Wifi randomly disconnects - Huawei P20 Lite Questions & Answers

Hi, just got my Huawei P20 Lite in January and dont know much about them, I've had samsung phones for the past 6 years and they were much easier to deal with.
Anyway, for some reason my wifi will randomly disconnect weather the phone is in use or asleep.
i never had this problem on my other phone and every other device in the house works perfectly.
i have tried restarting, forgetting and reconnecting the network, made sure "WiFi off during sleep" is off. wifi+ is off.
tried the above methods and nothings worked so far, i dont wanna do a factory reset but i will as a last resort.
any advice appreciated, Thanks.

kylebell192 said:
Hi, just got my Huawei P20 Lite in January and dont know much about them, I've had samsung phones for the past 6 years and they were much easier to deal with.
Anyway, for some reason my wifi will randomly disconnect weather the phone is in use or asleep.
i never had this problem on my other phone and every other device in the house works perfectly.
i have tried restarting, forgetting and reconnecting the network, made sure "WiFi off during sleep" is off. wifi+ is off.
tried the above methods and nothings worked so far, i dont wanna do a factory reset but i will as a last resort.
any advice appreciated, Thanks.
Click to expand...
Click to collapse
Hi there
Did you do a recent update?
Can you tell me your build number and model please?
Cheers,
AS

ars_chelsea said:
Hi there
Did you do a recent update?
Can you tell me your build number and model please?
Cheers,
AS
Click to expand...
Click to collapse
I did a factory reset and hope it works. I currently have 8.0.0.159 (C432) and my model number is ANE-LX1, vodafone branded.
Im hoping the factory reset will sort it out.

Just my penny's worth,I also am facing the same issues,constantly searching & disconnecting,despite having WiFi+ off.
However my software also a Vodafone handset albeit unlocked is on 8.0.0.151 (C782).

kylebell192 said:
I did a factory reset and hope it works. I currently have 8.0.0.159 (C432) and my model number is ANE-LX1, vodafone branded.
Im hoping the factory reset will sort it out.
Click to expand...
Click to collapse
The hard reset won't solve it if the issue was still present on your last update 8.0.0.157, so I've done the research and your complete build number is this one C432B157 .
If the issue was not present before on build 8.0.0.157, then I advise you to downgrade to that version. If the hard reset worked then great
In case you need a guide just quote me again
Cheers,
AS
---------- Post added at 16:24 ---------- Previous post was at 16:10 ----------
Davies_90 said:
Just my penny's worth,I also am facing the same issues,constantly searching & disconnecting,despite having WiFi+ off.
However my software also a Vodafone handset albeit unlocked is on 8.0.0.151 (C782).
Click to expand...
Click to collapse
Hi there
Same advice as the one for the OP, either downgrade to an older version until they fix it or wait for an the next February patch update
Cheers,
AS

ars_chelsea said:
The hard reset won't solve it if the issue was still present on your last update 8.0.0.157, so I've done the research and your complete build number is this one C432B157 .
If the issue was not present before on build 8.0.0.157, then I advise you to downgrade to that version. If the hard reset worked then great
In case you need a guide just quote me again
Cheers,
AS
---------- Post added at 16:24 ---------- Previous post was at 16:10 ----------
Hi there
Same advice as the one for the OP, either downgrade to an older version until they fix it or wait for an the next February patch update
Cheers,
AS
Click to expand...
Click to collapse
Hi AS,
Am I correct in assuming that if I wanted to "rebrand"
To flash "8.0.0.172(C432)" found here ?https://androidhost.ru/Tuu?pt=V1ZJdk9XWTBSMloyVlhRdlNHNVBTa2h6ZG5WQ1FUMDlPdmRCZFdZV2lSNko5NFlDTFgzbzVaZz0%3D thus enabling me to get more frequent updates? Will me being on c782 be an issue if I'm to flash c432

Update; Even after a factory reset its still happening.

Btw i would love to know how to debrand my phone.
I have tried the dload method, erecovery method, and the DNS method of firmware finder and nothing has worked.
Everytime I try i get "software update failed" and it's frustrating. Samsung firmware was easier to manipulate.

