Hello Guys
I was wondering if anyone could share the update patch for EMUI 9 to the latest update (9.0.0.159)? This patch fixes the Call stability and Camera issues. The patch is 4.4 Megabytes and it is called Patch03. I've updated to EMUI 9 then rolled back to EMUI 8 because i had issues with calls.
My OS Info: COL-L29, EMUI 9, 9.0.0.159 (C185E2R1P11) Egypt (Middleast Firmware).
mooooorz1981 said:
Hello Guys
I was wondering if anyone could share the update patch for EMUI 9 to the latest update (9.0.0.159)? This patch fixes the Call stability and Camera issues. The patch is 4.4 Megabytes and it is called Patch03. I've updated to EMUI 9 then rolled back to EMUI 8 because i had issues with calls.
My OS Info: COL-L29, EMUI 9, 9.0.0.159 (C185E2R1P11) Egypt (Middleast Firmware).
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3386/g1699/v188842/f1/full/update.zip
<feature>
This update fixes an issue where phone numbers would be incorrectly marked by online directories, and an issue where the Camera would occasionally not respond in AI photography mode.
</feature>
Thanks but the phone refused to accept the update ?
mooooorz1981 said:
Thanks but the phone refused to accept the update
Click to expand...
Click to collapse
You have to use hisuite to flash update. Can't do it using your phone.
Y300-0100 said:
You have to use hisuite to flash update. Can't do it using your phone.
Click to expand...
Click to collapse
Thanks again for the reply. Is there any guide how to do so? I never flashed an update or rom using hisuite. I used to do it on my old phone through twrp and fastboot commands. Thanks in advance
mooooorz1981 said:
Thanks again for the reply. Is there any guide how to do so? I never flashed an update or rom using hisuite. I used to do it on my old phone through twrp and fastboot commands. Thanks in advance
Click to expand...
Click to collapse
First download HiSuite from here https://www.filehorse.com/download-hisuite/35459/
and install it.
Go to https://pro-teammt.ru/huawei-firmware-finder/ and download Firmware Finder.
Go to https://pro-teammt.ru/firmware-database/?firmware_model=COL&firmware_page=0
and find update you need. Right click and copy link location.
Open Firmware Finder and click DNS update. Paste link and register.
Copy DNS to clipboard and open network properties for IPv4 and paste DNS
and save. Now open HiSuite and click update
screenshot tools
upload picture to link
Click update and just wait for update proces to finish.
Process is same for any other update or downgrade.
Y300-0100 said:
First download HiSuite from herehttps://www.filehorse.com/download-hisuite/35459/
and install it.
Go tohttps://pro-teammt.ru/huawei-firmware-finder/and download Firmware Finder.
Go tohttps://pro-teammt.ru/firmware-database/?firmware_model=COL&firmware_page=0
and find update you need. Right click and copy link location.
Open Firmware Finder and click DNS update. Paste link and register.
Copy DNS to clipboard and open network properties for IPv4 and paste DNS
and save. Now open HiSuite and click update
screenshot tools
upload picture to link
Click update and just wait for update proces to finish.
Process is same for any other update or downgrade.
Click to expand...
Click to collapse
Many thanks for the reply. I've just done the above steps, but once i change my connectio's DNS, hisuite keeps telling me no internet connection when i click check for update ?
mooooorz1981 said:
Many thanks for the reply. I've just done the above steps, but once i change my connectio's DNS, hisuite keeps telling me no internet connection when i click check for update ?
Click to expand...
Click to collapse
Don't know what is the problem. Those are screen shots from my pc when I was typing so you can see that everything is OK at my side.
mooooorz1981 said:
Many thanks for the reply. I've just done the above steps, but once i change my connectio's DNS, hisuite keeps telling me no internet connection when i click check for update ?
Click to expand...
Click to collapse
I had the same problem. I tried closing all system windows and the last window in Firmware finder after changing the DNS and it's downloading the update now.
After dns entry when I try to check for updates from Hi suite it's show undbale to connect to Internet pls help
mujju85 said:
After dns entry when I try to check for updates from Hi suite it's show undbale to connect to Internet pls help
Click to expand...
