I was attempting to install a zip and wiped everything off the device(no OS). I am only left out with TWRP and it won't recognize the OTG (shows 0 mb).
Windows doesn't recognize device. What can I do now?
Insert card with twrp rom ?
hultai said:
Insert card with twrp rom ?
Click to expand...
Click to collapse
SD card isnt recognized either
hugoseabra said:
I was attempting to install a zip and wiped everything off the device(no OS). I am only left out with TWRP and it won't recognize the OTG (shows 0 mb).
Windows doesn't recognize device. What can I do now?
Click to expand...
Click to collapse
Use a pc and flash miui rom using fastboot method
Dadovvv said:
Use a pc and flash miui rom using fastboot method
Click to expand...
Click to collapse
PC doesn't recognize phone
hugoseabra said:
PC doesn't recognize phone
Click to expand...
Click to collapse
Can u enter in fastboot on phone?
Dadovvv said:
Can u enter in fastboot on phone?
Click to expand...
Click to collapse
Yes, I can but pc still doesn't recognize in fastboot
hugoseabra said:
Yes, I can but pc still doesn't recognize in fastboot
Click to expand...
Click to collapse
Then u should start from pc i dont think its a phone issue since u can boot fastboot,
Check for pc is the drivers installed ( win 10 disable drivers signature and install drivers using options in miflash tool )
Try to change usb cable etc..
Dadovvv said:
Then u should start from pc i dont think its a phone issue since u can boot fastboot,
Check for pc is the drivers installed ( win 10 disable drivers signature and install drivers using options in miflash tool )
Try to change usb cable etc..
Click to expand...
Click to collapse
Tried all that, still no results
Related
I was about to flash boot.img using flashboot each time I connect windows says usb device not recognized I have installed htc sync manager and even cyanogenmod ADB universal drivers still face same problem I went to fastboot in bootloader still usb not recognized before flashing I haven't enabled usb debugging is this the reason for it if yes then what is the solution
I am on htc droid dna s-on I can still enter into recovery and stuck in boot logo
help
I can only do is adb sidebar in recovery coz my pc reads my phone only in recovery can I push boot.img using adb sidebar
HoW?????
now I can only enter recovery and adb sidebar no drivers are working every time it says usb device not recognized coz I didn't enabled usb debugging before flashing a rom I have to install boot.img file now as I am s-on.... can I do a s-off using recovery and adb coz only they are left
help me I am stuck in a critical situation plllzzzz help :crying:
onkar0027 said:
now I can only enter recovery and adb sidebar no drivers are working every time it says usb device not recognized coz I didn't enabled usb debugging before flashing a rom I have to install boot.img file now as I am s-on.... can I do a s-off using recovery and adb coz only they are left
help me I am stuck in a critical situation plllzzzz help :crying:
Click to expand...
Click to collapse
Download PDANet.
It will install the correct drivers.
sdamark said:
Download PDANet.
It will install the correct drivers.
Click to expand...
Click to collapse
done bro none of the driver recognizes my phone in flashboot
onkar0027 said:
done bro none of the driver recognizes my phone in flashboot
Click to expand...
Click to collapse
It should ask you if you want to redownload the htc drivers when you pick that you have a htc branded phone.
post to end this thread
thayl0 said:
It should ask you if you want to redownload the htc drivers when you pick that you have a htc branded phone.
Click to expand...
Click to collapse
posting to end this thread .. win 8.1 doesn't recognizes fastboot drivers it blocks the drivers I used my friend's pc running on win 8 and it worked
I used the proper drivers and flashed the img using fastboot ... thank you all for giving your time to my thread and giving replies
onkar0027 said:
posting to end this thread .. win 8.1 doesn't recognizes fastboot drivers it blocks the drivers I used my friend's pc running on win 8 and it worked
I used the proper drivers and flashed the img using fastboot ... thank you all for giving your time to my thread and giving replies
Click to expand...
Click to collapse
I didn't realize you were on win 8.1
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Guys, I have a xperia mini st15i device with CrDroid 4.4.4 KitKat Rom. Recently I tried to flash RR Lollipop roms Kernel on my device. But I failed to boot on fastboot mode over and over again. I have tried different cables, different usb even different pc's. But all the time i tried to connect it to usb cable holding volume up button the blue light( which is counted as a signal of fastboot mood) blinks once and phone went into charging mood. If i connect it on flashtool, flashtool recognise my device. If i try to boot device into fastboot via adb through flashtool it just lost connection with phone and phone goes into regular boot.
