Help with Huawei Mate 10 FRP Blocked - Huawei Mate 10 Questions & Answers

Greetings family I hope you are having an excellent day. I commented update my mobile by repack to the beta of EMUI 9. Following this I left the bootloader unlocked and I see the typical orange letters every time you rebooted the phone, for me it is a bit annoying, so I decided to return to EMUI 8 since repack, now I'm finding that the pc only recognizes my mobile in fastboot, but when it's time to put it in recovery mode it does not recognize me, I already tried applying the patch for Windows 10 in the registry editor, I already tried changing PC and nothing, reading on the Internet I found that I have the FRP blocked and that I can not make any modification that is to say (use fastboot, 3rd programs to modify the system, update etc). If someone has experienced something similar and if they have found a solution, I would greatly appreciate it. regards.

maybe u can try dload with correct full firmware suit for ur mode,and maybe u will lost ur data and bootloader will be relock

salland said:
maybe u can try dload with correct full firmware suit for ur mode,and maybe u will lost ur data and bootloader will be relock
Click to expand...
Click to collapse
Hi, thanks for your time, you could recommend a tutorial, to do what you tell me. Thank you!

enrique/rz said:
Hi, thanks for your time, you could recommend a tutorial, to do what you tell me. Thank you!
Click to expand...
Click to collapse
1.make sure if ur bootloader is unlock
2.if ur bootloader is unlock ,flash twrp
3. and then use the tools hurupdate which u can find in xda
sorry for late reply

Related

[Q] Phone locked after too many pattern attempts.

