Related
Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
rstalker said:
Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
Click to expand...
Click to collapse
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
THANK YOU! :highfive::highfive::highfive::highfive::highfive::highfive:
LOVE YOU MAN
PMT Corrupted & Format-all done
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
iZLeeP said:
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
Click to expand...
Click to collapse
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
HNaseer said:
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
Click to expand...
Click to collapse
Let me remind people, the first order of business must be to have a full firmware backup from the phone manufacturer or thru MTK Droid Root & Tools. Reading that you tried to resize your system & data partition, your cwm backup should not be affected by it. Try restoring to default the partition sizes using the app/script you used to resize. It should have that function. Then flash custom recovery and root and see if it works.
phone booting to main-screen or not?
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
spandrd said:
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
Click to expand...
Click to collapse
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Incredible.
Thank you so much. HAd almost given up hope...
How to connect mtk6582device (spice dream uno) in meta mode
Plz help me out guys ??????
I have a similar issue with my Unite 2 phone. I tried the format option too but I am getting STORAGE_ERROR
[Storage Error] The load and the target are inconsistent!
A Hint message is also there :
The load to be downloaded is for EMMC.
The Target storage is .
Please select a correct load according to the storage.
Please help me in resolving this issue. My phone model is Micromac unite 2 A106 8GB model.
syserr said:
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Click to expand...
Click to collapse
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
---------- Post added at 01:24 AM ---------- Previous post was at 12:26 AM ----------
hello guys
how can i format my device Blu studio energy 2 with sp flash tool my phone is dead after i do the format and i dont have firmware back up
thank you
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
syserr said:
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Omarod said:
syserr said:
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Try google, or search xda, or needrom.com...
This may or may not help you. If I were you I would use SPFT right now to try to backup your NVRAM partition if it's not too late. Your FORMAT may have wiped the NVRAM partition already. If it has wiped it, your only good path is to find someone willing to give you their NVRAM partition. Then somehow insert your own IMEI and WIFI MAC in and pray.
Click to expand...
Click to collapse
Could you tell me step by step what can I do coz I'm new in sp flash tool and. Mtk droid root and flash tool
Thank you so much
First find proper ROM on www.needrom.com
Hello Guys
still waiting for help please
Blu Studio Energy 2 -Backup file- firmware Please
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
funloft said:
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
Click to expand...
Click to collapse
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
sp flash tool error
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
funloft said:
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
Click to expand...
Click to collapse
can you access write memory section in your sp flash tool program?
huawei g610-u20 bootloop
George Jetson said:
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
Click to expand...
Click to collapse
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
sp flash tool error
George Jetson said:
can you access write memory section in your sp flash tool program?
Click to expand...
Click to collapse
yes, but it is asking me for raw data file....
funloft said:
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
Click to expand...
Click to collapse
Here is the link for stok rom u20
http://www.needrom.com/mobile/huawei-g610-u20/
huawei g610-u20 bootloop
the rom there is u20 with build B116, but the build for my phone is B121.... hope it will not affect?
huawei g610-u20 bootloop
please guys, help me out
FIXED
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
invalid IMEI
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Hello Friend
I was in error
nand flash not found
hellllllllllllllp me plzzz gays
need g610-u20 frimwaer for sp tool
bro plz give me a link for g610-u20 frimwaer for sp tool
lifegood8 said:
bro plz give me a link for g610-u20 frimwaer for sp tool
Click to expand...
Click to collapse
I can't post links yet, but you can Google it. Try typing "Huawei G610 U20 Needrom". You'll get links from Needrom.com, try look. Imgg for those. Once you're in the website, you'll most probably end up under G610's category. Try looking for the ones that say "official".
For you to extract the update.app file, try googling "Huawei Update.app extractor". The link you should look for should be from XDA Developers. You can then use it to extract the update.app file so that you can flash the .img files using SP Flashtool.
---------- Post added at 05:56 AM ---------- Previous post was at 05:50 AM ----------
funloft said:
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Click to expand...
Click to collapse
You can try using the Engineer Mode. Dial *#*#3646633#*#*, then swipe to the right until you're under "Connectivity" tab. Once you're there, go to "CDS Information".
funloft said:
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
Click to expand...
Click to collapse
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
ouro898 said:
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
Click to expand...
Click to collapse
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problemwhich i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
ouro898 said:
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
Click to expand...
Click to collapse
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
funloft said:
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
Click to expand...
Click to collapse
I was actually having problems making the sp flash tool work. It won't download after I plug the device to the computer. I'm doing the whole process correctly but I'm always getting an error. Then I found out that the mt65xx driver appears very briefly in Device Manager, then disappears. This all happens after about a second. Do you happen to know how to solve this?
