Related
Hi!
Whenever I connect my Samsung Galaxy Win it never shows any connectivity to the computer. Even the USB debugging mode is enabled. What could be the issue?
Thank you!
Does you system has "samsung usb drivers" if not please install it and then try to connect it.
Here is the link: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-USB-Driver-for-Mobile-Phones-15270.shtml
or you can install kies
Here is the link : http://www.samsung.com/in/support/usefulsoftware/KIES/JSP
windowsvistas said:
Does you system has "samsung usb drivers" if not please install it and then try to connect it.
Here is the link:
or you can install kies
Here is the link :
Click to expand...
Click to collapse
NO! Still not connecting. Could this the reason for non-connectivity that cell phone has NO OTG support?
noman.rasheed said:
Could this the reason for non-connectivity that cell phone has NO OTG support?
Click to expand...
Click to collapse
No, it goes far than this... It's related to kernel and also to hardware
Sent from my GT-I8552B using XDA Free mobile app
freitaz said:
No, it goes far than this... It's related to kernel and also to hardware
Sent from my GT-I8552B using XDA Free mobile app
Click to expand...
Click to collapse
Will you please explain me a bit more that how can I connect my cell phone to laptop via USB cable?
noman.rasheed said:
Will you please explain me a bit more that how can I connect my cell phone to laptop via USB cable?
Click to expand...
Click to collapse
I have installed the latest USB drivers, downloaded from Samsung site. Plus, I have installed Samsung KIES to check whether I can connect the phone, but still it's not working. On the top lest of KIES, it displays Connect your phone.
Any help?
noman.rasheed said:
I have installed the latest USB drivers, downloaded from Samsung site. Plus, I have installed Samsung KIES to check whether I can connect the phone, but still it's not working. On the top lest of KIES, it displays Connect your phone.
Any help?
Click to expand...
Click to collapse
Does your phone used to connect properly beforethe problem, if the answer is yes,
Then you should reinstall ROM as it may be corrupted, i also had same problem but after re flashing ROM through Odin it was fine.
windowsvistas said:
Does your phone used to connect properly beforethe problem, if the answer is yes,
Then you should reinstall ROM as it may be corrupted, i also had same problem but after re flashing ROM through Odin it was fine.
Click to expand...
Click to collapse
I bought a new cable, and it works. Thanx!
Hi guys, today I set up my notebook, to use in the future, MIUI flashing tool (No bootloader unlock in this machine, cause: ryzen CPU).
After installing the drivers I restarted in fastboot mode and all ok..recognized device (Android bootloader interface).
subsequently, to restart, I typed:
PHP:
fastboot reboot
message returned in the phone:
PHP:
"press any key to shutdown"
In my desktop pc (front USB 2.0 connectors), I do not have any problem.
For me it is a big problem because I will soon have to leave home for work and I need to use the notebook to flash the phone..
Any way to fix this issue? Many thanks
autoradio78 said:
Hi guys, today I set up my notebook, to use in the future, MIUI flashing tool (No bootloader unlock in this machine, cause: ryzen CPU).
After installing the drivers I restarted in fastboot mode and all ok..recognized device (Android bootloader interface).
subsequently, to restart, I typed:
PHP:
fastboot reboot
message returned in the phone:
PHP:
"press any key to shutdown"
In my desktop pc (front USB 2.0 connectors), I do not have any problem.
For me it is a big problem because I will soon have to leave home for work and I need to use the notebook to flash the phone..
Any way to fix this issue? Many thanks
Click to expand...
Click to collapse
For me was the same problem. I made the contact between the Poco and the PC in another USB port and it is work! I don't know why, but the solve for your problem is an other USB port to use.
Thanks for replay my friend. In my notebook there are only 2 USB ports 3.0..so..no way..
I repeat, form me is a big problem...away from home (and from my desktop PC) for work with my laptop I can't flash my phone..
Nobody knows how to solve the problem?
Try this tutor and download the adb tools
https://forum.xda-developers.com/showthread.php?t=2764230
Same here it will be so much better to get this fixed as I cannot fastboot anything from my Ryzen PC be it anything
Hi Guys,
Am also unable to use fastboot commands like flash recovery and others on Pocof1 using an Amd lap. Tried with both my windows and linux installs.
Is this a known bug.
The interesting thing is that my redmi note 4 has no problem with the same lap while using fastboot.
I don't have this problem but I'm using USB 2.0 cable.
This is a known problem due to usb 3.0. It started working when i bought usb 2.0 hub
Just use usb hub it is the only way to get things working
autoradio78 said:
Hi guys, today I set up my notebook, to use in the future, MIUI flashing tool (No bootloader unlock in this machine, cause: ryzen CPU).