Hi Guys,
i need help to solve this unlock problem for my bother phone.
Below are attempts i tried but fail.
1. tried to use null as password, result fail
2. use pc companion to repair, at the last page suppose to have install button but only finish button, no install button.
3. tried sony erricson update software, download the lastest version, the software check for phone software version but the phone have the latest software so cannot update. found previous version of software update but when i run the software it check for the software update version and the software update itself first, again fails.
all the above solutions i found while try to find how to unlock the phone.
so guys out there who can help me, your help is appreciated.
thanks
Actually the pattern lock will attemp for 30 seconds for each 5 times wrong pattern..but if you forget with the pattern..you can choose to Answer Secret Question or Input Google Account Detail to UnLock and Clear the Password..
Shadows.X10i said:
Actually the pattern lock will attemp for 30 seconds for each 5 times wrong pattern..but if you forget with the pattern..you can choose to Answer Secret Question or Input Google Account Detail to UnLock and Clear the Password..
Click to expand...
Click to collapse
because too many attempts, the phone asked for google username and password, knowing my brother he forgot the username and password so now i stuck, is there any way to hard reset by pressing combination button like others pda?
abima80 said:
because too many attempts, the phone asked for google username and password, knowing my brother he forgot the username and password so now i stuck, is there any way to hard reset by pressing combination button like others pda?
Click to expand...
Click to collapse
is ur phone rooted ?
If yes, recovery installed?
if yes, reinstall ur fav ROM.
Follow the dev's instruction (means clean wipe) and this is a less trouble methode.
And for re install, use the flash tool...
http://forum.xda-developers.com/showthread.php?t=928343
good luck
Id reflash my phone
Sent from my X10i using xda premium
runaway_bunny said:
is ur phone rooted ?
If yes, recovery installed?
if yes, reinstall ur fav ROM.
Follow the dev's instruction (means clean wipe) and this is a less trouble methode.
And for re install, use the flash tool...
http://forum.xda-developers.com/showthread.php?t=928343
good luck
Click to expand...
Click to collapse
The phone new, I dont think its rooted.
So its no for your 1st question n the rest of d questions hehe..
Can flash tool be install even the phone lock?
Sent from my HTC using XDA App
Yes You can..even your friend's X10 phone can be flash easily..coz flashing phone can be done without any password isn't it..he_he..
abima80 said:
The phone new, I dont think its rooted.
So its no for your 1st question n the rest of d questions hehe..
Can flash tool be install even the phone lock?
Sent from my HTC using XDA App
Click to expand...
Click to collapse
Ok buddy, The flashtool is a tool which u need to install in your PC.
Also download the 2.1 firmware from below link
http://www.mediafire.com/?sqv6274anzfzn2x
Now u will get a .ftf file, place this file in ur firmware folder of the flashtool
now, open the flash tool and click on flash.
You will see the 2.1 firmware version.
Now take out the battery from ur phone, connect ur USB cable first to ur PC and then to ur phone (battery still not inserted).
Now press the back button (dont release it) and insert the phone's battery.
U should be seeing the green LED and now watch the flash tool window...
Follow the instructions in the flashtool window.
Remember, this is just to install the 2.1 firmware
Once its installed, u can root ur phone and install xrecovery, (if u feel u need a root).
Hope this helps.
PM me if any help required....
Mmmm heard this all before who does the phone belong to
Sent from my X10i using XDA Premium App
runaway_bunny said:
Ok buddy, The flashtool is a tool which u need to install in your PC.
Also download the 2.1 firmware from below link
http://www.mediafire.com/?sqv6274anzfzn2x
Now u will get a .ftf file, place this file in ur firmware folder of the flashtool
now, open the flash tool and click on flash.
You will see the 2.1 firmware version.
Now take out the battery from ur phone, connect ur USB cable first to ur PC and then to ur phone (battery still not inserted).
Now press the back button (dont release it) and insert the phone's battery.
U should be seeing the green LED and now watch the flash tool window...
Follow the instructions in the flashtool window.
Remember, this is just to install the 2.1 firmware
Once its installed, u can root ur phone and install xrecovery, (if u feel u need a root).
Hope this helps.
PM me if any help required....
Click to expand...
Click to collapse
Dude, successfully reflash back d phone, thanks for the instructions, well I dont think my bro need it rooted.
This is d first time I try to flash phone other than htc phone. Thanks again.
Sent from my HTC using XDA App
abima80 said:
Dude, successfully reflash back d phone, thanks for the instructions, well I dont think my bro need it rooted.
This is d first time I try to flash phone other than htc phone. Thanks again.
Sent from my HTC using XDA App
Click to expand...
Click to collapse
Anytime...
I guess its not our place to question things like these but I knew someone who literally stole a phone and flashed it over because he was a techy and had the "know how"
its just ridiculous that you would forgot the pattern lock, the secret question and the google account info...
oh well... we can only hope that this was not a stolen phone
scattaman said:
I guess its not our place to question things like these but I knew someone who literally stole a phone and flashed it over because he was a techy and had the "know how"
its just ridiculous that you would forgot the pattern lock, the secret question and the google account info...
oh well... we can only hope that this was not a stolen phone
Click to expand...
Click to collapse
Well said !
scattaman said:
I guess its not our place to question things like these but I knew someone who literally stole a phone and flashed it over because he was a techy and had the "know how"
its just ridiculous that you would forgot the pattern lock, the secret question and the google account info...
oh well... we can only hope that this was not a stolen phone
Click to expand...
Click to collapse
+1
All sounds too convenient to me.
- X10a Wx v4 ~ via XDA App
scattaman said:
I guess its not our place to question things like these but I knew someone who literally stole a phone and flashed it over because he was a techy and had the "know how"
its just ridiculous that you would forgot the pattern lock, the secret question and the google account info...
oh well... we can only hope that this was not a stolen phone
Click to expand...
Click to collapse
Then you should read again my first post n try to understand what is the problem.
Sent from my HTC using XDA App

[Q] plz help me!!!

