onda v971 v3 quad IPS (allwinner A31)
help me (if it is possible) i messed it up!
i installed twrp, but made as i understand many things wrong!
- after flashing twrp, i wiped everything from within twrp (now says no os installed).
I just can get to twrp with both home and power pressed.
The problem is the tablet refuse to get recognized at all (win xp & win 10) - nothing not even a beep as a connected device!
* Also flashing with phoenix is not applicable since the home button, (insert otg mini us plug) and pressing 10 times (or more) the power while the home is pressed, still does not make the tablet get recognized by phoenix (i did it many many times carefully) and the appropriate order.
Can i do anything else?
ps. also it cannot recognize sd card to install a cyanogenmod from there. Not usb disk by otg.
Related
Hi there,
Got a small problem (not sure it's so small though).
What i did :
Tried to update my Archos 70H - 250GB to the latest version via recovery menu(2.4.82) (wifi update didn't work - it said that internal storage is not available - i think i'll have to replace the HDD too-got an 160 gb Drive that i'll pop in this weekend to test)
It had Froyo before (i have to aos file for that one too but i can remember the version).
Problems:
-Boot loop at first Archos Logo.
- Can't enter Recovery menu with Power + Volume Down
(I pressed power for 12 seconds to make sure it's off. after that i tried to enter recovery menu)
All i get is a boot loop. If i try to enter the recovery menu i get a black screen after the Archos logo.
-The PC (Win Xp Pro SP3) doesn't see the Archos connected unless i'm in the recovery mode to load the new firmware
Questions :
-Can i try a "blind" flash - going trough the menu options even without seeing them ( if someone around would tell me exactly how many Volume-/Power to press and when)
- IF anyone has any suggestions please let me know as i ran out of ideas.
Thank you.
Solved
This is what worked for me :
1. Opened the tablet.
2. Took it apart.
3. De-soldered the battery wires from board
4. Scanned the original HDD in my PC ( everything working fine)
5. Left it like that while i was at work
6. Re-soldered the battery wires
7. Put it back in 1 piece (including the HDD)
8. Start
Is started straight in the new android.
The hdd is working again (i still don't know what the problem was)
The developer os is working too
Wrote everything here in case anyone needs it.
i have a problem too on my archos 70h if u try to start on i just entering in recovery menu. not from its original os. can you help how to flash this android to restore from its original state.
I picked up an AGPTek 7" Tablet TP10W. It's based around a 1.2ghz dual core A9, 400 Mali which I believe is a WM8500???? The tablet came with ICS 4.0.3.
I accidentally flashed the wrong ROM to it trying to fix a bug. Now I can start up Android but cannot use the touch screen, and the rotation is off. I can use a usb mouse to navigate, and I can connect to wifi.
The tablet is unlocked, rooted and has SU. I haven't been able to find a version of clockwork recovery mode that will run on this tablet, each time I go into recovery mode I end up with the dead Android on his back.
AGPTek supplied me with an IMG file of the original ROM, but that requires LiveSuit to flash it. When trying to use LiveSuit on my Windows 7 x64 machine the drivers supplied for the tablet don't work, so Livesuit cannot see the tablet when plugged in via USB and wont run. The instructions provided by AGPTek tell me, when the tablet is off, hold down any button on the device, then plug it in via USB, then while still holding the button, to repeatedly press the power key which should put it into download mode. This does not work, the tablet does nothing when following the proceedure. I get it into recovery mode by holding down the vol+ key and power key during start but this gets me back to the dead Android as I can't seem to find a version of CWM that will run.
At this point I'll make do with being able to just get back to the previous ROM, but ideally I'd like to get CWM or another recovery program onto the tablet so I can explore CM9 and C10 roms.
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
dragonfly14 said:
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
Click to expand...
Click to collapse
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
UltraWelfare said:
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
Click to expand...
Click to collapse
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
dragonfly14 said:
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
Click to expand...
Click to collapse
Using ADB is a good idea .I didn't think of that though :silly:...
UltraWelfare said:
Using ADB is a good idea .I didn't think of that though :silly:...
Click to expand...
Click to collapse
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
dragonfly14 said:
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
Click to expand...
Click to collapse
Wait I found something for you
There is a few tricks to get your Tablet back , You require a few things
-A usb cable to connect to computer
-Internet connectivity
Now Lets start by putting the tablet in Android recover mode .
1. Connect the tablet to the USB port on the Computer .
2. Press and hold the power button and the Big button on the tablet , Keep pressing it until the logo of the android gut with his gut open shows up .
3. It is possible to perform a reset using the ADB (Android Debug Bridge)
I did mine on Windows XP , (Does your tablet install correctly in the Device manager? )
If so That is great news , You may goto step 5
If not Goto step 4 :
Step 4: Getting the Chinese driver equivalent for your tablet .
