Related
Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
I have tested this with 3 different cases except the Spigen because I haven't received it yet but I don't think that this case will be the exception
Sent from my SM-N9005 using Tapatalk
BlueChris said:
I have tested this with 3 different cases except the Spigen because I haven't received it yet but I don't think that this case will be the exception
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, but what was the outcome? were u able to charge with the third party cases? Are the charging times same.. slower or faster.
With Samsung charging kit that includes the back cover and the pad, they claim that the charging is faster than conventional charging cos it charges at 600MAh's.
M8 QI has sensor at least my pad has so if it beeps and light goes green in pad no matter if I have the phone naked or in a case it charges with 640ma this charge my phone in 4 to 5 hours which occurs every night and I am fine. Imagine that I had put a plastic cap in bottom of phone to have the usb3 plug clean from dust.
Sent from my SM-N9005 using Tapatalk
Wireless Chargeing
MANswers said:
Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
Click to expand...
Click to collapse
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
BlueChris said:
M8 QI has sensor at least my pad has so if it beeps and light goes green in pad no matter if I have the phone naked or in a case it charges with 640ma this charge my phone in 4 to 5 hours which occurs every night and I am fine. Imagine that I had put a plastic cap in bottom of phone to have the usb3 plug clean from dust.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Plugging off the port is a good idea.. thanks for your response.. i will start reviewing good wireless chargers now including the one you mentioned and the one jerry mentions below.
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
Jerry thanks for your response and your the discount code. i will start reading the pros and cons of the charger.
Can you try to upload some pictures etc.. i like the 45 degree slant.. its like a dock.. that charges wirelessly.. instead of placing on a pad. Good stuff.
Pls try to put some reviews. If you can today i will place the order tonight.
The 45 degree needs inside the back cover I think 4 metal things and the base has magnets and that's how it stands. I have this http://pages.ebay.com/link/?nav=item.view&id=360732881624&globalID=EBAY-AU and is working fine, I had post a video also in the 1st wireless thread here https://www.youtube.com/watch?v=9LaQQnc2dmU&feature=youtube_gdata_player that I demonstrate it
Sent from my SM-N9005 using Tapatalk
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
That's just your standard Qi charging pad. Won't work with your N3 unless you have the 'official' Samsung charging back plate, or you modify a receiver between your stock back plate, and battery.
In my experience,
With the samsung charging back plate, none of the standard N3 cases will fit on the phone anymore. It's because the back plate is thicker than the stock one.
With a receiver installed between the stock back plate and battery, it will bulge out. I don't like that either.
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
Another thing, the charger is a 1Amp charger, i believe for the N3 you need atleast 2Amp.
skyline23 said:
That's just your standard Qi charging pad. Won't work with your N3 unless you have the 'official' Samsung charging back plate, or you modify a receiver between your stock back plate, and battery.
In my experience,
With the samsung charging back plate, none of the standard N3 cases will fit on the phone anymore. It's because the back plate is thicker than the stock one.
With a receiver installed between the stock back plate and battery, it will bulge out. I don't like that either.
Click to expand...
Click to collapse
I am not sure if the N3 and S4 use the same charging technology, cos in this video below the guy is charging a S4 on the TYLT
http://www.youtube.com/watch?v=K5g2rVraB1g
The thing i like about tylt is that it has three coils for charging unlike one for others, where u dont have to find the sweet spot... and lay your phone to pickup the right spot for charging.. demo on this video
http://www.youtube.com/watch?v=hF3yFvMXKZw
MANswers said:
I am not sure if the N3 and S4 use the same charging technology, cos in this video below the guy is charging a S4 on the TYLT
http://www.youtube.com/watch?v=K5g2rVraB1g
The thing i like about tylt is that it has three coils for charging unlike one for others, where u dont have to find the sweet spot... and lay your phone to pickup the right spot for charging.. demo on this video
http://www.youtube.com/watch?v=hF3yFvMXKZw
Click to expand...