Click to collapse
Did you try clearing the DNS cache?
duanpv said:
Did you try clearing the DNS cache?
Click to expand...
Click to collapse
I have enter the dns entry on my laptop WiFi setting and after that Hi suite was giving the error
mujju85 said:
I have enter the dns entry on my laptop WiFi setting and after that Hi suite was giving the error
Click to expand...
Click to collapse
Try this it need to change DNS in Router.
https://forum.xda-developers.com/showthread.php?p=78571485#post78571485
miststudent2011 said:
Try this it need to change DNS in Router.
https://forum.xda-developers.com/showthread.php?p=78571485#post78571485
Click to expand...
Click to collapse
Not working... Same problem, no connection.
AsimRauf_44 said:
Not working... Same problem, no connection.
Click to expand...
Click to collapse
They check whether you have entered correct DNS or not ?
Other user too had same problem he entered wrong DNS
To be honest, I did download the rom yesterday, and went to bed because it was late. Today's morning I had tried and tried about 4 hours before the success. I did uninstall and install many hisuite version, changed and rolled back the dns address, registered different roms. Some times, it was like 'checking the internet connection' forever. Lastly, it was stuck at 99% downloading. I decided to click 'cancel' and rechecked and finally it worked. Later, I got the small update to fix phone call issue. Overall, 9 is good but i have to use Huwei launcher, there are some issuses with nova launcher (the lastest beta).
miststudent2011 said:
They check whether you have entered correct DNS or not ?
Other user too had same problem he entered wrong DNS
Click to expand...
Click to collapse
188.225.84.142 is there in the DNS settings.
HiSuit Still showing error in network connection. However the query.hicloud is showing message "connected to teammt server". Something like this.
For all. This is Q&A section. Don't provide statement "I have no Internet connection". Please provide information what have you done. Wich version of hi suite have you installed, did you register firmware for download, did your antivirus software send some massage, did you close firmware finder before trying to download firmware, etc.
If you give more accurate information then you will get correct answer as soon as possible.
AsimRauf_44 said:
188.225.84.142 is there in the DNS settings.
HiSuit Still showing error in network connection. However the query.hicloud is showing message "connected to teammt server". Something like this.
Click to expand...
Click to collapse
May be it's being blocked by antivirus firewall. So it can't access internet
miststudent2011 said:
May be it's being blocked by antivirus firewall. So it can't access internet
Click to expand...
Click to collapse
Internet is working on chrome.
If i remove DNS and set to auto then the search doesn't say no internet connection.
How can Firewall only block HiSuit when DNS is changed?
Related
Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
search for kz updte
arvinoids said:
Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
Click to expand...
Click to collapse
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Hi, can someone please help to upload the SEA firmware ? There seems to be a problem downloading it from lgmobile
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
The_ERROR said:
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
Click to expand...
Click to collapse
I can't seem to load that page. How do I verify for port access 9002?
I tested it just minute before, so I'm sure, that it works.
Test:
Start -> Run... -> cmd
in command line enter:
telnet csmg.lgmobile.com 9002 - brobably you get following:
...>telnet csmg.lgmobile.com 9002
Connecting To csmg.lgmobile.com...Could not open connection to the host, on port
9002: Connect failed
1) Try switch off firewall
2) Find some free proxy on internet and use it for proxying of connection
3) I try prepare this for you (I'm on work and here port 9002 is not allowed, so I have to download it remotely through my router at home and I have slow speed connection )
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
adrianghaust said:
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
Click to expand...
Click to collapse
Fine!! You are welcome!
The_ERROR said:
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Click to expand...
Click to collapse
i have the exact same problem !!!!!!!! you fixed yours ??? how ?!?!? plz help me !!!!!
www.forum.xda-developers.com/showthread.php?t=1060121
to reflash official firmware go to the link above our click on the link in my signature.
same problemmmm !!!!!!!! plz help !!!!! :'(
Got Samsung Galaxy S II on 14th from Letsbuy.I want to check updates in it for that I need to log in into Samsung but unable After entering Password and email id it says Processing and after a min it shows Error saying Processing Failed..Please Help how to log in? and is there any other way to check updates other than this way? I know Kies is there but will it show every Update?