Davies_90 said:
Hi AS,
Am I correct in assuming that if I wanted to "rebrand"
To flash "8.0.0.172(C432)" found here ?https://androidhost.ru/Tuu?pt=V1ZJdk9XWTBSMloyVlhRdlNHNVBTa2h6ZG5WQ1FUMDlPdmRCZFdZV2lSNko5NFlDTFgzbzVaZz0%3D thus enabling me to get more frequent updates? Will me being on c782 be an issue if I'm to flash c432
Click to expand...
Click to collapse
Hi there
No, to rebrand a phone you need to change the oeminfo image of the system, you must have an unlocked bootloader and a TWRP recovery to backup the current oeminfo image (C782).
Cheers,
AS
---------- Post added at 13:10 ---------- Previous post was at 13:09 ----------
kylebell192 said:
Btw i would love to know how to debrand my phone.
I have tried the dload method, erecovery method, and the DNS method of firmware finder and nothing has worked.
Everytime I try i get "software update failed" and it's frustrating. Samsung firmware was easier to manipulate.
Click to expand...
Click to collapse
Hey
Same thing as for the other person, you need to change oeminfo system image to be able to flash a dload package
As for the issue you guys are having with the wifi connection you guys should downgrade via dload package to an older version of your system, example: 8.0.0.159 to 8.0.0.157, this will delete all your data though, so BACKUP FIRST and only then downgrade.
That should work for the Wifi issue.
Cheers,
AS

See my guide for how I did this. I unbranded my uk ee device to a generic European device