Click to collapse
What I was trying to clarify, that even if you bought that charging stand, you'll need the wireless receiver on the phone itself.
That didn't seem clear to everyone on this thread.
skyline23 said:
What I was trying to clarify, that even if you bought that charging stand, you'll need the wireless receiver on the phone itself.
That didn't seem clear to everyone on this thread.
Click to expand...
Click to collapse
I still didnt get that mate.
T-Mobile's site mentions that this charger is compatible with Note 3
http://www.t-mobile.com/accessories/tylt-wireless-charger-black.html#features
And it doesnt mention about any charging receiver based cover
Code:
Compatible Devices
Galaxy Note 3 - Black
Galaxy S® 4 - Black Mist - 16GB
Lumia 810
Lumia 925
Nexus 4 - No Annual Contract
Galaxy Note 3 - White
Galaxy S® 4 - White Frost - 16GB
Lumia 810 - Refurbished
Nexus 4
Nexus 4 - White
MANswers said:
I still didnt get that mate.
T-Mobile's site mentions that this charger is compatible with Note 3
http://www.t-mobile.com/accessories/tylt-wireless-charger-black.html#features
And it doesnt mention about any charging receiver based cover
Code:
Compatible Devices
Galaxy Note 3 - Black
Galaxy S® 4 - Black Mist - 16GB
Lumia 810
Lumia 925
Nexus 4 - No Annual Contract
Galaxy Note 3 - White
Galaxy S® 4 - White Frost - 16GB
Lumia 810 - Refurbished
Nexus 4
Nexus 4 - White
Click to expand...
Click to collapse
That's only if you have the official Samsung charging back installed.
See this link;
http://www.mobilefun.com/40793-official-samsung-galaxy-note-3-wireless-charging-cover---black.htm
The Note 3 does not support wireless charging unless you buy that back, or a receiver that goes between the battery and stock back plate.
http://www.amazon.com/Standard-Wire...40793&sr=8-4&keywords=note+3+wireless+charger
skyline23 said:
That's only if you have the official Samsung charging back installed.
See this link;
http://www.mobilefun.com/40793-official-samsung-galaxy-note-3-wireless-charging-cover---black.htm
The Note 3 does not support wireless charging unless you buy that back, or a receiver that goes between the battery and stock back plate.
http://www.amazon.com/Standard-Wire...40793&sr=8-4&keywords=note+3+wireless+charger
Click to expand...
Click to collapse
Thanks for all the links.
I guess i understand about the receiver now. Just read the whole wireless charging thread on this section.
This is totally new to me, hence the confusion... the back cover you mentioned.. does it add bulk to the phone.. as in thickness?
Is there a way a single coil or some chip can be added to the current phone cover. I have verizon model.
MANswers said:
Thanks for all the links.
I guess i understand about the receiver now. Just read the whole wireless charging thread on this section.
This is totally new to me, hence the confusion... the back cover you mentioned.. does it add bulk to the phone.. as in thickness?
Is there a way a single coil or some chip can be added to the current phone cover. I have verizon model.
Click to expand...
Click to collapse
Yes, the samsung wireless charging cover is thicker. Will add 2mm, therefore, all your cases won't fit. Including the Neo Hybrid.
You can get receiver that goes between the battery and cover, but from my experience, it makes the rear cover bulge a bit.
MANswers said:
Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
Click to expand...
Click to collapse
1) Samsung has a wireless charging back (wireless receiver built-in) that replaces the battery cover/back already on the phone.
It makes the phone too thick for a case (a bumper might work).
2) They also make a S-view flip cover that replaces the stock back and has the wireless receiver built-in, no additional case needed.
3) Aftermarket Qi receivers can be purchased on Amazon and eBay that are placed inside the stock back cover, and if they don't cause a significant bulge in the back you can use a normal case, but one with a TPU or silicone back is most likely to work.
4) If you have a Qi receiver from a Note 2 (or similar) you can modify it to work inside the stock back cover.
