This should keep you from repeating foolish mistakes. Your parents are very wise at not letting you near a pc.
Rudjgaard said:
What do you mean by "my phone doesn't connect"? Does it charge whn you plug usb? Do the leds light up?
If you really do not have access to a pc there are two other solutions:
Install windows on your mac using bootcamp http://www.apple.com/support/bootcamp/
or
Create a vritual machine using virtual box
Enjoy
P.S
Next time you walk into an electronics store take a moment for yourself, breathe calmly, look at all the offers around you and ponder "wouldn't any of these machines that have 3times the power at 1/3 the price of a macbook a far wiser choice?" This should keep you from repeating foolish mistakes. Your parents are very wise at not letting you near a pc.
Click to expand...
Click to collapse
I already have bootcamp. But, I am trying my hardest to work on a Mac, since I know what to do. And yes, the LED lights, but it doesn't connect!
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Rudjgaard said:
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Click to expand...
Click to collapse
I do have Windows setup.
When I say it doesn't connect, I mean that the LED goes on, it starts charging, but I can't access my SD card, nor can I access the Sony Bridge Mac... So I can't do anything with the phone!
Also, a new problem arose. I can't click home. When I click the home button nothing hgappens!
Do you already have sdk tools installed on you mac?
If not
- go here http://developer.android.com/sdk/index.html, donwload mac version
- go into /platform tools/ and execute the android file
- in /platform tools/ open cmd window and execute "chmod +x fastboot-mac"
- execute "./adb devices", it should give a response if device is connected properly
-If all the above works then all you need to do is get any launcher.apk, place it in the /platform tools and execute "./adb push launcher.apk /system/app"
-If phone doesn't get recognized by the mac some people reported a problem with easy thether, so in terminal type sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext and check if that solves the issue
This is how to manuall install an app from host. Hope it helps.
Btw, do you have cwm recovery installed? Also does the phone reboot constantly or when you get to final loading it just start giving a constant fc message from home?
Which home button started working? on the phone? Of course it does nothing, if you deleted the home app....
As long as connection works and leds light up phone isn't dead
Rudjgaard said:
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Click to expand...
Click to collapse
Alright I am on PC. How do I flash?
Well your only problem was the missing home.apk right? You don't need to reflash the whole firmware if you don't want to...here are the two options anyway:
Requisites: adb drivers. Make sure you have the adb drivers for the phone, if not http://forum.xda-developers.com/showthread.php?t=1623199
Method 1)
-Download flashtool
-Download your phone's stock firmware http://forum.xda-developers.com/showthread.php?t=1568792
-Place ftf file in the programs firmware folder
-Start flashtools, select flash icon, point to the ftf file you downloaded earlier (after selecting flash mode)
-holder volume down button and connect usb (with phone powered off) when flashtools prompts you to
-Wait for installation. Done
Method 2)
-Download sdk tools (as said above)
-Download/extract from any rom or market a launcher.apk
-Put apk into platfrom-tools folder
-Opend a cmd window and navigate to your platform-tools folder
- Type adb device to make sure device is connected and recognized (this time it can be turned on and plugged in)
- type "adb remount"
- type adb push (or install) launcher.apk /system/app/
- reboot
Done
Hi guys,
Here I have Amazfit Bip wich I cant connect to phone because when it asks to confirm pairing I cannot click on YES on the screen.
Any idea what should I have to do?
Thank you!
Hello, today I had the same problem. After installing some firmwares the screen doe not recognize any touch.
I think it is a fault happening while installing the firmware.
First i went back to the original chinese rom and the upgraded to the actual via ADB.
Aft that, everyting is fine again.
By the way. Are you too have the problem with lagging stepcount?
skylow said:
Hello, today I had the same problem. After installing some firmwares the screen doe not recognize any touch.
I think it is a fault happening while installing the firmware.
First i went back to the original chinese rom and the upgraded to the actual via ADB.
Aft that, everyting is fine again.
By the way. Are you too have the problem with lagging stepcount?
Click to expand...
Click to collapse
Hi mate,
Yes I had issue with stepcount.
