Hi all.
I own the above mentioned phone for some time now and I have a question for the forum.
The phone was purchased from Vodacom (Vodafone) in South Africa, their policy is to only sell single SIM devices.
So somehow the second SIM slot is disabled. What I want to know is if anybody has figured out how to reverse this and re-enable the SIM slot.
The phone is a Qualcomm variant and I came across a programme the other day on the MediaTek firmware website that can edit the IMEI number. My thought is that perhaps I could add the second IMEI to the phone which might make the firmware "see" the second SIM slot.
Does this sound feasible or even doable? Any advice is welcome.
I want someone more experienced than I am to give me some guidance before I try this so that I don't brick the phone and end up having to buy another one unnecessarily.
Thanks in advance.
Have you considered using MiFlash to flash an international version of MIUI to see if that gives you both sim slots?
Sent from my Redmi Note 4 using Tapatalk
Spukey said:
Have you considered using MiFlash to flash an international version of MIUI to see if that gives you both sim slots?
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
No. I have only now learned of MiFlash thanks to you.
I will search for it.
Come to think of it though, the ROM is largely untampered with by Vodacom (unlike the Samsung's they sell), so I don't think that's how they did the dual SIM disablement.
My previous phone, which my son has now, is a Samsung Galaxy J5 Prime. Its also dual SIM device, and I upgraded the ROM on it in order to achieve the same result.
My belief is that it's kernel related and not firmware. What I need more insight into is how the SIM slots are detected in the firmware/kernel in order to be able to enable them.
Related
I live in Canada and strongly considering buying a Redmi 3 Pro although the whole bootloader unlocking procedure is putting me off somewhat.....
First though i'd have to buy one, can anyone suggest which sites to check out that are reliable and trustworthy that stock this?
I also just have one question about unlocking, do i NEED to be posting on the Xiamoi forums to get my profile up to a score to get the unlock sms or is this unnecessary? Are there reports of people not getting the unlock code or being denied at all? Secondly to unlock i have to put a sim in the phone right? I wouldnt want to use this as my phone until i had it unlocked, rooted and CM14 installed so is there any issue using a UK sim, getting the SMS then doing the above before switching in my Canadian SIM? There is nothing that will tie to my UK sim on Xiaomi's end is there?
Just getting caught out with vendor rom that may cause you problems like no updates from xiaomi, I unlocked but I did create an account and had sim in the phone. If your going to unlock the vendor rom might be an issue, miflash to genuine rom then unlock. I'm using mokee rom nougat based on cm 14 and it's amazing. No problem getting the code came next day. Just told them I had vendor rom installed.
Hi Guys Im using a SM-G965N in the UK, when I try to register for the Pie Beta it give me the message "Your sim card doenst match the service provider software on your phone. This is common if you've changed service providers or if your phone and SIM card are from different country's" Im using the 3 network in the UK and the phone is LGu... Anyone have any work around..?
Anyone? I have exactly same problem. I got sm-g965n with LG Uplus carrier living in other country. Can i just flask stock firmware in my region to get rid of all the bloats and also is there a way for me to participate in pie beta? I can also swap this one with carrier unlocked SD845 version. Can i flash US stock on that one also?
Hi guys, I'm running into a similar issue with G965F device in Canada.
Here's what I've been able to piece together. Each device is a hardware variant and can use a specific set of firmware variants (sometimes called Multi-CSC). Your hardware variant is G965N. And if you look at sammobile for hardware variant, you can see the set of firmware available for this specific device. Unfortunately for you, there is ONLY Korean firmware for this hardware variant. For me, I have many more options but still no Canada!
It it completely inadvisable to flash the firmware onto your device that is not specifically tailored to your hardware. It's especially stupid when the firmware is tailored for an entirely different chipset (for example, Exynos firmware for Snapdragon hardware). But even if the devices use the same chipset, there may exist other hardware differences that will cause instability/errors/ bricks/unknown.
So as far as I can tell, we're all screwed. Have a nice day
Great news. I got into Pie Beta with my g965n. I was about to change my phone when i found LG Uplus sim card in my country. I put the sim card in and was able to register and download OTA. Now i am on android pie.
Nomado said:
Great news. I got into Pie Beta with my g965n. I was about to change my phone when i found LG Uplus sim card in my country. I put the sim card in and was able to register and download OTA. Now i am on android pie.
Click to expand...
Click to collapse
Send me the sim card.....PLEASE !!!! or tell me where you got it..
damonsk14 said:
Send me the sim card.....PLEASE !!!! or tell me where you got it..
