Related
I've got a *very* small scratch on the screen but it's noticeable when the device is tilted. I was wondering if there are any products out there that'll remove the scratch EVEN IF it takes away from the "touchability" of the screen. Is there anything out there that'll help me?
Im gonna say no but im not for sure on that but to buff out the screen will probably ruin it. Screen protectors are a great invention lol.
You may be able to put some kind of filler in it? but thay would be risky and probably void your warranty.
sovrce said:
I've got a *very* small scratch on the screen but it's noticeable when the device is tilted. I was wondering if there are any products out there that'll remove the scratch EVEN IF it takes away from the "touchability" of the screen. Is there anything out there that'll help me?
Click to expand...
Click to collapse
You could try Displex, but I doubt that would work at this point. Pay the $50 insurance when the next issue arises and get a new one.
I would suggest a auto paint shop as a very fine cutting compond will do this, BE AWARE THIS WILL MORE THAN LIKLY STOP YOU TOUCHSCREEN WORKING
You might try this
When Palms first came out there were no screen protectors. What we use to do is use a high quality acrylic floor wax. Have not used it in years but I would guess it still works.
for those of you who like to drop your phone in the toilet:
Completely submerged phone in water
http://www.youtube.com/watch?feature=player_embedded&v=7Ama47RGdL4
http://www.youtube.com/watch?feature=player_embedded&v=Ln0daAowdJI
Only a few devices are supported now but as they get started I'm sure they'll include more phones...this thing is amazing, I would pay to have my phone water proofed for around 60 dollars is what is listed on their site.
www.liquipel.com
http://www.liquipel.com/liquipel/
wish they had it for our phones, hopefully soon , wonder if i can call them and see if they can do our phone!!!
I was gonna send my mytouch 4g to them, but then I got the Amaze... now I gotta wait... One thing that's good is that I have a backup phone once I send my phone to them.
I just don't see how that's possible if they don't cover the ports that give access to the inside of the phone.
Considering our ports on our phone lead right into our battery cover and all of our internal components.
nguyendqh said:
I just don't see how that's possible if they don't cover the ports that give access to the inside of the phone.
Considering our ports on our phone lead right into our battery cover and all of our internal components.
Click to expand...
Click to collapse
nano technology, gets everywhere in the phone....1/1000 as thick as human hair.
seansk said:
nano technology, gets everywhere in the phone....1/1000 as thick as human hair.
Click to expand...
Click to collapse
What do you think though? Legit? Doable?
Guess we won't know til we can test it. Lol.
nguyendqh said:
What do you think though? Legit? Doable?
Guess we won't know til we can test it. Lol.
Click to expand...
Click to collapse
its legit, but I don't know if they'll do our phones yet, there's only a small list, iphone a a bunch of HTC's like evo, but not our phone yet, if we call them maybe they'll do it...I don't see why not.
This technology has been in the works for a while. I remember reading about it and seeing videos of it in action a while back, like at least 5 years ago. I'm super excited to see that it's finally coming around!
It's basically a spray, or a vapor, or a liquid itself, that they spray on or dunk the electronics in. It coats literally EVERYTHING inside it. Imagine dipping your phone in thick paint and letting it dry. Same concept but this is a nano thin layer of a clear substance that repels water. Amazing stuff.
I'm definitely going to give it a shot if their site ever loads and I can find out how much it costs. Haha
danielelias said:
This technology has been in the works for a while. I remember reading about it and seeing videos of it in action a while back, like at least 5 years ago. I'm super excited to see that it's finally coming around!
It's basically a spray, or a vapor, or a liquid itself, that they spray on or dunk the electronics in. It coats literally EVERYTHING inside it. Imagine dipping your phone in thick paint and letting it dry. Same concept but this is a nano thin layer of a clear substance that repels water. Amazing stuff.
I'm definitely going to give it a shot if their site ever loads and I can find out how much it costs. Haha
Click to expand...
