Related
Instructions to enable USB Debugging mode
Start the Phone application
Type * # 84936 # – The numbers 84936 actually spell out TIZEN
Select Icon to enable Developer Option
Open the Settings application
Scroll to the bottom and you will see the new Developer Options submenu
Select the icon next to USB Debugging
How to take screenshots:
1. Press the HOME button + POWER button simultaneously to take screenshot
2. Connect your device to PC/Laptop via USB
3. Go to Phone->Images->Screenshots, copy the screenshot taken for this problem and attach to your bug report.
How to enable "CP Silent Log" on the device(for network issues i.e. calls, data:
1. Press this key combination *#9900#
2. Click on "CP Silent Log"
3. Select "[cp0] ON (ARM+DSP)
4. Exit this menu
5. Re-run the problem scenario
6. Please take log dump as per below procedure and share.
How to take logs from the device:
NOTE: If you are facing problems with respect to network scenarios(i.e. calls, data etc), please enable "CP Silent Log" before proceeding further.
1. As soon as you encounter the problem, press this key combination *#9900#
2. Select Run LOG_DUMP
3. Once this activity gets over, Connect your device to PC/Laptop via USB.
4. Go to Phone->SLP_debug.
5. Copy the file(s) in this folder(usually they are named log_dump_yyyymmddhhmmss.tar.gz) and attach to you bug report.
You can access the Tizen System recovery mode by pressing Home + Volume Up + Power button to power up
The recovery mode on Z3 has following options
1. Reboot System Now : Reboots normally without doing anything
2. Safe Mode : Only preloaded applications work in safe mode
3. Phone Reinitialization
4. Restore System from SD-Card
Soft Reset (this, i did not try yet):
Step 1:
Open dial pad.
Step 2:
Just type *2767*2878# or .*2767*3855#
Step 3:
Wait After few second the mobile device will reboot and smartphone is formatted.
http://developer.samsung.com/remotetestlab/rtlDeviceList.action
If somebody have no Z3...
SM-Z300H is now online available in RTL. :good:
Thanx.
Best Regards
RTL?!..
Remote Test Lab
Gear S2 and Samsung Z3 are now available!
On the 18th Nov, Samsung Z3(SM-Z300H) and Gear S2(SM-R730S) devices are added on the Remote Test Lab service. We're really pleased to provide you with new Tizen mobile and wearable devices.
Click to expand...
Click to collapse
Your thread title is nice...
So I have hijacked.
Best Regards
yeah, finally found out about RTL..
thanks! welcome aboard.
i am trying to start developing...
http://www.tizenappchallenge.in/
Welcome to the INDIA TIZEN APP CHALLENGE 2015
Here is a wonderful opportunity for all Indian developers to win big rewards for their App development skills. All you need to do is create new Apps on Tizen Mobile Platform or port your existing Android apps and submit them to the Tizen Store. You can submit as many apps as you want!
Click to expand...
Click to collapse
Only as info...
best Regards
@bogdan_wrc
Is it possible that sometime an android port is possible for samsung z3 tizen phone?
Update:
This phone has Spreadtrum SC7730S SOC platform
Please check this link:
The last line mentions this:
Overall, SC7730S chip set presents a high cost-effective platform for Android mobile devices.
So this soc is made for android, what are the chances for an android port for this device...? I am hopeful.
anything is possible...just to be a will..
but,why would you do that?
tizen is lighter...uses less battery. requires also cheaper hardware to use...
better than that...we should consider porting apps to tizen..
https://developer.tizen.org/development/tools/download#2.4
New SDK 2.4 Rev 1 available.
Release Notes:
https://developer.tizen.org/development/tools/download/release-notes/2.4-rev1-dec-1-2015
Note
Tizen 2.4 Rev1 SDK supports developing an application on multi-platform environments. In the 2.4 Rev1 SDK, you can also develop 2.3.1 based applications.
From Tizen 2.4 Rev1, the SDK image installation is not officially supported. Use the Tizen package server for installation.
- Download Tizen 2.4 Rev1 SDK : 2.4
- Download Tizen 2.3.1 Rev1 SDK : 2.3.1
Click to expand...
Click to collapse
Best Regards
https://developer.tizen.org/development/tools/download
SDK 2.4 Rev 2 is online.
Best Regards
Meanwhile on FCC are the internal and external Pics available from SM-Z300H... and few more PDFs...
Best Regards
link please?
You can search via FCC-ID
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Enter for Grantee Code:
a3l
Product Code:
smz300
Press search...
Best Regards
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647/page69
With this Tool it is possible to download Firrmware... to use with ODIN.