Click to expand...
Click to collapse
I found it almost by luck. I was at this phone store when i randomly asked from a lady selling smart phones whether she had Lg Uplus sim card or not and she said yeah i got few. You can have one. That is how i found one. I wouldn't be able to ship it outside country without reliable shipping service in my country.
damonsk14 said:
Hi Guys Im using a SM-G965N in the UK, when I try to register for the Pie Beta it give me the message "Your sim card doenst match the service provider software on your phone. This is common if you've changed service providers or if your phone and SIM card are from different country's" Im using the 3 network in the UK and the phone is LGu... Anyone have any work around..?
Click to expand...
Click to collapse
Ran in to the same issue. Flashing in a Custom ROM helped.
https://forum.xda-developers.com/showpost.php?p=81856129&postcount=2150
Gamaka said:
Ran in to the same issue. Flashing in a Custom ROM helped.
https://forum.xda-developers.com/showpost.php?p=81856129&postcount=2150
Click to expand...
Click to collapse
which one custom rom did you flash ?
Graphite` said:
which one custom rom did you flash ?
Click to expand...
Click to collapse
Visit
https://androidfilehost.com/?w=files&flid=257743
Use SM-G965N files
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
gustavrsh said:
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
Click to expand...
Click to collapse
no
gustavrsh said:
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
Click to expand...
Click to collapse
not possible. also, is there not a CSC for your area you can flash instead?
I don't know why these guys say it's not possible, maybe it isn't with your model. I also don't want to give you any bad ideas or anything, so use your own discretion & research.
My phone was unusable when I did this, so I had nothing to lose when I did this (It worked though).
I easily flashed my canadian note 8 with a us firmware using modified odin (must be same version bootloader).
It has warranty status 0x0 (aka, Knox is NOT tripped).
AGAIN, I'm not advising you try this with your model, unless you know what you're doing. I just want to make the information available to you.
Edit: I'm just waiting for someone to upload snapdragon beta 3 one ui 2.0. I'm going to try the same method to convert my Canadian s9+ to USA version.
Edit 2: I can confirm this method works on my Canadian s9+ aswell.
Amb669 said:
I don't know why these guys say it's not possible, maybe it isn't with your model. I also don't want to give you any bad ideas or anything, so use your own discretion & research.
My phone was unusable when I did this, so I had nothing to lose when I did this (It worked though).
I easily flashed my canadian note 8 with a us firmware using modified odin (must be same version bootloader).
It has warranty status 0x0 (aka, Knox is NOT tripped).
AGAIN, I'm not advising you try this with your model, unless you know what you're doing. I just want to make the information available to you.
Edit: I'm just waiting for someone to upload snapdragon beta 3 one ui 2.0. I'm going to try the same method to convert my Canadian s9+ to USA version.
Edit 2: I can confirm this method works on my Canadian s9+ aswell.
Click to expand...
Click to collapse
Yeah I don't think it'll work on mine, since it's a single sim phone, and the ROM I wanted was for a dual sim version. Unless of course the hardware is the same and the second SIM slot is present. I could try, but I don't want to risk it. Maybe later when Sammy stops updating the phone.
Youdoofus said:
not possible. also, is there not a CSC for your area you can flash instead?
Click to expand...
Click to collapse
Unfortunately not. The SM-G965U1 is the US unlocked version. There are only CSCs for American carriers.
gustavrsh said:
Yeah I don't think it'll work on mine, since it's a single sim phone, and the ROM I wanted was for a dual sim version. Unless of course the hardware is the same and the second SIM slot is present. I could try, but I don't want to risk it. Maybe later when Sammy stops updating the phone.
Unfortunately not. The SM-G965U1 is the US unlocked version. There are only CSCs for American carriers.
Click to expand...
Click to collapse
if its truly unlocked, then you should already have the U1 firmware on it. Get modded Odin and the U1 firmware, flash it in Odin and go from there. I never looked back after ditching the carrier junk on my phone
Sometime ago I did somethinh like that on my Arabian S7 Edge that I bough in Paraguai, it was Dual Sim model and i flashed ZTO CSC via Odin, and the phone was working well, but i'm not sure if the reverse works, and even the models were similar (F vs FD version) in your case u have 965U vs 9650, I would not take that risk, i thing that a korean or chinese model is 9650 too
look at this picture, US version has more bands so the modem could be different, you can try but you're risking your phone
davenasc said:
look at this picture, US version has more bands so the modem could be different, you can try but you're risking your phone
Click to expand...
