So i have a problem with my Suunto smartwatch. It always disconnects from bluetooth after a while. I use Movescount app for it and it disconnects. Any ideas? I tried to make it not close, and exclude from battery saving options.
Have something similar but with huawei band watch.
It gets disconnected, likewise I have made the watch band app keep active in background, I have not set up any battery customisation etc to run. Yet still gets disconnected.
superior888 said:
So i have a problem with my Suunto smartwatch. It always disconnects from bluetooth after a while. I use Movescount app for it and it disconnects. Any ideas? I tried to make it not close, and exclude from battery saving options.
Click to expand...
Click to collapse
You can try adding this program to the protection program.
Go to Settings > System > About phone or Settings > About phone to check the EMUI version of your phone. If the version is EMUI 8.0 or later, perform the following steps:
1.Go to Settings > Battery > Launch to find the app for the wearable device, and disable all Manage all automatically switches. On the Manage manually screen, enable all three switches: Auto-launch, Secondary launch, and Run in background.
2.Open the app for the wearable device, then touch the Recent key or swipe on the Home key to display the recent tasks screen. Find the wearable app, and touch the Lock icon on the top to lock the app.
Note: Make sure you are using the correct app for your wearable. For example, if you are using a Huawei Watch, select the Wear OS app.
This settings solved my problem.
Using Garmin Fenix 3
Thanks it seems to work now. Been steady for 2 days. Hopefully it keeps going.
Skickat från min Pixel 3 XL via Tapatalk
Hi, I use Garmin fenix with Garmin Connect and in my case the solution above doesn't work. Fenix is diconnecting and don't connect again. With P20 Pro it was working perfect. Any idea?
Related
I have two Gear Fits connected to two non-Samsung phones (Nexus 4 and a Sony Xperia Z Ultra). Both have the same issue where most notifications will not show details, but just a message of: "For details, view this notification on your mobile device."
There seems to be no consistency of when I may or may not get details. Sometimes it shows it for a bunch of notifications in a row, but once it stops working, I have no idea when it might start working again. Anybody else have this problem and any ideas?
Additional info:
Gear Fits on firmware NG2, Gear Fit Manager 1.70
I have the same issue as well and no idea why it happens, I usually try to restart the phone and I think it gets back to working
Sent from my Nexus 5 using XDA Free mobile app
I used to have this issue. It occurs when the host fit is connected back to the device after any loss of connection. The guy works everytime. Once you connect fit to phone, go to gear manager app, notifications, use the switch at the top to turn off all notifications. Wait 5 sec, turn notifications back on. Will be fine until next time fit disconnects. So repeat with each connection.
Sent from my Nexus 5 using XDA Free mobile app
solve the problem
When u lose connection
Close bluetooth
Open bluetooth
Open the gear manager app
I use automatelt to automate that to reconnect and fix that problem
Works 99% of the time
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
montarelonf said:
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
Click to expand...
Click to collapse
Yes, it happens when BIP trying updating A-GPS data. Run MiFit, keep watch close phone and let him update. Sometimes is failed, but close MiFit, clear memory and try again until success.
Thanks a lot.
In fact, it must be something related to what you say, becasuse as soon as the clock was recovered and connected again to the Mi Fit, it began to update the A-GPS.
What I do not know is if the solution you proposed works, because while it was blocked, the Mi Fit did not recognize it (it always put Connecting ...), it did not connect and I mismatched it and then I could not find it to link it again. That is, there was no bluetooth connection between My Fit and Clock, so I do not know how I could have updated the A-GPS clock trough the Mi Fit
Fortunately, the clock went off and when I put it to charge it started well and it works.
Hi there,
since today i have got the same problem. Sadly the battery is charged 100% so waiting for discharge may take some time. Does somebody know how to reset or force reboot or force discharge the watch?
Thanks in advance!
Amazfit bip problem
Hi, i got exactly the same problem with you..
After i switched my smartphone (from huawei P9 to LG V20) My amazfit Bip suddenly updating A GPS and after that, the touch display is hardly responding, then when i long press the button, it start to displays workout session that cannot be stopped or interrupted in the meantime, Mi Fit can not sync/interract during workout session).
After spent several frustating days, finally i conclude that the main issue is the firmware.
So here is what i did :
- Let the Amazfit watch battery drain (since the activity/workout session can not be stopped, it will drain faster than ussual).
- Recharge the watch until more than 10% and re-connect it to Mi Fit app. (Don't charge it too long, because when something goes wrong you will have to take time to drain the battery again).
- Download NOTIFY & FITNESS FOR AMAZFIT" app from google playstore and connect your Amazfit with the app.
- When the Amazfit Bip paired to Notify & Fitness For Amazfit,
unpaired the watch from the Mi Fit App, then uninstall Mi Fit from your phone.
- Now you have only 'Notify & Fitness for Amazfit' app connected to your amazfit bip.