"Normal" and 4 parts Version for repair/study... :good:
Binary Nature have to be selected.
PIT file is for instance here:
http://www.easy-firmware.com/index.php?a=browse&b=category&id=6740
CAUTION!
4 part Version makes Factory Reset... INIT...
Because additional files inside:
Code:
system-data.img
user.img
Best Regards
https://wiki.tizen.org/wiki/SamsungZ3
Interesting.
Best Regards
Edit 1.
The Z3 can be rooted identically to the process for the Z1 (download a stock firmware image, extract it, mount the rootfs.img, and add "su" to the bin folder, then flash with Heimdall)...
Click to expand...
Click to collapse
:angel:
Oh... found something usefull about Tizen Kernel etc...
Thanx Google search.
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture1.pdf
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture2.pdf
http://nyx.skku.ac.kr/wp-content/uploads/2016/03/Lecture3.pdf
Best Regards
Edit 1.
Memo to me...
http://www.acmesystems.it/arm9_toolchain
Interesting read.
So, in theory it is possible to create custom image for say Z3, and install it with few steps!?
Vikram Dattu said:
Interesting read.
So, in theory it is possible to create custom image for say Z3, and install it with few steps!?
Click to expand...
Click to collapse
Yes it's possible in theory, but need time and some skills.
Sent from my SM-G930F using XDA-Developers Legacy app
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,
I want to open menu 'Testing'. I tried code *#*#6130#*#* and *#*#4636#*#* (*#*#INFO#*#*) in the dialer but they not work on my phone. I mean the window in which can choose 'Only LTE' mode. This window looks like image from attachment.
jamesbond22 said:
I want to open menu 'Testing'. I tried code *#*#6130#*#* and *#*#4636#*#* (*#*#INFO#*#*) in the dialer but they not work on my phone. I mean the window in which can choose 'Only LTE' mode. This window looks like image from attachment.
Click to expand...
Click to collapse
Hello
+1
Same question, i search but nothing works ! any idea ? :crying:
These all secret codes works on my phone:
Code:
About phone *#*#0000#*#*
Project menu *#*#2846579#*#*
Calendar info *#*#225#*#*
Google Play service *#*#426#*#*
IMEI *#06#
Only not work code for opening Menu Testing. Is it not installed or locked...?
Also I tried combination *#*#8378#*#* (TEST) and *#*#8378464#*#* (TESTING) and nothing happpens. I tried many codes founded in internet and many apps from Market and still I can't open Engineer Mode. I think that Engineer Mode is not installed on phone Honor 8X Max. :/
same problem with Honor 8c model BKK-AL10
FRP Bypass Samsung Galaxy S10 - 100% WORKING!
This method works!! No simcard is need to be inserted, no puk code is need to be used or other crap I have seen on alot of places, this is simple and a very easy way to frp bypass your samsung galaxy 10 without paying money for "pro" tools, this method is so easy so even your grandmother would succeed.
Totally there is three ways that I have found that allows anyone to bypass FRP very easy on the latest firmware (2020-03-14)!
One method is via NFC, the second option is via OTG cable between one android device on android v9.0 and your samsung s10 that is on android v10.0 and the third option is the most easy one so i decided to describe it for you all out there.
0. Turn off the device and remove simcard.
1. Enter recovery mode by keep device off and then press volume up + bixby + power button
2. Wipe cache and do a factory reset and then choose to reboot your device
3. Phone will now start as normal, change language to your prefered language
4. Take a screenshot at welcome screen with power + vol down, you will see "Allow samsung capture to access photos, media and files of your device" - Choose 'Deny' here.
5. Take another screenshot at welcome screen, an extra option that is 'Deny & dont ask again' - Choose this one this time
6. Now, take a third screenshot at welcome screen and you will get a totally different option, You will get a Allow Permission window popup instead now, choose 'Site Settings' here.
7. You will now get into Samsung Capture option, choose to allow permissions for storage if you want to be able to take screenshot, however the important part is to go to Permission option.
8. Now you should see 'Storage, Camera and Microphone, choose Storage' option here and then press on See all apps with this permission
9. Now press on the three dots in upper right corner and choose "Show System" option
10. There is many options you can choose here, let us browse down to "Google Chrome/Chrome" browser - Edit option from Deny to Allow and then press on see all Chrome permissions if you want to start chrome for example.
11. But even more interesting is that you will see settings icon at top, press on 'See all Settings permissions' - In next window just double click the settings icon at top for get to next window and now in down left corner - Choose 'Open' and you're in settings!
