Hi everyone
I have installed custom ROM and CWM recovery from another forum(which is currently unavailable)
Phone worked perfectly a couple of months, then it turned off and i couldn't turn it on.
Phone repair service recommended to change motherboard, but i refused and took phone back.
Fortunately, i could enter bootloader menu after that :victory:
But still some problems exist:crying:
Problem1:
when i turn phone on, it shows HTC logo for some time and then turns off.
Problem2:
when i enter bootloader menu and try to enter Recovery - phone shows screen with HTC logo and warning "This build is for development purposes only..."
Seems that i need somehow to restore Recovery and then try to flash new firmware.
Or maybe there is some method to flash ROM directly from PC(via fastboot), i tryed to flash Recovery, but no result
Thanks in advance and sorry for my english
After trying to root my tablet with ZenFoneRoot, my Tablet went into Demo mode and I couldn't use it at all. I tried flashing with the classic ASUS method (putting the firmware on the SD and updating) but after the update completed, demo mode was still there. So I went into fastboot mode and did a "fastboot wipe system", realising after that I can flash everything except for the system/ directory, which was not a .img file (duh, silly me).
If I select recovery from DroidBoot, I get a message saying "Installing system update" followed by "Error" and that's it... no recovery menu, no nothing.
What should I do to recover my tablet?
Here are the contents of my update zip file from ASUS.
http ://i.imgur.com/LT5SDMj.png
After some research I flashed the WW_MeMo_Pad-11.2.3.17.3-2014100 droidboot (fastboot.img), boot and splashimage and now I can:
fastboot -w -i 0x0b05 flash update UL-K017-WW-11.2.3.21-user.zip
But I get the following error
E: unable to rename file /cache/update.zip: Cross-device link
Tried doing a
fastboot erase cache
without any luck...
Do you guys have any ideas?
Also tried creating a yaffs2 image using "mkyaffs2 system/" but I get a zlink: Invalid Arguments error
A few days later, I contacted Asus, explained the problem and they asked me to send my tablet somewhere out of town and I have to pay for the service (which I think will cost me 50% of the tablet's value). Well this didn't help at all.
I even tried writing a bash script that would fastboot flash system/path for every file in the system directory (yes, flashing ~1000 files took me 30 minutes). But the tablet won't start, even though the files are there and I wiped the system & cache partition before. I still don't understand how the recovery option works or why "wipe data" gives me an error. All I need is a valid system.img file, that's all.
From my research, I'm starting to think that the .zips are signed with SignAPK.
Sorry for asking this question, over and over again. I just want to share my progress with this, seeing that there are some posts without replys regarding this product and with the same problem).
What if I compile Android, copy the libs/ and etc/ directories and flash the resulting system.img (will try this tomorrow).
Thank you!
AndroidDestoryer said:
After trying to root my tablet with ZenFoneRoot, my Tablet went into Demo mode and I couldn't use it at all. I tried flashing with the classic ASUS method (putting the firmware on the SD and updating) but after the update completed, demo mode was still there. So I went into fastboot mode and did a "fastboot wipe system", realising after that I can flash everything except for the system/ directory, which was not a .img file (duh, silly me).
If I select recovery from DroidBoot, I get a message saying "Installing system update" followed by "Error" and that's it... no recovery menu, no nothing.
What should I do to recover my tablet?
Here are the contents of my update zip file from ASUS.
http ://i.imgur.com/LT5SDMj.png
Click to expand...
Click to collapse
I am having the same problem .I cannot get into recovery mode,as u explained in above. i think RootZenFone app only works for android:4.3
Thanks for sharing
Same boat here
I tried rooting my ME70C/K01A with RootZenFone-1.4.5r.apk.
Unfortunately I tried it after the 4.4.2 update and now I seem to be stuck in some sort of demo mode. There's a blue icon in the notification bar and I occasionally get a pop-up dialog saying that demo mode has stopped.
I purchased it just this week so I'm thinking back to the store it goes. Maybe I'll just stay with my Motorola Xoom..
bob
Well what I did since the last time I posted was:
- I successfully created a system.img image (using the tools in ADK) that I can flash into my MeMo pad, but the tablet doesn't boot even tough it was a successful flash Anddddd... I'm stuck at this point. Any more ideas?
To remove the offline demo in the notification in ME70C
To remove the offline demo in the notification
1. Enable developer mode in tab.
2. Download APD_offline_ME70C.zip and follow the step mentioned in contentupdateSOP0624.pdf.Once you go thought all the step mentioned .Tab will start playing the demo. (Note:-it will to update around 4-5mins, you check in notification bar)
3. Now need to deactivate the demo mode.
When the demo video playing on screen
Hold Back Key for more than 10 seconds, until is shows a page to key in password 741603.
