I was trying to install a modified ROM in redmi note 3. The rom had a modified emmc_appsboot.mbn and a modded recovery.img. I entered in sp flash tool and was flashing the rom and the app crashed or battery ran out while installing. Now the fastboot and the os were bricked. At this point when I tried to boot the MI logo was showing up for a second and then it reboots. At this point, it was showing up as a fastboot device on my pc so I tried using command fastboot reboot edl and it worked (in the black screen). now in edl mode (red light blinking when plugged in), I tried installing stock rom and again it was interrupted ( due to maybe battery issue). Now when I connect the device to pc it detects as 900e instead of 9008, whenever I press the power button it blinks red light like in edl mode ( this may also happen if the battery has no juice), I cannot charge coz its still in edl mode.
I tried Deep Flash cable, it didn't work. I then manually updated the driver from 900e to 9008, it shows up in mi flash tool but installation fails with the error cannot receive hello package.
After ****ing my device this much I went to a mi service center and they said that when they try to install software, it fails. They dunno why, I guess the battery is not enough to install the software.
Finally, They asked to replace the motherboard. since spending 5k on kenzo in october 2018 is a waste any bright minds have any idea for repair,?
ISH99 said:
I was trying to install a modified ROM in redmi note 3. The rom had a modified emmc_appsboot.mbn and a modded recovery.img. I entered in sp flash tool and was flashing the rom and the app crashed or battery ran out while installing. Now the fastboot and the os were bricked. At this point when I tried to boot the MI logo was showing up for a second and then it reboots. At this point, it was showing up as a fastboot device on my pc so I tried using command fastboot reboot edl and it worked (in the black screen). now in edl mode (red light blinking when plugged in), I tried installing stock rom and again it was interrupted ( due to maybe battery issue). Now when I connect the device to pc it detects as 900e instead of 9008, whenever I press the power button it blinks red light like in edl mode ( this may also happen if the battery has no juice), I cannot charge coz its still in edl mode.
I tried Deep Flash cable, it didn't work. I then manually updated the driver from 900e to 9008, it shows up in mi flash tool but installation fails with the error cannot receive hello package.
After ****ing my device this much I went to a mi service center and they said that when they try to install software, it fails. They dunno why, I guess the battery is not enough to install the software.
Finally, They asked to replace the motherboard. since spending 5k on kenzo in october 2018 is a waste any bright minds have any idea for repair,?
Click to expand...
Click to collapse
Remove the battery . fully charge it and put it back and do ur experiment.
first charge your phone properly and have a look your phone is in which state.
Related
hey everyone, flashed the cwm recovery which i found someware and the source were saying the it meant for all devices. but npw my phone does not go to fastnoot nor to recovery mode.
But, whenever i connect it to pc the the red noti. red light blinks and device name qualcomm 900e shows up in device manager. also waiting for device in adb. is there any way to revive my phone???:crying: :crying:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
GNVM said:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
Click to expand...
Click to collapse
flashtool does not recognize the device.
also in adb there is no device in list?
jobangill99 said:
flashtool does not recognize the device.
also in adb there is no device in list?
Click to expand...
Click to collapse
Try miflash to flash a new rom. If this does not work, then remove the back panel of you phone and disconnect the battery cable. Watch video on youtube for help. After that leave the phone disconnected for 30 mins and then reconnect it. Press vol down and power and you should be able to enter fastboot mode.
If nothing works go for test point method. see videos for better understanding.
As I was trying to flash global rom via miflash, It gave an error at %50 helloblabla and stuck at nowhere. Just red led blinking. When I connect it to the pc, It is seen as diagnostics 900e (com10). I hold volume + and - and plug the usb cable after taking out battery and usb cable for 10 seconds and putting them back from back but It doesn't work. I cannot see my device in miflash to flash the device.
Use the deep flash method mentioned here
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page=1&page=1&mobile=2
Had the same issue on my rn3 and was able to recover it using this method(when test point seemed the only option). You just need a copper wire strand to do this. Short the usb 2nd pin as in the video, then remove cable and reinsert. Phone will be detected as unknown device, then update driver and phone will be shown as qdownloader 9008 mode. Next open miflash and flash rom.
tuxing said:
Use the deep flash method mentioned here
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page=1&page=1&mobile=2
Had the same issue on my rn3 and was able to recover it using this method(when test point seemed the only option). You just need a copper wire strand to do this. Short the usb 2nd pin as in the video, then remove cable and reinsert. Phone will be detected as unknown device, then update driver and phone will be shown as qdownloader 9008 mode. Next open miflash and flash rom.
