I have sharp z2 and i search any root method and install TWRP but i cant find it..please help.i want root my device
gonfirman said:
I have sharp z2 and i search any root method and install TWRP but i cant find it..please help.i want root my device
Click to expand...
Click to collapse
Eu também procuro como realizar esse método. Você já conseguiu?
sharp z2 root
tuba11 said:
Eu também procuro como realizar esse método. Você já conseguiu?
Click to expand...
Click to collapse
and I have the same problem I have and I want help
Hey, Did you you got the device firmware?
If yes, I can do a port for you
Peak.Krittin said:
Hey, Did you you got the device firmware?
If yes, I can do a port for you
Click to expand...
Click to collapse
not how do I do that?
Peak.Krittin said:
Hey, Did you you got the device firmware?
If yes, I can do a port for you
Click to expand...
Click to collapse
I use original firmware,
gonfirman said:
I use original firmware,
Click to expand...
Click to collapse
yes i have original
Sharp z2 twrp
gonfirman said:
I have sharp z2 and i search any root method and install TWRP but i cant find it..please help.i want root my device
Click to expand...
Click to collapse
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:29 PM ---------- Previous post was at 03:52 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gonfirman said:
I have sharp z2 and i search any root method and install TWRP but i cant find it..please help.i want root my device
Click to expand...
Click to collapse
install TWRP
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
HTML:
adb devices
adb reboot-bootloader
fastboot devices
fastboot oem unlock – Press on the device the " Vol+" button
fastboot flash recovery recovery.img
fastboot boot recovery.img
Now disconnect your device from your computer. If you want to turn off the device press and hold on the device the Power button to fade out the screen. Press and hold on the device the Power button, and «Vol +» button until the phone vibrates and appearance of the logo «powered by Android» Format data in TWRP. Install ROM
with SuperSu
HTML:
https://www.needrom.com/download/sharp-z2/
with Magisk
HTML:
https://www.needrom.com/download/sharp-z2-with-magisk/
Hello my friend, I did all of these but the phone does not start hanging on the SHARP logo
Okay I did, I followed step by step the instructions here https://www.needrom.com/download/twrp-for-sharp-z2/
Hi.
Device power off?
Now disconnect your device from your computer. If you want to turn off the device press and hold on the device the Power button to fade out the screen. (20 seconds)
Turn on.
You used my TWRP? I have everything working
No wipe data – format data! MD5 norm?
Try with the removed assert in the update-script
drive.google.com/file/d/1Og2hzv3bSZSZh5lstFAMDAdMSXA06FzN/view
Download custom ROM zip by card – reader!
Okay I did, I followed step by step the instructions here https://www.needrom.com/download/twrp-for-sharp-z2/
thanks my friend
xlappas said:
Okay I did, I followed step by step the instructions here https://www.needrom.com/download/twrp-for-sharp-z2/
thanks my friend
Click to expand...
Click to collapse
Best regards ?
Hi people,I have installed this firmware,I got random reboots from time to time,anyone has the same problem?
Congratulations
taras-fedora-syn said:
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:29 PM ---------- Previous post was at 03:52 PM ----------
Click to expand...
Click to collapse
Excellent work! Is there something for Sharp Z3 FS8009?
Excelente trabajo! Hay algo para Sharp Z3 FS8009?
joranto said:
Excellent work! Is there something for Sharp Z3 FS8009?
Excelente trabajo! Hay algo para Sharp Z3 FS8009?
Click to expand...
Click to collapse
No
taras-fedora-syn said:
install TWRP
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
HTML:
adb devices
adb reboot-bootloader
fastboot devices
fastboot oem unlock – Press on the device the " Vol+" button
fastboot flash recovery recovery.img
fastboot boot recovery.img
Now disconnect your device from your computer. If you want to turn off the device press and hold on the device the Power button to fade out the screen. Press and hold on the device the Power button, and «Vol +» button until the phone vibrates and appearance of the logo «powered by Android» Format data in TWRP. Install ROM
with SuperSu
HTML:
https://www.needrom.com/download/sharp-z2/
with Magisk
HTML:
https://www.needrom.com/download/sharp-z2-with-magisk/
Click to expand...