Related

[Q] Kitkat to Jellybean S4

I'm new here and I need help.
Please if anyone can guide me on how to downgrade my phone from Kitkat 4.4.2 to Jellybean.
My nephew upgraded it for me and few days after I noticed my mobile data was not working anymore. Second I noticed was Bluetooth, it wasn't working either. I ignored it because I coud still use wifi, but a week ago it also gave up. My phone also restarts on its own.
I asked some tech and I was told it was because of the upgrade that is why I want to downgrade. Anyone who can assist me please? Or any solution that you know. I am not sure myself if the problem was caused by the upgrade. I tried checking videos on youtube on how to downgrade but I;m scared to brick my phone. I am not sure about the correct files to download and that sort of stuff.
PLEASE help.
I just want my phone working.
I tried to root my phone
by following a video on
YouTube and I think it's
already rooted.
Ynayashi said:
I'm new here and I need help.
Please if anyone can guide me on how to downgrade my phone from Kitkat 4.4.2 to Jellybean.
My nephew upgraded it for me and few days after I noticed my mobile data was not working anymore. Second I noticed was Bluetooth, it wasn't working either. I ignored it because I coud still use wifi, but a week ago it also gave up. My phone also restarts on its own.
I asked some tech and I was told it was because of the upgrade that is why I want to downgrade. Anyone who can assist me please? Or any solution that you know. I am not sure myself if the problem was caused by the upgrade. I tried checking videos on youtube on how to downgrade but I;m scared to brick my phone. I am not sure about the correct files to download and that sort of stuff.
PLEASE help.
I just want my phone working.
I tried to root my phone
by following a video on
YouTube and I think it's
already rooted.
Click to expand...
Click to collapse
Well, nope I don't think now you can downgrade your device from KitKat to JellyBean not possible at all because the boot loader may have been upgraded and if you even try downgrading the device by rooting your device it may results in bricking up. I would say rather than moving forward with the downgrading better would be to stay with the KitKat and keep your fingers crossed for the next update to fix most of your problems.
promo87 said:
Well, nope I don't think now you can downgrade your device from KitKat to JellyBean not possible at all because the boot loader may have been upgraded and if you even try downgrading the device by rooting your device it may results in bricking up. I would say rather than moving forward with the downgrading better would be to stay with the KitKat and keep your fingers crossed for the next update to fix most of your problems.
Click to expand...
Click to collapse
Thank you.
Ynayashi said:
Thank you.
Click to expand...
Click to collapse
Depends on which variant of the S4 that you have. Some versions have ways to do a modded downgrade (not official via Odin like the good ole days...), but in general it's more trouble and risk than it is worth.
Thank you for your time and suggestions. I'd just want to add that my phone overheats even when it's off. And it also doesn't turn on anymore unless I connect the charger. I think its dying.
Ynayashi said:
Thank you for your time and suggestions. I'd just want to add that my phone overheats even when it's off. And it also doesn't turn on anymore unless I connect the charger. I think its dying.
Click to expand...
Click to collapse
Did he update the phone officially or custom rom? By OTA or from the computer? I would reset the device and reinstall the latest firmware via Odin on the PC. If it was done via OTA, that can cause some odd issues, especially if the download was not 100% or reset during the process. It's always a good idea to reset when updating major versions, despite what the manufacturers tell you. I see it all the time at my shop and during my many many hours here on XDA researching and helping others.
es0tericcha0s said:
Did he update the phone officially or custom rom? By OTA or from the computer? I would reset the device and reinstall the latest firmware via Odin on the PC. If it was done via OTA, that can cause some odd issues, especially if the download was not 100% or reset during the process. It's always a good idea to reset when updating major versions, despite what the manufacturers tell you. I see it all the time at my shop and during my many many hours here on XDA researching and helping others.
Click to expand...
Click to collapse