ALL of those methods will require a Qi transmitter, or charging pad.
At least one seller on Amazon is offering a kit with both the Qi insert & charging pad, about $30 when I last looked.
Sent from my Nexus 10 using xda app-developers app
skyline23 said:
Yes, the samsung wireless charging cover is thicker. Will add 2mm, therefore, all your cases won't fit. Including the Neo Hybrid.
You can get receiver that goes between the battery and cover, but from my experience, it makes the rear cover bulge a bit.
Click to expand...
Click to collapse
One the posts mentioned in the wireless charging thread..
http://detail.tmall.com/item.htm?sp...289ff7c5f8bb4fe28bbdb230a58&scene=taobao_shop
and
http://dx-box.com/qi-wireless-charg...msung-galaxy-note-iii-3-n900-n9005-n9000.html
Looks like these recievers can be easily inserted into the back cover.. anyone tried it yet? or whats your opinion about this?
Adding the official samsung back cover with 2mm is not a big issue, but i dont wan to loose the phone protection without a neo hybrid.
gnik luap said:
1) Samsung has a wireless charging back (wireless receiver built-in) that replaces the battery cover/back already on the phone.
It makes the phone too thick for a case (a bumper might work).
2) They also make a S-view flip cover that replaces the stock back and has the wireless receiver built-in, no additional case needed.
3) Aftermarket Qi receivers can be purchased on Amazon and eBay that are placed inside the stock back cover, and if they don't cause a significant bulge in the back you can use a normal case, but one with a TPU or silicone back is most likely to work.
4) If you have a Qi receiver from a Note 2 (or similar) you can modify it to work inside the stock back cover.
ALL of those methods will require a Qi transmitter, or charging pad.
At least one seller on Amazon is offering a kit with both the Qi insert & charging pad, about $30 when I last looked.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Thanks that is great information. Can you post the amazon link?
BlueChris said:
The 45 degree needs inside the back cover I think 4 metal things and the base has magnets and that's how it stands. I have this http://pages.ebay.com/link/?nav=item.view&id=360732881624&globalID=EBAY-AU and is working fine, I had post a video also in the 1st wireless thread here https://www.youtube.com/watch?v=9LaQQnc2dmU&feature=youtube_gdata_player that I demonstrate it
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I was looking at the video again, it doesnt look like attaching the receiver on your original cover has added any bulk or thickness right? Do you think it will fit the neo hybrid case.
Amazon has these receivers for 10 bucks or so.. i was planning to get one of these receivers and then get the TYLT pad for charging.. I was reading reviews accross various forums, and people are having high opinions about TYLT's features.
MANswers said:
One the posts mentioned in the wireless charging thread..
http://detail.tmall.com/item.htm?sp...289ff7c5f8bb4fe28bbdb230a58&scene=taobao_shop
and
http://dx-box.com/qi-wireless-charg...msung-galaxy-note-iii-3-n900-n9005-n9000.html
Looks like these recievers can be easily inserted into the back cover.. anyone tried it yet? or whats your opinion about this?
Adding the official samsung back cover with 2mm is not a big issue, but i dont wan to loose the phone protection without a neo hybrid.
Thanks that is great information. Can you post the amazon link?
Click to expand...
Click to collapse
The cheap one may have been from eBay, or it's gone up.
Best price I see for a kit now is $48, http://www.amazon.com/Standard-Wire..._1_3?s=wireless&ie=UTF8&qid=1382047175&sr=1-3
There is a $10 qi insert:
http://www.amazon.com/Docooler-Stan...1382048041&sr=1-19&keywords=note+3+qi+charger
plus a $20 charging pad:
http://www.amazon.com/DigiYes®-Stan...1382048041&sr=1-23&keywords=note+3+qi+charger
By the way, I ordered an insert from that seller, it said "in stock" but the expected delivery time was 24 to 43 days once I got the order in. It does seem like you should know that before ordering.