Use mtk droid tools !!
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
RESTORE IMEI # USING THE NVRAM BACKUP !!! , in the MTK DROID TOOLS , COME OVER TO OUR THREAD FOR HUAWEI HONOR 3C
for more idea on restoring the nvram and IMEI which i accomplised
http://forum.xda-developers.com/newreply.php?do=postreply&t=2773098
Press Thanks !
Hello!
I have a GooPhone i6S Plus (Android 5.1) and I need a scatter file to flash the rom and the recovery.
When I try :
adb shell
cat /proc/mtd it gives me nothing...
And MTK Droid Tool does not detect my phone...
Nobody?
PhonyMonster said:
Nobody?
Click to expand...
Click to collapse
only MTK Droid Tools 2.5.3d for 64 BIT can detect this chipset remember this is not the official but modded to detect 64bit mediatek cpu only other function may not work
http://forum.androidurdu.net/showthread.php?tid=579
and you can also find scatter file from this link
http://androidurdu.net/mediatek-scatter-files-download/
if you are unable to find scatter emmc you can create your own by performing full backup via adb with commands but takes some time
hope this helps
Thank you but the seller provided me a new rom with the appropriate scatter file!
PhonyMonster said:
Thank you but the seller provided me a new rom with the appropriate scatter file!
Click to expand...
Click to collapse
can you give me a link of this scatter file pls
Hi,
what is Scatter file please ?
I'am French
I wanted TWRP or CWM on my smartphone Mediatek MT6735P
Thank you
PhonyMonster said:
Thank you but the seller provided me a new rom with the appropriate scatter file!
Click to expand...
Click to collapse
pls leak the scatter file and maybe the firmware too
Darkmo said:
Hi,
what is Scatter file please ?
I'am French
I wanted TWRP or CWM on my smartphone Mediatek MT6735P
Thank you
Click to expand...
Click to collapse
The scatter file provides physical sizes and memory address location (starting points) information for various file system components within an Android build. For example, a TWRP image needs to be loaded to a specific address point (recovery) in order to launch, and can not be so large as to overwrite the next required Android component. The scatter file provides the necessary information to Android at startup, since Android is really nothing more than a (very sophisticated) Linux shell program. This information often varies considerably from one device to another - especially with MTK chipset devices - and you really can't do a thing about installing alternative ROMs or recoveries without it.
Bon chance, mon ami.
Allview P5 Pro
Have a Allview P5 Pro which is bricked , dont have any back up or such , fact is i got the official ROM and scatter file for it but.....scatter file has name as MT6735M and the name on the EMMC Chip say MT8735V .
So i tried to use the scatter file that came with the ROM in a zip archive and SP Flash Tool gave me the "Storage Type Mismatch".
Tried to find a proper scatter but didnt find any , anyone can help me with that scatter file for my phone please? Thank you !
Darkmo said:
Hi,
what is Scatter file please ?
I'am French
I wanted TWRP or CWM on my smartphone Mediatek MT6735P
Thank you
Click to expand...
Click to collapse
try to port for your device,,i hade the same way bcoz none of the tools works for 6735 soc:crying:
---------- Post added at 02:59 PM ---------- Previous post was at 02:55 PM ----------
Xphones said:
Have a Allview P5 Pro which is bricked , dont have any back up or such , fact is i got the official ROM and scatter file for it but.....scatter file has name as MT6735M and the name on the EMMC Chip say MT8735V .
So i tried to use the scatter file that came with the ROM in a zip archive and SP Flash Tool gave me the "Storage Type Mismatch".
Tried to find a proper scatter but didnt find any , anyone can help me with that scatter file for my phone please? Thank you !
Click to expand...
Click to collapse
Download 3.XXX version of sp flash tool and run tool with admin previliges...should work...:good:
which sp flash can I use for my coolpad 7722 with mt6735p and again I flashed the whole phone include boot loader and now have blank screen, nothing displays
Cat /proc/partinfo
PhonyMonster said:
Hello!
I have a GooPhone i6S Plus (Android 5.1) and I need a scatter file to flash the rom and the recovery.
When I try :
adb shell
cat /proc/mtd it gives me nothing...
And MTK Droid Tool does not detect my phone...
Click to expand...
Click to collapse
cat /proc/mtd is for NON EMMC Device's or Old Devices... Use cat /proc/partinfo
ebenezer.sudheer said:
try to port for your device,,i hade the same way bcoz none of the tools works for 6735 soc:crying:
---------- Post added at 02:59 PM ---------- Previous post was at 02:55 PM ----------
Download 3.XXX version of sp flash tool and run tool with admin previliges...should work...:good:
Click to expand...