I want to check updates in it
Firmware/software update on phone has never worked yet .
jje
JJEgan said:
I want to check updates in it
Firmware/software update on phone has never worked yet .
jje
Click to expand...
Click to collapse
Oh so You also having same Problem like me
Any one else have same Problem or Only me and JJEgan?
I would just use ODIN guys. If your phone is branded then Kies will only show the update that is relevant to that provider, not the latest update. And even if it does show the latest update I have read about issues trying to apply the update.
ODIN is far easier, just read up about it.
The software update check in settings/about phone works fine for me as long as you have a Samsung account, thought at the moment it just says "no update available"
What i posted should be read >>>as far as i am aware nobody on SGS2 or even SGS1 gets an update via that method as its not turned on by Samsung for firmware updates .
jjue
I want to know is will Kies show even software updates? ..I have samsung account but it say's Processing when I click sign in and after that is says Processing failed.
i had a similar problem
Raviteja_HYD said:
I want to know is will Kies show even software updates? ..I have samsung account but it say's Processing when I click sign in and after that is says Processing failed.
Click to expand...
Click to collapse
A firmware update on phone >>> void does not work never worked Samsung have not turned it on ever .
Kies updates firmware if the phones product code has later firmware updated by the phone vendor as always .
jje
JJEgan said:
A firmware update on phone >>> void does not work never worked Samsung have not turned it on ever .
Kies updates firmware if the phones product code has later firmware updated by the phone vendor as always .
jje
Click to expand...
Click to collapse
Oh,Samsung Never turned it on..Ok 1 More question there was a Camera Update once recently right? for that type of updates I need to login to samsung or Kies will show it or it will show up normally like update of YouTube,Angry Birds? I am sure that Update is already installed in my mobile bcoz Letsbuy got stock on 9th ( Before that only camera update released)
Raviteja_HYD said:
Oh,Samsung Never turned it on..Ok 1 More question there was a Camera Update once recently right? for that type of updates I need to login to samsung or Kies will show it or it will show up normally like update of YouTube,Angry Birds? I am sure that Update is already installed in my mobile bcoz Letsbuy got stock on 9th ( Before that only camera update released)
Click to expand...
Click to collapse
Thats via the blue Samsung Apps icon .
jje
JJEgan said:
Thats via the blue Samsung Apps icon .
jje
Click to expand...
Click to collapse
WOW what a Noob I am.I have not seen all the Apps yet..Thanks but I dont see any option there like check for updates
Updates show if available .
jje
JJEgan said:
Updates show if available .
jje
Click to expand...
Click to collapse
Oh So it shows if update is there when I open it..Will it show like Angry Bird and other Apps or will it give a Notification?
Go online and reset password, make sure it is numeric.
Sent from my GT-I9100 using Tapatalk
crypticc said:
Go online and reset password, make sure it is numeric.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Tried but it didn't Work
Hi everyone. Today i updated new version of Kies 2.0.3.1182_152. I tried several official firmwares, but Kies says 'S/W in your phone is not the official version. Unofficial version cannot be updated... Does anyone know what to do?
Yes, flash the official firmware and hard reset the device
Intratech said:
Yes, flash the official firmware and hard reset the device
Click to expand...
Click to collapse
I have done it several times, on every official firmwares...Not helped...
roymustafa said:
I have done it several times, on every official firmwares...Not helped...
Click to expand...
Click to collapse
maybe you forgot to set the proper country code (csc) in the dialer type *#272*your imei# then choose the country you got the phone in. take note you must use your original country's firmware.
Sent from my GT-I9100 using xda premium
roymustafa said:
I have done it several times, on every official firmwares...Not helped...
Click to expand...
Click to collapse
HARD RESET not factory reset. *2767*3855#
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Intratech said:
HARD RESET not factory reset. *2767*3855#
Click to expand...
Click to collapse
I have always been curious about this. What is the difference of hard reset from factory reset? I always assumed both are the same.