Guys please help me with this.what can i do now? what i am doing wrong? I am totally stucked with this since last few days.
mujib.sheikh11 said:
Guys, I have a xperia mini st15i device with CrDroid 4.4.4 KitKat Rom. Recently I tried to flash RR Lollipop roms Kernel on my device. But I failed to boot on fastboot mode over and over again. I have tried different cables, different usb even different pc's. But all the time i tried to connect it to usb cable holding volume up button the blue light( which is counted as a signal of fastboot mood) blinks once and phone went into charging mood. If i connect it on flashtool, flashtool recognise my device. If i try to boot device into fastboot via adb through flashtool it just lost connection with phone and phone goes into regular boot.
Guys please help me with this.what can i do now? what i am doing wrong? I am totally stucked with this since last few days.
Click to expand...
Click to collapse
Make sure you have the fastboot and adb drivers installed.
Hope this helped....
Peace .
userst15i said:
Make sure you have the fastboot and adb drivers installed.
Hope this helped....
Peace .
Click to expand...
Click to collapse
i installed fastboot and adb driver as well as driver for smultron from flashtool/drivers/ directory. i dont know what i am missing actually
no one to help
Use the flash mode to flash stock firmware and try again
karandpr said:
Use the flash mode to flash stock firmware and try again
Click to expand...
Click to collapse
I can't go to flashmode either. while i am connecting my usb holding vol up or volume down button to enter fastboot or flashmode its just blinking the blue or green led and phone enter into regular boot or charging mode.
what can i do??
no flashmode, no fastboot. I have installed drivers and use more than two pc already. :crying::crying::crying:
mujib.sheikh11 said:
I can't go to flashmode either. while i am connecting my usb holding vol up or volume down button to enter fastboot or flashmode its just blinking the blue or green led and phone enter into regular boot or charging mode.
what can i do??
no flashmode, no fastboot. I have installed drivers and use more than two pc already. :crying::crying::crying:
Click to expand...
Click to collapse
Same thing happens if you type
Code:
adb reboot bootloader
?
karandpr said:
Same thing happens if you type
Code:
adb reboot bootloader
?
Click to expand...
Click to collapse
sorry for late. i was in vacation. please tell me where should i type this command. I am not a developer. Just learning things. Please help me by telling little elaborate.
mujib.sheikh11 said:
sorry for late. i was in vacation. please tell me where should i type this command. I am not a developer. Just learning things. Please help me by telling little elaborate.
Click to expand...
Click to collapse
Open command prompt on windows
Navigate to x10flasher_lib folder in flashtool
then type
Code:
adb reboot bootloader
karandpr said:
Open command prompt on windows
Navigate to x10flasher_lib folder in flashtool
then type
Code:
adb reboot bootloader
Click to expand...
Click to collapse
i just did what you said. it showed me-
"adb" is not recognized as an internal or external command, operable program or batch file.
mujib.sheikh11 said:
i just did what you said. it showed me-
"adb" is not recognized as an internal or external command, operable program or batch file.
Click to expand...
Click to collapse
Unzip folder
Attach phone to your computer
run 1.bat
karandpr said:
Unzip folder
Attach phone to your computer
run 1.bat
Click to expand...
Click to collapse
After running this batch file device rebooted.
hmm
Here is what you can do
Remove all drivers and reinstall fastboot drivers again from flashtool/
karandpr said:
hmm
Here is what you can do
Remove all drivers and reinstall fastboot drivers again from flashtool/
Click to expand...
Click to collapse
I have uninstalled flashtool, removed the folder from drive, rebooted pc and then again installed flashtool and drivers as well. but its still the same. actually i am little confused about removing all drivers you said. are those drivers contained in any other places in pc beside flashtool folder?
Use this tool to remove all USB drivers
https://code.google.com/p/usboblivion/
It will remove all USB drivers .
karandpr said:
Use this tool to remove all USB drivers
https://code.google.com/p/usboblivion/
It will remove all USB drivers .
Click to expand...
Click to collapse
i removed all drivers by this and re installed drivers from flashtool folder. its still same as before.
use this tool for restore
I had this type of issue and I solved by restoring my phone on origional firmware with WMShua
It flash and repair I am in hurry so I cant give you its link but see you later you can search in browser typing perfact brush or perfact flash
PARESH AHAR said:
I had this type of issue and I solved by restoring my phone on origional firmware with WMShua
It flash and repair I am in hurry so I cant give you its link but see you later you can search in browser typing perfact brush or perfact flash
Click to expand...
Click to collapse
what was your device? smultron?? or something else?
mujib.sheikh11 said:
what was your device? smultron?? or something else?
Click to expand...
Click to collapse
my device is xperia mini st15i smultron
PARESH AHAR said:
my device is xperia mini st15i smultron
Click to expand...
Click to collapse
Great. I got the tools. Installed it as well. But the problem is the tool is not in English interface, its in may be Chinese or Japanese, in what i am totally illiterate about.
Can you help me a bit on this please?