Sent from my Nexus 10 using xda app-developers app
gnik luap said:
The cheap one may have been from eBay, or it's gone up.
Best price I see for a kit now is $48, http://www.amazon.com/Standard-Wire..._1_3?s=wireless&ie=UTF8&qid=1382047175&sr=1-3
There is a $10 qi insert:
http://www.amazon.com/Docooler-Stan...1382048041&sr=1-19&keywords=note+3+qi+charger
plus a $20 charging pad:
http://www.amazon.com/DigiYes®-Stan...1382048041&sr=1-23&keywords=note+3+qi+charger
By the way, I ordered an insert from that seller, it said "in stock" but the expected delivery time was 24 to 43 days once I got the order in. It does seem like you should know that before ordering.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that info, i was about to place an order with that seller.. why wait for over a month when you can get the same from a US seller for the same price.
I was wondering if the receiver for Note 2 will work on the Note 3.
Many a US sellers are selling the recievers for Note 2.
http://www.ebay.com/itm/Qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item565c879fa2
Please list out Xperia Z2 Dock and Car Dock here
I was hoping to see a car dock with built in charger.
Sent from my HTC One X using Tapatalk
Sony XSP-N1BT
http://www.sony.co.uk/electronics/in-car-receivers-players/xsp-n1bt
Found this today while looking for a new car stereo, all I can say is WOW!
It's purpose built to be used with the Xperia phones - acts as a phone dock and charges through the charging strip. I've seen pricing is going to be $250 and it'll be released in May, hopefully it's available in the UK at a reasonable price.
Not sure if this youtube link will show up correctly.
fatguy666 said:
http://www.sony.co.uk/electronics/in-car-receivers-players/xsp-n1bt
Found this today while looking for a new car stereo, all I can say is WOW!
It's purpose built to be used with the Xperia phones - acts as a phone dock and charges through the charging strip. I've seen pricing is going to be $250 and it'll be released in May, hopefully it's available in the UK at a reasonable price.
Not sure if this youtube link will show up correctly.
Click to expand...
Click to collapse
Looks amazing! Hope the price will be reasonable...
Oh my word that looks cool !
I`d be very tempted to swith out my genuine VW for one of those !
Thanks
For the car would the Z1 car dock work since both phones are similarly sized?
http://www.sonymobile.com/global-en/products/accessories/smartphone-car-holder-spa-ck20m/
prazvt said:
For the car would the Z1 car dock work since both phones are similarly sized?
http://www.sonymobile.com/global-en/products/accessories/smartphone-car-holder-spa-ck20m/
Click to expand...
Click to collapse
Just checked the specs and it seems that this is compatible with over 15 xperia devices so it would be safe to assume it would be compatible with the z2. I think the thing that let's it down is that it does not come with any form of charging capability though
Sent from my iPad using Tapatalk
dwoodwar said:
Just checked the specs and it seems that this is compatible with over 15 xperia devices so it would be safe to assume it would be compatible with the z2. I think the thing that let's it down is that it does not come with any form of charging capability though
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Well, my Samsung Note 3 dock is the same way. It doesn't have a built in charger like the Galaxy S2 dock used to. So I have to plug in a micro-usb car charger separately. I got a magnetic car charger from Amazon, so I'll probably end up doing something similar for the Z2.
I may go ahead and order the Sony one; speaking of which, I received the dk36 magnetic charger today as well.
And I think that is the direction I'll go. Official dock + magnetic charger. Currently have the official HTC one x dock and the quality of that is significantly better than any other 3rd party cheap dock I have tried before. Hoping Sony dock is good quality
Sent from my HTC One X using Tapatalk
That car dock looks pretty much the same as many if the universal docks.
I think I may just have Fab my own since it doesn't look like they ever offer a proper model specific dock for Sony phones. I can easily modify a cheap hard case with a magnetic charger attached to it for more functional and easy to use dock.