Thank you! All I know is that he upgraded my phone using my laptop and using Odin.
Maybe I can upgrade it again?
Ynayashi said:
Thank you! All I know is that he upgraded my phone using my laptop and using Odin.
Maybe I can upgrade it again?
Click to expand...
Click to collapse
Since you don't know exactly what or how it was done, it might be a good idea to post a screenshot of the About Phone section for us so we can see which update, if it's official, and all that.
es0tericcha0s said:
Since you don't know exactly what or how it was done, it might be a good idea to post a screenshot of the About Phone section for us so we can see which update, if it's official, and all that.
Click to expand...
Click to collapse
Thank you so much
My nephew was here lat night and tried different things to no avail. I am just sad I only use my phone now to play songs and take photos.
Here's the screenshot. I really appreciate your time guys.
raselo8o3 said:
Thank you so much
My nephew was here lat night and tried different things to no avail. I am just sad I only use my phone now to play songs and take photos.
Here's the screenshot. I really appreciate your time guys.
Click to expand...
Click to collapse
What region are you using the phone in? It looks like the firmware is from Romania. Not that it couldn't work other places, but sometimes it works best to use a firmware and modem meant for the area you are using the phone in... Stranger things have happened.
es0tericcha0s said:
What region are you using the phone in? It looks like the firmware is from Romania. Not that it couldn't work other places, but sometimes it works best to use a firmware and modem meant for the area you are using the phone in... Stranger things have happened.
Click to expand...
Click to collapse
Thank you again.
I am in the Philippines and I don't know what firmware my nephew used.
I found video on youtube and did the same to my phone but nothing happened. I flashed my modem, it says on youtube, modem wifi fix, did it twice but didn't work. I also tried custom kernel but was getting error.
I don't know what to do anymore. It's just really very sad for a very expensive smartphone to not work. Bluetooth, mobile data and wifi are all not working. It doesn't turn on as well if you remove the battery unless you connect a charger.
: (
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
es0tericcha0s said:
What region are you using the phone in? It looks like the firmware is from Romania. Not that it couldn't work other places, but sometimes it works best to use a firmware and modem meant for the area you are using the phone in... Stranger things have happened.
Click to expand...
Click to collapse
Thank you again.
I am in the Phillipines. I don't really know what firmware he used.
I flashed my modem twice tonight, found a video on youtbe about modem wifi fix and it didn't work too. Custom kernel didn't work as well as I was getting an error.
It's getting depressing, I don't know what to do anymore. It's just that, it's an expensive smartphone without mobile data, bluetooth and wifi. It doesn't turn on as well if you remove the battery unless you connect a charger.
raselo8o3 said:
Thank you again.
I am in the Philippines and I don't know what firmware my nephew used.
I found video on youtube and did the same to my phone but nothing happened. I flashed my modem, it says on youtube, modem wifi fix, did it twice but didn't work. I also tried custom kernel but was getting error.
I don't know what to do anymore. It's just really very sad for a very expensive smartphone to not work. Bluetooth, mobile data and wifi are all not working. It doesn't turn on as well if you remove the battery unless you connect a charger.
: (
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
Thank you again.
I am in the Phillipines. I don't really know what firmware he used.
I flashed my modem twice tonight, found a video on youtbe about modem wifi fix and it didn't work too. Custom kernel didn't work as well as I was getting an error.
It's getting depressing, I don't know what to do anymore. It's just that, it's an expensive smartphone without mobile data, bluetooth and wifi. It doesn't turn on as well if you remove the battery unless you connect a charger.
Click to expand...
Click to collapse
What happens when you try to toggle data? Does it turn on and right back off or does the switch to move to on not slide over or is greyed out?
I might try using Odin to install the Phillipines firmware, which you can find here:
http://www.ibtimes.co.uk/update-gal...xxufnbe-android-4-4-2-kitkat-firmware-1439096
It won't make it worse anyway...