I tried to flash the developer rom from here http://forum.xda-developers.com/redmi-note-3/how-to/miui-8-6-6-236-0-1-redmi-note-3-t3404890
MIUI8 DEV Release ROM :6.11.3 fastboot version but apparently used an old miflash tool version .
While trying to flash I got the "miflash not enough storage is available to process this command" error.
Now I cant start my phone, cant go into fastboot and Miflash does not recognize the phone, when I connect to pc, the notification light blinks red like if it was in edl mode but the flash utility does not recognize the device.
Booting into fastboot mode does not work, restarting normally also does not work
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
These kinds of posts remind me of what we risk modind our device. Try on another computer, there may be issues with .net framework or something.
redminote3 said:
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
I am using the same version right now,before I used an older one when I got the error.
I think I installed all the drivers, I will try to install them again including the mipcsuite.
But should I not be able to restart or boot into fastboot mode regardless whether the phone is recognised by my pc?
Also it was recognised in the beginning but not anymore.
redminote3 said:
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
So I installed the drivers again and my phone is recognized in device manager as Qualcomm HS-USB diagnostics 900e, I still dont see it in miflash and therefore cannot flash.
Try running edl.bat and then refresh miflash to see if its recognised as COM10
redminote3 said:
Try running edl.bat and then refresh miflash to see if its recognised as COM10
Click to expand...
Click to collapse
Should I create this file or where can I find it?
Any kind of help would be appreciated, because if nothing else works I will have to try the modified wire method.
I already opened the back cover to disconnect the battery for a while, didn't help, still cannot boot into fastboot.
If your phone is already in edl mode, what will wire method do for you?
Running edl.bat will require phone to be in fastboot mode.
Try this: half insert the usb cable, hold power+ both vol buttons and then fully insert the cable. Try this multiple times. This should force your phone into edl state if it already isn't... The use miflash to do the job.
I have a file through which u can enter edl mode using fastboot..if u Want I can share
I did the same mistake earlier and got stuck..adb couldn't recognize my device and was not able to enter edl mode...so I used fastboot mode to enter edl mode through a file provided on an XDA thread forum.xda-developers.com/android/software-hacking/guide-how-to-reboot-to-edl-fastboot-t3394292
hitesh1792 said:
I have a file through which u can enter edl mode using fastboot..if u Want I can share
Click to expand...
Click to collapse
The problem is I cant enter fastboot mode, I am apparently already in edl mode but miflash does not find the phone.
zsajak said:
The problem is I cant enter fastboot mode, I am apparently already in edl mode but miflash does not find the phone.
Click to expand...
Click to collapse
Did u update the Qualcomm driver??
hitesh1792 said:
Did u update the Qualcomm driver??
Click to expand...
Click to collapse
Yes, the device is also recognized by my pc as Qualcomm HS-USB diagnostics 900e, but not visible in Miflash, I tried several different versions
zsajak said:
Yes, the device is also recognized by my pc as Qualcomm HS-USB diagnostics 900e, but not visible in Miflash, I tried several different versions
Click to expand...
Click to collapse
R u using this MIFLASH tool??
en.miui.com/thread-281979-1-1.html
hitesh1792 said:
R u using this MIFLASH tool??
en.miui.com/thread-281979-1-1.html
Click to expand...
Click to collapse
Yes I tried this , also I tried the 201608 version
zsajak said:
Yes I tried this , also I tried the 201608 version
Click to expand...
Click to collapse
Can u give me a screenshot of what message does MIFLASH displays..
hitesh1792 said:
Can u give me a screenshot of what message does MIFLASH displays..
Click to expand...
Click to collapse
No message, its just absolutely empty , no device recognized.
zsajak said:
No message, its just absolutely empty , no device recognized.
Click to expand...
Click to collapse
What's your computer's OS? 32 bit or 64 bit?
hitesh1792 said:
What's your computer's OS? 32 bit or 64 bit?
Click to expand...
Click to collapse
64bit win 7
Is there a through way to cleanly remove all drivers including adb drivers? I hope its some kind of driver problem
I tried reinstalling the qualcomm driver in device manager but it didnt do anything.
zsajak said:
64bit win 7
Is there a through way to cleanly remove all drivers including adb drivers? I hope its some kind of driver problem
I tried reinstalling the qualcomm driver in device manager but it didnt do anything.
Click to expand...
Click to collapse
To recognize your device ur PC needs adb drivers...those get automatically installed once you connect your phone to your PC in normal mode or in fastboot mode...if you right click on my computer then click manage under device manager u will see android device under which it is written android debub interface...which means your device is recognized...
i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Maverick 101 said:
i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Click to expand...