Click to collapse
Could you please put it on MediaFire or something like that and put the link here please? I bricked my phone about an year ago and I never found a scatter file to flash a firmware on it, so it's just bricked and I can't do anything with it. I flashed the wrong ROM and I forgot to check if there were scatter files available for it before flashing the ROM. If you could provide the file, I'd appreciate it (and many others, probably). Thanks in advance.
I got the scatter file from CM thread. But I cannot use it in SP cuz "initializing scatter file failed please check the name of scatter p9000 is legal".
Name is MT6755_Android_scatter.txt
SP latest version 5.1520
Dont know whats wrong and what to do. I got this device for $10 on GearBest in a competition. Didnt know flashing MTK devices is so difficult. Will stick to snapdragon from now on.
lucasho23121 said:
I got the scatter file from CM thread. But I cannot use it in SP cuz "initializing scatter file failed please check the name of scatter p9000 is legal".
Name is MT6755_Android_scatter.txt
SP latest version 5.1520
Dont know whats wrong and what to do. I got this device for $10 on GearBest in a competition. Didnt know flashing MTK devices is so difficult. Will stick to snapdragon from now on.
Click to expand...
Click to collapse
try installing latest sp flash tools, flashing mtk devices is easy just make sure you have latest version, correct scatter file, correct drivers, and correct firmware..
Ruben Craveiro said:
try installing latest sp flash tools, flashing mtk devices is easy just make sure you have latest version, correct scatter file, correct drivers, and correct firmware..
Click to expand...
Click to collapse
Did you flash CM too? I followed the instruction but when I hit the download button, SP does not load at all. Its frustrating cuz I dont see why cant we use adb instead of this MTK-specific SP flash tool
lucasho23121 said:
Did you flash CM too? I followed the instruction but when I hit the download button, SP does not load at all. Its frustrating cuz I dont see why cant we use adb instead of this MTK-specific SP flash tool
Click to expand...
Click to collapse
adb is used for pushing files, adb shell and other stuff, not to flash roms..(except adb sideload) ive flashed Aerom, i havent tried cm13, make sure your not using wrong scatter file, i think p9000 and p9000 lite have different scatters
I have got past the scatter file problem by shortening its name but then when I hit the download button, nothing happened.
I have installed SP driver pack, disable digital signing but when I try to install the VCOM driver, the installer could not install because the program wasn't signed.
lucasho23121 said:
I have got past the scatter file problem by shortening its name but then when I hit the download button, nothing happened.
I have installed SP driver pack, disable digital signing but when I try to install the VCOM driver, the installer could not install because the program wasn't signed.
Click to expand...
Click to collapse
Which version of Windows do you use??
The VCOM-drivers cant be installed in the Windows 10 Anniversary Update...
Easy!
Use some other directory (folder), e.g. C: or C:\Flash\. this will work.
Hi everyone. I ask you something ¿is there any way to flash a samsung stock firmware on brom mode (not in download mode, but brom mode)? If there is, ¿How can i do that? Thanks
Model SM-.....
is that samsung use mediatek? if so, find full dump firmware for your model and flash it using sp flash tool, you need bypass brom authentication first in order to flash
SM-A146U, processor MT6833
cuynu said:
is that samsung use mediatek? if so, find full dump firmware for your model and flash it using sp flash tool, you need bypass brom authentication first in order to flash
Click to expand...
Click to collapse
I tried already with sp flash tool, I know about bypass brom authentication; but I what I don't have is a reliable scatter firmware. I tried to convert any of the samsung roms I downloaded, into a scatter one, by using Android utility, but the generated scatter is useless, so i don't know if all the rest of "converted" files are reliable too.
Camilo Gil said:
I tried already with sp flash tool, I know about bypass brom authentication; but I what I don't have is a reliable scatter firmware. I tried to convert any of the samsung roms I downloaded, into a scatter one, by using Android utility, but the generated scatter is useless, so i don't know if all the rest of "converted" files are reliable too.
Click to expand...
Click to collapse
Can you send a picture of the download mode
windows4droid said:
Can you send a picture of the download mode
Click to expand...
Click to collapse
Sir, that's exactly the problem: There's no download mode. It's stuck on boot rom mode, so the phone it's just recognized as mtk device.
So, I tried to find a firmware scatter version for this phone, but besides what is a relatively new model, its storage is UFS, so any EMMC scatter file is useless, at least on sp flash tool. Someone has said me, I can flash it with unlocktool, but i'm broke and I cannot afford that program (and obviously if the phone is stuck in that mode, odin doesn't work).