I want to use the SD card flash files OXYGEN to HTC.
QMAT software do GoldCard have used.
Into three color screen to enter the command SET32 tip with MTTY unlocked. The mobile phone SD card and then plug in press the power button again to boot key flash.
tip
Checking SD contents
Invalid Certificate
press any key to continue
Can someone help me? thank you
My English is not so good. If there is a Chinese friend in please reply in Chinese.
Related
I've been trying for several weeks now to unlock my XDA1 Wallaby without success. Some members have tried to help but no joy. In trying to load the Special Edition ROM I get the Error 011 message per the attached screen grab. Can anyone tell me why this is occurring and what the solution is? My current device ROM is version 4.01.16ENG, Radio Version 6.25.02, Protocol version 32e4.
Any help with this frustrating issue would be much appreciated. Willing to make a phone call if you can help. Thanks.
It´s a very easy solution.
Your installed ROM prohibits flashing via Exe....
Extract the special Edition ROM with winzip or anything else. You got an folder called English. In this folder is a file NK.nbf with about 32 MB. This File you will need for flashing via SD-Card.
Instructions how to flash via SD could be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
are complete instructions what you have to to to unlock your device.
Step 6 is not a must. If you get an error Message you should be able to process without downgrading the bootloader....
Stefan
Stefan,
Thanks for your response. I followed the instructions you pointed me to but they are a little unclear. I first copied the ROM image to my SD Card while in my device (I later assumed the instructions meant to write the ROM image to the SD Card via a card reader, which I don't have).
After downloading to the SD Card in my device I held the power button and soft reset which displayed on screen the message:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
However, nothing happens in touching ACTION on the screen to download. What do I do?
Thanks, David
Don´t know, what you are meaning with "touching ACTION" put you have to press the center of the navigation button on your device to start installation.....
Using the XDA-SD-Slot is also ok. You just have problems if anythhing went wrong, and you don´t have access to this slot any more....
Stefan
Stefan,
Thanks for your reply. I've sent a response to your personal email address.
David
Hi all, first post from an XDA newbie - be gentle!!
I've inherited an 02 XDA from my brother as it's not working & he's upgraded.
I'm trying desperately to get this thing to work. He installed the xda-developers Special Edition ROM V1.2 (according to the front screen - it says in red in the bottom corner 3.17.83 , it also has a red G and R above this)
It doesn't seem to hold a charge very long, which suggests the internal battery is dead. I've read about the light in the top right corner of the unit - I've never seen this lit except once when it went red for a few seconds.
When its sat in the cradle, it seems to work ok. I've checked the Version etc, and it reads:
ROM 3.17.03 ENG
ROM Date: 5.15.03
Radio Version:
Protocol:
I want to reinstall the XDA ROM to see whether it works with the "official" ROM.
I've tried to do a soft reset, I get the stripey screen with WALLABY BootLoader V5.22. After the WAIT sign, I get GSM ERROR, which ties in with the above Version Info in that there is no Radio Version number?
When I press the Action key, I see GSM turn ON Please Wait - then after waiting I get GSM turn ON fail!!
Can anyone tell me how to do the following:
1) Get the official operating system from the o2 website onto an SD Card
2) Get the XDA to boot from the new operating system
I can see from the 02 website that there are 2 downloads, RUU and RSU. I guess one is the OS and one is the radio unit (gsm settings??)
I have a laptop with SD Card reader built in, and a blank 256mb SD Card.
I apologise for the length of this posting, but I have no idea what I'm doing really! Any advice / help would be appreciated.
Thanks, Steve
PS - also tried a hard reset, but first press switches off the unti, and it stays off after the second press - HELP!!!!
YOur GSM Part is corrupt.
Flashing a new ROM wouldn't solve the problem....
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
thanks Stefan.
I read the link, how do I install the ROM to the XDA unsing SD Cardreader & Bootloader?
Sorry for the obvious questions - I appreciate your help!
Steve
this is just rom though not radiostack
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Thanks guys, you've been really helpful.
I'll report back when I've tried to do all this stuff.
One more question - I've only got a 64Mb SD Card, is that big enough?
ALSO - in the instructions it says "Select your Rom Image from the Source drop down menu. "
Which file is the ROM image?
nk.nb1 or nk.nbf
and yes 64MB should be enough
The mystery deepens -
I've put the SD Card in the card reader, but when I use XDATools, i can't select the SD Card as the destination for the ROM image file.
I click on the Removable "E" drive in the Explorer style layout, but it's almost like the tool is wantingme to select something, but i don't know what!
FYI, the SD card already has some data on it ( I took it out of my Dads Digital camera!) Could this be the problem?
Thanks
I was trying to flash the RRE_Fuze_Rom_v40_Hybrid rom - only to find out after booting that it contained Windows Mobile Beta - and had expired.. the screen seems to be locked and I cant establish an Active Sync connection to reflash.
I think I saw something before to the degree of putting an image onto an sd card and booting with that in..
Can someone give me some advice on how to re-flash so that I can use my phone.. A link with instructions would be sufficient.
Anyway work arounds are welcome - I don't think I have a mini-sd card reader with me at my office so.. i'm open to "creativity".
P.S. - sorry if this is in the wrong place.
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
Hope that helps ^^
Thank you so much.. I think i'm back in action now!
Zeraven said:
As it says here: http://forum.xda-developers.com/showthread.php?t=448008
Hope that helps ^^
Click to expand...
Click to collapse
Hello my name is Robin,
Yesterday I tried to install Chainfire 3D but with no luck, I saw after that time it was not made so for Jellybean. very stupid of me now, so do not start my phone when I put it in force update I get a pink screen I can still come from my phone in the normal recovery, but that's the only thing I can. tried wipe cache and reset without result. Can you help me because I already busy two days and it still can not.
Sorry for my bad english I'm dutch.
Greetings Robin
Van anybody help me
please can enyaone give a answer fast? I wan't to give this phone as a christmas present to my cousin
Hope somebody will help me
Robje007 you only get the pink screen if their is no update found below is how to use force update
Upgrade instructions
1. Unzip the downloaded file
2. Place the Update.app inside a folder named "dload" on your SD card root directory
3. Power off and turn on your Ascend Y300 holding volume down + volume up + power button
This was taken from Huawei upgrade guide
Force upgrade
Step 1. A MICRO SD card of 2G or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Copy the Software: main package to a directory named dload.
Step 4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of
the MICRO SD card.
Step 5. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode.
Step 6. When the progress bar stop, the phone will restart, if not , you need to
remove the battery manually.
Step 7. Copy the Software:vendor package to a directory named dload. Then
Execute Step 4 – Step6 repeatedly.
If want to install a custom or repack Rom for the phone Then
Press vol up + power to boot into recovery and install the Rom from their. (Keep pressing the buttons until the phone boots into recovery)
If you want to boot into sideloader and use adb to push a Rom then
Press vol down + power if the Hauwei logo stays on the screen then you are in sideloader mode keep pressing the keys for at least 10 to 15 seconds.
Hope this is of help to you
i want to know what alternative volume button flex strips can i use for my huawei y300-0100 as mines damage and its not available in my country
I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
HamzaLV said:
I am looking for a firmware for my Huawei G-610 (V100R001C00B115). I couldn't find it free of cost over the internet, can anyone help me finding it?
Click to expand...
Click to collapse
check it here bro http://consumer.huawei.com/np/support/downloads/index.htm
STEPS FOR INSTALLATION
step One: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step Two: Check the root directory of the SD card you dload UPDATA.APP.
Step Three: phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
Step Four: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.
sorry for late reply btw good luck!!!