Click to collapse
Hi Taras, how to remove or decrypt the phone? It asking a password to decrypt
Zecca said:
Hi Taras, how to remove or decrypt the phone? It asking a password to decrypt
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=iuZRIosC1eo
1 min 28 sec CANCEL!
taras-fedora-syn said:
https://www.youtube.com/watch?v=iuZRIosC1eo
1 min 28 sec CANCEL!
Click to expand...
Click to collapse
Hi, @taras-fedora-syn
Thank you very much for help. Both your ROM and your recovery port, is very awesome!!
My phone not hot anymore. And free of lag. Your tutorial is good enough for me to understand step by step.
Just needed to read it twice to make sure everything ok. I'm pressing cancel and format all. Hahaha.
I don't care to lose data as long as i got root. Usually my phone always warm, then suddenly become hot. But now it's solve by this rom.
Anyone can port custom rom from Redmi Note 4MTK or LeEco Le2 X620 (EUI/MIUI/Flyme/lineage/CrDroid/RR) MM or Nougat to Z2?
Both phones has same chipset Helio X20 as Z2.
Related
Hi. Today i've made a patched bootloader for this LG Leon model. That means you can install a custom recovery and rom!
How to:
1. You must have an Android 5 installed with root permissions (you can get them with kingroot).
2.1. Download the patched bootloader (aboot) file: https://yadi.sk/d/tpz-nnVcz2Qk2 and place it at /sdcard
2.2 If you want to install a TRWP recovery, you can get it here: https://twrp.me/devices/lgleonlte.html
Rename it to recovery.img and copy to /sdcard
3.1 Enter the Android terminal emulator or "adb shell" and write:
Code:
su
dd if=/sdcard/aboot.bin of=/dev/block/bootdevice/by-name/aboot
dd if=/sdcard/recovery.img of=/dev/block/bootdevice/by-name/recovery
5. PROFIT!
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What model of LG Leon ?
it work on my lg h340n, i have problem with path "if=/sdcard/", but i change it to "if=/storage/emulated/0/" and all worked fine
is there any custom rom compatibile with 340h?
cooina said:
is there any custom rom compatibile with 340h?
Click to expand...
Click to collapse
Yes, you can install cyanogenmod for ms345
cerg2010cerg2010 said:
Yes, you can install cyanogenmod for ms345
Click to expand...
Click to collapse
Xenon HD will also work?
I have a h340n with MM, if i downgrade to lillipop and root it will the update to mm remove the root?
Thanks
Dr.Speed said:
I have a h340n with MM, if i downgrade to lillipop and root it will the update to mm remove the root?
Thanks
Click to expand...
Click to collapse
you cant update if u have root/xposed/twrp active, u have to remove them so u can update!
---------- Post added at 01:43 PM ---------- Previous post was at 01:19 PM ----------
i tested 5.1.1 cyanogenmod on v10e and didnt work the flash was correct but i think it had erros ! possible problems bootloader locked in 5.0.1 and also v10e supposed to v10b! i havent tried xenonhd rom !
I tested XenonHD and it is working. The only incovenience is that install procedure requires a special version of TWRP to get installed.
Hey bro, do you think that this twpr you Linked here Will work on LG Leon H340F?
which one , can u link ?
LuciIT said:
I tested XenonHD and it is working. The oly incovenience is that install procedure requires a special version of TWRP to get installed.
Click to expand...
Click to collapse
which twrp, can u please link ?
Xenzo33 said:
which twrp, can u please link ?
Click to expand...
Click to collapse
I used this version of TWRP: https://www.androidfilehost.com/?fid=24052804347772357
Happy flashing
LuciIT said:
I tested XenonHD and it is working. The oly incovenience is that install procedure requires a special version of TWRP to get installed.