Click to collapse
costs 60 dollars, but they don't list amaze as one of the phones they support, I'm going to call them right now see if they can do it.
seems cool. waiting for the amaze to be one day available
I have seen some other companies doing the same thing, except with car windshields. It's like a high-tech rainex. Very cool, didnt thing it would be out for phones this soon, but that's incredible! I wonder if you will be able to remove the housing on your phone after it get's sprayed with this stuff, and it still be waterproof upon putting it back together. like nguy said earlier it has to seal off the ports, and dis-assembling it would definitely break this seal.
youngunner-2 said:
I have seen some other companies doing the same thing, except with car windshields. It's like a high-tech rainex. Very cool, didnt thing it would be out for phones this soon, but that's incredible! I wonder if you will be able to remove the housing on your phone after it get's sprayed with this stuff, and it still be waterproof upon putting it back together. like nguy said earlier it has to seal off the ports, and dis-assembling it would definitely break this seal.
Click to expand...
Click to collapse
Yes you can, they did this with and HTC device and there's a video of it on their website on the bottom. you can take off the back, the battery, heck you can dissasseble put it in water and put it back, IT WILL STILL WORK. This nano spray goes into every SINGLE CREVICE OF YOUR PHONE. it is nano technology!!
Sound or heating issues ?
xManMythLegend said:
Sound or heating issues ?
Click to expand...
Click to collapse
This does not affect the phone in any way...its nano...search nano and see how small it is, 1 nanometer = 1.0 × 10-6 millimeters, its at least 1 millionth of a millimeter or smaller... you can see on a ruller how big a millimeter is. does that answer your questions, if won't affect anything, just repel water. if it doesn't affect the conductance between the battery and the phone, it really wont' affect anything else...but call and ask them, i'm sure you'll get the same answer
another video
http://www.youtube.com/watch?feature=player_embedded&v=7Ama47RGdL4
I am guessing that all this does is protect the electronic components from shorting out or corroding if they are exposed to liquids. I also assume that if you submerge the phone, it will still sink and fill with water and you will still get water under the screen and have to dry it out, etc.
Finally, and I didn't read their web site, but does the process void the warranty?
I watched a couple videos on this tested on the iphone and thunderbolt and it did work. i wouldnt want to test it unless i had a backup or something. it would be safe to have just cause though
tedya said:
I am guessing that all this does is protect the electronic components from shorting out or corroding if they are exposed to liquids. I also assume that if you submerge the phone, it will still sink and fill with water and you will still get water under the screen and have to dry it out, etc.
Finally, and I didn't read their web site, but does the process void the warranty?
Click to expand...
Click to collapse
what does this have to do with warranty? how would HTC know?
seansk said:
what does this have to do with warranty? how would HTC know?
Click to expand...
Click to collapse
I asked about the warranty because I had not seen the video on how this is applied to the phone. I have since seen that. So, if that is how it is applied, every phone should be supported soon.
Believe me, I am the same way; How would HTC know? I guess I am just not convinced that the $60 application is worth it. With any phone, i see it as paying $60 for this application, something other than water damage occurs and I get the phone replaced. If I understand this right, now I have to get this application done again for another $60 because my replacement is a different phone.
If not already, this company should be selling their technology to the OEM. I think the Moto Droid Razr already has this or something similar.
I know many of you will disagree, but this is just plain "gimmicky". I would only consider this if I didn't pay for monthly insurance. I am 10x more likely to drop and break the phone than I am to get water damage. I think most people are.
According to their own terms of use, they only warrant/guarantee that they will apply the coating, not that it will work.
Does anyone reading here work at a cell phone store who can say what the most common reason for a replacement is? I'd be curious.
Had a small hairline crack across the screen.
So I purchased a replacement glass,
watched several youtube videos on how to change the glass (phone was working perfectly)
came off no problem, very easy as a matter of fact.
replaced with new glass.
phone turns on, nothing goes on the screen.
what happened? did I ruin the digitizer?
never touched it with the razor knife one time but it did have a few flakes of glass on it so I lightly brushed them off with a hairless cloth.
what I do????
****.
it turns on and if I call it, it rings but dead screen.
how did I kill it?
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Why did YOU fixed it yourself?
Anyway, check if all something is not connected...
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
I'm not an expert but if it turned on before but now it doesn't, its dead jim. You probably heated it up too much. I think the suggested heat is 170-180 F.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
my second post. " IT TURNS ON but the screen does not."
I can call it and it will ring BUT THE SCREEN DOES NOT TURN ON!!!!
The screen is probably dead but I am hoping someone who knows about it can give me advice on how to maybe fix it.
that is the help I am looking for!
