Hi.
I have a question if is available firmware for Stratos with old buttons mapping that does not switch to new buttons mapping after alarm snooze?
If not, I have second question.
Is available firmware 2.3.7.0 with disabled update notifications. I do not want to be noticed about new version of firmware (I do not want any updates).
Thank you.
Related
Hi Amazfit lovers
1.Are the any news that the additional features (f.ex. remote control of airpurifier, or additional sport modes) from the AF pace 2 will be introduced on 1gen?
2.Maybe a port from the original 2nd Gen could work on the 1st?
3.Are the any differences from electronic perspective (ram, storage, processor) between the versions? (I'm not talking about the elegant version without GPS)
Regards
1. Those things are already in the cn ( or pacified ) version, not in the US version.
2. As most of the things are the same, it could be possible
3. There is no elegant version without GPS.
When I read the thread about the ROM PACEficator the I see the US is available to install. Why do you think it's not possible?
I think you don't understand what you are talking about.
1. The Amazfit PACE is the US version of the Amazfit.
2. The original US firmware ( 1.3.5F that comes for the Pace) does not come with smarthome, or any newer stuff.
3. The Pacified Rom is a Chinese Dev ROM that has translations for other languages.
So no, there is still no original US ROM with smarthome connectivity.
But as it is possible to get the far more advanced CN ROM onto the Pace, it would surprise me if there won't be a back port of the Stratos ROM.
fzelle said:
I think you don't understand what you are talking about. ...
Click to expand...
Click to collapse
You're 100% right.
I have the official 1.3.5. few things annoy me in the current SW and I see they are fixed in the PACEified ROM or the 2nd Gen Amazfit
With the xiaomi phone I have already figured out what to do, but the smart watch I'm learning.
Unfortunately there is no "full" (at least what I saw) tutorial explaining every aspect of the phone... Form basic stuff to unlocking bootloader and flashing of ROM. The knowledge is scattered and sometimes misleading or not up to date.
Hello
I have seen several new releases for the amazfit bip but I do not see any description....
Ex. Version Mi Fit 3.3.2.1
What's new in this firmware?
If there is not a dedicated page for firmware versions and description, we might use this thread to talk about new firmware features.
Thanks
Mainly firmware 0.1.0.99 seems to create a lot of issues when using the watch with notify & amazfit...
Is there a repository of the different firmwares anywhere?
Fw 0.1.1.14
Is there a firmware version, recent or not that creates no issues with tools & amazfit ? Bought the damn thing, paired once, now the watch randomly disconnects and cannot reconnect even if I factory reset, uninstall tke t&a or unpair/pair. Before that it was perfect.
Yes install the latest mifit and you will get updates to the latest version.... I think it is v.1. 1.25
lemmon said:
Yes install the latest mifit and you will get updates to the latest version.... I think it is v.1. 1.25
Click to expand...
Click to collapse
I updated via Notify and the FW is 0.1.1.31
Hebrew font for Amazfit bip -only for notification
Can some one help with adding hebrew font to amazfit bip only for notificashion (not to translate the interfase, only for notificashion) ???
My FW is V0.1.1.36
Hi,
yesterday I installed some apk new watchfaces in my Amazfit Pace international version:
model: A1612
version ROM: 2.8.3.0
Custom watchfaces works well, but it's impossible to use stock watchfaces both by watch and by mobile Amazfit app. When I choose one of them they are showed as enabled in My Watch section of the app but the Pace continue to show custom apk watchface.
Who can help me?
Probably the APK watchface isn't compatible with your firmware. As of now, there are 3 versions:
- Old "Pace" versions (WOS1, Pace with INTL firmware 1.x.y or CN firmware older than 1.0.39/1.0.40, I don't remember now);
- Common "Stratos" version, WOS2 besides newest versions (older than Stratos INTL 2.3.7.0 and Pace CN 2.6.5.0);
- Newest WOS2 version, for latest firmwares (same or newer than the ones above).
I don't have a Pace with INTL firmware so I am not sure is 2.8.3.0 use the common or newest versions. Anyway, you should remove all of them, restart watch, install them one by one while restarting watch after each install to test. And avoid installing many as they may conflict to each other...
lfom said:
Probably the APK watchface isn't compatible with your firmware. As of now, there are 3 versions:
- Old "Pace" versions (WOS1, Pace with INTL firmware 1.x.y or CN firmware older than 1.0.39/1.0.40, I don't remember now);
- Common "Stratos" version, WOS2 besides newest versions (older than Stratos INTL 2.3.7.0 and Pace CN 2.6.5.0);
- Newest WOS2 version, for latest firmwares (same or newer than the ones above).
I don't have a Pace with INTL firmware so I am not sure is 2.8.3.0 use the common or newest versions. Anyway, you should remove all of them, restart watch, install them one by one while restarting watch after each install to test. And avoid installing many as they may conflict to each other...
Click to expand...
Click to collapse
Thanks for your help!
After a factory reset I try to add the custom watchfaces one by one and I found some of them didn't work properly.
Hi
I noticed that since i have installed a few apk watch faces the stock watch faces of the amazfit stratos do not apply ny more.
Also a few of them are missing.
I now run rom version 2.3.9.0
Can someone tell me if its ok to flash a new rom even if its older from the one running now?
Thanks a lot
There were changes in the libraries used by watchfaces since Stratos INTL firmware 2.3.8.0 (the same applies to Pace CN 2.6.50 and probably next Pace INTL firmware as well), so you must uninstall all APKs you have and check if developers has released a new version that is compatible.
Got a Poco M4 Pro 4G about a week ago, after initial set up stock rom updated to 13.0.1 (SKEEUXM). I see there are newer versions but several days later no update is available?
I am desperately looking to update or even downgrade due to a poor light sensor performance - in low ambient light and with auto brightness enabled the screen gets way too dark (sensor goes to 0 lux, when in reality it is not that dark). In a well lit environment it works adequately. Someone mentioned in another forum that after updating, they got rid of the issue.
That (V13.0.1.0.SKEEUXM) is currently the most up-to-date Android 12 firmware for the EEA. I think you could switch back to Android 11 (and a more recent firmware update) manually by unlocking the bootloader and flashing a fastboot package, but it's pretty hands on. Otherwise all you can do is wait for Xiaomi to update their A12 firmware.
Thanks mate, that means my updater is working fine then. I am tempted to go down to android 11 and a more recent firmware really, the sensor is acting terribly on the current one but it's still blind hope that would resolve it.
aricooperdavis said:
That (V13.0.1.0.SKEEUXM) is currently the most up-to-date Android 12 firmware for the EEA. I think you could switch back to Android 11 (and a more recent firmware update) manually by unlocking the bootloader and flashing a fastboot package, but it's pretty hands on. Otherwise all you can do is wait for Xiaomi to update their A12 firmware.
Click to expand...
Click to collapse
No , it is not true. The last update for EEA is
V13.0.10 RKEEUXM...
Sorry i didnt see. Yes you are right. With Android 12.