i have updated my lumina 710 but it was disconnect usb while updating..now i power up the phone it's nothing happen
i found this thread on google: http://forum.xda-developers.com/showthread.php?t=1639565
can this save my phone if there any solution please help me !!
mrvaio said:
i have updated my lumina 710 but it was disconnect usb while updating..now i power up the phone it's nothing happen
i found this thread on google: http://forum.xda-developers.com/showthread.php?t=1639565
can this save my phone if there any solution please help me !!
Click to expand...
Click to collapse
Hi,
If you used "Nokia Care Suite" or "Zune" then you NO NEED TO WORRY as it most likely can be recover.
But if you use partition related apps such as "dd" then it might able to recover.
Need more details & which app did you use to upgrade.
Hi, thank for replying
Yes, I used ubuntu to flash. In ubuntu it's still recognize my 9 partions and i'm having Qualcomm bootloader. The rom i flashed is Rainbowmod. Now what must i do :|
Thanks in advance.
mrvaio said:
Hi, thank for replying
Yes, I used ubuntu to flash. In ubuntu it's still recognize my 9 partions and i'm having Qualcomm bootloader. The rom i flashed is Rainbowmod. Now what must i do :|
Thanks in advance.
Click to expand...
Click to collapse
Oh, ok..
It's good that you still can see all ur partitions.
What was the cause that stop/disconnect while updating ?
Have you backup any of ur partitions ?
If so, try restore your backup.
If not try flash with another custom fw.
Ok thank you very much for helping
I flashed with V7 metro again and now it has lived again.... I'm very happy! Thanks

Urgent help needed: Sm-g360az bricked

Hello....i rooted my sm-g360az samsung phone and when i restarted the phone, it didn't boot up to the home screen. It shows the samsung logo and then becomes blank....i later on came to know on the internet that i hadnt enabled 'oem unlock' on 'developer options' before rooting. I sent the phone to samsung for repair and they sent it back to me today saying that the phone is beyond repair because it was rooted, though i hadnt mentioned to them that i had rooted the phone. How do i get my phone to work again? I need it very badly for work purposes. Can somebody help me with this....
You need to flash stock rom for your device via odin.
røbin said:
you need to flash stock rom for your device via odin.
Click to expand...
Click to collapse
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
alvcross said:
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
Click to expand...
Click to collapse
It is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 Did you visited this page?
røbin said:
it is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 did you visited this page?
Click to expand...
Click to collapse
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
alvcross said:
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-G361F/ both device have same spec.So you can try this version.
røbin said:
https://samsung-firmware.org/model/sm-g361f/ both device have same spec.so you can try this version.
Click to expand...
Click to collapse
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
alvcross said:
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
Click to expand...
Click to collapse
Can't 100% guarantee you that it will work or not.Both device have same spec so it should work but one have 2mp font camera and other have 1.9mp camera. It shouldn't be a big problem I think.
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
alvcross said:
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
Click to expand...
Click to collapse
All the version are same.Those files are from different region. So you can choose any region.but download lte version only.
røbin said:
all the version are same.those files are from different region. So you can choose any region.but download lte version only.
Click to expand...
Click to collapse
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
alvcross said:
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
Click to expand...
Click to collapse
Don't just say thanks.Hit the thanks button If you thik I helped you
røbin said:
don't just say thanks.hit the thanks button if you thik i helped you
Click to expand...
Click to collapse
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
alvcross said:
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
Click to expand...
Click to collapse
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Røbin said:
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Click to expand...
Click to collapse
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
alvcross said:
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
Click to expand...
Click to collapse
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Røbin said:
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Click to expand...
Click to collapse
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
alvcross said:
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
Click to expand...
Click to collapse
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Røbin said:
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Click to expand...
Click to collapse
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
alvcross said:
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
Click to expand...
Click to collapse
Why do you need stock recovery?There's no stock recovery available for your device.Try to instell different twrp version for your phone.

Help me help you getting back your recovery/bootloader, i may have found a way.