I believe only way to fix "it" at this point is to buy a new lcd which at this point youre better off buying one with the lcd-digi-glass. I say this because if there was a chance at slightly fixing a bad LCD it would involve hard work with tools beyond your reach and or experience.
Edit: Just out of curiosity, did you disconnect the LCD screen during the disassemble? Make sure its connected properly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pblocal said:
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
Click to expand...
Click to collapse
Oi! Don't get snappy!
He was trying to help you!
Little sh*ts like you should get banned!
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
BHARGAV33 said:
Anyway, check if all something is not connected...
Click to expand...
Click to collapse
pblocal said:
that is the response I get? seriously?
Click to expand...
Click to collapse
Seems fairly sensible question to ask, especially when your providing so few details. When you checked the screen immediately after connecting it up did it work? If so it's entirely possible one of the connectors has worked loose during re-assembly, if not it's always possible that the new screen was supplied faulty.
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
pblocal said:
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
Click to expand...
Click to collapse
Right. Now that is much better. If you would have asked like this from the beginning, we would have helped you.
Now, I personally haven't done this before, but what did you heat the phone up with?
It's possible that you have de-soldered some contacts for the screen's ribbon cable. If you have done that, you may want to open up the phone and check. If that is the case, I'd send it to Samsung or a repair centre. Of course, you'll get the same questions as here, but they should be able to help you. You could always send it to http://mobiletechvideos.com and check if they can do things like that for you, after all, they are a universal repair service.
I hope this helps you a little bit.
Oh, and don't say thanks, click it (Each and every answer. Even mine!)
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
pblocal said:
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Click to expand...
Click to collapse
Oh. By the way: bumping posts is against the community rules - It counts as spam. Next time I will report the post immediately.
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
pblocal said:
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
Click to expand...
Click to collapse
I'm glad you and the search engine have met
Yeah, that would explain a lot. I actually feel sorry for you, man. Good luck with getting that fixed!
yeah, the funny thing is, I searched all over google and did not think about searching here.
Why? I have no freaking clue. Just plain stupid of me.
I already sent an email request to mobiletechvideo.com. I hope they can fix it, if I send it to them.
Thanks for your helpful advice. This is what I was looking for.
(oh, and the repeat of the same statement from yesterday was not for a bump, it was a mistake. I did not see it so I posted it again. if you look it was only 5 minutes apart)
once again, thanks, I also hit your "thank you" meter!
pblocal said:
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Click to expand...
Click to collapse
that's not true though, it's just very difficult
Curious how everyone else's phones have been holding up so far. The back of my phone is covered in little specks, which appear to be from pitting and minor surface scratches. It's very disappointing since I've had my phone permanently in a case since I've had it. I'm wondering if the metal is just so soft that little vibrations while in the case is causing marks.
I'm hoping there's a way I can get them out but seeing as it has a brushed finish, I don't see it being all that easy.
That's indeed pretty surprising (marks with a case on). I would think the only way this would be possible, is if there was some grit or sand between the case and the device. If this were in fact true, I can see it rubbing on the finish over time (as others here have also mentioned). Even so, the scratches would probably just be in isolated areas, not for the back to be covered in scratches, unless there was grit captured everywhere inside the case. Which is very unlikely, as you would have noticed that.
The other possibility is scratches from a hard plastic case (you haven't mentioned what kind you have). Again, this is something that some folks on here have observed. But folks have mentioned scratches in a few isolated locations (like the edges) not covering the back.
I have had a cheap soft TPU case on my M8 for a month and a half, and not a single visible scratch on the back, that I can find.
The dirt/sand certainly makes sense. But I've repeatedly taken out the case and cleaned it, and it appears like I'm getting more of these. The case, is a soft tpu clear case.
Further, I only rarely use this case once a day for an hour when I go to the gym. The rest of the time my phone sits in my leather pouch, which I KNOW there's no way that's scratching it.
It certainly shouldn't be getting marked up like this from such careful use. I'll try to post pics later.
Sorry for the linked images. You can download them to see full size. It's very difficult to capture up close. But you can see the specks all ordier the phone.
Sent from my HTC One_M8 using XDA Free mobile app
Anyone? I'm wondering if there's a defect in my casing and if I should ask for a new one or not. Combined with my letters falling out my resale value is definitely going to hurt by this.