Sent from my SK17i using xda premium
Latest Kies Shows this error
I have Latest Kies Installed ,
Its Shows up error message when i connect my SGS 2.
But works perfectly on My SGS1.
I have 100% stock firmware. checked the settings all are perfect.
I even hard resetted the phone... No use same issue.
please help me
Check the Link
http://imageshack.us/photo/my-images/651/kieserror.jpg
The only help that can be given is the following .
One use an older version if this one has a flaw ,
Two complain to Samsung .
jje
JJEgan said:
The only help that can be given is the following .
One use an older version if this one has a flaw ,
Two complain to Samsung .
jje
Click to expand...
Click to collapse
But I think on Android devices, in most cases fault is not belong to Samsung, but to Google (Android Dev Team)...For example..I still have a wifi problem...Even in Service Center it couldnt be solved..They dont know what is the problem...I thought i am the only one that have wifi problem but not, look at this...http://code.google.com/p/android/issues/detail?id=1386#makechanges...From here is known that most problems is Android faults...
(My Wi-Fi problem is..in this days i have noticed a problem with my Samsung Galaxy S II.
Sometimes I have the gsII connected to my router but internet connection doesn't work.
I'll try to explain better what i mean... I start wifi on my gsII and use internet connection without problem. Then I set the phone in standby mode leaving wifi on. When after a while i want to use internet connection, it doesn't work. The telephone is still connected to my router but i can't use internet on the phone.
The only way to make internet connection work is to disable wifi e then reactivate it.
This is really frustrating....
I've got the telephone from three months but only now I'm noticing this problem because first I used to disable the wifi and activate it only when i need it.)
Intratech said:
HARD RESET not factory reset. *2767*3855#
Click to expand...
Click to collapse
i have done Hard Reset...Still not solved..
lvvine said:
I have Latest Kies Installed ,
Its Shows up error message when i connect my SGS 2.
But works perfectly on My SGS1.
I have 100% stock firmware. checked the settings all are perfect.
I even hard resetted the phone... No use same issue.
please help me
Check the Link
http://imageshack.us/photo/my-images/651/kieserror.jpg
Click to expand...
Click to collapse
Unchek the USB Debug ( Menu->Settings->Applications->Development ) mode and try again. This will solve the Kies error message.
solve my problem
prinzhernan said:
maybe you forgot to set the proper country code (csc) in the dialer type *#272*your imei# then choose the country you got the phone in. take note you must use your original country's firmware.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for advice. I have the problem until I have change the sale code. Now everything seems to be ok. Thank you very much!!!
Panayiotis said:
Thanks for advice. I have the problem until I have change the sale code. Now everything seems to be ok. Thank you very much!!!
Click to expand...
Click to collapse
You're welcome. Glad to help. Enjoy!
Sent from my GT-I9100 using xda premium
Hey guys! I am having this same issue. I got an update from Vodafone Spain and it gave me many errors, (2.3.6) and battery life was not as good. So I downloaded the original firmware, and now KIES doesn't recognize it. So I tried this method and it only says "ATL" on it, and then... Oh shucks! Here's a screen shot.
I downloaded it from sammobile.com and it says
I9100BUKE5 ## EXT4.PIT 2.3.3 2011 May DOWNLOAD
CSC is blank. But that's the version I had, and also:
http://hotfile.com/dl/120766439/6afee0e/I9100_VDF_I9100BUKE5.rar.html
That's my carrier. But the CSC on my phone says ATL. I don't know what this means, but now KIES won't recognize its version anymore .... Any ideas?
Update: Vodafone Spain is ATL! OK... So it reads it fine, but .... why can't KIES recognize the firmware?
Thanks
Is there an Oreo ROM for MATE LITE???Thx
zajcnr1 said:
Is there an Oreo ROM for MATE LITE???Thx
Click to expand...
Click to collapse
Not yet, unfortunately. Not even in internal testing build that I've seen so far.
duraaraa said:
Not yet, unfortunately. Not even in internal testing build that I've seen so far.
Click to expand...