Flashing S6 Edge to EE Network

Hi:
Newbie here, so please bear with me. I am fairly techie, but never really worked on phones (I'm a Windows / Network engineer by trade).
I had an S6 Edge on the Vodafone network, and live in an area with poor cell coverage. So, I fully took advantage of wifi calling. I've upgraded to the S8 (gorgeous phone, BTW) so I gave the device to my missus, who made the mistake of buying an EE iPhone, and hates it.
We unlocked the phone to the EE network, but the wifi calling option has vanished, and I've been told that this is by design, as only phone purchased directly from EE have wifi calling enabled.
Been looking around, and have seen that if we root the phone and flash it with an EE image, then things should be hunky dory. However, having never undertaken a project like this on a phone, I'm seeking some guidance, as I don't want to completely brick the device.
Are there any idiot-proof step-by-step guides on here to do this?
Cheers in Advance
Steevi93 said:
Hi:
Newbie here, so please bear with me. I am fairly techie, but never really worked on phones (I'm a Windows / Network engineer by trade).
I had an S6 Edge on the Vodafone network, and live in an area with poor cell coverage. So, I fully took advantage of wifi calling. I've upgraded to the S8 (gorgeous phone, BTW) so I gave the device to my missus, who made the mistake of buying an EE iPhone, and hates it.
We unlocked the phone to the EE network, but the wifi calling option has vanished, and I've been told that this is by design, as only phone purchased directly from EE have wifi calling enabled.
Been looking around, and have seen that if we root the phone and flash it with an EE image, then things should be hunky dory. However, having never undertaken a project like this on a phone, I'm seeking some guidance, as I don't want to completely brick the device.
Are there any idiot-proof step-by-step guides on here to do this?
Cheers in Advance
Click to expand...
Click to collapse
It's actually a lot simpler than you think. No need to root all you have to do is flash the EE firmware through Odin (Samsung flashing tool) and voila, EE Wi-Fi calling will appear. Also volte will be available too.
If you need step by step I can help.
I need model number and android version and I can link you the firmware.
callumbr1 said:
It's actually a lot simpler than you think. No need to root all you have to do is flash the EE firmware through Odin (Samsung flashing tool) and voila, EE Wi-Fi calling will appear. Also volte will be available too.
If you need step by step I can help.
I need model number and android version and I can link you the firmware.
Click to expand...
Click to collapse
Hey dude.... after trolling through this forum some more, I was able to find what I needed to flash the firmware onto the device... However, Wi-Fi calling (as an option) does not seem to appear yet, but I wonder if that is due to the lack of SIM card (wife put it back in her iPhone, so I could sort this at work.
If I've downloaded the wrong stuff, then I'm happy to redo.
Model Number: SM-G925F
Android Version: 7.0
Baseband Version: G925FXXU5EQF1
Steevi93 said:
Hey dude.... after trolling through this forum some more, I was able to find what I needed to flash the firmware onto the device... However, Wi-Fi calling (as an option) does not seem to appear yet, but I wonder if that is due to the lack of SIM card (wife put it back in her iPhone, so I could sort this at work.
If I've downloaded the wrong stuff, then I'm happy to redo.
Model Number: SM-G925F
Android Version: 7.0
Baseband Version: G925FXXU5EQF1
Click to expand...
Click to collapse
When you downloaded the firmware was there 5 files in the zip? Or just the one AP file?
Did you look in phone app > settings then scroll to bottom for Wi-Fi calling option? If you flashed an EE firmware it should be there mate.
As well as the EE firmware you need to have the EE csc. You have this csc, EVR?
callumbr1 said:
When you downloaded the firmware was there 5 files in the zip? Or just the one AP file?
Did you look in phone app > settings then scroll to bottom for Wi-Fi calling option? If you flashed an EE firmware it should be there mate.
As well as the EE firmware you need to have the EE csc. You have this csc, EVR?
Click to expand...
Click to collapse
Hi... There was only the one file (the AP file, I believe)_ and no, when I checked the phone settings, wifi calling was not showing as an option. If you have a link to the correct firmware, I'm happy to reflash the phone, as I have everything here with me at work.
Steevi93 said:
Hi... There was only the one file (the AP file, I believe)_ and no, when I checked the phone settings, wifi calling was not showing as an option. If you have a link to the correct firmware, I'm happy to reflash the phone, as I have everything here with me at work.
Click to expand...
Click to collapse
Flash this version from here
http://updato.com/firmware-archive-select-model?record=75717719616711E7963AFA163EE8F90B
The version you flashed previous was PRT Poland version.
Flash the one I posted it is UK EVR and then you will have Wi-Fi calling.
callumbr1 said:
Flash this version from here
http://updato.com/firmware-archive-select-model?record=75717719616711E7963AFA163EE8F90B
The version you flashed previous was PRT Poland version.
Flash the one I posted it is UK EVR and then you will have Wi-Fi calling.
Click to expand...
Click to collapse
Thanks.... I will give that a go when I get home. Cheers.
Steevi93 said:
Thanks.... I will give that a go when I get home. Cheers.
Click to expand...
Click to collapse
No problem
Steevi93 said:
Thanks.... I will give that a go when I get home. Cheers.
Click to expand...
Click to collapse
If by chance you encounter hidden.img fail in Odin don't panic.
Just unpack the firmware and remove the hidden.img. repack and flash again.
callumbr1 said:
If by chance you encounter hidden.img fail in Odin don't panic.
Just unpack the firmware and remove the hidden.img. repack and flash again.
Click to expand...
Click to collapse
Heya.... no such "issues" so to speak. Just one where my baby kicked the USB cable, causing a brief disconnect during the flashing process. This, of course, sent me into a spiral of panic because the entire phone crashed, with errors, recovery messages invoking Smart Switch, and the like. However, restarting the phone and connecting it to Odin completely recovered the phone.
Initially, the flashing worked, but it didn't enabled Wi-Fi calling, so I reset the phone back to factory settings, flashed it again and voila!!!! Worked like a charm! Then restored the backup from Smart Switch that I made yesterday, and the missus now has a full functional EE phone with Wi-Fi calling.
Thanks very much for your help mate.... you're a legend.
I'm gonna keep Odin, as it seems like a great recovery tool as well. :good:
Steevi93 said:
Heya.... no such "issues" so to speak. Just one where my baby kicked the USB cable, causing a brief disconnect during the flashing process. This, of course, sent me into a spiral of panic because the entire phone crashed, with errors, recovery messages invoking Smart Switch, and the like. However, restarting the phone and connecting it to Odin completely recovered the phone.
Initially, the flashing worked, but it didn't enabled Wi-Fi calling, so I reset the phone back to factory settings, flashed it again and voila!!!! Worked like a charm! Then restored the backup from Smart Switch that I made yesterday, and the missus now has a full functional EE phone with Wi-Fi calling.
Thanks very much for your help mate.... you're a legend.
I'm gonna keep Odin, as it seems like a great recovery tool as well. :good:
Click to expand...
Click to collapse
Hey buddy,
Brilliant news mate enjoy. Glad I could help you.
Yeah keep Odin as it's always very useful in times of need. However you shouldn't have any issues from now :good:
Thanks the posts if you can mate :good:

Honor 10 Hard Bricked Dead Boot

I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
awells845 said:
I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
What did service center guys say?
I remember you saying you sent it to service center.
miststudent2011 said:
What did service center guys say?
I remember you saying you sent it to service center.
Click to expand...
Click to collapse
They were unable to fix it or replace the device as bricking voids the warranty.
awells845 said:
They were unable to fix it or replace the device as bricking voids the warranty.
Click to expand...
Click to collapse
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
miststudent2011 said:
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
Click to expand...
Click to collapse
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
awells845 said:
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
Click to expand...
Click to collapse
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Tecalote said:
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Click to expand...
Click to collapse
I answered
awells845 said:
I answered
Click to expand...
Click to collapse
Thanks I read it and answered also
awells845 said:
I used HuRUpdater to, flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
I have same problem , I connected my device to adb , and I tried to reboot it , with adb reboot bootloader , fastboot reboot etc. and it said starting dameon , but stil nothing. pease help
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
gerardo96 said:
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
Click to expand...
Click to collapse
Solved!??
How did you solve it?
?
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max, any news?
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
vampirian said:
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
Click to expand...
Click to collapse
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life?
gerardo96 said:
Hello Max, any news?
Click to expand...
Click to collapse
Oh I didn't have any problems with my phone but I wanted to know how to solve it in case I try to upgrade it and have some problems . Sorry for giving the impression that I had a bricked device
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
gerardo96 said:
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life
Click to expand...
Click to collapse
gerardo96 said:
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
Click to expand...
Click to collapse
I tried that but it didn't work. Did you do anything before that ?
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
PalakMi said:
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
Click to expand...
Click to collapse
I did, I could rolled back to 8.0 and then I updated to 8.1 but first you have to unbrick your phone as I did with EMUI9
---------- Post added 6th January 2019 at 12:02 AM ---------- Previous post was 5th January 2019 at 11:58 PM ----------
superuser590 said:
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
I tried that but it didn't work. Did you do anything before that ?
Click to expand...
Click to collapse
Make sure to include the Twrp.iso file
My phone was hard bricked... Everybody said It couldn't be fixed..but I did! If course I suffered 4 days trying to revive it day and night..until I got it