But can you tell me how could I repair the watch as I cant pair it with the smartphone?
Thanks!
masterross said:
Hi mate,
Yes I had issue with stepcount.
But can you tell me how could I repair the watch as I cant pair it with the smartphone?
Thanks!
Click to expand...
Click to collapse
In my case i flashed "huangeheUS-1.3.3a-installer". Then deleted all the installation trash.
I did a full wipe:
adb shell reboot bootloader
fastboot erase data
fastboot erase cache
fastboot reboot
After that the screen was working again but the watch was in Chinese language.
So i flashed "Stratos_Stock_US_Firmware_2.3.5.0". Now everything is working and in English language.
Thx, but your watch is AmazFit PACE and mine is AmazFit BIP wich doesnt have usb interface unfortunately
masterross said:
Thx, but your watch is AmazFit PACE and mine is AmazFit BIP wich doesnt have usb interface unfortunately
Click to expand...
Click to collapse
Oh, i thought that the Bip has the same interface. Sorry.
Guys,
I opened the watch and cant see anything wrong.
I de-attach and attach battery, clean everything but still touch not works.
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
xxxanmol said:
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
Click to expand...
Click to collapse
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
i solved it finally
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
xxxanmol said:
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
same in here... Amazfit Verge
When I run the command .. it doesn't start in fastboot
kyawzinooygn said:
same in here... Amazfit Verge
Click to expand...
Click to collapse
When I run the command adb shell reboot bootloader, it doesn't start in fastboot. How they solved it?
Can some one help me. I have used "All in one tool" and uninstalled some apks.. Seems they are important apps. Watch is now struck in boot loop that comes after amazfit A symbol. Using the all in one tool, I can again go to this fastboot mode as shown in screenshot. Not sure how to reinstall the uninstalled apks. I am not tech savvy. Can some one help me step by step
xxxanmol said:
i solved it finally
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
Can you help me with boot loop. Uninstalled some apks with the all in one tool (seems some important apks) and the amazfit verge is struck in boot loop as shown in image.
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you
Hi , so i bought a Stratos 3 China version (A1928) and was on 4.0.19.5 version and did a trial run with it and the gps was working well. However, after updating to 4.2.6.0 and flashing it with the stock US rom , the searching of GPS was prompt with the error " No gps signal detected , please try again outdoors" . After searching the forum , i tried downgrading to 4.2.5.0 and it still doesn't seems to work. Any solution to work around it ?
Gps problem 4.2.7.0
I have the same GPS problem out I am in 4.2.7.0 and the data is random. I did your running and hiking.
I am a little disgusted by the oit saying given GPS at the top with the Stratos 3 and there disaster
The last time I had GPS localisation failure I've reboot the watch a all was working well after that. But I stay in 4.2.5.0 ftm
winni21 said:
The last time I had GPS localisation failure I've reboot the watch a all was working well after that. But I stay in 4.2.5.0 ftm
Click to expand...
Click to collapse
I reset the watch and it remains in 4.2.7.0, how to put in 4.2.5.0 and necessarily forgot the warranty, my stratos is 2 weeks old
bartnissa said:
I reset the watch and it remains in 4.2.7.0, how to put in 4.2.5.0 and necessarily forgot the warranty, my stratos is 2 weeks old
Click to expand...
Click to collapse
You need to unlock bootloader first then use this thread:
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
(Check previous version section) don't forget to factory reset the watch after flashing the fw.
winni21 said:
You need to unlock bootloader first then use this thread:
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
(Check previous version section) don't forget to factory reset the watch after flashing the fw.
Click to expand...
Click to collapse
winni 21 if I understood correctly I downloaded Install, that is to say this firmware 'Stratos3_Stock_US_4.2.5.0_Firmware.zip'
and I run with the watch connected to the pc and let it be ?
my model is the A1929 US
bartnissa said:
winni 21 if I understood correctly I downloaded Install, that is to say this firmware 'Stratos3_Stock_US_4.2.5.0_Firmware.zip'
and I run with the watch connected to the pc and let it be ?
my model is the A1929 US
Click to expand...
Click to collapse
If you have your bootloader unlocked yes that's it.