After installing the drivers I restarted in fastboot mode and all ok..recognized device (Android bootloader interface).
subsequently, to restart, I typed:
PHP:
fastboot reboot
message returned in the phone:
PHP:
"press any key to shutdown"
In my desktop pc (front USB 2.0 connectors), I do not have any problem.
For me it is a big problem because I will soon have to leave home for work and I need to use the notebook to flash the phone..
Any way to fix this issue? Many thanks
Click to expand...
Click to collapse
ml nd
I also have the same issue because of my AMD Ryzen CPU.
Thank you!
any official solution of this ? is it a known issue by amd? i oredered a usb 2.0 hub and lets see if it works
---------- Post added at 10:51 AM ---------- Previous post was at 10:48 AM ----------
https://ibb.co/NnDPT2c
Ashish Gupta1999 said:
any official solution of this ? is it a known issue by amd? i oredered a usb 2.0 hub and lets see if it works
---------- Post added at 10:51 AM ---------- Previous post was at 10:48 AM ----------
https://ibb.co/NnDPT2c
Click to expand...
Click to collapse
Hi, i went to a shop an dtried with a cheap usb 2.0 hub, but still fastboot cammands failed.
As I mentioned in a previous comment my note 4 works perfectly in this ryzen 5 lap.
I have the same problem on my i3 8100, does anyone have any solution?
Shknz said:
I have the same problem on my i3 8100, does anyone have any solution?
Click to expand...
Click to collapse
USB 2.0 hub. But i dont recommend cheap one. Baseus usb 2.0 hub worked in my case
EugenStanis said:
USB 2.0 hub. But i dont recommend cheap one. Baseus usb 2.0 hub worked in my case
Click to expand...
Click to collapse
I have tried a 2.0 hub and it works, although the hub is very old. What problem could I have with something so old?
pakku90 said:
Hi, i went to a shop an dtried with a cheap usb 2.0 hub, but still fastboot cammands failed.
As I mentioned in a previous comment my note 4 works perfectly in this ryzen 5 lap.
Click to expand...
Click to collapse
i ordered a quantomn usb hub 4 usb 2.0 ports from amazon.in for 120 rs and it worked , i am able to use fastboot commnads and flash stuff on my zenfone max pro m1
link - https://amzn.to/2LEf7j3
my cpu -ryzen5 1600
Ashish Gupta1999 said:
i ordered a quantomn usb hub 4 usb 2.0 ports from amazon.in for 120 rs and it worked , i am able to use fastboot commnads and flash stuff on my zenfone max pro m1
link - https://amzn.to/2LEf7j3
my cpu -ryzen5 1600
Click to expand...
Click to collapse
Thats great, will try this one. Thanks
Edit: SOLVED
Received the hub today 27 jul and what you know the damn thing works. Thanks again for suggestions. Anybody facing the issue please buy this.
pakku90 said:
Thats great, will try this one. Thanks
Edit: SOLVED
Received the hub today 27 jul and what you know the damn thing works. Thanks again for suggestions. Anybody facing the issue please buy this.
Click to expand...
Click to collapse
glad , it worked for you too , i was very depressed when i came to know that i cant use fastboot on my ryzen gaming bulid , after crunching my brain and surfing all over the internet came this workaround , also i advice you to spam the amd customer care to fix this issue officailly , atleast this issue will get acknowledge by them
Hello everyone i"m trying to unlock my pocof1 boot-loader, i just get it and tried to get recognized by 3 computers.
it look like xiaomi ****s everything on them last upgrade. im on miui 11.0.8.
i have tried on linux and windows and the result is the same.
i successfully see the device at adb and mtp and file transfer... the only thing that i counlt reconzied is fastboot.
i have tried different cables and different ports USB2 and 3 , also upgrade and install manually drivers and mi suite.
noting works
someone has an idea???
thanks a lot
Same problem happened with me..my computer didn't work. I unlocked my boot loader with my frnds computer. You need to try to unlock your bootloader by any other computer..
Doronmak said:
Hello everyone i"m trying to unlock my pocof1 boot-loader,
noting works
someone has an idea???
thanks a lot
Click to expand...
Click to collapse
Intel PC, USB 2 4 port hub between PC & fone.
Sent from my SM-T720 using XDA Labs
guhvanoh said:
Intel PC, USB 2 4 port hub between PC & fone.
Sent from my SM-T720 using XDA Labs
Click to expand...
Click to collapse
i have tried in more 2 pcs and no diffrent , and i also try with other poco and the pc can recognized fastboot...
update
I tried on other phone and it recognized it.
it looks somthing on my phone and i cant understand why
also tried factory reset
Please someone?
Doronmak said:
Please someone?
Click to expand...