Sent from my HTC One_M8 using XDA Free mobile app
Haven's seen anyone else complain about this. Its especially weird, since you have a case on the phone. I can only guess the finish is delaminating or falling off, regardless if any external wear/contact is present or not.
I'd say its a warranty issue, between this and the letters coming off. But you won't get a new one. AT&T's policy is that you get a refurb after 14 days of purchase. And I've heard mixed reports on the refurbs (on past devices). Some are indistinguishable from new; while others are beat up, or may even have some hardware issues that weren't fixed properly.
A refurb is exactly what I'm afraid of. I don't want to trade in a phone with cosmetic issues for one with potentially worse issues. Any way of getting them to send a new one? AT&T has been nothing short of great for me in the past but Idk about getting a new phone replacement.
Sent from my HTC One_M8 using XDA Free mobile app
cgibsong002 said:
Any way of getting them to send a new one? AT&T has been nothing short of great for me in the past but Idk about getting a new phone replacement.
Click to expand...
Click to collapse
Its not in their policy. But you can always ask . . . than complain, kick and scream, etc.
Its also not in their policy to let folks switch to another brand/model. But I've seen that happen when folks complain enough. Highlight how long you've been a customer, if you have multiple lines, etc. Not sure if they have ever sent out brand new phones for warranty claims. But it sure doesn't hurt to try.
Just thought I'd add, I'm having the exact same issue with the Google Play Edition in a clear TPU case too! Were you using a Spigen case by any chance?
evandunkel said:
Just thought I'd add, I'm having the exact same issue with the Google Play Edition in a clear TPU case too! Were you using a Spigen case by any chance?
Click to expand...
Click to collapse
Wow, strange, mine too, exact same case. I took the case off the other day to clean it, it was looking nasty, and sure enough there was like some kind of grit in there. I bet that's what's doing it. Of course that's the least of my worries, it fell out of my pocket and I ran this thing over with my tractor, and crushed the side so far that I had to pry out the volume buttons, they were stuck, lol, had tire marks across the screen even. This thing is a tough phone!
hack14u said:
Wow, strange, mine too, exact same case. I took the case off the other day to clean it, it was looking nasty, and sure enough there was like some kind of grit in there. I bet that's what's doing it. Of course that's the least of my worries, it fell out of my pocket and I ran this thing over with my tractor, and crushed the side so far that I had to pry out the volume buttons, they were stuck, lol, had tire marks across the screen even. This thing is a tough phone!
Click to expand...
Click to collapse
Haha, very nice. Good to hear it'll survive a tractor lol. I feel like I should leave a review on that case. It seems to be flawed if it's allowing grit in. I'd consider my use quite typical, not near any sand or dirt. I'm pretty sure that lost me $100 in resellability.
Yep. Kid got a hold of it before case arrived. Yes its my fault. Should have kept better eye on him. There are only two bids on YouTube. Neither one is great. I see on eBay they have LCD and digitizer and housing. From vids it looks easy. But would like to hear from anyone who has done it. Thanks
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
kimtyson said:
So sorry for the breakage. Here is a video that seems pretty good, https://www.youtube.com/watch?v=qm6NwBvo6T0. The process doesn't seem to hard, to me. Good luck.
Click to expand...
Click to collapse
I recently replaced the LCD screen on a OnePlus One, other than the size, it was almost identical to the Mate2. couple parts in different spots but it had enough of those #%(@!)% rice grain size screws that I put them on a magnet, to make sure I didn't lose them.
Yes. That is one of the vids I was talking about. The other one was actually for a mate. Not mate 2. The thing I don't understand on this video is he never actually gets to the part of the screen replacement. So, I am presuming that with this phone as long as I purchase the LCD+digitizer+frame. Then it will just be a matter of putting all the parts including board back in to it. On eBay there are choices. You can purchase just the glass or glass and digitizer or those plus what they call the frame. While on my phone. Only the outside glass is broken. I am going to buy the kit that has all three. I would give just replacing the glass a shot if I could find a video or tutorial. I have looked everywhere. Nothing. The closest thing I could find is the vid on youtube of the guy changing just the glass on his mate. Unfortunately, he never says a word in that vid. I guess it's just to show it can be done. I'm really stressed by all this. I would prefer to just change the glass if only I could find some info. I presume it is like a Samsung where glass is glued with local to digitizer. I have fixed those type on a s3 and note 2. Was not that hard. Just be sure to heat properly and don't scratch digitizer. With no idea of how it is done on this phone. I guess I will get the kit and hope for the best as of course. It has to come from China. Waiting....Thanks for the info and I will do my best to make a vid so others can learn from my mistakes? Lol or hopefully success.