This is one thing I'll miss about Motorola(assuming they've continued doing it), they offer cheap model specific docks that use the same ball mount as Garmin so you options on how you mount it in your car.
I got my magnetic dock the other day, it's smaller than I thought it would be. I was hoping I could put a NFC tag on top of it to trigger some tasker tasks but I don't think it will be close enough to the sensor.
Sent from my Venue 8 3830 using Xparent Red Tapatalk 2
It looks to me like that dock is a unit that you mount in-dash. Once you put the phone in the cradle it "becomes" the head unit. One major benefit to having a built in radio tuner in the phone. Seems pretty awesome to me.
Sent from my LG-P930 using xda app-developers app
Guys, does anyone know where to find a standard car dock with the side claws not covering the magnetic charging port?
EDIT:
Cool.. answered ma own question:
http://www.mobilefun.sg/35798-arkon...ersal-windshield-dash-mount.htm#compatibility
dwoodwar said:
Just checked the specs and it seems that this is compatible with over 15 xperia devices so it would be safe to assume it would be compatible with the z2. I think the thing that let's it down is that it does not come with any form of charging capability though
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
This article says, if a compatible xperia phone is inserted, it can be charged via the magnetic connector.
http://www.mobiflip.de/smartphonedock-sony-xsp-n1bt-soll-das-autoradio-ersetzen/
Sony XSP-N1BT In-Car Smartphone cradle radio system
Finally showing a preorder for this, about £50 more than I was hoping to pay but oh well.
Check out clove.co.uk. search the z1 products they have a powered cradle that uses the side port. Hoping they get az2 one soon
Cool
Cool would it be available in India too...
Sony XSP-N1BT Smartphone Cradle Receiver
Was having a look today for this and seen it on the Halfords site. Priced at £199.99 but with 10% off it came out at £179.99.
Well chuffed as the place I was gonna get it from wanted £214.99 so the price difference will cover the costs of the new facia I'll need so it'll fit my car
fatguy666 said:
Sony XSP-N1BT Smartphone Cradle Receiver
Was having a look today for this and seen it on the Halfords site. Priced at £199.99 but with 10% off it came out at £179.99.
Well chuffed as the place I was gonna get it from wanted £214.99 so the price difference will cover the costs of the new facia I'll need so it'll fit my car
Click to expand...
Click to collapse
Don't forget 3% Quidco or Topcashback as well
fatguy666 said:
Sony XSP-N1BT Smartphone Cradle Receiver
Click to expand...
Click to collapse
I got one from Crutchfield and installed it a couple of days ago - works good so far! I've posted a review on Amazon.
That said, I would probably have chosen a device-specific cradle from Brodit/ProClipUSA if one had been available for the Z2 by now - their Z1 cradles seem nice (and I've had good luck with their previous products for other phones).
Hlorri said:
I got one from Crutchfield and installed it a couple of days ago - works good so far! I've posted a review on Amazon.
That said, I would probably have chosen a device-specific cradle from Brodit/ProClipUSA if one had been available for the Z2 by now - their Z1 cradles seem nice (and I've had good luck with their previous products for other phones).
Click to expand...
Click to collapse
4 stars - good enough for me!
Still waiting on the replacement facia as my Mazda 2 won't take a double din (or single din) without it. Really just hoping the cables I've got for the steering controls work as the manufacturer (Connects2) advised. Heard the Axxess ASWC-1 that you have would definitely control all the functions but the Connects2 guy advised theirs also works and I got it at a fraction of the price compared to the ASWC-1 which seems to be a US product.
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
It holds GN3 securely?
Jc003125 said:
It holds GN3 securely?
Click to expand...
Click to collapse
Not exactly. If i put it on there with no case and like 15 degrees of back lean it holds decently. The backplate isn't as glossy as it needs to be to hold securely though. It's capable of it, they've shown it holding the various Nexus tablets.
That's kind of what this thread is about, trying to find out the best combination of accessories to make this thing work correctly.