Hi,
I think i found a way to unlock the boot-loader. So to get started I need to get some before images and this is where you guys come in.
This little project has three stages:
1. Submitting before images (risk free)
2. Some work on my part confirming if my findings are correct and writing some code.
3. Testing my code, it has risk but i can estimate this after i have completed stages 1 and 2.
And you deciding if you're willing to risk running it. ( you are not obligated to run this if you sign up )
I need about 4 / 5 volunteers.
** PREREQUISITES for signing up **
1. Your device boots into FlymeOS
2. You have root access in FlymeOS
3. You have a locked bootloader
4. You have fastboot and adb properly installed
Sign up here, i will send you a pm with the details :fingers-crossed:
I have my phone correctly, but i'm interesting how you will try make it.
Please
fill up all the requirements, please i need your help !!!
DcSok said:
I have my phone correctly, but i'm interesting how you will try make it.
Click to expand...
Click to collapse
Just sent you the details.
choche.eldemarras said:
fill up all the requirements, please i need your help !!!
Click to expand...
Click to collapse
You are not the only one, read post 1, all prerequisites are stated. You do not have to have a working recovery to sign up :good:
not recovery
I have no recovery, root and I'm locked bootloader
Pogress report
Hi,
Still working on phase one, progress halted (need 2/3 people)
Phase 2 is almost 95% done: fingers-crossed:
It seems everybody is waiting for something to happen and thats not going to work without a couple of volunteers.
Also I need someone with an >> unlocked,rooted << phone, to post a simple log. no risk involved at all. So i can verify the unlock status to my own.
Please sign up people, otherwise were just reading posts how this project is not moving along.
Thanks
st0rm77 said:
Hi,
Still working on phase one, progress halted (need 2/3 people)
Phase 2 is almost 95% done: fingers-crossed:
It seems everybody is waiting for something to happen and thats not going to work without a couple of volunteers.
Also I need someone with an >> unlocked,rooted << phone, to post a simple log. no risk involved at all. So i can verify the unlock status to my own.
Thanks
Click to expand...
Click to collapse
Hi! Can help. Flyme os, root, locked bootloader, adb works
Sylph4 said:
Hi! Can help. Flyme os, root, locked bootloader, adb works
Click to expand...
Click to collapse
Just sent you the details.
st0rm77 said:
Hi,
Also I need someone with an >> unlocked,rooted << phone, to post a simple log. no risk involved at all. So i can verify the unlock status to my own.
Thanks
Click to expand...
Click to collapse
Flyme 5.6.9.21G beta. >> unlocked, rooted << Can I help?
Cat In Boots said:
Flyme 5.6.9.21G beta. >> unlocked, rooted << Can I help?
Click to expand...
Click to collapse
Just sent you the details.
I have some bad news, i just got some logs that shattered my hypothesis ... which is a shame. I cannot find certain markers that i thought were responsible for the unlock process. This doesn't mean the search is over, its just that i have to start again from scratch
Sorry people, i wish i had better news
st0rm77
come bro, why u have to say sorry?
u are the very least ppl who has the skill and willing to spend time on this, so please accept my grateful thanks for trying.
my pro5 lost the recovery but I'm lucky that living in hk, so i can go to mainland Meizu service center and they helped me reflash for free.
now i unlocked my phone and flashed twrp, but i don't dare flash any update.zip by touching the recovery inside.
with your expertise, could you suggest how can we flash the official update.zip to get the latest update, but still keep the twrp?
maybe u can't save the ruined phone (yet), but at least u may draft some guide to prevent idiots (like me) to brick their lovely Pro 5 by doing something stupid.
thanks again for ur time in digging into this.
mee too..i've lost the recovery ...
Restoring Meizu pro 5
Help me in my brick Meizu pro 5 / Can I throw your way to restore ???:плач:
rickylcp said:
could you suggest how can we flash the official update.zip to get the latest update, but still keep the twrp?.
Click to expand...
Click to collapse
If you have unlocked bootloader this is easy :
- Open update.zip (with 7zip for example)
- Erase "recovery.img" and "bootloader" files...
- Save update.zip
- Flash with twrp
Other method
naboleo said:
If you have unlocked bootloader this is easy :
- Open update.zip (with 7zip for example)
- Erase "recovery.img" and "bootloader" files...
- Save update.zip
- Flash with twrp
Click to expand...
Click to collapse
1. Flash original update.zip with TWRP
2. Flash bl_unlocked.zip with TWRP https://mega.nz/#!rEZgBAxL!BxU2a_cGb6ololRIc5TdGcH98nGbqKAsRxVADpYtDIk
3. Flash TWRP_3.0_m86.zip with TWRP
https://mega.nz/#!ico2nKga!ClDoRroNlGdet33zra0WDqh9LTXwq0BB3pZKfutlxpk
You have to do 3 flashes in the same TWRP session. DON'T reboot your phone before flasing the 3 zip files.
my bootloader is locked, what must i do
me too I've lost recovery...locked and rooted...fastboot works.
Please help me to install again recovery!!!
Thanks
Hi! I was kild recovery, my phone work on Flymeos 6.7.3.3G. Is there any hope of unlocking the bootloader and repairing it?
helpme!