.- Go to setting section in the app, scroll down and you will find firmware update section, then update the amazfit firmware (you will find some option : english/spain/italian etc., i've choosen english version)
- There imare 3 items that you have to sequintly update one by one : firmware, recources and gps (i failed to update the gps, but all i know, it doesn't matter anyway...)
- After the update finished (sometimes it failed, but i repeat it on and on untill it's succeed), my amazfit starts to work proper and not displaying work out session anymore.
Notify & Fitness for Amazfit is my saviour!
It works better than the official Mi Fit app.
Blocked after Workout
I also had a blocked Amazfit Bip:
On my first workout (a 3 hour bicyle ride), I wanted to stop it. Unfortunately the watch always restarted the workout again.
First I thought that I had double tapped the screen after pressing the Ok (to finish) button. But I tried this for at least 30 times. It always restartet the workout.
I still got a connection from the Mi Fit App, but it told me that the watch is within a workout.
I disconnected / reconnected the MiFit App several times and somehow I was able to quit the Workout.
I immediately switched off the watch, restarted and everything was fine again. No new firmware flashing was required.
I only have it since two days.
[Firmware 0.1.0.26]
Hi all,
i have a problem with receiving notifications on my Amazfit pace watches. The problem is, that notifications are coming only for a few minutes after restarting my phone (sometimes even restarting of the phone doesn't help). Moreover, I've noticed, that notifications seems to be working when the phone is charging. What I have tried so far:
Unpair and pair my watches
Clear cache
Restore of factory settings on the watches and on the phone
Set Amazfit app to ignore battery optimizations and app has permission to receive notifications
My phone is Huawei P9 Lite 2017 (PRA-LX1) and the phone is running Android 7.0 and EMUI 5.0.3. Amazfit app is the latest version from Play store and the watches' rom is 1.3.8a. Any ideas what could be wrong?
Thanks.
1. Make sure you don't have any settings on phone or app that is killing Amazfit while it's in the background. Some customized versions of Android have very aggressive battery settings, you must remove Amazfit app from them. Some even disable Bluetooth to save battery, it must be on all the time as well. It seems the case because you said it works while phone is charging...
2. Some Huawei phones are known to have WiFi/Bluetooth problems. You can try to put phone in Airplane mode and enable mobile data and BT separately and see what happens.
lfom said:
1. Make sure you don't have any settings on phone or app that is killing Amazfit while it's in the background. Some customized versions of Android have very aggressive battery settings, you must remove Amazfit app from them. Some even disable Bluetooth to save battery, it must be on all the time as well. It seems the case because you said it works while phone is charging...
2. Some Huawei phones are known to have WiFi/Bluetooth problems. You can try to put phone in Airplane mode and enable mobile data and BT separately and see what happens.
Click to expand...
Click to collapse
Thank you for the answer.
1. That was the first thing I did, but without success. However, I did not find an option to disable/enable Bluetooth in order to save battery. Previously, I had Mi Band 2 and it worked flawlessly.
2. I can try that and see what happens.
EDIT: No luck with option 2. Notifications still not coming.
*Bump* Anyone with the same (or similar) issue?
Hello I am facing exactly the same problem. Notification delay even in calls. It's very annoying the fact that the notification appears after the finished call.
My phone is huawei nova with Android 7 and emui 5.0.3
Στάλθηκε από το HUAWEI CAN-L01 μου χρησιμοποιώντας Tapatalk
during 2 sessions over 10
the running app crashed
I got the last official ROM
any hint to go to debug mode on the watch and send data back to amazfit ?
Settings -> Report error
But try to disable all alerts in activity Settings, it may prevent crashes.
thanks you
but I use alerts to keep HR in the "right" range
any other way to run in a good HR range using amazfit ?
thediago said:
thanks you
but I use alerts to keep HR in the "right" range
any other way to run in a good HR range using amazfit ?
Click to expand...
Click to collapse
You can see the HR on screen, it also shows the zone. Try disabling all alerts and then enable then one by one, I think HR zone doesn't cause problems, I know pace alert does.
I had a Ticwatch E before switching to the mix 3 but using it on the mix 3 now I've had so many connectivity issues. Sometimes I'd get notifications and then sometimes the watch would disconnect, just wondering if anyone is using a smart watch that doesn't have these issues or if this is just an issue with the mix 3 and ticwatches.
Thanks
My moto 360 1st gen has also some issues.
Gesendet von meinem MIX 3 mit Tapatalk
I have Huawei Watch GT, no problems at all.
No problems at all here with a Huawei Watch 2 Classic
Amazfit Pace and no problem
Dont know what happens but now All Apps works and the notification grafics are now perfekt again. No more Problems with transpatency
Gesendet von meinem MIX 3 mit Tapatalk
I had some connection issues as well.
I figured out that it only loses connection when I kill all apps and so i tinkered with a few settings:
- disable power-saving for wear OS app
- enable auto start for wear OS
It still loses the connection if you kill all apps but reconnects as soon as you check your watch.
