Hi people!
I have this headache with this tvbox since it got stuck at android logo (idk what my uncle did to this device). I can't enter recovery mode, despite I tried with all methods like hard reset button, usb flashing with phoenix suit, or microsd card flashing, it only stays at red light. It even doesn't get recognized by windows (It says "unknonwn device" on device manager).
I tried everything, installing adb legacy drivers, tried with both usb ports, holding the reset button for a looong time and nothing.
So please, I need help of this great community!
Did you find any solution for this mate?
take a wooden toothpick, press the button through the av output one second after power on, after 5 seconds release the button and wait for the device to be cleaned. after that the box will work
Related
I swapped my son my Droid 4 for his LG-VS700 and I attempted to root it yesterday but failed
It seems there's a lot of issues I'm having and not sure how to resolve them
For example the HARD RESET for the LG-VS700 is
-Press and hold the Power button+Home key+Volume down key simultaneously then release 3 seconds after the LG logo appears.
-Once the LG logo disappears, an Android logo will briefly appear indicating that the reset is in process.
-The reset process may take up to 90 seconds to complete.
When I do this it shows the Android Logo and starts to reset then it reboots automatically and never resets
that's one issue
another one is the USB Debugging
On the Droid I could turn that off and on. It did not matter if it were plugged into the laptop or not. Is it normal that the USB Debugging option be "Greyed out" when the device is plugged into the Laptop?
I've tried every which way to get the laptop to recognize the device but it never shows on on my adb list in cmd prompt and every guide I've tried to use doesn't work because it seems nothing is detecting the device
I've updated with the latest drivers and installed the android sdk tools like many guides have suggested. I think once I've actually gotten the little debug icon to show up on my device screen in the upper corner but now it only shows the USB icon and charges.
I've tried several USB plugs incase it was the plug .. I've ensured all software was up to date. I've actually installed and uninstalled software over and over thinking it just didn't install properly
These are very odd errors to me that I've not seen before and cannot find answers to
1. Hard Reset not working properly (reboots instantly on the Android Logo)
2. USB Debugging being "Greyed out"
3. Device just not being detected by Laptop even with updated software
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
abottoni said:
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
Click to expand...
Click to collapse
What brand is that tablet? Specs on it? Looks identical to mine. I got mine to flash by using livesuit and the faaastjb v2.5. Start livesuit, select your rom image that you choose. Make sure tablet is unplugged from usb, but plugged into charger, and it is off. Hold the volume up button, then plug the usb in (computer and tablet). Press the power button repeatedly until you hear the windows sound when you plug in a usb device. Once you hear this, stop pressing power, and let go of the volume up button. You should hear the sound in windows like its disconnected, then reconnected and then livesuit will ask if you want a complete flash (erase and flash) or upgrade. Then just let it go.
Hopefully this helps you, and if you do have the same tablet as me, I would be very grateful if you would send me a factory dump so I can get proper drivers!
Hi,
my Pipo M6 per wifi hangs itself while starting, i.e. he gets stuck with the loading picture. Indeed, with the Reset he restarts, however, gets stuck also again. After he gets stuck, he can be also switched off no more, except by Reset.
And I also do not come to the Recovery mode, I thought, maybe helps a new firmware. However, sometimes he registers if I hold the keys while starting low-spirited, that Android little manes with open belly and warning sign. see below.
If I hang him by USB on my Win7 pc, a wrong driver's file is installed constantly, either Samsung or HTC, so that the Flashtools register that no suitable device is connected. With the USB driver of Pipo the pc says that that is no suitable driver's file.
What can I do?
And over again for stupid ones: I come to the Recovery fashion, nevertheless, dur volume press ESC and power at the same time, or?
Please, can anybody help me?
Nobody can help?
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Try one of the 2 methodes
gnom68 said:
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Click to expand...
Click to collapse
A This is the easiest way: Do a HARDRESET
Recovery Mode (for Factory Reset):
-----------------------------------------------------------
1. [Reset] (on the backside)
2. [Power] + [Vol-]
3. green Android shows up
4. press [Vol-] + [Vol+] + [ESC] together till Menu shows up (if it's not showing up try to press it a few once more)
OR
B For advanced users: Flash the original Firmware (download from here it is a very slow download )
and use the howto which is delivered within the downoad.
Maybe you can find some usefull information here
Hope i could help u. For me it was working fine.....
