Here's a guide to unbrick your X96Max.
You simply need a screwdriver or any other small metal object. Place and hold it on the two contacts in the picture. Insert the power cable. Hold for 1 second and as soon as the box "blinks" - remove the jumper.
https://mega.nz/#!xookHabK
Decryption Key?
Dear Your link ( Meganz) requires a decryption key to access the file. where is key?
You're such an asshole.
Thx for your work, i have a little Question
Your link ( Meganz) requires a decryption key to access the file. where is key?
Related
I was trying to flash the RRE_Fuze_Rom_v40_Hybrid rom - only to find out after booting that it contained Windows Mobile Beta - and had expired.. the screen seems to be locked and I cant establish an Active Sync connection to reflash.
I think I saw something before to the degree of putting an image onto an sd card and booting with that in..
Can someone give me some advice on how to re-flash so that I can use my phone.. A link with instructions would be sufficient.
Anyway work arounds are welcome - I don't think I have a mini-sd card reader with me at my office so.. i'm open to "creativity".
P.S. - sorry if this is in the wrong place.
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
Hope that helps ^^
Thank you so much.. I think i'm back in action now!
Zeraven said:
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Hope that helps ^^
Click to expand...
Click to collapse
I want to use the SD card flash files OXYGEN to HTC.
QMAT software do GoldCard have used.
Into three color screen to enter the command SET32 tip with MTTY unlocked. The mobile phone SD card and then plug in press the power button again to boot key flash.
tip
Checking SD contents
Invalid Certificate
press any key to continue
Can someone help me? thank you
My English is not so good. If there is a Chinese friend in please reply in Chinese.
So far I can't post PM or message to developement board as new registered user, lets try to get answer to my problem this way
Problem and following ROM is related to Xperia GO
I downloaded, installed and started use ExtremeSecurity Stock Jelly Bean 6.2.A.1.100 European ROM http://forum.xda-developers.com/showthread.php?t=2328171. I did it as I need something to replace stock one with delays it have. I found one problem, I am unable to solve. After install and rooting I found I can't use the home key (the touch sense key under display - the one with "house"). I was trying to google and change mapping of this key and did not succeed. So I made some tests and did not move anywhere forward...
1) If I go to recovery, cwm allow me to display key numbers in some menu. Here key respond well it code as 102 (as it should)
2) If I add line like key 102 HOME WAKE to any file in /system/usr/keylayout nothing change (after editing I reboot, then put it back, so far I was not succesfull)
3) If I use any of "keypress test application" (try 3 of them) they report all keys well (back, settings, vol up/dwn power) but no report and no action for home.
There is no difference in press or long press of key. Simply no action follows.
Do you have any Idea what can be wrong?
Thanks a lot
Karel
P.S. If admins will forward it as message to munjeni or move to Developement part of forum for this ROM, please delete it here...
Hi Guys,
Sorry if this is a re post or someone else has come up with a better alternative. Hopefully then a moderator will clean this thread.
As most of us have just migrated to ultra from different models, we may have a spare headset laying round. The issue here is most of the headset is just not compatible with ultra i.e the buttons don't function as we want it to. This is a guide that may help solve that problem getting the best out of our old headset or the ones from different models
These are the steps
0.MAKE BACKUP OF SYSTEM!
1. root
2.Install THIS
3.Plug in your headset, open Key test and click any button
4.Note down scancode. In my case it was 257
5.Browse to system/usr/keylayout/msm8974-taiko-mtp-snd-card_Button_Jack.kl (use rootbrowser)
6.search for HEADSETHOOK
7.change the key to what ever scancode gives i.e 257 (in my case) . It should look like this
#original: key 226 HEADSETHOOK WAKE
#changed: key 257 HEADSETHOOK WAKE
8.now change the scancode number, in my case key 257 to 226 (or the key HEADSETHOOK is assigned to)
#original: key 257 VOLUME_UP WAKE
#changed: key 226 VOLUME_UP WAKE
9. Install THIS
10.Reboot
11.Configure buttons as per your wish
Hope its helpful.
good post, but probably should be in themes and apps section with the other Mods?
I am very interesting
I have generic headphone button with mic
only Play/Pause button work
(Back/Next button dont work)
I tried what you write with my Marshall Headphones and a Sony Xperia Z. I didnt find a file with the exact name, in my case I only found a file called apq8064-tabla-snd-card_Button_Jack.kl . In this file there are the headsethook command lines but when I try to save my changes, the system tells me "please select your SD Card first" but I am not able to select it then, it just ignores my selection. What can I do?
CyberSAD
Hi all,
I really am no expert about anything to do with Android but I'm trying to change the power button to the volume button (power button is faulty). I was following this procedure that I found but I cannot locate this file:
Open root browser/ADB, go system/usr/keylayout. Look for file (like) mtk-kpd.kl The file name varies from device to device, but it normally ends with -kpd.kl/-keypad.kl.
I've got as far as the system/usr/keylayout file but there is nothing in there that looks like -kpd.kl/-keypad.kl
Anyone got any tips (or another way of doing this?). Advice much appreciated.