Have a hair dryer or a heat gun handy just in case. On the OnePlus, the screen is "glued" somewhat, to the plastic frame. It is a LOT easier to separate if you heat is up a
bit. Just heat one side, then you the (as I like to call it) guitar pick tool to start to pry it up, then to a little more at a time, so you don't overheat the broken screen.
After you get the screen off, make sure you scrape around the edges of the frame, to ensure you remove any sticky residue. You don't need to heat up the new screen. Once you press it down, it will stick quite well.
If it were me I would get the entire kit and be done with it. There is too much that can go wrong with the hairdryer and peeling the old, broken screen from the digitizer. With the kit, it's just all screws and dismantling then put it back together. Much easier.
I hope that is right about the kit. The thing that scares me is what will the quality of the parts be like? I know my digitizer is fine. So I'm going to try the kit first. If it fails due to bad parts. Then I will still have the option of just doing the glass. The cheapest I saw for the glass was 18.00 bucks. The kit with shipping was 58.00....Not really a huge difference. Again its the quality of the parts that scares me. Of course the vid on youtube makes it look easy. But I'm sure he is doing it on a phone that has been torn down a few times. Its always easier then. As I said. I intend to video all this. If nothing else. There will at least be more info available to poor suckers like me..lol. Will see in a couple weeks if the Chinese ship time holds true...
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
One other thing. Just wanted to ask. You say the one plus is about the same? Are you saying that because there similar in how their made? Or do you know something about where their made. Thanks for the info on the glass. I have done it on Sammy phones. Has to be similar. Kit is already coming. So I'll go that route first try. Wish your repair had been on a ham2. Then I would feel better. I guess I get to go first. Lol
kimtyson said:
I'd bet the quality is the same as OEM.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
The one I ordered for the OPO looked identical, except the routing for the lcd screen connector was just a little different, but in no way caused a problem.
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
pckarma112 said:
I wanted to update you guys on how the repair of my screen is going. I have some info to share and trust me. It is important if you ever need to DIY on this phone. Most are aware of the video on youtube. Ive watched it several times and I always got the feeeling it looked to easy. Well, my screen and dig assy came in today. I was going through the process of tearing it down and everything was going well. Untill i got to the part where you remove the power button cable. The one that runs along the side of the phone. I SHOULD HAVE KNOWEN. In his vid. He makes it look like this cable will come off with gentle pressue. BULL****. It wont. It is glued Tight and you will just winde up tearing it. I am so pissed. I wish he would have just said to buy the cable with the kit. Its 10 bucks on ebay of course. So, now I have a torn down phone waiting for the cable. I was making a video of the repair. When the cable comes in. I will finish it and upload to youtube. The other thing he makes look easy is the removal of battery. Again, its not and you could damage it too. But I managed not to. Anyway i am really upset right now so sorry for cussing. I want to find that dude and shake his hand and smack him at same time...
Click to expand...
Click to collapse
I have worked on several phones. None are easy really. Most all companies use some type of adhesives. Alot glue the batteries in as well. Dunno if you tried it but heat seems to help with the glue. Seen a guy do it with a hair dryer. Worked for me as well with a screen replacement. Never took one of these apart so I have no idea if they use heat activated glue or not. Good luck!
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
pckarma112 said:
Well Thanks for reply. I too have fixed a few. As long as I have something to guide me. Im Cool. Vid or written indtructions. Yes all phones use some sort of glue. With this one on the cable. Heat would not have helped. You would just melt the cable. I was expecting some adhesive. But not like this. This was not meant to be reused. Period. Thats my point. I wish he would just have said buy the cable. No way it is coming off in one pc. The speaker is also glued down extremely tight. I think I got it. Its still in one pc. Interesting enough. There also on ebay.