Click to expand...
Click to collapse
LuciIT said:
I used this version of TWRP: https://www.androidfilehost.com/?fid=24052804347772357
Happy flashing
Click to expand...
Click to collapse
have u tried cyanogenmod ? :3 thanks for twrp mate!
Xenzo33 said:
have u tried cyanogenmod ? :3 thanks for twrp mate!
Click to expand...
Click to collapse
Yes, but it is buggy. Battery is not showing actual percentage and because of that phone can shut down at 80% battery for example. Despite baseband is shown as unknown, Call and data works (only on 3g, 4g doesn't work), sms I didn't tried. Camera like on xenon hd crash on video recording, but it can be fixed by using third-party camera (I use Hydrogen camera, you can download it from here: http://forum.xda-developers.com/oneplus-one/themes-apps/hydrogen-os-camera-oneplus-1-op2-t3241423 )
LuciIT said:
Yes, but it is buggy. Battery is not showing actual percentage and because of that phone can shut down at 80% battery for example. Despite baseband is shown as unknown, Call and data works (only on 3g, 4g doesn't work), sms I didn't tried. Camera like on xenon hd crash on video recording, but it can be fixed by using third-party camera (I use Hydrogen camera, you can download it from here: http://forum.xda-developers.com/oneplus-one/themes-apps/hydrogen-os-camera-oneplus-1-op2-t3241423 )
Click to expand...
Click to collapse
this one ? http://androidforums.com/threads/5-...on-t-mobile-and-walmart-family-mobile.983522/
mic or speaker not working on call any fix ?
I got the same problem, mic or speaker does not work, only on phone calls!!
Work in H340AR
Funciona es este modelo, lo mejor es hacerlo desde la PC con adb shell
problem
Leo1590 said:
Funciona es este modelo, lo mejor es hacerlo desde la PC con adb shell
Click to expand...
Click to collapse
problem no flash No souch and directory i copy phone sdcard abootbin
It took me 2 weeks of contemplating the ethics of posting this info.
But if you search hard enough you'll find many different ways to accomplish this same task, so here it is.
While the methods I found are just workarounds, this way will disable frp all together.
Thanks to @Sh$llNinjA for sharing a engroot boot image.
An engineers boot image with an active root shell interface.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fire up oden and load the boot into the AP section and flash.
Leave the phone hooked to the pc and after it boots up you can connect with adb
To make sure the pc can communicate with the phone start with
Code:
adb devices
.
If you can see the phone then you can follow up with
Code:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p16
And that's it!!
Reboot and check it out.
Dosent work
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
Help i cant do it
DanZeFan said:
Dosent work
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
Help i cant do it
Click to expand...
Click to collapse
Where are you having the issue?
DanZeFan said:
Dosent work
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
Help i cant do it
Click to expand...
Click to collapse
I can Help out If u Free Let Me because after Flash EngRoot put Wifi go on google Verification page and after Write Cmd
DamienMc said:
Fire up oden and load the boot into the AP section and flash.
Leave the phone hooked to the pc and after it boots up you can connect with adb
Click to expand...
Click to collapse
Something went wrong on your Pixel Experience Rom, so I tried flashing the stock deodexed rom you made (from Pixperience with FlashFire with wipe), and had the same problem as @EzzBMTH. I then flashed the boot successfully thru Odin. It left download mode and I am now greeted with a nice black screen. I can't turn it on by pressing and holding power. Can you help?
Hmm, I'll investigate this farther this weekend... In the mean time you should be able to hold -vol and power to get into download mode and flash back to stock with Odin
[EDIT]
Oh wait... Just found the thread and see what your doing.