12. Scroll to bottom and press on 'about phone' and u will see "Reset" button, press on it to reset settings only and keep your data. (optional)
13. Now you just need download google account manager and add a new account and the old one will be overwritten (use web login in google account manager by pressing in upper right corner when you started account manager). If you want to join System UI just choose system ui in quickshortcutmaker.
quickshortcutmakercan be downloaded from: quickshortcutmaker
Pictures for those who prefer that can be found on my repo, click can be found on my github, click here for visit the repo.
Enjoy your fully unlocked Samsung Galaxy 10 device.
// wuseman
14 april 2020
I believe they fixed it. Is there any other method like going previous version and trying it again?
What's the furthest security patch
Up to what security patch does this support?
Does not work on A
download is offline....
speckdeckel said:
download is offline....
Click to expand...
Click to collapse
Fixed the url.
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
yeah "Add unlock FRP all version, all model (paid service)" really ?!?!?
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
very doubtful about this, is it possible to check the source code?
I don't see how it would work in practice, especially when it is not possible to use mtp commands (at the time of writing it is not possible afaik, not last week when I tried on s23) on the recent android phones
It might work on older models but hardly on today's, tell me more technical details how that tool work please?
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
-----
UPDATE:
It seems like OPPO caught onto this program. That MAC address is no longer accepted. However, there is a workaround (thanks to @Sonic Steven).
If you set the custom MAC on any adapters, remove it.
If you have the Secrecy program running, close it.
Disable any Ethernet/wired/virtual adapters, leaving only WiFi enabled. If you don't have a WiFi adapter, you may be able to leave Ethernet enabled, but it isn't guaranteed to work.
In Device Manager, click the root of the device tree (it should be your computer's name).
Open the "Action" menu and click "Add legacy hardware".
Click "Next" and select "Install the hardware that I manually select from a list (Advanced)".
Click "Next" again and select "Network adapters" in the list.
Click "Next" again. Once it loads, select "Microsoft" in the "Manufacturer" list.
In the "Model" list, select "Microsoft KM-TEST Loopback Adapter" (the name may be slightly different on other systems; select the one that has "Loopback Adapter" in the name).
Click "Next" twice to begin the installation.
Once the installation is complete, you should be able to reopen the Secrecy program and decrypt.
NOTE: The Secrecy program requires a working internet connection. It connects to OPPO's servers and performs some sort of authentication.
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
Click to expand...
Click to collapse
Thanks a lot (understatement) I will try follow your advice..
Does Unlocking the bootloader of Realme X3 SuperZoom, bricks the fingerprint sensor(Side-Mounted)???
Didn't passed step no. 13
I already tried but didn't passed step no. 13
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
Click to expand...
Click to collapse
I already tried but didn't passed step no. 13
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
---------- Post added at 12:46 PM ---------- Previous post was at 12:28 PM ----------
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
same Find X2 Pro sec5 dont show ok on the right side
hello
with oppo a9 2020;
does not work, I start the procedure with Sec5.exe it recognizes the device but does not give the ok; the same thing happens when you start secrecy.exe!
How can I solve?
@Zacharee1
I think this thread should be moved to https://forum.xda-developers.com/f/android-general.1424/, since it is not only for Realme X3 SuperZoom.
This solution is also applicable to RealmeC11(RMX2185).
credit to:
@Zacharee1
@HemanthJabalpuri
yeah i dont think this works anymore..
Sage said:
yeah i dont think this works anymore..
Click to expand...
Click to collapse
This works flawlessly in Realme C11.
HemanthJabalpuri said:
This works flawlessly in Realme C11.
Click to expand...
Click to collapse
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Sage said:
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Click to expand...
Click to collapse
Yes, see above post. https://forum.xda-developers.com/t/...ow-bootloader-unlocking.4136341/post-84091819
Got it working. Have NO MAC address listed in the Loopback and have at least 1 other network device active with internet access!
i thought you were supposed to have no internet adapter.
Also working on Realme 7 Pro, quick question, I'm already rooted with custom recovery, am I allowed to change the region without removing root and custom recovery?
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Does not work on realme 7 RMX2155 : ( . In depth Test app Failed to submit application is displayed
works on a realme 7 pro, thanks.
dynux90 said:
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Click to expand...
Click to collapse
how did you get it to work,,cause when i click on start unlocking my laptop screen just flashes,,but nothing happens on the sides of the secrecy autounlocker ,,a few trials here and there i was able to acquire a token from the software but when i input in my AuthTokenDecrypt it says signature doesn't match
Hye
Is This Still Working For realme 3 pro?