Get the drivers for the Ainol 7" Auror tablet (or equivalent )
Now Before the driver will work with your device (you can try to install it but it will give you an INF error)
You must edit the file (.INF) to match your USB id of the tablet
(At the bottom of the file change the STRINGS section to the device codes of your tablet ) (found by right clicking the Unknown device in the device manager . the (VID_1f3a_PID_efe8) is the HARDWARE ID and the
[Strings]
USBDRV="USB Devices"
USB\VID_1f3a&PID_efe8.DeviceDesc="USBDevice(VID_1f3a_PID_efe8)"
YOUR STRINGS:
USBDRV="USB Devices"
USB\<YOURDEVICEID>.DeviceDesc=USBDevice(<YOURDEVICEID>)"
Step 5:
Get the Recovery tool from here
https://spideroak.com/share/KNQW243.../CWM_Recovery_Manta_MID08_windows_install.zip
This will give you a suite of tools to restore your device to factory reset
Use it to install the recovery partition , and then reboot your device in recovery mode , Then use the Vol + and - buttons to navigate and power button to Enter .
(Source : click here)
Hello there, i have a Hipstreet too, but my android have crashed and dont turn on anymore.
I cant find the stock rom or custom rom anywhere.
Can you find some of these?
If you dont, you can make a backup and send a link to me?
Thanks and sorry for the english.
Hello everyone,
First of all, let me tell you that I am very good at android rom flashing and stuff and know these things. Now, here is my problem.
1. I have Aoson M19 tablet, which fell and the lcd screen stopped working.. The touch still work as I can see the output on HDMI by connecting it to an external screen. It lied in its box for sometime before I took it out again...
2. It had a pattern lock, which I unfortunately forgot, so after trying many times, it is stuck asking for my email/password immediately after boot (however the wifi is disabled at start so it never goes anywhere)
3. The tablet does not have a volume button, It has a button for Power, Escape, Home and Menu. I tried all combinations possible (as much as I could) to try and boot it so that it is recognized as an Rockchip 2918 device on my pc connected to it, but it does not work at all..
4. I tried using adb but it never shows it as a device when connected..
So I would like to ask the gurus as xda on how can I get my tablet back by either installing a new ROM (if I can get it to be recognized as rockchip device I can install drivers for it), or some other way to bypass the pattern lock somehow. Maybe some sdcard boot trick which I am unaware of till now..
(Note: this is indeed my device, not trying to hack into someone elses). Any help appreciated...
Maybe this will help: http://forum.gsmhosting.com/vbb/f90...pattern-problem-paswword-without-adb-1717216/
It was mentioned on the last page that Rockchip devices without Volume keys must connect the usb cable to PC and the port on tablet and press the reset button in the hole and the tab will be booted into the correct mode.
Tools: http://www.solidfiles.com/d/747bdce149/Rockchip_Batch_Tool_v1.7.rar
Firmware: http://www.szaoson.com/UploadFiles/Help/20130829102744_71726.rar ( 4.0 ICS v.1 )
My understanding is that the method for flashing Rockchip tablets is essentially the same across the board. So maybe try this guide for some general direction: http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
I don't know if this will work for your particular Rockchip tablet, but I also found this: http://forum.gsmhosting.com/vbb/f90...re-tool-how-use-guide-share-sonualok-1786042/
Please keep in mind that I do not have said tablet and am only going off of info I have found on the various forums that people reported success with. Also, be sure you do have the RK2918 version as there is a dual core RK3066 model with the same name floating around that I had noticed. The link provided is for a 2918 version. Good luck!
es0tericcha0s, you are a star, let me try and i will be back with the results.. I hope something will surely work..
Ok tried the reset button trick also, pressing it and holding before connecting the usb, and pressing after connecting usb, also tried the same with power button, but it always boots in android. And as usual the device keeps appearing as 'MID' in devie manager...
still stuck
Quick update
Ok quick update, I finally found the way to get it recognized differently (good or bad)
For Aoson M19, Hold the 'Home' key on tablet and then connect the usb cable to PC. However, it still refuses to install the drivers for the device..
See attached picture, still working on it...
Hi people!
I have this headache with this tvbox since it got stuck at android logo (idk what my uncle did to this device). I can't enter recovery mode, despite I tried with all methods like hard reset button, usb flashing with phoenix suit, or microsd card flashing, it only stays at red light. It even doesn't get recognized by windows (It says "unknonwn device" on device manager).
I tried everything, installing adb legacy drivers, tried with both usb ports, holding the reset button for a looong time and nothing.
So please, I need help of this great community!
Did you find any solution for this mate?
take a wooden toothpick, press the button through the av output one second after power on, after 5 seconds release the button and wait for the device to be cleaned. after that the box will work