The eng_root selinux is not permissive, so if your rooted you'll see a black screen, but the adb commands work. After your done you must reflash eng_boot... Guess I need to update the OP
[/EDIT]
DamienMc said:
Hmm, I'll investigate this farther this weekend... In the mean time you should be able to hold -vol and power to get into download mode and flash back to stock with Odin
[EDIT]
Oh wait... Just found the thread and see what your doing.
The eng_root selinux is not permissive, so if your rooted you'll see a black screen, but the adb commands work. After your done you must reflash eng_boot... Guess I need to update the OP
[/EDIT]
Click to expand...
Click to collapse
Reflash the eng_boot that is in the OP? Edit: ran adb commands while the screen was black. then went to download mode and FRP lock was off. Reflashed the boot image in OP, and phone is still black trying to boot. Edit the second: just so you know this (I should have put this in previous edit), I left my black screen phone plugged in all night, and it must have booted halfway overnight because in the morning it was stuck on the AT&T boot logo. I moved it to the download screen but pressed vol down to reboot, but it still was black. Then I decided to come back here and see what you said:
DamienMc said:
...if your rooted you'll see a black screen, but the adb commands work. After your done you must reflash eng_boot...
Click to expand...
Click to collapse
Op has eng_root, you need eng_boot
look here
DamienMc said:
Op has eng_root, you need eng_boot
look here
Click to expand...
Click to collapse
WOW i am really dumb. works perfectly now. thank you
thank you! this worked for me. i just bought a used j3 only to find it was frp locked. and after 2 hours of searching for a proper bypass, i always got stuck at some point. but his worked for me thank you so much for this!
Can you please walk me through the steps of setting up adb on windows 7 PC. Really need to get this FRP lock off my phone. Thanks
Can you make this code in to a root.bat file for me so I can just click on it and inject this code???
https://forum.xda-developers.com/showthread.php?t=2588979
Should do the trick.
I thought about making a script, but what's the point, it's just one command.
And remember, if your rooted, you'll have to reflash back to eng_boot when your done.
DamienMc said:
https://forum.xda-developers.com/showthread.php?t=2588979
Should do the trick.
I thought about making a script, but what's the point, it's just one command.
And remember, if your rooted, you'll have to reflash back to eng_boot when your done.
Click to expand...
Click to collapse
Just going to pay this guy 15 bucks to do it i installed adb but it dont see my phone and its probably because i cant enable usb debugging
@james2ya
Sucks it's not working... Don't think debugging matters with eng_root tho.
If I was you I'd test adb with another device first, if that fails maybe try a different installer
@james2ya
Sucks it's not working... Don't think debugging matters with eng_root tho.
If I was you I'd test adb with another device first, if that fails maybe try a different installer
thank you very much worked perfectly but quick question to update to 7.0 should i flash back to eng.boot instead of root
@nc_blackout
Depends on how you install it...
If you let it update ota you'll need the stock boot.
If you update with Odin it does not matter.
If you root and update with flashfire, it depends on your root method.
Solution
Solo conecten su dispositivo en modo de descarga y flashen este archivo, lo colocan en AP y listo su telefono estara sin FRP
DJ_BLIZZARD said:
Solo conecten su dispositivo en modo de descarga y flashen este archivo, lo colocan en AP y listo su telefono estara sin FRP
Click to expand...
Click to collapse
You are Luke Skywalker.... :good: :laugh:
Thanks....
It Worked! Thanks Alot!!!
DamienMc said:
It took me 2 weeks of contemplating the ethics of posting this info.
But if you search hard enough you'll find many different ways to accomplish this same task, so here it is.
While the methods I found are just workarounds, this way will disable frp all together.
Thanks to @Sh$llNinjA for sharing a engroot boot image.
An engineers boot image with an active root shell interface.
Fire up oden and load the boot into the AP section and flash.
Leave the phone hooked to the pc and after it boots up you can connect with adb
To make sure the pc can communicate with the phone start with
Code:
adb devices
.
If you can see the phone then you can follow up with
Code:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p16
And that's it!!
Reboot and check it out.