Sent from my Galaxy Note 3 via Tapatalk
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
oilfighter said:
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
Click to expand...
Click to collapse
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
B1gC72 said:
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
Click to expand...
Click to collapse
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
oilfighter said:
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
Click to expand...
Click to collapse
So I tried all orientations and no such luck. I think it's the QI adapter.
Sent from my Galaxy Note 3 via Tapatalk
kms108 said:
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
Click to expand...
Click to collapse
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Would also like to report back on the docks performance today. I had my phone on it (in the case) all day with just a small amount of back lean. It held strong on the drive to and from bwork. I also went for some drinks after work and it held strong to and from along a fairly bumpy road. I still want to find a glossy back case but my confidence is growing in the nano suction as is.
I also wanted to report that I put my old Galaxy S1 in it (only phone I have with a glossy back) and it held just like it does in the videos.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
There is three
nillkin has one with qi/ s view function
http://forum.xda-developers.com/showthread.php?t=2605204
yijieneng
powerqi with copper coil (non nfc)
yijieneng and powerqi shown below.
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
rogue931 said:
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
Click to expand...
Click to collapse
You're not the only one, I had similar issues with my Note 3 (actually why I started this thread). I ended up contacting Greg as well and he recommended I purchase a Qi adapter from their site, which did make it function much more reliably. It's acceptable in my opinion at this point but I'm still not 100% sure it's going to charge or stay charging anytime I set it on the AirDock.
Bad news is, my solution isn't really an option with the N4 since (i believe) the wireless charging is built in. I do believe that the Qi charger in the AirDock is generally weak though since I tried about 3 different Qi adapters before finally buying the one from the AirDock site that worked. Otherwise it would do exactly what yours is doing (got both of the things you described with different adapters). I would say try to exchange your docks.
Something that works for me sometimes if it doesn't start charging right away is to unplug the USB cable from the lighter socket side and plug it back in. Also be sure that you are plugged into the 2.1A socket that it comes with, as i found it won't work with the standard 1A plugs most people have laying around.
I really love the concept of the AirDock and I'm glad I backed it but the build quality is certainly suspect. Mine is starting to fall apart after only a few months (the suction pad part is starting to separate from the housing, i can only assume because of how the phone has to be pulled to remove). I think this is par for the course with beta hardware though. Fortunately, customer service was very accommodating in my experience. Hope you're as fortunate.
Yep, actually, I found the thread on the N5 forum after I put my post here. And there indeed seems to be a few complaints with it
I had ne feedback from Greg sincemy email yesterday, but I figure they may be quite busy those days as many people seems to be receiving them.
Well, I hope he will provide a solution, because, for one of the two, with the same symptoms as yours, I can believe it's a problem with positionning, but for the other, the phone start charging for a few minutes and, without it moving, stops ... To me it sounds more like a loose contact somewhere inside the airdock ...
Well, wait'n see, they say ...
I will keep you posted of Greg's answer ..
Any word on how this works with the Note 3's stock "leather" textured back? Is a case required for it to stay?
Also, has anybody tried it with the Samsung brand wireless charger cover? The Air Dock website suggests that the Samsung brand cover is the best wireless charger receiver available; even better than the ones that Air Dock sells.
do you use the Magnetic Sticker?
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
2xbass said:
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
Click to expand...
Click to collapse
I thought for sure I had already posted this response. I ended up getting an AirDock and the OEM Samsung Wireless charging cover for my Note 3. It's been a good setup. I'm not using the ugly sticker. The magnets in the AirDock seem to hold on to some metal in the wireless cover. It isn't as good as a smooth backed device, but it works for the most part. I'm glad I bought it.