When it's done don't forget to factory reset the watch
winni21 said:
If you have your bootloader unlocked yes that's it.
When it's done don't forget to factory reset the watch
Click to expand...
Click to collapse
I don't know if it's a bootloader and I'm afraid of blocking my watch.
I do not see a simple tutorial for beginners how to install etc ...
thank you
bartnissa said:
I don't know if it's a bootloader and I'm afraid of blocking my watch.
I do not see a simple tutorial for beginners how to install etc ...
thank you
Click to expand...
Click to collapse
here is what I did, install adb setup and then as on the cmd adb devices image, it's ok that means I have the bootloader ???? :confus:
how to reset my watch connected with the computer or the button on the watch to disconnect to the computer.
if I reset the factory settings, it will come back to 4.2.7.0 ?
thanks
bartnissa said:
here is what I did, install adb setup and then as on the cmd adb devices image, it's ok that means I have the bootloader ???? :confus:
how to reset my watch connected with the computer or the button on the watch to disconnect to the computer.
if I reset the factory settings, it will come back to 4.2.7.0 ?
thanks
Click to expand...
Click to collapse
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
winni21 said:
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
Click to expand...
Click to collapse
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do?
winni21 said:
use this thread to unlock bootloader:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
then you'll be able to flash 4.2.5.0 FW. if you factory reset the watch after you'll be still in 4.2.5.0 (do it from the menu off the watch or when it's booted and connected to the computer: adb reboot wipe)
Click to expand...
Click to collapse
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
bartnissa said:
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
Click to expand...
Click to collapse
ok so unzip Stratos3_Stock_US_4.2.5.0_Firmware.zip then run flash_US.bat wait process to be done.
once watch is rebooted wipe it
bartnissa said:
sorry winni21, then the fastboot a priori was made image attached. the watch has restarted and I am still in 4.2.7.0 is that normal?
now to put the rom, how do I do? unlocked yes
what is the simple procedure once download please
Stratos3_Stock_US_4.2.5.0_Firmware
Click to expand...
Click to collapse
watch hangs on screen no command with triangle exclamation mark.
I am disgusted
on which stage it has stopped? reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
winni21 said:
on which stage it has stopped? reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
Click to expand...
Click to collapse
I'm here on my watch!
I have to re-install adb?
STAGE 7 OU 8
it is not in fastboot reboot the watch and try again
winni21 said:
on which stage it has stopped? Reboot your computer and whatch then launch only the flash_us.bat (you can not have 2 adp session at the same time)
Click to expand...
Click to collapse
the watch is not recognized usb/pc
bartnissa said:
the watch is not recognized usb/pc
Click to expand...
Click to collapse
the execution waiting for the watch but it is not recognized
winni21 said:
it is not in fastboot reboot the watch and try again
Click to expand...
Click to collapse
if I restart the monr here is triangleleurs:leurs:
I am not responsible for bricked devices, dead SD cards, etc!
I have not tested the global unlock, Global version unlock thread.
Make sure you make backups before unlocking the bootloader, as this operation will wipe all user data and apps.
Make sure your system version is the official and latest one.
Requirements
- 60% charge on the phone
- PC and usb data cable
- Installed fastboot and proper drivers on your PC
1. Install Deep Testing Apk attached in this post.
2. Click on the Apply Now button in order to get approval for bootloader unlock.
3. Check the status after apply using the Query Approval Status.
4. If you get an error, force stop the application, change your device language to Chinese and try again (if someone can post screenshot of what to tap, I would update this post)
5. Once the approval is done, tap Start Testing button, this will reboot your device in the bootloader.
6. Last chance, make backups at this point otherwise your data is gone.
7. Run command
Code:
fastboot flashing unlock
8. Done, you can now reboot into system normally
If I missed anything, kindly comment and I'll update OP.
myogui said:
I am not responsible for bricked devices, dead SD cards, etc!
Make sure you make backups before unlocking the bootloader, as this operation will wipe all user data and apps.