Click to collapse
Hi, i bought 5 credits yesterday to flash firmware on fh. But i was unable to download the firmware let alone flash. The instructions for firmware flashing takes me back to rebranding instructions. My Mate 10 Alp 29 is already rebranded by the seller. The Hisuite version recommended to use did not work with my phone. It couldn't get connected with the phone no matter how much I tried.
thanks for the reply
peepee999 said:
Hi, i bought 5 credits yesterday to flash firmware on fh. But i was unable to download the firmware let alone flash. The instructions for firmware flashing takes me back to rebranding instructions. My Mate 10 Alp 29 is already rebranded by the seller. The Hisuite version recommended to use did not work with my phone. It couldn't get connected with the phone no matter how much I tried.
Click to expand...
Click to collapse
You need to remove whatever the newer version of HiSuite you used installed from the phone, and you need to enable USB debugging. It will definitely connect if you do it right.
duraaraa said:
You need to remove whatever the newer version of HiSuite you used installed from the phone, and you need to enable USB debugging. It will definitely connect if you do it right.
Click to expand...
Click to collapse
Ok but even the firmware i selected to download won't show up to be downloaded
peepee999 said:
Ok but even the firmware i selected to download won't show up to be downloaded
Click to expand...
Click to collapse
It has to be connected to download the firmware you selected... I'm not really sure what you're doing, so maybe contact FH support for further instructions, by email.
duraaraa said:
It has to be connected to download the firmware you selected... I'm not really sure what you're doing, so maybe contact FH support for further instructions, by email.
Click to expand...
Click to collapse
The Hisuite version refused to connect with my phone even after following the instructions u gave me above.
peepee999 said:
The Hisuite version refused to connect with my phone even after following the instructions u gave me above.
Click to expand...
Click to collapse
For it to connect, you need to make sure:
1. ADB is working (HiSuite will connect over ADB, not over HDB!!)
2. Any HiSuite software installed on the phone has been uninstalled.
It will definitely connect under the right conditions.
duraaraa said:
For it to connect, you need to make sure:
1. ADB is working (HiSuite will connect over ADB, not over HDB!!)
2. Any HiSuite software installed on the phone has been uninstalled.
It will definitely connect under the right conditions.
Click to expand...
Click to collapse
Please where do i enable ADB
peepee999 said:
Please where do i enable ADB
Click to expand...
Click to collapse
Tap the build number in about phone 7 times to enable developer mode. From developer options enable usb debugging.
peepee999 said:
Please where do i enable ADB
Click to expand...
Click to collapse
Settings -> System -> Developer Options -> turn on "USB debugging" and "OEM unlocking".
You have to activate the Developer Options first by taping 7 times on the build number but since you're on XDA you probably already know that.
Regards,
Safe
duraaraa said:
Tap the build number in about phone 7 times to enable developer mode. From developer options enable usb debugging.
Click to expand...
Click to collapse
So what's the next step after choosing the firmware
peepee999 said:
So what's the next step after choosing the firmware
Click to expand...
Click to collapse
Google for "updating android n huawei devices to android o using funkyhuawei"
You can see the instructions on the first hit for how to use HiSuite to install a firmware.
Maybe this work, but I have no idea...
https://www.needrom.com/download/huawei-mate-10-lite/
TheGamer69 said:
Maybe this work, but I have no idea...
https://www.needrom.com/download/huawei-mate-10-lite/
Click to expand...
Click to collapse
dont try it. its fake..
I sideloaded the pie beta (CRKE) and found that some of my apps started to freeze randomly. Because of this, I want to downgrade back to oreo. After researching a bit, it seems like I need to use either odin or smartswitch to do so. Odin just fails (tried multiple times) and smartswitch says my device is up to date. Any suggestions/fixes?
You have to do the emergency recovery in smart switch
profi_fahrer said:
You have to do the emergency recovery in smart switch
Click to expand...
Click to collapse
I tried that. In the emergency recovery menu, my device doesn't show up. Does it just take a while for it to appear or should it be instant?
Also, for reference, my s9+ is working, except for the apps that freeze
I think, you have to boot into download-mode for the smart switch recovery.