Original Rom and Bootloader help

Hello,
i have searched a lot and havent found the way to lock back again the bootloader and install the original OnePlus X Software. I have rooted my device 2 Years ago and installed cm 13.0 nightly and forgot the way i did it. I want to give the Mobile to someone else and want it in the original form.
I hope you can help me
Mn145 said:
Hello,
i have searched a lot and havent found the way to lock back again the bootloader and install the original OnePlus X Software. I have rooted my device 2 Years ago and installed cm 13.0 nightly and forgot the way i did it. I want to give the Mobile to someone else and want it in the original form.
I hope you can help me
Click to expand...
Click to collapse
Download OxygenOS recovery from here: http://oxygenos.oneplus.net.s3.amazonaws.com/OPX_MM_recovery.img
Download the original ROM from here: http://s3.amazonaws.com/oxygenos.on...OTA_019_all_201611071506_03f73e21449d4d31.zip
Factory reset using TWRP.
Flash official OxygenOS recovery using fastboot commands
Adb sideload the Original ROM
Boot
On booting, skip through setup, go to developer options in settings menu and switch off "Allow OEM unlocking"
Factory reset the phone again.
Now the phone is ready for selling/giving
Thank you for your help, i have now another Problem.
I tried it to update my TWRP with the App in the Playstore. After i tried to get into the bootloader, but my devices was just stuck in the loading screen, where u only can see the 1+ Logo. Then i went to connect my mobile with my Computer and tried with the ADB. After "fastboot oem unlock" my device just went into the same Logo screen. After waiting 20 Minutes i turned off the Phone and restartet it. Now i am stuck in the Loading screen. I cant even find my device in ADB. Can anybody please help me.
I have solved my Problem and installed the OxygenOs. But i did it via Bootloader and not with fastboot commands. Can u now tell me how should i sideload the Original Rom ?
Thank again for your Help. I finally solved my Problem. Cheers
Mn145 said:
Thank again for your Help. I finally solved my Problem. Cheers
Click to expand...
Click to collapse
Glad to have helped in a way. Next time, please use the reply button to reply to anyone's reply on your thread. We do not get any notification that you have replied. If you use the reply button and quote us, then we get an email telling us and we'll be able to promptly help you.
aryan.arora180 said:
Glad to have helped in a way. Next time, please use the reply button to reply to anyone's reply on your thread. We do not get any notification that you have replied. If you use the reply button and quote us, then we get an email telling us and we'll be able to promptly help you.
Click to expand...
Click to collapse
I am new here and i didnt know. But still thanks for your help .
Mn145 said:
I am new here and i didnt know. But still thanks for your help .
Click to expand...
Click to collapse
Sure np
Hi, I had a video introduction to reload the original rom. I would be glad if you help. Thank you
kemal20 said:
Hi, I had a video introduction to reload the original rom. I would be glad if you help. Thank you
Click to expand...
Click to collapse
What help u need?

Categories

Resources