Downgraded to unlock bootloader and now cannot OTA update

So I managed to downgrade to successfully unlock my bootloader however I am now stuck on 8.0.0.046(092Y) and am unable to OTA update. I have installed magisk and TWRP and they are both currently working however I am curious as to why I cannot update to a newer 8.0 OTA firmware. Any suggestions? The device is an ANE-LX3 single sim.
Because you used wrong firmware.
(092y) or similar numbers are here because wrong firmware..
At least that was case for me, when I installed single SIM firmware over dual SIM phone, and of course, that build number not exist in update servers, so no updates here, till you fix your firmware
Arnys said:
Because you used wrong firmware.
(092y) or similar numbers are here because wrong firmware..
At least that was case for me, when I installed single SIM firmware over dual SIM phone, and of course, that build number not exist in update servers, so no updates here, till you fix your firmware
Click to expand...
Click to collapse
This is what I feared, thanks for confirming. I am hoping flashing this will solve my issues. Any advice before doing so?
metalfangs said:
This is what I feared, thanks for confirming. I am hoping flashing this will solve my issues. Any advice before doing so?
Click to expand...
Click to collapse
HM.. in link you gave here, is writed about ane-lx1, you mentioned your phone are ane-lx3 single sim, so, I'm not sure it can fix your problem..
And I'm not used that files, and can't say anything about that.
And more important, what was full build number for your phone, aka ane-lx3c779, something like that, can you find it? Then I maybe be able to help.
And ,wulda be great if you type down all you did with phone, what used, etc.
Arnys said:
HM.. in link you gave here, is writed about ane-lx1, you mentioned your phone are ane-lx3 single sim, so, I'm not sure it can fix your problem..
And I'm not used that files, and can't say anything about that..
Click to expand...
Click to collapse
I noticed the file name is LX1 however in the description it says its for all models which is confusing. Any idea where I could find an official firmware download for LX3? Even a functional custom rom compatible with my device would be fine if I could find one.
I used hisuite to first downgrade and then used the firmware from this post to dload downgrade again in order to unlock the bootloader. I then factory reset after successfully unlocking the bootloader which left me at build 046.
To be honest I cannot remember what the original build number was although c779 does sound very familiar.
metalfangs said:
I noticed the file name is LX1 however in the description it says its for all models which is confusing. Any idea where I could find an official firmware download for LX3? Even a functional custom rom compatible with my device would be fine if I could find one.
I used hisuite to first downgrade and then used the firmware from this post to dload downgrade again in order to unlock the bootloader. I then factory reset after successfully unlocking the bootloader which left me at build 046.
To be honest I cannot remember what the original build number was although c779 does sound very familiar.
Click to expand...
Click to collapse
Hm, did you tried erecovery method ? Maybe that can fix your problem
metalfangs said:
So I managed to downgrade to successfully unlock my bootloader however I am now stuck on 8.0.0.046(092Y) and am unable to OTA update. I have installed magisk and TWRP and they are both currently working however I am curious as to why I cannot update to a newer 8.0 OTA firmware. Any suggestions? The device is an ANE-LX3 single sim.
Click to expand...
Click to collapse
Hello there brother. May I humbly ask how did you get your bootloader unlocked after downgrading? Can you share some steps please if you don't mind. Thank you