Hello everyone,
First of all, let me tell you that I am very good at android rom flashing and stuff and know these things. Now, here is my problem.
1. I have Aoson M19 tablet, which fell and the lcd screen stopped working.. The touch still work as I can see the output on HDMI by connecting it to an external screen. It lied in its box for sometime before I took it out again...
2. It had a pattern lock, which I unfortunately forgot, so after trying many times, it is stuck asking for my email/password immediately after boot (however the wifi is disabled at start so it never goes anywhere)
3. The tablet does not have a volume button, It has a button for Power, Escape, Home and Menu. I tried all combinations possible (as much as I could) to try and boot it so that it is recognized as an Rockchip 2918 device on my pc connected to it, but it does not work at all..
4. I tried using adb but it never shows it as a device when connected..
So I would like to ask the gurus as xda on how can I get my tablet back by either installing a new ROM (if I can get it to be recognized as rockchip device I can install drivers for it), or some other way to bypass the pattern lock somehow. Maybe some sdcard boot trick which I am unaware of till now..
(Note: this is indeed my device, not trying to hack into someone elses). Any help appreciated...
Maybe this will help: http://forum.gsmhosting.com/vbb/f90...pattern-problem-paswword-without-adb-1717216/
It was mentioned on the last page that Rockchip devices without Volume keys must connect the usb cable to PC and the port on tablet and press the reset button in the hole and the tab will be booted into the correct mode.
Tools: http://www.solidfiles.com/d/747bdce149/Rockchip_Batch_Tool_v1.7.rar
Firmware: http://www.szaoson.com/UploadFiles/Help/20130829102744_71726.rar ( 4.0 ICS v.1 )
My understanding is that the method for flashing Rockchip tablets is essentially the same across the board. So maybe try this guide for some general direction: http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
I don't know if this will work for your particular Rockchip tablet, but I also found this: http://forum.gsmhosting.com/vbb/f90...re-tool-how-use-guide-share-sonualok-1786042/
Please keep in mind that I do not have said tablet and am only going off of info I have found on the various forums that people reported success with. Also, be sure you do have the RK2918 version as there is a dual core RK3066 model with the same name floating around that I had noticed. The link provided is for a 2918 version. Good luck!
es0tericcha0s, you are a star, let me try and i will be back with the results.. I hope something will surely work..
Ok tried the reset button trick also, pressing it and holding before connecting the usb, and pressing after connecting usb, also tried the same with power button, but it always boots in android. And as usual the device keeps appearing as 'MID' in devie manager...
still stuck
Quick update
Ok quick update, I finally found the way to get it recognized differently (good or bad)
For Aoson M19, Hold the 'Home' key on tablet and then connect the usb cable to PC. However, it still refuses to install the drivers for the device..
See attached picture, still working on it...
Hello everyone!
I got a clone T95X box, on the info it says it's a Nexbox A95X 1GB/8GB. I installed TWRP then booted into it, started testing and erased all partitions (yeah dumb) on the advanced wipe screen.
I had made a backup of all the partitions to an external drive (I still have it) before I did this so I thought "ok no big deal" and went to grab a drink before I restored it. When I came back someone or one of the dogs had pulled or kicked the power cord and it was turned off!
Now when I power it on all I get is a red light, no image no nothing.
What I tried so far:
1- Magic SDcard method with cyx_NEXBOX-A95X_S905X_8189etv_8g1g_kodi_addons_161104_SD_USB firmware -> nothing
2- USB Burning Tool 2.0.8 -> device doesn't show up, no matter what I do or how I connect it to the USB male to male cable. Tried monitoring the device manager on windows 10 x64 but when I plug the cable on absolutely nothing happens.
3- http://freaktab.com/forum/tv-player-...962#post306962 tried this method using the uboot.bin image from the cyx firmware above. Nothing happens.
I have no clue of which pins to short on the nand (it's a Eudar EMS1ASCBT1FC008 module) so if anyone knows the pins for this one, PLEASE share!
I've run out of things to try, can you guys help me out reviving this box?
Thanks a LOT for the help!!!
With the USB burning tool did you try to press "Start" before connecting your box on your PC?
Do you have a reset button inside the a/v port?
Yep, tried the "press start before then connect the box" method.
It does have the reset button, I tried doing the above both with reset pressed and not pressed, in both USB ports... still nothing...
Have you found a solution? Same situation
Sent from my Nexus 6 using Tapatalk