So i got my Z18 mini with gapps and right before i installed Gapps (mini not stock) i wiped everything on my phone. When i boot it, i get into the startup stuff and when i get to the "Account Added " or "Name the phone " section i put in the details and press next and nothing happens....i need help on this fast.
Related
Hi,
I flashed mwakious3Drom® v7.0 as described in the thread by mwakious. The phone booted without any problems. I then downloaded and flashed the latest update, 8.6. All went well until the phone displayed 'Setup Wizard' at the begining and then a message 'Setup wizard has closed'. The phone then got stuck on HTC logo (white screen with HTC logo) and didn't respond to any button press or anything else. I took out the battery and flashed both the ROM as well as the update again making sure that I did 'clean' the system using 'Superwipe' provided in the thread. Phone booted fine and again stuck at the HTC screen.
I then tried v8.5 and the phone again got stuck at the HTC logo after boot.
The phone works fine with v7.00 though.
Thanx.
P.S. Awesome bootanimation 'mwakious'.
Special thanx to ALL the developers here.
Cheers
Phone: HTC EVO 3D
Sounds like its the rom and not the phone just for keepsakes go ahead flash 7 again and do flash image gui the app in the market flash the new 8.5 and then go from theres
Hi, I got the same issue with the same rom and So you flashed the 7.0 complete ROM. Then mwakious asks to boot once and then patch it to 8.X . What has happen is mwakious haven't included proper working "HTC User Seteup" bundles with the 8.X patches, Its only included in the ver7.0.
So your problem has starts when you wipe your "Phone data", or "factory reset" or any User related data. Then on the boot screen phone tries to find the user settings (i.e language, wifi bla bla) when it cannot find the settings it starts the User customization wizar (which is not available in the 8.X updates) So here comes the stupid error. So here is the fix :
1. SuperWipe the phone
2. Install mwakious 7.0 base ROM as usual.
3. Boot once and Run it and go through the customize wizard and set language etc.
4. Then put 8.x patch in to your SD Card and reboot in to recovery.
5. ONLY WIPE APPLICATION CACHE and DELVIK CACHE , Do not use factory reset, or full phone reset (as this will erase your customization data)
6. Flash the zip file using recovery
6. Then reboot phone and you will be prompted in to a dialog box that android is upgrading the softwares.
7. Wait a moment, voila you phone works back again..
Thanks if i helped you out
First of all, I would like to say hello, since I'm new on this forum!
So, to begin with, my problem is the following: I'm trying to install the CyanogenMod on my vodafone 858 smart. I followed the instructions on this forum:
-rooted my phone
-installed ROM Manager + Clockwork recovery
-in ROM Manager I selected Install ROM from SD card -> checked to make a backup, to wipe data and cache and to wipe dalvik cache
-phone rebooted into recovery mode -> could't see anything but the small hourglass
-waited for more then an hour, nothing changed, hourglass was still there
-took out battery, reinserted it, started phone and everything worked properly, but I still have 2.2 version of Android
-I tried to install CyanogenMod again, this time switching off my phone, and rebooting into recovery mode manually
-after rebooting into recovery mode, a message appeared, saying it is unpacking 1/2 (the process bar not moving anything not even after an hour) and below it states that the 'update has failed'
Could anyone please help me with this issue, I'd really like to upgrade my phone, but I can't seem to manage.
ps.: sorry if this has been asked, I couldn't find a similar thread.
Thank you!
HELP! My phone stuck on boot screen (or boot loop) can someone upload their backup of vodafone 858 phone (or system.img) file???
PLZ HELP My phone dont work...