Click to collapse
If you still have issues pls follow this video. I got results in my similar case,
praveen4u13 said:
If you still have issues pls follow this video. I got results in my similar case,
Hi All, I am facing the same problem, I have 2 poco F1 phones. One gets detected in pc and the other one doesn't but it still recognises usb pen drives using otg cable. I have tried multiple cables. It cannot be driver issue as one phone is detected and both are on miui 12.0.3, do you think it is usb port of this phone that has issues and if it is then how come the usb otg is detected. This problem started when I did a backup of the phone to unlock it.The developer option is enabled and usb debugging is on. The service center tried replacing the usb port and still I have the same issue. They said the motherboard of the phone could have problem, but how come the phone works if motherboard has issues. Can someone please help me.
Click to expand...
Click to collapse
Hi, I have the T-Mobile OnePlus 7T Pro Mclaren Edition and for some weird reason I'm not receiving OTA updates. I'm trying to use the MSM tool to update my device because since I have the T-Mobile version, I can't do local upgrades. However, the MSM tool doesn't recognize my device so therefore I can't upgrade it. ADB works just fine, and the computer recognizes my phone in fastboot mode, just the MSM tool isn't working. Someone please help!
Try the drivers from here
Download Qualcomm USB Driver v1.0 (Official Driver)
Download Qualcomm USB Driver v1.0 which allows you to connect devices having the Qualcomm Chipset to the Windows Computer.
androiddatahost.com
Abaddon said:
Try the drivers from here
Download Qualcomm USB Driver v1.0 (Official Driver)
Download Qualcomm USB Driver v1.0 which allows you to connect devices having the Qualcomm Chipset to the Windows Computer.
androiddatahost.com
Click to expand...
Click to collapse
You're a lifesaver!! These also worked for 8 pro
Ive tried these qualcomm drivers, no luck . Computer will not recognize op7t. It use too, prior to " qualcomm crash dump".
I've tried other computers, different operating systems.
ADB, Fastboot, MSM tool not even device manager sees my phone
any other ideas ?
hightech316 said:
Ive tried these qualcomm drivers, no luck . Computer will not recognize op7t. It use too, prior to " qualcomm crash dump".
I've tried other computers, different operating systems.
ADB, Fastboot, MSM tool not even device manager sees my phone
any other ideas ?
Click to expand...
Click to collapse
If your using Windows 10, have you tried going to Optional Updates for the driver?
Hw4ng3r said:
If your using Windows 10, have you tried going to Optional Updates for the driver?
Click to expand...
Click to collapse
Yes,
I have ran into something odd. When I attempt to boot into EDL mode , phone just shows a charging battery. Which usually it will not, even
if my phone is being charged ( while off ) there is no on screen battery .
hightech316 said:
Ive tried these qualcomm drivers, no luck . Computer will not recognize op7t. It use too, prior to " qualcomm crash dump".
I've tried other computers, different operating systems.
ADB, Fastboot, MSM tool not even device manager sees my phone
any other ideas ?
Click to expand...
Click to collapse
Have you tried a different usb cable?
parag0n1986 said:
Have you tried a different usb cable?
Click to expand...
Click to collapse
First thing I have tried .
hightech316 said:
First thing I have tried .
Click to expand...
Click to collapse
If you're using windows OS, maybe try the generic windows driver instead of the Qualcomm driver, unless you've tried that as well.
parag0n1986 said:
If you're using windows OS, maybe try the generic windows driver instead of the Qualcomm driver, unless you've tried that as well.
Click to expand...
Click to collapse
After enabling " Show Hidden Devices " within device manager, you can see the list of my offline android devices.
When installing OEM oneplus drivers, I had disabled driver signing.
Platform-tools are up to date.
I've covered everything,
Only this is , I received this "qualcom dump" after a kernel flash. Now when my device is off , and plugged into wall, No on screen battery charger indicator .
hightech316 said:
After enabling " Show Hidden Devices " within device manager, you can see the list of my offline android devices.
When installing OEM oneplus drivers, I had disabled driver signing.
Platform-tools are up to date.
I've covered everything,
Only this is , I received this "qualcom dump" after a kernel flash. Now when my device is off , and plugged into wall, No on screen battery charger indicator .
Click to expand...
Click to collapse
Still no luck with EDL mode?
parag0n1986 said:
Still no luck with EDL mode?
Click to expand...
Click to collapse
No luck .
I am going to reach out to the kernel developer, of the kernel I had flashed that caused the qualcomm crash.
Really appreciate your insight and help .
My money is on whatever is keeping the phone " asleep" while charging turned of
hightech316 said:
No luck .
I am going to reach out to the kernel developer, of the kernel I had flashed that caused the qualcomm crash.
Really appreciate your insight and help .