Click to collapse
yep, they are different phones that just so happen to use the same processor. Different bootloader, same chassis for whatever reason. Anyways, there have been threads talking about converting the 9650 to a 965u, but ive never seen anyone confirming that it indeed works. Big risk, but as long as one can get back to Odin mode, one should be good.
Can I flash a dual SIM firmware onto a single SIM phone
hello, i need help please... my samsung s8 doesnt receive updates. i have tried searching for the firmware i can use to flash it but no luck. my s8 is sm g950f and my region is nigeria. the phone has been stuck on oreo since i got it.
marv108 said:
Can I flash a dual SIM firmware onto a single SIM phone
hello, i need help please... my samsung s8 doesnt receive updates. i have tried searching for the firmware i can use to flash it but no luck. my s8 is sm g950f and my region is nigeria. the phone has been stuck on oreo since i got it.
Click to expand...
Click to collapse
Did you flash the dual sim firmware onto you single sim phone in the end? If so, what works and what doesn't work? I'm in a similar situation, but the reason why I'm asking is because I want to get VoLTE working in a specific country. The variant of the phone that is sold in that country is the FD variant whereas mine is the F variant - which was purchased in a different country.
Hello, looking for some help to see if anyone can help me find the firmware of my A526U specifically for AT&T? I have moved my phone over from TMobile where I purchased it from, and am looking to re-flash it to AT&T. Was working fine for a few months, now I'm no longer able to make or receive calls.
After inserting the new AT&T SIM card, the TMobile splash screen still shows up. The Service Provider software version reflects TMobile still as well and I'm concerned that for whatever reason the phone did not fully update after inserting the new SIM. I spent 2 hours on the phone with AT&T support after the store said they couldn't help me. Pulled the SIM card out, restarted phone, put it back in, reset network settings etc. I've searched sammobile and I cannot find the AT&T firmware, only TMobile, Sprint, and TMK. I would sincerely be greateful please if anyone could help me by pointing me in the right direction for the firmware for this model phone.
AT&T doesn't make their firmware available publicly - for any device. I have a source who can get me Samsung firmware for any USA device - even AT&T. But he charges me for each one
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
aschaffer35 said:
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
Click to expand...
Click to collapse
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
iBowToAndroid said:
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
Click to expand...
Click to collapse
Thank you very much sir! I shall give this a go this weekend! You guys rock!
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
blackhawk said:
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
Click to expand...
Click to collapse
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
iBowToAndroid said:
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
Click to expand...
Click to collapse
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
blackhawk said:
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
Click to expand...
Click to collapse
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
iBowToAndroid said:
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
Click to expand...
Click to collapse
The old firmware works fine on 4G VoLTE... that's likely not the issue. What is the issue is it wasn't running on 4G VoLTE so it's likely the settings and sim card need updating not the firmware.
Hi All, thought I would provide an update... After spending hours on the phone with AT&T support this week and being frustrated with the AT&T store, I decided to proceed forward with flashing the U1 version. What started this all was last week my son could no longer make or receive calls on his AT&T A52 phone (we ported it from TMobile September 2021). The store and AT&T advanced tech support said there were issues with people's BYOD devices, even though the A526U and A526U1 shows on the supported devices list. The store rep said he's been getting people in left and right that can't make or receive calls, and all they can do is upsell customers to an AT&T branded phone.
SO... my son's phone was on A526USQS4CVA6. Startup screen showed TMobile still, even with the AT&T SIM card in it. I proceed to flash the A526U1OYM4CVB2_ATT that I found from Sammobile. Was hoping someone had just the "U" version but I couldn't find this anywhere. When doing the flash, I used the Home_CSC file (I had to download a patched version of ODIN as it was stuck as setting up connection) and when it finished it would just keep going back to the download screen on the phone and I freaked out. I did some more research and decided to flash again using CSC instead of Home.CSC (I did a backup using smart switch on my PC luckily). This WORKED! I'm guessing because the software version he was on was different than what I was trying to flash too so maybe this is why I needed the CSC for a clean flash (there was no user data file that downloaded from SAMMOBILE).
Now, calls are working on my son's phone again! AND his service provider software version now reflects ATT vs TMB! Man this has been one heck of a journey lol. I've seen numerous forums on google of people having the same trouble with me, their BYOD devices not working. Seems a flash of U1 worked for me, so hopefully this helps others out there!