So I recently got a nexus 5and I'm giving my old ZTE Skate to my dad. So I wiped all user data, formatted system, flashed a jenkins CM 10.2 rom (the 2nd or 3rd newest build as of posting this.I flashed a stripped gapps found here. And now whenever I start the phone it successfully boots but Setup Wizard crashes whenI tap on next on tzhe language select screen. I figured thet I used a bad gapps but I thought it would work, since it worked with an earlier cm 10.2 jenkins build. Sure I would just reflash but for some reason if I boot into cwm recovery (5.5.0.4, don't remember where I got it) from a turned off state (power+volume down) the buttons doesn't work in it. I always had to boot into it with the extended power options. But setup wizard crashes everytime I don't have access to the settings app so i can't enable advanced boot options. so I basicly can't do anything woth recovery. and I can't do anything with fastboot and adb either because i can't enable usb debugging
any help on how to restore it would be appreciated
Longi94 said:
So I recently got a nexus 5and I'm giving my old ZTE Skate to my dad. So I wiped all user data, formatted system, flashed a jenkins CM 10.2 rom (the 2nd or 3rd newest build as of posting this.I flashed a stripped gapps found here. And now whenever I start the phone it successfully boots but Setup Wizard crashes whenI tap on next on tzhe language select screen. I figured thet I used a bad gapps but I thought it would work, since it worked with an earlier cm 10.2 jenkins build. Sure I would just reflash but for some reason if I boot into cwm recovery (5.5.0.4, don't remember where I got it) from a turned off state (power+volume down) the buttons doesn't work in it. I always had to boot into it with the extended power options. But setup wizard crashes everytime I don't have access to the settings app so i can't enable advanced boot options. so I basicly can't do anything woth recovery. and I can't do anything with fastboot and adb either because i can't enable usb debugging
any help on how to restore it would be appreciated
Click to expand...
Click to collapse
http://forum.androidsrbija.com/viewtopic.php?f=209&t=3727
solution for your problem, just use google translate
Hi, I'm not experienced with custom roms, so I bricked my phone trying to install cyanogenmod, please help me
I tried to install custom rom on my xperia p so I unlocked bootloader, rooted and got recovery. Everything seemed to be fine until i tried to flash cyanogenmod, I can't provide link because I'm new user. Using Flashtool I accidentally (not knowing exactly what I'm doing) chose "select system to Flash" and klicked on boot.img from this pack. After several minutes without respond it showed only "Please check the log before rebooting into system" so I disconnected phone. When I try to start, it only shows sony logo for a short while and then it resets, and shows it again and resets... I can only reset it by holding vol+ and power button until it vibrates 3 times, then I can put it in fastboot mode.
Please tell me, what should I do now. And sorry for my bad english.
Flash stock, flash the boot.img in fastboot mode, reboot and flash the zip.
If you did not copy the zip yet boot after flash and copy.
Thank You very much. Everything works fine now, excepting data access via mobile network. I'll try to find the answer in another thread. Thanks again!
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
i fixed it using these steps, Thanks
1. You will need the Stock Rooted ROM: [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2… | LG G Pad 10.1 | XDA Forums
2. Stock Recovery Image: https://onedrive.live.com/redir?resi...int=file,img
[OPTIONAL]
- I downloaded the USB Driver suite so I can make sure it all connects and works, this really is optional, but I would HIGHLY suggest it!
LG Software & Firmware | LG U.S.A
- I also download this nifty tool called DP Tools by danielpinto8zz6 over at XDA. This just made it a lot easier to reboot to recovery and all that fun stuff.
[Tool][Win] DP TOOLS - Manage your LG device | LG G Pad 10.1 | XDA Forums
[MANUAL RECOVERY]
If you do not want to install the drivers and DP Tools, you can reboot to recovery using the following method:
1. Power OFF your device and unplug from USB
2. Press Vol-Down + Power and HOLD until you see the LG Logo (will only take a couple seconds)
3. Let go of the POWER button ONLY
4. Keep holding the Vol-Down, then also press Power + Vol-Up (so you should now be holding ALL 3 BUTTONS)
5. Wait for recovery mode to start and you can let go of the buttons
[THE PROCESS]
1. Copy the ROM and Recovery Image to to SD Card or Internal Storage of your device
2. Reboot to Recovery
3. Wipe, Wipe, Wipe
4. Flash the Stock Rooted ROM
5. Reboot and set up your device far enough for you to get into the Play Store and download an App
6. Download Flashify: https://play.google.com/store/apps/d...llner.flashify
7. Launch the app and flash your stock recovery
8. DO NOT REBOOT YET (however, if you do reboot, it's really not an issue)
9. Open the Super User app that is already installed
10. Go into Settings and then find the In-Root (Uninstall) option and you will get a warning that Root will be removed
11. Complete the instructions on the screen and you are now back to stock
[TROUBLESHOOTING]
- If SU will not uninstall and just hangs, restart the device and try again
- If the ROM starts acting strange, Factory Restore (this did not happen to me, but happened to a friends and reset fixed it all)
Please let me know if anyone has any questions!!
Thanks!
Quick reply to this message Reply
zfk110 said:
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
Click to expand...
Click to collapse
just flash ur stock rom