Click to expand...
Click to collapse
Followed Instructions and
It Worked! Thanks Alot!!!
Hello, please help me to root Vernee M6. Thank you!
MoeKyawThu991 said:
Hello, please help me to root Vernee M6. Thank you!
Click to expand...
Click to collapse
Hello, I too want recovery and root for the Vernee M6
Orat60 said:
Hello, I too want recovery and root for the Vernee M6
Click to expand...
Click to collapse
I have M6 also. I would buy 1 for somebody who can create us a ASOP ROM with root and recovery!
Hi, developer here, just asked Vernee for kernel source code so i can start developing a custom recovery asap.
Regards.
josalaito said:
Hi, developer here, just asked Vernee for kernel source code so i can start developing a custom recovery asap.
Regards.
Click to expand...
Click to collapse
Awesome josalaito!
Root done! Writing and posting a tutorial ASAP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:38 PM ---------- Previous post was at 05:23 PM ----------
Rooting Vernee M6:
First of all, unlock developer settings by going to Settings - Phone Status and pressing 10 times over Build Number.
Then, in developer settings, turn on OEM Unlocking flag and USB Debugging.
Download this pack.
Open a cmd terminal, drive to the unpacked folder and type the following commands: (IMPORTANT: THIS WILL ERASE ALL YOUR DATA, MAKE A BACKUP FIRST)
adb.exe reboot-bootloader
fastboot.exe oem unlock
After this, reboot and configure the phone, reenable USB Debugging, install Magisk Manager and again type the following commands:
adb.exe reboot-bootloader
fastboot.exe flash boot root_boot.img
Ur phone is now rooted.
josalaito said:
Root done! Writing and posting a tutorial ASAP!
---------- Post added at 05:38 PM ---------- Previous post was at 05:23 PM ----------
Rooting Vernee M6:
First of all, unlock developer settings by going to Settings - Phone Status and pressing 10 times over Build Number.
Then, in developer settings, turn on OEM Unlocking flag and USB Debugging.
Download this pack.
Open a cmd terminal, drive to the unpacked folder and type the following commands: (IMPORTANT: THIS WILL ERASE ALL YOUR DATA, MAKE A BACKUP FIRST)
adb.exe reboot-bootloader
fastboot.exe oem unlock
After this, reboot and configure the phone, reenable USB Debugging, install Magisk Manager and again type the following commands:
adb.exe reboot-bootloader
fastboot.exe flash boot root_boot.img
Ur phone is now rooted.
Click to expand...
Click to collapse
Rar file doesn't open
rodpgfx said:
Rar file doesn't open
Click to expand...
Click to collapse
Try this mate M6.zip
josalaito said:
Try this mate M6.zip
Click to expand...
Click to collapse
That one worked.
rodpgfx said:
That one worked.
Click to expand...
Click to collapse
Perfect, i hope i can bring TWRP asap, to AOSP rom i contacted Vernee to source code but still no answer
I tried every way to try to extract recovery from the firmware.....no way! Doesn't show recovery in partitions
Root
Crackloi said:
Root
Click to expand...
Click to collapse
The phone is already rooted. I wouldn't be able to see the system partition otherwise.....
Guys any luck getting any scatter files for this phone? I sent Vernee multiple messages and not one reply! I need the firmware for this phone so I can fix it. Stuck in bootloop now with not even option for recovery.....
I could work with this device this week and finally build a working TWRP device(Data partition decryption dont work, but i'm working on a kernel which dont encrypt data), you can backup system, boot and much more to a external sd card.
Get it from here: recovery.img
Reboot fastboot mode and perform the following commands:
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
Once on recovery, keep the device blocked for a min or two, and then unlock it, allow system modifications, go to mount, mount system, then click on options, file explorer, go to system folder and delete the recovery-from-boot.p file.