My money is on whatever is keeping the phone " asleep" while charging turned of
Click to expand...
Click to collapse
I saw the post on the Dora thread. You mentioned that you did a reset from recovery. Did you ever flash back the original boot.img from the ROM you're using?
Hw4ng3r said:
I saw the post on the Dora thread. You mentioned that you did a reset from recovery. Did you ever flash back the original boot.img from the ROM you're using?
Click to expand...
Click to collapse
I assumed that factory reset also reset boot.img !
This might just be my fix! I'll flash and report back.
EDIT:
Cannot find a stock boot img for build number RQ3A.210705.001. ( google comes up as pixel device? perhaps my ROM changed the value within buildprop )
Baseband version SM8150_GEN-PACK-2
Flashed neptune kernel, no change.
hightech316 said:
I assumed that factory reset also reset boot.img !
This might just be my fix! I'll flash and report back.
EDIT:
Cannot find a stock boot img for build number RQ3A.210705.001. ( google comes up as pixel device? perhaps my ROM changed the value within buildprop )
Baseband version SM8150_GEN-PACK-2
Flashed neptune kernel, no change.
Click to expand...
Click to collapse
What ROM are you running? I have a bag of a bunch of them I might have one for you.
parag0n1986 said:
What ROM are you running? I have a bag of a bunch of them I might have one for you.
Click to expand...
Click to collapse
Project-Xtended XR v9.0
I am on the op7t.
Went ahead and tried 2 different 3rd party kernels. Still not recognizing .
hightech316 said:
Project-Xtended XR v9.0
I am on the op7t.
Went ahead and tried 2 different 3rd party kernels. Still not recognizing .
Click to expand...
Click to collapse
Dang. Have one for the 7 pro :-( you still have the zip you used to install the ROM?
parag0n1986 said:
Dang. Have one for the 7 pro :-( you still have the zip you used to install the ROM?
Click to expand...
Click to collapse
I do, I should extract and just grab it from there! Thank you
hightech316 said:
I do, I should extract and just grab it from there! Thank you
Click to expand...
Click to collapse
That's what I was going to say!
parag0n1986 said:
That's what I was going to say!
Click to expand...
Click to collapse
No dice
EDIT
wait, I may have it working
Windows 10 saw a unrecognized device. Though it was phone, but must of been my new keyboard
I've heard of way of booting into EDL mode via magisk module?
Hi Everyone,
I need help with Odin. I am new to this root and I was trying to install TWRP through AP Odin v3.13.4 but my Windows 10 does not detect my Tab A8 in downloading mode.
I have tried replacing cables, reinstalling drivers(Samsung-USB-Driver-v1.7.48.0), smart switch and even switching my PC (Windows 10) but the drivers are not detected and when I try to install the driver by providing location it gives me an error that "Device Description Request Fail". I need to get through this and I will really appreciate your help.
mhmaqsood said:
Hi Everyone,
I need help with Odin. I am new to this root and I was trying to install TWRP through AP Odin v3.13.4 but my Windows 10 does not detect my Tab A8 in downloading mode.
I have tried replacing cables, reinstalling drivers(Samsung-USB-Driver-v1.7.48.0), smart switch and even switching my PC (Windows 10) but the drivers are not detected and when I try to install the driver by providing location it gives me an error that "Device Description Request Fail". I need to get through this and I will really appreciate your help.
Click to expand...
Click to collapse
This seems to be a bad usb cable or bad usb port.
mvikrant97 said:
This seems to be a bad usb cable or bad usb port.
Click to expand...
Click to collapse
That's why I have tried with different cable and even different PC.
mhmaqsood said:
That's why I have tried with different cable and even different PC.
Click to expand...
Click to collapse
So it pretty evident that there's something wrong with the tablet USB port.
mvikrant97 said:
So it pretty evident that there's something wrong with the tablet USB port.
Click to expand...
Click to collapse
When I connect it normally I can access all the files and its memory. But I am facing this problem in downloading mode only.
Oh then goo
mhmaqsood said:
When I connect it normally I can access all the files and its memory. But I am facing this problem in downloading mode only
Click to expand...
Click to collapse
mhmaqsood said:
When I connect it normally I can access all the files and its memory. But I am facing this problem in downloading mode only.
Click to expand...
Click to collapse
that's pretty strange. Can you give me Remote access to troubleshoot your connection problem?
mvikrant97 said:
Oh then goo
that's pretty strange. Can you give me Remote access to troubleshoot your connection problem?
Click to expand...
Click to collapse
Yes I can. will anydesk be okay?
mhmaqsood said:
Yes I can. will anydesk be okay?
Click to expand...
Click to collapse
Yes please PM me for further details, please don't share such sensitive information here. Thankyou.