Bricked TV Box - MXQ Pro 4K S905X (1+8) - Android Stick & Console AMLogic based Computers

Hello. In start sorry for my English
I have got a problem with TV BoX MXQ Pro 4K S905X (1+8)
Well it’s Bricked.
When i plug to TV its black screen, boot from SD do not work on any ROMS, TWRP or LibreELEC – black screen.
When i plug in to PC and use Amlogic USB Burning Tool (used many version from 2.0.5 to 2.1.6) won’t detect by PC. I try from other computers, other USB cables (USB 3, USB 2+power) i try with plugged power cable.
I try Nand Chip Short Method and it doesn’t work too on any pins or maybe i do this bad
What can i do yet to get this TV BoX alive?
Info about the box:
Signs on board: S905X_MXQPRO_4x8_20170615_V1.1
Signs on blue sticker: RK201706270001, MXQPRO DDR3-ESS, DL 1+8 0701A
Sings on nand flash: ESSENCORE i3t-8GQ8T2h5TARC
Signs on WiFi chip?: SV6051P (TAB1621, BCF71)
Photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

---

Hi try this first with the given tools
https://chinagadgetsreviews.com/download-lollipop-5-1-1-firmware-leoxsys-lt33br-4k-tv-box.html.
If you are not sure for the processor removes the radiator to check, you can stick it with thermal paste.

---

RKBatchTool-v1.8 don't see the device. How can i remove the radiator? - it's strongly sticky.
PS: First few times my box connet to pc on "Amlogic USB Burning Tool" but right now all the time i can't connect BoX to PC.

---

CrockeRiX said:
RKBatchTool-v1.8 don't see the device. How can i remove the radiator? - it's strongly sticky.
PS: First few times my box connet to pc on "Amlogic USB Burning Tool" but right now all the time i can't connect BoX to PC.
Click to expand...
Click to collapse
Leverage from below
---------- Post added at 09:59 PM ---------- Previous post was at 09:35 PM ----------
try the shunt on the first two pins of the right nand or on the seven and eight

---

carribou60 said:
Leverage from below
---------- Post added at 09:59 PM ---------- Previous post was at 09:35 PM ----------
try the shunt on the first two pins of the right nand or on the seven and eight
Click to expand...
Click to collapse
Ok I took off the radiator and now im sure its - Amlogic S905X Quad-Core.
I try today these pins and nothing happend. Maybe i do it wrong? Can u wirte me the sequence, step by step?

---

CrockeRiX said:
Ok I took off the radiator and now im sure its - Amlogic S905X Quad-Core.
I try today these pins and nothing happend. Maybe i do it wrong? Can u wirte me the sequence, step by step?
Click to expand...
Click to collapse
I do not have the same nand, the pins may not be the same.I connect the USB cable to the box and then to the PC I press the button av and I hold it then I shunt the pins 7 and 8 ( on some nand it's the pins 1 and 2). There the software indicates connected.
Envoyé de mon PRA-LX1 en utilisant Tapatalk

---

carribou60 said:
I do not have the same nand, the pins may not be the same.I connect the USB cable to the box and then to the PC I press the button av and I hold it then I shunt the pins 7 and 8 ( on some nand it's the pins 1 and 2). There the software indicates connected.
Envoyé de mon PRA-LX1 en utilisant Tapatalk
Click to expand...
Click to collapse
Well i tryied now in steps:
1. Run USB Burning tool
2. Import Image
3. Push start
4. Connect USB to PC and BOX
5. Push button in AV
6 I shut pins 7/8 and 1/2 nothing happend so i shunt step by step all pins and nothing happend too ;/
So maybe its fully bricked and unbrickable? Or u have maybe some ideas, yet? Becose i don't have any :C
I watched all tutorial movies, read all forums, googles, etc.

---

Test here https://yadi.sk/i/8mQwqj9s3TrgBe
Envoyé de mon PRA-LX1 en utilisant Tapatalk
---------- Post added at 01:05 PM ---------- Previous post was at 01:01 PM ----------
Push the button av and hold it at the same time as the shunt
Envoyé de mon PRA-LX1 en utilisant Tapatalk
---------- Post added at 01:18 PM ---------- Previous post was at 01:05 PM ----------
I do not think the box is HS but just write protection. Just find the right shunt.the default has to 2% corresponds to a memory error (ddr3 or ddr4 or frequency ...) error has to 4% bad bootloader or and uboot (p212, p201, p281 ...), error a 7% power problem (jack connection). In the first two cases IS not the good rom.
Envoyé de mon PRA-LX1 en utilisant Tapatalk

---

carribou60 said:
Test here https://yadi.sk/i/8mQwqj9s3TrgBe
Click to expand...
Click to collapse
Doesn't work
Nand from closer distance:
Nand from closer distance (letters in paint):

---

try to boot h3droid / h3ii
Hi there,
i have almost the same problem with my MXQ-Pro 4K S905W.
I have also tryed all Tools/USB/SD/Versions/MSWin etc. nothing works, the different PCs found the Box as "Unknown USB-Device".
Sinds i tryed to boot "h3droid" from SD what works fine (I know its not for that kind box) the HardWareinformation on the Driver is changed to "USB Device(VID_1f3a_PID_efe8) / with an driversignature from Allwinner Technology Co.,Ltd"
I know thats not right, but now its not more black screen on boot no it hang on bootlogo.
Now i´am searching for something like the PowerOn-h3droid-SD-installer just for AMLogic images.
If someone could help to create some PowerOn-Autoboot-SD-Card files like the h3droid used for AMLogic chips i would be happy.
my Box info:
- Sticker down under the Box -
## S/N:HSO0524MA 2+16
## MAC : C42AFE704068
- Sticker on SD-Slot
## SWE20180503004
## MXQ-S ZXD180514
## H3-D3-1G8G-XR819
## 7.0-N0001-20180511
- Print on Mainboard
## MXQ-S-V3.0
## 2018-04-26
Processor : Amlogic S905W A53 Quad-core / Wlan : Allwinner XR819