I cannot get my phone to go to fastboot, recovery or anything else. Just keeps boot looping.....
rodpgfx said:
I cannot get my phone to go to fastboot, recovery or anything else. Just keeps boot looping.....
Click to expand...
Click to collapse
Didnt work fully turning it off(Power off + Vol -) and then boot into fastboot pressing Vol + and power off at the same time?
If u make it work i can send you a system backup so you can fix your phone
I done all that. I pressed Vol + and power until it was off then vol- and power, just start boot looping again. I fear the only thing that can save it now is a scatter file...... Even AliExpress didn't help me with warranty still left, and why I will not buy from them again.
rodpgfx said:
I done all that. I pressed Vol + and power until it was off then vol- and power, just start boot looping again. I fear the only thing that can save it now is a scatter file...... Even AliExpress didn't help me with warranty still left, and why I will not buy from them again.
Click to expand...
Click to collapse
I can scatter all my partitions and upload then to you, but got not a nice connection until monday.
That would be nice. Thanks!
As always none of the instructions goes from start to finish as planned.
- install fastboot amd adb https://myphoneupdate.com/install-adb-and-fastboot-on-windows/, YES!
- String "list of devices attached to the windows", yeah I can see it!
- https://myphoneupdate.com/unlock-bootloader-moto-e6-plus/
- Enable Developer Options, YES!
- Enable OEM Unlock Option, YES!
- Power Off Your Phone >> Now Press & Hold Volume Up + Power Button Together Till You See Boot Logo. No I don't see it. I get black screen and there are three options to select in the middle left screen: Select boot mode, recovery, fastboot, normal. I assume that I need to select fastboot? If I do, I get white screen like in the pic. And there I'm stuck. What I should do next? https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7
No_sense_at_all said:
As always none of the instructions goes from start to finish as planned.
- install fastboot amd adb https://myphoneupdate.com/install-adb-and-fastboot-on-windows/, YES!
- String "list of devices attached to the windows", yeah I can see it!
- https://myphoneupdate.com/unlock-bootloader-moto-e6-plus/
- Enable Developer Options, YES!
- Enable OEM Unlock Option, YES!
- Power Off Your Phone >> Now Press & Hold Volume Up + Power Button Together Till You See Boot Logo. No I don't see it. I get black screen and there are three options to select in the middle left screen: Select boot mode, recovery, fastboot, normal. I assume that I need to select fastboot? If I do, I get white screen like in the pic. And there I'm stuck. What I should do next? https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7
Click to expand...
Click to collapse
What are you trying to do?
Sent from my Moto E (4) using Tapatalk
---------- Post added at 06:20 AM ---------- Previous post was at 06:16 AM ----------
What does getvar all say?
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
No_sense_at_all said:
As always none of the instructions goes from start to finish as planned.
- install fastboot amd adb https://myphoneupdate.com/install-adb-and-fastboot-on-windows/, YES!
- String "list of devices attached to the windows", yeah I can see it!
- https://myphoneupdate.com/unlock-bootloader-moto-e6-plus/
- Enable Developer Options, YES!
- Enable OEM Unlock Option, YES!
- Power Off Your Phone >> Now Press & Hold Volume Up + Power Button Together Till You See Boot Logo. No I don't see it. I get black screen and there are three options to select in the middle left screen: Select boot mode, recovery, fastboot, normal. I assume that I need to select fastboot? If I do, I get white screen like in the pic. And there I'm stuck. What I should do next? https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7
Click to expand...
Click to collapse
Are you trying to root the moto e6 plus?
Fastoh said:
Are you trying to root the moto e6 plus?
Click to expand...
Click to collapse
Yes
No_sense_at_all said:
Yes
Click to expand...
Click to collapse
I made a guide on how to root, I leave you the link xd
https://forum.xda-developers.com/moto-e6-plus/how-to/guide-how-to-root-moto-e6-plus-pokerp-t4181383
Unlocking bootloader: https://www.getdroidtips.com/unlock-bootloader-moto-e6-plus/
When I command "adb reboot bootloader" it doesnt open like this https://www.getdroidtips.com/wp-content/uploads/2020/02/bootloader-mode.jpg I get this white screen like this https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7 .Command "fastboot devices" doesn't work there. So what to do?