Click to collapse
Try to check if your Fastboot drivers are installed correctly or not. Go to Device Manager in Your PC Properties and check whether your device is showing there in Fastboot mode or not? Only then you can unlock your bootloader and after unlocking you'll be able to proceed to Install and flash TWRP and Custom ROM's
No it doesn't!!! That's why i am searching for another way,
Maverick 101 said:
No it doesn't!!! That's why i am searching for another way,
Click to expand...
Click to collapse
Try Installing this.
https://forum.xda-developers.com/showthread.php?t=2588979
Tried it but it doesn't work
You need to connect your phone to usb 2.0 ports on your pc for the Mi Unlock / Flash tool to detect your phone in fastboot mode. If you don't have a usb 2.0 port, a usb 2.0 hub will also work.
Hope this helped.
Tried 2.0 also but no luck.
Maverick 101 said:
Tried 2.0 also but no luck.
Click to expand...
Click to collapse
It's just a connectivity issue, uninstall the drivers and retry everything from the start watching some guide on youtube.
It is normal, it happens some time, there is no other way to install twrp.
My poco has no os installed.
1) Fastboot and twrp booting, but when connected to pc, it shows error : " Usb device not recognised". So both adb and fastboot commands are out of reach.
2) MiFlash is not detecting the device
3) USB otg not detecting in TWRP
Is there any possible way to bring my poco back to life??
have you tried sd card? Are the drivers installed?
hidden.hero said:
have you tried sd card? Are the drivers installed?
Click to expand...
Click to collapse
not tried sd card yet. have to buy one first.
drivers are there but windows does not install them, even manually
Naveenjain said:
My poco has no os installed.
1) Fastboot and twrp booting, but when connected to pc, it shows error : " Usb device not recognised". So both adb and fastboot commands are out of reach.
2) MiFlash is not detecting the device
3) USB otg not detecting in TWRP
Is there any possible way to bring my poco back to life?
Click to expand...
Click to collapse
Uninstall current drivers and boot into fastboot mode. Connect the phone to pc and make sure you have an intel processor and a usb 2.0 port. Go into device manager and install the drivers from internet. This might solve your driver problem. As said above you can also try sd card.
callmebutcher101 said:
Uninstall current drivers and boot into fastboot mode. Connect the phone to pc and make sure you have an intel processor and a usb 2.0 port. Go into device manager and install the drivers from internet. This might solve your driver problem. As said above you can also try sd card.
Click to expand...
Click to collapse
Naveenjain said:
not tried sd card yet. have to buy one first.
drivers are there but windows does not install them, even manually
Click to expand...
Click to collapse
Try this and if the problem is not solved try another pc or linux. Because no need to install drivers on Linux
callmebutcher101 said:
Uninstall current drivers and boot into fastboot mode. Connect the phone to pc and make sure you have an intel processor and a usb 2.0 port. Go into device manager and install the drivers from internet. This might solve your driver problem. As said above you can also try sd card.
Click to expand...
Click to collapse
there is no driver installed currently...I have it downloaded, but windows does not install it
Naveenjain said:
there is no driver installed currently...I have it downloaded, but windows does not install it
Click to expand...
Click to collapse
Use another PC or Linux. And always use USB 2.0
hidden.hero said:
Use another PC or Linux. And always use USB 2.0
Click to expand...
Click to collapse
tried another pc, tried kubuntu. both don't work ?
Naveenjain said:
tried another pc, tried kubuntu. both don't work
Click to expand...
Click to collapse
is it the same error?
---------- Post added at 07:03 PM ---------- Previous post was at 06:59 PM ----------
have you tried adb sideload?
hidden.hero said:
is it the same error?
---------- Post added at 07:03 PM ---------- Previous post was at 06:59 PM ----------
have you tried adb sideload?
Click to expand...
Click to collapse
yes, same error.
adb and fastboot commands are out of reach, so sideload not possible
Have you tried wipe everything in twrp,fix context or repair partitions?
hidden.hero said:
Have you tried wipe everything in twrp,fix context or repair partitions?
Click to expand...
Click to collapse
yes, no help!
Try a SD card. I hope the problem is solved
hidden.hero said:
Try a SD card. I hope the problem is solved
Click to expand...
Click to collapse
tried...not detecting sd card. I'm so running out of options:crying:
Same problem with a new poco f1 on lineageos. What's wrong!
Have you tried a different usb data cable? I'd say this could be a bad cable, bad daughter board or a bad main board (micro crack). Had a redmi note 3 that didn't recognize sd cards at all for 2-3 years, it died abruptly a month ago. Have you tried a service center/repair shop?
Nicolas 4567 said:
Same problem with a new poco f1 on lineageos. What's wrong!
?
Click to expand...
Click to collapse
Just install universal adb drivers and uninstall all drivers else and try to connect in fastboot mode ! It should work ! If connected you can flash using miflash