Mate 20 pro back to stock - no update method works

Hi
I have Mate 20 Pro (Lya-L09, EMUI 9.0.0) that I upgraded from original firmware to 9.0.0.210 using MikeOS method.
Now i just want it back to stock as when i 'check for updates' it never finds any even though i know new firmware has been released OTA.
I have downloaded updated firmware through Firmware Finder (tried both through the phone and through the app)
However, no method seems to work (I've tried all of them). They usually just error out or nothing at all. I've tried/looked at different tools: SP Flash, Flashy, Dload (dialer and eRecovery), MikeOS.
I'm happy to lose everything and start again, i just don't know how and I'm going around in circles looking at various websites and threads.
Any help appreciated.
Which cust is your device ? Cxxx ?
Does your bootloader is unlocked ?
KennyJ78 said:
Hi
I have Mate 20 Pro (Lya-L09, EMUI 9.0.0) that I upgraded from original firmware to 9.0.0.210 using MikeOS method.
Now i just want it back to stock as when i 'check for updates' it never finds any even though i know new firmware has been released OTA.
I have downloaded updated firmware through Firmware Finder (tried both through the phone and through the app)
However, no method seems to work (I've tried all of them). They usually just error out or nothing at all. I've tried/looked at different tools: SP Flash, Flashy, Dload (dialer and eRecovery), MikeOS.
I'm happy to lose everything and start again, i just don't know how and I'm going around in circles looking at various websites and threads.
Any help appreciated.
Click to expand...
Click to collapse
Try changing your home internet/Wi-Fi DNS and then use eRecovery. Some ISPs may block access to China sites. At least mine does. When I use my home Wi-Fi, I can't access some China sites, but if I use my cell network instead, I can access those sites without problem.
Factory reset your phone first might help. Since you tried so many ways to update, you might have messed up some system files.
oslo83 said:
Which cust is your device ? Cxxx ?
Does your bootloader is unlocked ?
Click to expand...
Click to collapse
In the settings: C34E13R1P16
I'm guessing my bootloader is locked, however if there is a way of finding out, please let me know how.
Thanks
Amowagou said:
Try changing your home internet/Wi-Fi DNS and then use eRecovery. Some ISPs may block access to China sites. At least mine does. When I use my home Wi-Fi, I can't access some China sites, but if I use my cell network instead, I can access those sites without problem.
Factory reset your phone first might help. Since you tried so many ways to update, you might have messed up some system files.
Click to expand...
Click to collapse
Hi
With recovery I changed my DNS on the router and my phone. With FF, I tested to hicloud and it worked, but when it reset it couldn't access the package and directed me to Huawei website.
Factory reset is something to consider.
KennyJ78 said:
In the settings: C34E13R1P16
I'm guessing my bootloader is locked, however if there is a way of finding out, please let me know how.
Thanks
Click to expand...
Click to collapse
Just flash B212 (
http://update.dbankcdn.com/TDS/data/files/p3/s15/G3469/g1750/v234906/f1/full/update_full_base.zip
)
With this method (Use hisuite UPDATE's option)
https://forum.xda-developers.com/showpost.php?do=showpost&p=78850439
Once on LYA C34 B212, that should bring you back C34 OTAs for your device.
oslo83 said:
Just flash B212 (
http://update.dbankcdn.com/TDS/data/files/p3/s15/G3469/g1750/v234906/f1/full/update_full_base.zip
)
With this method (Use hisuite UPDATE's option)
https://forum.xda-developers.com/showpost.php?do=showpost&p=78850439
Once on LYA C34 B212, that should bring you back C34 OTAs for your device.
Click to expand...
Click to collapse
Thanks Oslo83.
If i'm using the Hisuite update method, how do i point it to the b212 flash? Wouldn't Hisuite just look online for an update?
KennyJ78 said:
Thanks Oslo83.
If i'm using the Hisuite update method, how do i point it to the b212 flash? Wouldn't Hisuite just look online for an update?
Click to expand...
Click to collapse
You register an approved B212 on FirmwareFinder, then you used patched hisuite with FirmwareFinder DNS and the Hisuite's update option.
That should update you to B212.
oslo83 said:
You register an approved B212 on FirmwareFinder, then you used patched hisuite with FirmwareFinder DNS and the Hisuite's update option.
That should update you to B212.
Click to expand...
Click to collapse
Holy smokes! This worked! I can't thank you enough!
I had some issues originally of HiSuite just kept closing on my laptop when i clicked 'update'. Took about 5 goes and having HiSuite showing on my phone for the update to begin.
Have since downloaded new update OTA (273).
Awesome!
KennyJ78 said:
Holy smokes! This worked! I can't thank you enough!
I had some issues originally of HiSuite just kept closing on my laptop when i clicked 'update'. Took about 5 goes and having HiSuite showing on my phone for the update to begin.
Have since downloaded new update OTA (273).
Awesome!
Click to expand...
Click to collapse
C34 otas should now bring you to 9.1
Enjoy.
oslo83 said:
C34 otas should now bring you to 9.1
Enjoy.
Click to expand...
Click to collapse
Hello,
I'm also on this version and i got this phone from a german vendor but australian OPTUS branded sad..
is there a way to remove this branding?
i am too having the single sim model lya-09.
chandanbs said:
Hello,
I'm also on this version and i got this phone from a german vendor but australian OPTUS branded sad..
is there a way to remove this branding?
i am too having the single sim model lya-09.
Click to expand...
Click to collapse
So far on kirin980 there is only dirty-softrebrand. (DC-Phoenix flash or forced hisuite flash or even possibly renamed dload package flash)
Meaning device's vendorcountry stays the same, but with cust and preload forced to another region. Beware of that on emui10 where it seems there is checks at boot about cust&preload version.
oslo83 said:
So far on kirin980 there is only dirty-softrebrand. (DC-Phoenix flash or forced hisuite flash or even possibly renamed dload package flash)
Meaning device's vendorcountry stays the same, but with cust and preload forced to another region. Beware of that on emui10 where it seems there is checks at boot about cust&preload version.
Click to expand...
Click to collapse
I was happy to order a mate 20 pro for 490 euro for a dual Sim but got the single sim sim locked version. I have returned the product asking for a refund. ?.

Categories

Resources