No_sense_at_all said:
Unlocking bootloader: https://www.getdroidtips.com/unlock-bootloader-moto-e6-plus/
When I command "adb reboot bootloader" it doesnt open like this https://www.getdroidtips.com/wp-content/uploads/2020/02/bootloader-mode.jpg I get this white screen like this https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7 .Command "fastboot devices" doesn't work there. So what to do?
Click to expand...
Click to collapse
Power off.
Hold power button and volume down button till you see fastboot screen.
Run fastboot devices command
No_sense_at_all said:
I get this white screen like this https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7 .Command "fastboot devices" doesn't work there. So what to do?
Click to expand...
Click to collapse
Looks like the bootloader is corrupt, try
Lmsa's flash rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
No_sense_at_all said:
Unlocking bootloader: https://www.getdroidtips.com/unlock-bootloader-moto-e6-plus/
When I command "adb reboot bootloader" it doesnt open like this https://www.getdroidtips.com/wp-content/uploads/2020/02/bootloader-mode.jpg I get this white screen like this https://u.pcloud.link/publink/show?code=XZaBhzXZbJB6SO8v65hDfVXY36dJWFmGjQm7 .Command "fastboot devices" doesn't work there. So what to do?
Click to expand...
Click to collapse
The guide you are following is not the correct one to unlock the bootloader, on this device you need to first downgrade to firmware version 76 and then unlock.
---------- Post added at 22:41 ---------- Previous post was at 22:40 ----------
And if the pc does not detect the device in fastboot mode, it is probably because you do not have the drivers installed
Fastoh said:
The guide you are following is not the correct one to unlock the bootloader, on this device you need to first downgrade to firmware version 76 and then unlock.
Click to expand...
Click to collapse
Ok, I give up.
Hola, cómo puedo rootear mi celular motoe6plus?
CarolinaGH said:
Hola, cómo puedo rootear mi celular motoe6plus?
Click to expand...
Click to collapse
I have adapted the tutorial to be able to unlock the bootloader (and therefore root it) I wish you luck, and by the way in this forum you should not write in Spanish, do it in English please.
I install version 76.01, and when I put the fastboot command "fastboot flashing unlock_ability_etc...(I don't remember), it says "Unlock ability=0", what to do.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
locoqloquewea said:
I install version 76.01, and when I put the fastboot command "fastboot flashing unlock_ability_etc...(I don't remember), it says "Unlock ability=0", what to do.
View attachment 5397093
Click to expand...
Click to collapse
Veo que hablas español xd. Estás seguro que instalaste la version 76.01? Porque esa versión es la unica que permite el desbloqueo, si instalaste otra por error entonces no te lo permitirá.
============================================
I see you speak Spanish xd. Are you sure you installed version 76.01? Because that version is the only one that allows unlocking, if you installed another by mistake then it will not allow it.
I managed to do my first root with an ASUS Zenfone 2 Laser, and supersu. I'd like to do something like with my Moto e6 plus (not using magisk, nor flashing a rom, but with supersu and the less change possible): it is possible?
Today I managed to unlock (with https://github.com/bkerler/mtkclient) my moto e6 plus. But I don't want to install magisk (at least so far): rather I prefer supersu (less invasive).
Ho w could I do it?
Aquí les dejo como cambiar la ROM ya que me costó mucho conseguirlo, espero que les funcione y feliz año nuevo a todos
Qualcomm Crash Dump Mode After instaled the rom ! Any Solution?
[QUOTE = "iloveyouzappa, publicación: 84439141, miembro: 11433279"]
Qualcomm Crash Dump Mode ¡Después de instalar la rom! ¿Alguna solución?