The tab will automatically reboot and wipe all user data and deactivate demo mode.
Wait until factory reset complete. Once everything is finished tab will boot up with welcome screen
In this process the tab will be factory reset .So backup the data
I found the APD file and contenASUS website
Successfully rooted Asus Memo Pad(Me70c)K01A
1. Go to setting- Developer Option and enable USB Debugging.
2. Wi-Fi and forget network (if had connected access point).
3. Disable Wi-Fi and put the tab in Airplane mode.
4. Download and install RootZenFone-1.4.6r.apk
5. Then run the app. Below press the button “ok I know, please root!” . A warning will pop up just press ”OK”. It may take around 2-3 mins to finish; mean time will show message that demo mode active.
6. Check the notification bar there should be brown the update finish.
7. Power off the tab and boot to boot-loader and then select recovery.
8. The tab will restart to recovery and automatically make system update and gives an error and reboot the tab.
Now there must be SuperSU installed in app list. Then just update the SuperSU app from the play store.
Tested on
Model Number
K01A
Android version
4.4.2
Kernel version
3.10.20 [email protected] # 1TueNov 11 14:34:52CST 2014
Build number
KVT49L.WW_MeMO_Pad-11.2.3.21-20141111 release-keys 044000281_201406160030
Credit : shakalaca
dashu42332 said:
1. Go to setting- Developer Option and enable USB Debugging.
2. Wi-Fi and forget network (if had connected access point).
3. Disable Wi-Fi and put the tab in Airplane mode.
4. Download and install RootZenFone-1.4.6r.apk
5. Then run the app. Below press the button “ok I know, please root!” . A warning will pop up just press ”OK”. It may take around 2-3 mins to finish; mean time will show message that demo mode active.
6. Check the notification bar there should be brown the update finish.
7. Power off the tab and boot to boot-loader and then select recovery.
8. The tab will restart to recovery and automatically make system update and gives an error and reboot the tab.
Now there must be SuperSU installed in app list. Then just update the SuperSU app from the play store.
Tested on
Model Number
K01A
Android version
4.4.2
Kernel version
3.10.20 [email protected] # 1TueNov 11 14:34:52CST 2014
Build number
KVT49L.WW_MeMO_Pad-11.2.3.21-20141111 release-keys 044000281_201406160030
Credit : shakalaca
Click to expand...
Click to collapse
Hi I am pretty new with this, in step 7. Power off the tab and boot to boot-loader and then select recovery.<-----How do you boot to bootloader?
el_rolas said:
Hi I am pretty new with this, in step 7. Power off the tab and boot to boot-loader and then select recovery.<-----How do you boot to bootloader?
Click to expand...
Click to collapse
I found this thread while looking for a way to unlock the bootloader but I did not do step 7 - I used 1.46r (attached), installed it, forgot network, went to airplane mode, ran Root Zenphone and then rebooted (not to recovery) and I am now rooted with Busybox installed and not in Demo Mode (and didn't have to disable it)
el_rolas said:
Hi I am pretty new with this, in step 7. Power off the tab and boot to boot-loader and then select recovery.<-----How do you boot to bootloader?
Click to expand...
Click to collapse
while boot holding down the volume up+ power button till asus logo.Then release button this will land-up in boot-loader,there you can select recovery.It will automatically boot recovery does the remaining things.
Worked great on my
BestBuy, Asus - MeMO Pad 7 - 8GB - Black
Model: ME70C-8G-BK SKU: 8770005
Thank you!
themykel said:
I found this thread while looking for a way to unlock the bootloader but I did not do step 7 - I used 1.46r (attached), installed it, forgot network, went to airplane mode, ran Root Zenphone and then rebooted (not to recovery) and I am now rooted with Busybox installed and not in Demo Mode (and didn't have to disable it)
Click to expand...
Click to collapse
Work perfectly
version KVT49L_WW_MeMO_Pad-11.2.3.27-20141223 release-keys 044000281_201406160030 (vary strange that this version is not presente in Asus site...)
---------- Post added at 08:05 AM ---------- Previous post was at 07:55 AM ----------
dashu42332 said:
To remove the offline demo in the notification
1. Enable developer mode in tab.
2. Download and follow the step mentioned in .Once you go thought all the step mentioned .Tab will start playing the demo. (Note:-it will to update around 4-5mins, you check in notification bar)
3. Now need to deactivate the demo mode.
When the demo video playing on screen
Hold Back Key for more than 10 seconds, until is shows a page to key in password 741603.
