Hello.
I am having a problem flashing G965U1UEU3CSA8 onto my S9+. I am currently on the ZRLG beta build. I was not able to receive the beta OTA so I manually flashed it. I have tried to no avail with both of my laptops (just moved; so no workstation at the moment) and with my friend's laptop.
The problem with all of our laptops is that the hubs are USB 3.0/3.1. Whenever I try flashing with Odin with the phone in download mode, Odin just stops at the "Setupconnection" phase.
- I have downloaded the Samsung USB drivers
- I enabled USB debugging
- I am running Odin as an administrator
- I've tried all of the ports on each of the laptops
- I have tried 3 authentic cables from Samsung; 2 in new condition and 1 that was used daily
- I attempted to do an emergency recovery via Smartswitch but that fails too. Smartswitch states that a connection could not be established in order to transfer the firmware
- I should add that the phone is being recognized whether by Odin or by Smartswitch. It is only when it's time for the flashing to commence where things start to go awry
So, essentially, what I need to know is: is there any way to build a zip to sideload via ADB as a workaround in lieu of a computer with USB 2.0 ports?
Related
Help Please. I plug my phone in and have Odin up but it doesnt come up with the yellow box or anything in the left corner so that i can send stuff to my phone. How do i get it to come up in the left conner?
You need to make sure that you have the Samsung USB drivers installed on your PC in order for Odin to detect the Phone. Additionally, I found that using Odin3 v1.00 is easiest.
where do i get that?
i got the samsung usb driver and tried again and i still dont get it on odin
I know that hen I downloaded the most recent version of Odin I was having issues with connectivity with my vibrant.
However, I reverted to using odin3 v1.00 instead of the latest and it seems to communicate perfectly for me.
- Use different ODIN versions.
- Reboot computer after installing drivers
- Reboot phone and then connect it to computer
- Try on another computer
- Try another port
- Try another USB(this works for very few)
Hey everyone,
So, I rooted and flashed my SGS2 back in july... everything went perfectly... but the Asus that I used to flash has been sold, and since I flash using CWM, not odin, I had not even realized this.... until I had to root and flash my mom's i9000m
My new HP is having a really hard time trying to detect any of my android devices. Here is what I tried:
- USB debugging is most certainly on
- Putting phone in download, plugging into laptop, letting install drivers - NOTHING in odin
- Finding the samsung usb mobile device drivers on tutorials on the internet - NOTHING in odin
- Installing kies, letting that install drivers - still nothing in odin or kies
- Try different USB port
- Try different USB cable
- Try pulling the battery and sim
It definitely is not the phone, because my SGS2, or my parents S vibrant or S captivate are detected by kies or odin. Also I can get a connection to storage when phone is on, ect.
Is there anything I missed? This new HP is starting to piss me off lol. Everything went to smoothly on the Asus.
did you turn off usb debugging. it interferes with the connection
settings - applications-development.
If I turn off USB debugging and enter kies mode while the phone is on (normally) it will say Connected...on the phone, but my laptop does not detect anything, kies is still waiting for a connection.
Ideally I want USB Debugging on, as I want to connect to odin, not kies. But as neither is working... I figured I would just see what I could get to connect.
SGS2 Connect
Power off phone
Install Kies
Power on phone start Kies connect Samsung USB cable .
Let Kies find phone .
NO
Then try Kies not running put phone in USB Mass storage mode connect cable wait for windows to find USB mass storage device and install drivers .
jje
Turns out there was an issue with my android SDK installation. Reinstalled it and re downloaded drivers. Everything works! Thread closed!
Thanks for the suggestions
So the ota screwed up my phone. I was able to connect and intstall the stock eoh3 for xda the phone now starts up but I am unable to connect USB to root or flash any new rooms with Odin I can only connect Odin if the phone is booted up and debug and mock locations are on. If I pull the battery and put it in download mode it will not connect to the pc it just shows as an unknown device. I have reloaded drivers ect but not getting anywhere. Any ideas?
Try another cable if you have one, and try putting the drivers on another PC. For reasons I still haven't figured out, my home desktop PC quit connecting a couple of ROM's ago, and it won't even let me reinstall the drivers. I have a laptop that works fine (so I haven't gone into major troubleshooting) and my work PC also connects fine.
If the same issue repeats on other PC's and cables, there may be something wrong with your mini USB port. I had to have mine replaced a few months back.
When simply powered on, Odin will recognize my tab (10.1 WiFi Only 7510). But will not recognize in DL mode... grrrrr. Any suggestions?
Have you tried to uninstall and reinstall the drivers on the PC?
Yes, I did. Reinstalling the drivers did not work. I tested with USB debug off, this did nothing in Odin either.
kamgrn said:
I tested with USB debug off, this did nothing in Odin either.
Click to expand...
Click to collapse
Of course it wouldn't; toggling a USB debug setting on the device while booted into it's operating system will have no affect on how the device is going to work in download mode as download mode is completely independent from the operating system itself. It's like comparing a PC's BIOS to an installation of Windows or Linux on the PC.