[/CITAR]
miin the same video you have the telegram channel, write there and I will help you
i got new rom ! its finaly booted but now i have no more IMI and Netword Also FingerPrint ! omg solutions?
here is the link to qcn file Enjoy i have removed my imei from it you can add yours by using this tool : https://mega.nz/file/LixWmY5T#ki4MXHtf0XKNovI7Iz3DQ8o2inrIPc3aTDgrwE_WpcI
QCN : https://mega.nz/file/yypwHQLC#96sIs97z_nkOSyn8U7U-1bRikrk1ipBDt2HFcXb1sLY
use the below guide to restore imei and everything you have lost : https://forum.xda-developers.com/t/guide-backup-edit-and-restore-qcn-fixing-lost-imei.4101611/
i really apreciate mate ! i will try it ! thanks alotttttttttttttttt
I am unable to flash, please help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I turn the phone off, then connect the usb and hold volume up/down but seems to do nothing...
No vibration or notification just black screen. What am I doing wrong?
I am attempting to flash the above rom but unable to do so
kanej2006 said:
I turn the phone off, then connect the usb and hold volume up/down but seems to do nothing...
No vibration or notification just black screen. What am I doing wrong?
I am attempting to flash the above rom but unable to do so
Click to expand...
Click to collapse
Turn off your cellphone, press both up & down volume button ad plug in the USB. Keep pressing the buttons until you see logo screen then you will see a black screen now your phone is in edl mode now connect it with usb and flash
mrgreapes said:
Turn off your cellphone, press both up & down volume button ad plug in the USB. Keep pressing the buttons until you see logo screen then you will see a black screen now your phone is in edl mode now connect it with usb and flash
Click to expand...
Click to collapse
Hi, I seemed to get it working but keep getting issues, please refer to the screenshots, keeps failing...
kanej2006 said:
Hi, I seemed to get it working but keep getting issues, please refer to the screenshots, keeps failing...
View attachment 5252745View attachment 5252747
Click to expand...
Click to collapse
which rom you are trying to install
go to configuration and show me your firehorse configuration
mrgreapes said:
go to configuration and show me your firehorse configuration
Click to expand...
Click to collapse
Thanks for the fast response. I am attempting to flash 237 & after 357 China rom. I already have both files available.
Here are the settings for Firehorse Config:
directly flash 357
mrgreapes said:
directly flash 357
Click to expand...
Click to collapse
I will attempt this once I reach home.
Fingers crossed.
make a backup of your persist drive otherwise some of your sensors might stop working
you have lenovo legion duel or pro?
can you do me a favor? i need backup of persist drive because when i flashed my phone i accidentally damaged my persist drive and now some of my sensor are not working it is safe to make a backup before flashing let me know i will guide you how to backup these files
in order to make backup boot your mobile into edl mode connect your phone
in qfil flat build select all the firehorse and patch.xml then go to tools - partition manager -
you will see a list of drives in your phone
make sure to make a backup of these mentioned drives
boot
persist
modem
recovery
here is the tutorial to make backup
once backup is done then flash your phone
and please do share your persist drive here so i can recover my sensors
i am gonna sleep now thanks in advance
mrgreapes said:
you have lenovo legion duel or pro?
Click to expand...
Click to collapse
Legion Duel
Update. I have tried to flash various roms but each time unnsuccessful and Sahara Server Fail Process message. Any idea?
The current rom, which is version 12.0.073 ST Android 10. Everything is working perfect but it's not reading any simcard. I tried Vodafone & o2, not reading or working at all saying no network. The rom appears to be some Asian/Tamil version. I am in the UK & therefore need a Global or EU rom. Even I don't mind a Chinese rom if it's better in any way.
However, after many failed attempts of flashing any rom, all failed as per the previous screenshots. What am I doing wrong? Is there no other simpler way of flashing a rom? I just need something recent, stable and reads my sim cards.....
Thanks for any support you may have.