That's good to know. Thanks for replying. One way to get a smoother back and increase the adhesion on the AirDock while avoiding the thickness of a case is to get a vinyl wrap although I'm not sure how they would go with the Samsung wireless back since it looks like the shape especially around the camera is slightly different. I have a D-Brand skin on my Nexus 5 and I really love it and it makes the back even smoother. I just got a Note 4 yesterday and have ordered a third-party Qi receiver coil so I'll see how that goes first. Looks like SlickWraps has some nice vinyl skins for the Note 3 and 4.
Also want to report that yesterday I tried my Note 4 with the AirDock using the standard back. At first it did not adhere at all. However I noticed that surface of my AirDock charging pad was pretty dusty. For my Nexus 5 I had been relying mostly on the magnets to hold the phone there. So I cleaned the AirDock with a bit of water as they recommend and the Note 4 holds very securely now. I think if I add a vinyl skin or a very thin case I think it would be even more secure.
guys - which pad do you recommend? I already have a case that's compatible with a pad
http://www.amazon.com/gp/product/B00O152P7G?psc=1&redirect=true&ref_=od_aui_detailpages00
Thx
I use this guy. Works well with the Nexus 6 and my case. Has a littel grip with the rubber pads and has a light to let you know it is charging. You can also put your phone in on its side and adjust it a bit to make it work that way as well.
http://www.amazon.com/Wireless-Char...25550&sr=1-1&keywords=spigen+wireless+charger
I have used many pads and stands and none of them have any trouble charging through my two-layer Ringke Max case. Here are the chargers I've used:
http://www.amazon.com/Itian-A6-Multi-function-Standard-Wireless/dp/B00LFVPRMO
http://www.amazon.com/gp/product/B00HIZ3ZI4/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A294P4X9EWVXLJ
http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
I've had this one since the nexus 4. Used it for the 5 and 6 as well as nexus 7..http://pages.ebay.com/link/?nav=item.view&id=131705857592&alt=web
sam008 said:
guys - which pad do you recommend? I already have a case that's compatible with a pad
http://www.amazon.com/gp/product/B00O152P7G?psc=1&redirect=true&ref_=od_aui_detailpages00
Thx
Click to expand...
Click to collapse
http://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias=aps&field-keywords=3+coil+qi
get a knockoff tylt or make your own. follow my link. I have a tylt I dont see why a knockoff would be any different
Ochee charging pad works great.
I'm using this one since my Nexus 5 and it works wonders with the Nexus 6 as well...
http://www.amazon.com/gp/aw/d/B00F358AVI/
In addition to the Spigen F300W mentioned earlier, I've used the Choetech Iron and am currently using the well-known Tylt Vu.
They all push about 650-700mA (according to Ampere) while charging through my Spigen Ultra Hybrid case. For reference, Ampere reads about 2300mA using the turbo charger.
I use the same powerbot that I've had since my nexus 4 and 5. Still works fine.
Sent from my Nexus 6 using Tapatalk
I really like this one:
http://www.amazon.com/Itian-Wireles...=UTF8&qid=1454555937&sr=8-7&keywords=itian+qi
Had it for over a year.
Also use this in the car (with a couple of mods to make it work better):
http://www.amazon.com/Itian-Vehicle...=UTF8&qid=1454555979&sr=8-4&keywords=itian+qi
I have an Itian branded one that works okay, but is too picky about placement for me. There's no semi-current information that I can find on what wireless charging stands people are using with their Shamu's. Looking for something that works out of the box without frankensteining something together.
I've got one of the Itian stands and a couple of other stands that look like they're the same device with different branding and I've had good luck with them over the years so maybe you just got a bad unit. The best wireless charger I have isn't a stand though, it's a Yootech pad. I have it sitting on the arm of my recliner and it works marvelously
Tylt Vu workshop really good. Quite expensive though. There's other though with the same design and 3 cols for charging. Have a look on Amazon.
The round Samsung one works great
Samsung Mini wireless charging pad Qi EP-PA510B
Works perfectly.
perfectly = how much amepers?
If you have not bought one yet Tylt Vu works really well. I just picked up on off of eBay for $20. there were plenty more available.