Click to expand...
Click to collapse
See, the person I bought the phone will do it for me. That's not something I want to do.
Use the modified fastboot to reboot to edl from fastboot. google "fastboot edl"
justinxfan said:
Use the modified fastboot to reboot to edl from fastboot. google "fastboot edl"
Click to expand...
Click to collapse
I wish I could go in fastboot mode Device doesn't turn on at all. It needs deep flashing as I can learn. Will do it soon today.
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Just checking, but did you use the fastboot edl v2 to enter EDL?
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
when i fail to unlock bootloader in official method then i tried miui8 flashboot Rom from mi flash tool with modified emmc_appsboot.mbn file from one of the developer i bricked my Redmi note 3 Qlcmm650
solution:- 1) remove back cover & disconnect the battery around 1 minute reconnect it (recomended one if this not possible for you then try 2nd method)
Or
2)full discharge the battery Then charge it more then 35% (it will also work as diconnecting the battery)
connect the computer &and press volume + & - button together
connect the PC & vol buttons press both are at the same time then you enter the correct EDL mode (same red light but this time correct EDL mode you can flash the rom use official Fastboot rom Dont modify the contents)
if i helped you hit thanks
I was in same situation today: Mobile doesnt do anything else then red-blinking, no edl or fastboot. Pc only saw "Qualcomm HS-USB Diagnostics 900E".
Found the solutions mentioned by Chinmayhegde, but i didnt get the cover off the device and dont want to damage new mobile.
then i found the method "Deep Flash".
its small manipulation of usb-cable: put a small wire on second terminal, put in pc and then pull the wire.
i succeded after second try. then pc sees "Qualcomm HS-USB QDLoader 9008" again and miflash is able to flash the device.
see this tutorial for creating the modded usb cable: http://en.miui.com/thread-310325-1-1.html
Hope it works
if your phone still able to enter fastboot, you can try to use fastboot to edl v2 to enter download mode
if it still not help, most safe & easy mode is using deep flash cable as above post
I have same problem.
Even I try booting fastboot mod but it keeps restarting.
Even fastboot logo comes by just pressing volume down button. So I think power button is stuck. That's make phone restart all the time.
How to overcome this problem?
Thanks
Sent from my SM-G900I using XDA-Developers mobile app
I fix my phone.
Open back cover and undo power cable flex and battery connctor from motherboard and put back after 1 min.
Phone started normal.
thanks
Sent from my SM-G900I using XDA-Developers mobile app
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
Try To Remove Your Battery than Use MiFlash Tool To Flash Your Mobile Bro.
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Try going to Fastboot Mode using Power Button and Vol Down. If you can go to Fastboot, then I'm pretty sure you'll be able to go to EDL Mode. Just look up online how to go to EDL Mode from Fastboot. I think the command to be typed in the cmd window is 'fastboot reboot edl'.
If that works, and you have your Qualcomm drivers installed, you should be able to flash a Fastboot ROM using Mi Flash Tools.
Cheers!
[email protected] said:
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Click to expand...
Click to collapse
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
manakmishra said:
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
Click to expand...
Click to collapse
Open kenzo a.k.a. redmi note 3 disconnect battery
Then connect USB just to mobile not to PC
Then connect battery don't press any button
Connect USB to PC while pressing volume up button
Start mi flash tool click on refresh button see if it detects.
Start flash
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Simply do this : https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Then flash latest global dev rom in Miflash (refresh when phone isn't detected http://en.miui.com/a-234.html
since you can't boot, it might be worth your time to take a look at this.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
It's a tutorial to make a 'deep-flash' cable using a micro usb cable that will force your device into fastboot mode, much like samsung's USB jig.
If that works, then you can try following this tutorial :
http://en.miui.com/thread-235865-1-1.html
You can use the link given in post #6 to boot to edl, then flash a stock MIUI ROM using MiFlash.
If all else fails, it might be time to consider taking it to the Mi service centre.
Hello Members,
The device was stuck in boot loop so i tried to flash via EDL mode. First it came to edl mode but while flashing i got some XML error. Now i tried to put the phone again in EDL mode but its not working.
I had removed the battery and and i have connected to 2 jumper pins 1 and 4 and connect the usb but the phone dont seems to come to edl mode. just flashes the MI screen and power off repeatedly.
Now i connect the phone directly with battery on and its coming as charging but surprisingly the phone got detected, the device manager shows the phone as Linux file stor gaget usb device. I tried to flash with mi flash tool and its running indefinitely saying flashing..
Help...