Your issues with Odin and download mode are most likely on the PC side and NOT on the tablet side. The Samsung drivers are very temperamental. Sometimes they don't play well with other devices and sometimes they don't work well with certain chipsets or USB controllers. My suggestion is try different USB ports, avoid using USB HUBs and try reinstalling drivers as well as disabling antivirus on the PC temporarily.
It may even be advantageous to have device manager open while you connect the tab in download mode to see how the PC is recognizing it. The tab should never be connected while you're attempting to get into download mode, leave it disconnected and have Odin fired up and prepped until you get the tab in download mode. Seeing how device manager picks it up might help diagnose driver issues.
same problem, varios computers
Hello everyone! I also have this issue whereas my gt-p7500 dont even exists to the system in download mode. I tryed 3 computers so far, even on linux in download mode heimdall wont recognize the tablet. what I have done so far:
(on 1st pc win7)
- installed kies, and updated to latest version. On normal mode the tablet gets recognized, all drivers install throught the end, kies works fine, managing folders and files as storage device also works fine.
- turned on usb debugging, and connected to pc again. A new driver MPC is installed, kies still works, pc communication also.
- rebooted the device in download mode, and after this conected again to the pc. Nothing new is detected.
-- Odin can see the device on normal mode, and if its turned off (charge mode) but on download mode nothing happens.
(on 2nd pc, win 7)
- didnt install kies, only samsung drivers
- inserted the tablet in 3 ways on the cpter, normal node, normal mode with debugging on, and download mode to all new devices and drivers to be detected.
- odin dont work on download mode, but can see the tablet as the example above, normal mode, normal mode with debug on and turned off (charge mode)
(3rd pc, debian 64)
- installed heimdall via git, latest package. Also wont detect the device on download mode, whereas it can see the tablet on normal mode.
on 3 pcs, tryed ALL usb ports, tryied openning odin first, and then connecting the device, tryed conecting the device first and then openning odin... nothing works while in download mode.
also Iv reseted the device to factory defaults to test, nothing changed.
On the first pc iv also tryed downloading older drivers versions from samsung, spreaded all over xda foruns on other threads. the oldest version Iv tryed was 1.4.x,
Please helpe me on this, cant figure out how to get the device detected in download mode on the pc... getting very annoyed on this already, and tryed all the possibilities I could imagine so far.
Are you using a laptop? Bcz pc can iddntify. I also had same problem with my laptop. It was recognizinging it as media device but not in download mode. So try to cknnect it to the CPU of the Pc
HIT THANKS WHENEVER POSSIBLE OR IF I HELPED YOU...
Not necessarily computer related, past experience for me has shown that not all versions of Odin work with this tab......the newer versions are NOT so good
Try this version uploaded and these drivers - try odin first if you are sure of your drivers, otherwise install the drivers first
Let us know how you go....
stinky73 said:
Not necessarily computer related, past experience for me has shown that not all versions of Odin work with this tab......the newer versions are NOT so good
Try this version uploaded and these drivers - try odin first if you are sure of your drivers, otherwise install the drivers first
Let us know how you go....
Click to expand...
Click to collapse
Hi
I had the same issue and those files solved it
Thank you
Samsung Galaxy TAB P1000(Ordin detection in DOWNLOAD MODE)
Initially google SAMSUNG_USB_Driver_for_Mobile_Phones_x86 . Download the file in your pc or laptop and install it. Then switch-off the tab and Press power and Volume down button simultaneously to get into the download mode. This time Samsung tab would be detected in the Ordin.
Hi I have galaxy tab 10.1 GT P7510, Odin don't recognize
After an extensive search of XDA and other forums - I am wondering if anyone has suggestions for a situation in which my PCs (one that is Win7Ultimate and one that is Win8Pro) will only recognize my recently acquired, used Galaxy Tab 7510 when the Tab is placed in "download" or ODIN mode.
Thankfully, I can install CWM recovery and flash other ROMS because the PC's recognize the Tab 7510 when I place it in "Download" mode and use ODIN to flash.
Thankfully, I can use apps like WiFi File Transfer to successfully move files between my PCs and my Tab 7510.
However, I'm completely befuddled about why - when I connect the Tab 7510 to the PC in ordinary operating mode - there is no recognition of a USB connected device at all. Nothing shows up in the Control Panel's Device Manager, nothing shows up in the Windows USB Taskbar notification - from the perspective of the Windows machines there is nothing attached to the PC. I've tried all the tips I've seen written about on this and other forums (uninstalling and reinstalling drivers, trying other USB ports, trying other cables. making sure MTP is checked in settings, making sure USB debugging is/is not checked in settings). None of these has changed the outcome. My PC does not recognize (not at all) the Tab 7510.
But, as soon as I go into "Download" mode on the Tab 7510 - using exactly the same cable plugged into exactly the same USB port - the Tab is recognized and I've flashed three different ROMS (trying different versions of Jelly Bean) and flashed CWM three times and flashed stock ROM twice via the "Download" mode using ODIN on the PC.
Thus, I know that a connection can exist between my PC and Tab 7510 and that the cable and USB ports do work - just not when I'm out of "Download" mode.
Any thoughts or ideas on what the disconnect may be?
Do You have Kies installed to Your computer, earlier on I had the same kind of problem and uninstalled Kies totally, also every
registery traces, and the problem was gone.