It never loses the connection if I don't kill apps (anymore?).
Hope that helps!
prozac192 said:
I had some connection issues as well.
I figured out that it only loses connection when I kill all apps and so i tinkered with a few settings:
- disable power-saving for wear OS app
- enable auto start for wear OS
It still loses the connection if you kill all apps but reconnects as soon as you check your watch.
It never loses the connection if I don't kill apps (anymore?).
Hope that helps!
Click to expand...
Click to collapse
Open recent apps, long press Wear OS app, and tap on the lock, now, even if you kill all apps, Wear OS won't be killed
Williammmm said:
Open recent apps, long press Wear OS app, and tap on the lock, now, even if you kill all apps, Wear OS won't be killed
Click to expand...
Click to collapse
True, but than you have to open the app in general while it is never actively opened otherwise.
Same thing with automatic started music that gets killed, even when you don't have your player open.
I've got the Galaxy Watch (46mm) and I am able to use it but with a caveat; if you unlock the bootloader you MUST root with Magisk in order to hide the fact that the bootloader is unlocked. Otherwise, the Galaxy Wear app and Samsung Pay with not even open, and you won't be able to connect the Galaxy Watch to your phone. If you keep the bootloader locked and don't want root access, it works normally.
I have a Gear 2 I flashed with Android Wear and it's been working perfectly.
My Watch GT doesn't automatically reconnect after I go out of Bluetooth range.
I've whitelisted all apps from the MIUI battery saver and granted all permissions.
I have also LOCKED the Huawei Health app to stop the system from closing it.
Once Bluetooth has disconnected, The ONLY way to get the watch to reconnect, is by opening Huawei Health or toggling the phone's Bluetooth off & on.
Unsure if it's the Huawei Health app or MIUI that is at fault.
Very frustrating.
Also using a Galaxy Watch (46mm) and it works great for the most part. You do have to root with Magisk to hide the unlocked bootloader (if you unlocked it). Other than that, for some reason I lose notifications on the watch almost every time I reboot the phone or put it in battery saver/extreme battery saver. This has something to do with the way MIUI handles notification access and is very annoying since the only way to fix it is to disconnect the watch from your phone (as in unlink it which wipes the watch NOT just turn off bluetooth), uninstall the Galaxy Wearable app completely, reboot, then re-install the Galaxy Wearable app, reconnect the watch, and restore my backed up data to the watch. It only takes a few minutes now that I know exactly what fixes it but it is really annoying that I avoid using battery saver and rebooting just to not have to deal with uninstalling and reinstalling the watch. If anyone has any better fix for this please let me know lol.
Does anyone use a FitBit? My wife bought a FitBit Versa and it constantly shows and error about the notifications not being available. She has to constantly reboot the phone to get notifications working correctly.
Rockmadeofrock said:
Also using a Galaxy Watch (46mm) and it works great for the most part. You do have to root with Magisk to hide the unlocked bootloader (if you unlocked it). Other than that, for some reason I lose notifications on the watch almost every time I reboot the phone or put it in battery saver/extreme battery saver. This has something to do with the way MIUI handles notification access and is very annoying since the only way to fix it is to disconnect the watch from your phone (as in unlink it which wipes the watch NOT just turn off bluetooth), uninstall the Galaxy Wearable app completely, reboot, then re-install the Galaxy Wearable app, reconnect the watch, and restore my backed up data to the watch. It only takes a few minutes now that I know exactly what fixes it but it is really annoying that I avoid using battery saver and rebooting just to not have to deal with uninstalling and reinstalling the watch. If anyone has any better fix for this please let me know lol.
Click to expand...
Click to collapse
No problem using the Galaxy Watch with unlocked bootloader, not rooted. Using Xiaomi.eu rom.
dunjamon said:
Does anyone use a FitBit? My wife bought a FitBit Versa and it constantly shows and error about the notifications not being available. She has to constantly reboot the phone to get notifications working correctly.
Click to expand...
Click to collapse
I bought the FitBit Versa and had to return it due to notifications never working, even with all battery saving options disabled it just didn't work. Picked up the Galaxy Watch Active instead and that works perfectly, I'd recommend it instead if you still have the option of returning the FitBit. Used it with MIUI at first which worked perfectly after disabling the battery saving features.
I'm now rooted with Pixel Experience, had to download an older version of Samsung Pay to get it to work without detecting root and it's working great on that too.
SamLovesJam said:
I bought the FitBit Versa and had to return it due to notifications never working, even with all battery saving options disabled it just didn't work. Picked up the Galaxy Watch Active instead and that works perfectly, I'd recommend it instead if you still have the option of returning the FitBit. Used it with MIUI at first which worked perfectly after disabling the battery saving features.
I'm now rooted with Pixel Experience, had to download an older version of Samsung Pay to get it to work without detecting root and it's working great on that too.
Click to expand...
Click to collapse
Well, I've been trying to get her to return the watch, but she's looking at other phones instead. Left her to it. Ha!