1. Install Deep Testing Apk attached in this post.
2. Click on the Apply Now button in order to get approval for bootloader unlock.
3. Check the status after apply using the Query Approval Status.
4. If you get an error, force stop the application, change your device language to Chinese and try again (if someone can post screenshot of what to tap, I would update this post)
5. Once the approval is done, tap Start Testing button, this will reboot your device in the bootloader.
6. Last chance, make backups at this point otherwise your data is gone.
7. Run command
Code:
fastboot flashing unlock
8. Done, you can now reboot into system normally
If I missed anything, kindly comment and I'll update OP.
Click to expand...
Click to collapse
Hi myogui
Do you have the firmware for RMX3300_11_A.19?
Do I run that command from the phone? When I start deep testing and phone reboots I only have the options to start, power off, recovery, and restart bootloader.
I can't get this to work on A19 firmware no matter what I do. Says not supported on this model even though I have the correct RMX3300 so I am going to upgrade to A20 and see if it works
Nope upgrading to A20 doesn't work either. Always get failed to submit in either english or chinese.
wildlime said:
Nope upgrading to A20 doesn't work either. Always get failed to submit in either english or chinese.
Click to expand...
Click to collapse
It did take a couple of tries to get it to work but still that was done in like 10-15 minutes. You could try to factory reset the phone first but if it's still doesn't work for you you'll be stuck re-installing everything on your phone.
wildlime said:
Nope upgrading to A20 doesn't work either. Always get failed to submit in either english or chinese.
Click to expand...
Click to collapse
Same problem. It work for me trying all Chinese languages (simple and another two). It seems stuck for like 30 minutes, then idk why I've exit and re enter the app and it worked.
i cant get my computer to recogize the phone when in bootloader. Anyone else run into this? i ran the fastboot command with the phone plugged in but its still waiting for a device to connect
Bnblare said:
i cant get my computer to recogize the phone when in bootloader. Anyone else run into this? i ran the fastboot command with the phone plugged in but its still waiting for a device to connect
Click to expand...
Click to collapse
Try another USB cable and make sure you are in the folder where fastboot program is.
Bnblare said:
i cant get my computer to recogize the phone when in bootloader. Anyone else run into this? i ran the fastboot command with the phone plugged in but its still waiting for a device to connect
Click to expand...
Click to collapse
Download the attached file, then install manually the driver, select the android_winusb.inf file.
myogui said:
Try another USB cable and make sure you are in the folder where fastboot program is.
Click to expand...
Click to collapse
hacls said:
Download the attached file, then install manually the driver, select the android_winusb.inf file.
Click to expand...
Click to collapse
Thanks! This is definitely a driver issues.
I have an RMX 3300 Chinese model. Build number is RMX3300_11_A.20. When I run the deeptesting_RMX3300.apk it says "Failed to submit application. This phone model does not support deep testing. "
robert3892 said:
I have an RMX 3300 Chinese model. Build number is RMX3300_11_A.20. When I run the deeptesting_RMX3300.apk it says "Failed to submit application. This phone model does not support deep testing. "
Click to expand...
Click to collapse
I finally managed to get past this point. But when I go to step 7 it says waiting for device. I'm using the same USB cable that works for ADB. Might try another cable tomorrow and/or another usb port.
Tried different cables and usb ports. Still stuck on 'waiting for device'
robert3892 said:
I finally managed to get past this point. But when I go to step 7 it says waiting for device. I'm using the same USB cable that works for ADB. Might try another cable tomorrow and/or another usb port.
Click to expand...
Click to collapse
Is a secret how you managed that?
criszz said:
Is a secret how you managed that?
Click to expand...
Click to collapse
I believe that the servers which grant permission for the deep testing app are busy at different times of the day. I simply retried the app during different times of the day until it worked. I still am working on a complete solution
robert3892 said:
Tried different cables and usb ports. Still stuck on 'waiting for device'
Click to expand...
Click to collapse
Fixed this issue finally by installing the android bootloader usb drivers
OK I have this working. I believe I will now need to relock the bootloader
robert3892 said:
OK I have this working. I believe I will now need to relock the bootloader
Click to expand...
Click to collapse
Don't relock the bootloader using the ADB lock command. This will brick your device!
Everithing ok, thanks man.