I really just want people to know about the power cable. If you have to replace screen on this phone. Get one. Your gona need it. Now it may be middle of july by the time I get the cable. I went ahead and tore everything else out of phone. Tomorrow I will put all back into new assy. But i wont know if it worked till cable gets here. I forgot to record taking out the other pcs. I was just to stressed. But I do have some good vid for most of it. Gripe is now over. il be back when cable gets in...
Click to expand...
Click to collapse
With any luck you may save someone else a headache!
pckarma112, so sorry for your frustration. Thanks for sharing your experience.
I was going to suggest the the same thing as Moody. Heat from a hair dryer usually helps soften the glue but isn't enough to destroy anything (usually).
Just so we are all understanding, can you show a pic or provide a link of what you purchased? Was it just a screen or an assembly?
Again, sorry for your issues. Hang in there.
Parts
Yes I can. That is if I can post links. So Il try. This is the link for the power cable: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion&item=291410104104&view=all&tid=1181571120019 This I just ordered yesterday. The deleivery is anywhere from middle of July to second week of August. Im keeping my fingers crossed that I got a good vender and will get a good one. They say they have already shipped it and gave me a tracking number. But the number is not showing up yet. Ive seen this before with china stuff. I will give it a couple days and check again.>... The next one is for the screen kit: http://www.ebay.com/itm/141653108269?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT > Cant say enough good things about this vendor and kit. It looks and feels outstanding and I recieved it in two weeks from china. That is pretty darn good. Now, the only thing is since I have no power cable. I do not know for sure if I got a good one. But, like I said. It feels like a quality part. The last item is a phone repair kit that really helped with this job. The metal and plastic spudger really helped with battery and other small parts like camera and vibrator. For the price I suggest you get one. Here it is: http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As for the screw driver. Dont do what i did. I bought a cheapo 1.69$ one. It was crap. Lucky for me. I had one from a previous kit I bought and it worked fine. Hopefully these links will show up for you guys. If not I will try with a different browser.
Just so its clear. I do have a hair dryer that I keep for samsung screens. I thought about trying it on the cable. But I have worked on these kind before. There is a really fine line between warming the glue and melting the cable. This sucker had enough glue to hold the hoover damn together. Ive seen it before and Im pretty sure you would melt cable before the glue would give away. Thanks you guys for advise and just letting me vent. I do hope that anyone who attemps a repair can learn from my mistakes....lol. Thanks again.
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
pckarma112- Nice job on the post of Parts. Only problem is the first link failed. Said it was too old. Again, thanks for sharing and letting us learn from your mistakes.
Thanks for the *cough* compliments. The link is bad because seller is sold out. However, you can try this one:http://www.ebay.com/itm/111501320079?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT......If that does not work then there is this:http://www.ebay.com/itm/Black-LCD-D...412?pt=LH_DefaultDomain_0&hash=item3f3f160554 This is same only black. Again, these people really treated me well. Im sure there will be new auctions when he restocks. There are also plenty of others. Price varies a little. Im really delighted that you find small screws to be a pita. Thats just awsome. lol Keeping a piece of tape on the table really helps. Just drop them on to the tape and I promise you will never lose another one. I would really like for this thread to be helpful to anyone that gets unlucky. So, I am trying to be ernest about it all. That includes honesty with no hidden attitude. When I say thanks. I really mean it.
By the time and god willing the power cable arrives. I will hit the big 60. This will not be the last phone I ever repair( I hope). But it sure has been one of the most interesting. Thanks again guys and may your screws never be loose.
Thanks
p51d007 said:
I've been taking stuff apart and SOMETIMES successfully getting it back together for over 40 years, sometimes with the odd screw leftover, but hey, where do our extra screws come from eh?
I replaced the screen on the OnePlus for a friend a couple months ago and WOW, they need to make these screws JUST a LITTLE smaller, don't you think? I find that keeping a small magnet on hand comes in handy to keep track of those tiny a** screws.
Click to expand...
Click to collapse
Thank you. You gave me a good laugh and it was much needed today. In fact. Its needed everyday in this world. The kit of screw drivers that I own are indeed magnetized. Thank God. Seriously though. If you think these are small. Try repairing a watch. Now your talking micro. I have worked on about a dozen or so with my brother. He is a master clocksman. Makes good money still and when ever he needs help. I get to learn from him and make a little too. So, Im blessed. I also lost track of where a couple screws will go on this phone. But, got it figured out. It is nice to know that none of us are perfect. Thanks again bro.