Also first plug in your phone and then open smart switch
theonelamp said:
I sideloaded the pie beta (CRKE) and found that some of my apps started to freeze randomly. Because of this, I want to downgrade back to oreo. After researching a bit, it seems like I need to use either odin or smartswitch to do so. Odin just fails (tried multiple times) and smartswitch says my device is up to date. Any suggestions/fixes?
Click to expand...
Click to collapse
1. Backup your phone using smart switch you installed on your computer.
2. Logout on your Samsung account.
3. Factory reset your phone.
4. Open smart switch on your computer and plug your phone.
5. Once your phone is connected to smart switch you will see the option to downgrade to the last official firmware installed on your phone. Good luck. Hope this help.
boybkol said:
1. Backup your phone using smart switch you installed on your computer.
2. Logout on your Samsung account.
3. Factory reset your phone.
4. Open smart switch on your computer and plug your phone.
5. Once your phone is connected to smart switch you will see the option to downgrade to the last official firmware installed on your phone. Good luck. Hope this help.
Click to expand...
Click to collapse
profi_fahrer said:
I think, you have to boot into download-mode for the smart switch recovery.
Also first plug in your phone and then open smart switch
Click to expand...
Click to collapse
Hi, I tried both of these and these don't seem to work. Any other ideas?
theonelamp said:
Hi, I tried both of these and these don't seem to work. Any other ideas?
Click to expand...
Click to collapse
You have to turn USB debugging on in the developer option in your phone's settings.
boybkol said:
You have to turn USB debugging on in the developer option in your phone's settings.
Click to expand...
Click to collapse
Yes, I turned it on before I tried the other things.
Make sure to unregister from the Beta. Use the samsung Members to do so. You might need the Old Samsung Members or the UK version. The US version was crashing on me after I installed PIE.
Open up Smart Switch on your pc and make sure to install smart switch from the play market on your phone before you plug it in.
Once that is done plug your phone and you should see your s9+ on Smart Switch (pc) and it will say something about downgrade update available.
Good luck
l3wish said:
Make sure to unregister from the Beta. Use the samsung Members to do so. You might need the Old Samsung Members or the UK version. The US version was crashing on me after I installed PIE.
Open up Smart Switch on your pc and make sure to install smart switch from the play market on your phone before you plug it in.
Once that is done plug your phone and you should see your s9+ on Smart Switch (pc) and it will say something about downgrade update available.
Good luck
Click to expand...
Click to collapse
Thanks for the reply. I actually couldn't sign up for the beta the official way (I have Xfinity Mobile) so I sideloaded it. I'm not sure if it will work but I'll try it anyways.
[/COLOR]
theonelamp said:
Thanks for the reply. I actually couldn't sign up for the beta the official way (I have Xfinity Mobile) so I sideloaded it. I'm not sure if it will work but I'll try it anyways.
Click to expand...
Click to collapse
I switched to U1 firmware and got the beta using the app and registering (Also on Xfinity). I did try doing a downgrade using smart switch and it was quite painful and once i finally got it to downgrade it looked like it had destroyed efs so no radio. But I was able to get the full firmware for xfinity and an Odin that works to downgrade and or switch to U1. Let me know if you need links for either.
johnwayne007 said:
[/COLOR]
I switched to U1 firmware and got the beta using the app and registering (Also on Xfinity). I did try doing a downgrade using smart switch and it was quite painful and once i finally got it to downgrade it looked like it had destroyed efs so no radio. But I was able to get the full firmware for xfinity and an Odin that works to downgrade and or switch to U1. Let me know if you need links for either.
Click to expand...
Click to collapse
Yeah, it'd be awesome if you could send the files over. Also, which version of Odin did you use?
I'm on SM-G965U and was able to downgrade without a problem but I had to use a patched odin to do it
Sent from my [device_name] using XDA-Developers Legacy app
Before I send you the links just double checking you have the S9 Plus. (sm-g965u)
johnwayne007 said:
Before I send you the links just double checking you have the S9 Plus. (sm-g965u)
Click to expand...
Click to collapse
Yeah, I have the plus and the same model number.
canynballa said:
I'm on SM-G965U and was able to downgrade without a problem but I had to use a patched odin to do it
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Which version was it and where can I get it?