The tab will automatically reboot and wipe all user data and deactivate demo mode.
Wait until factory reset complete. Once everything is finished tab will boot up with welcome screen
In this process the tab will be factory reset .So backup the data
I found the APD file and contenASUS website
Click to expand...
Click to collapse
Hi I have the same issue, but I have no success with "Hold Back Key", when video is playing his entering after few seconds in full screen and back key from the screen dissapear. Please can you help me with that. Thanks!
Chk out this video .This will help out deactivation of demo mode http://youtu.be/vptHAKTvoyw ...
If still don't work ,better to factory reset and try the step from the beginning
I cannot get into Recovery Mode. I boot into Fastboot, select Recovery mode, unit reboots, see the ASUS logo and then it hangs and eventually goes to a blank screen. Almost like the recovery partition is empty.
I was trying to restore my tablet back to a fresh install so I ran (in fastboot mode):
fastboot erase system
fastboot erase userdata
fastboot erase cache
How can I get stock recovery back? All I can do it get into fastboot mode. Unit has no OS on it now since I wiped the system partition.
Hello a few days i restored my galaxy to factory settings from inside the own phone settings everything was working fine until a couple days ago the phone started to rebooting every now and then
Right now is stuck on the samsung logo after you turn it on and in the recovery menu i got this error
E: failed to mount /efs (invalid argument)
I try to wipe the cache date and even doing a wipe from the recovery menu but nothing when the phone turn on and gets to the samsung logo it stays there a while and reboots again
I try doing this instructions from this post from another forum
The key for me was selecting the second item in the Tools menu (Firmware Upgrade and Initialisation?) - it seemed to bypass that whole 'connecting' process and just went to work. Here's the writeup that I put together (I need to insert the Kies screenshots that I captured).
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
I manage to do all the steps but nothing now the phone turns on and it gets stuck on the samsung logo but this time it doesn't reboot it just stays there and in the recovery menu still have the same error
Does anyone have any solucion or a guide that explaings well how can i fix this?
I have seen other guides that saids i need to either root the phone and install a custom recovery menu but since the phone doesn't boot i have no clue how to do this
Edit: A few moments ago i tried doing this as well (i cant post the complete youtube link)
watch?v=xJMJLdzHaAY
The phone now turn on but i have a black box with some yellow letters i'm guessing is the called safe mode is there anything i can do from here?
Been honest i'm completely lost here
Can someone please give a valid link to download?
Edit: Sorry, wrong post.
You can try flashing a recovery (cwm official is best) via odin but most likely you'll need to flash a stock rom, definitely if the cwm flash doesn't solve it.
Beamed in by telepathy.
shivadow said:
You can try flashing a recovery (cwm official is best) via odin but most likely you'll need to flash a stock rom, definitely if the cwm flash doesn't solve it.
Beamed in by telepathy.
Click to expand...
Click to collapse
is there any tutorial on how to that for the I9300? because i to be honest without a tutorial i dont have a clue on how to start doing this, i will actually prefer a stock rom is by stock rom is a official firmware from samsung
Hi all, my question prescinds from a phone particular model. The problem is that for some sort of software issue, the phone restarts itself after few seconds that rom unlock appear. I'm sure that is a sw issue because in recovery mode it stays alive and when he does the application update after a dalvik cache wipe, all goes well too!
It's not possible to enable usb debug because it restarts too soon and in recovery (cwm) it's not possible to connect via adb. It's not a rooted phone. Also in safe mode it stucks in bootloop
What i can do before a factory reset?
phantastic_ said:
Hi all, my question prescinds from a phone particular model. The problem is that for some sort of software issue, the phone restarts itself after few seconds that rom unlock appear. I'm sure that is a sw issue because in recovery mode it stays alive and when he does the application update after a dalvik cache wipe, all goes well too!
It's not possible to enable usb debug because it restarts too soon and in recovery (cwm) it's not possible to connect via adb. It's not a rooted phone. Also in safe mode it stucks in bootloop
What i can do before a factory reset?
Click to expand...
Click to collapse
Looks like its bootlooping ... Yes its a software issue ... I don't think u have any option other than factory reset ... Take a backup first before u do that...or perhaps u can use a logcat if u know what it is
i will try to take backup in sd card and retrieve some useful data from this.
how can i use logcat if can't connect through adb?
hello guys
ive bought this oppo realme 1 phone
ive installed substrantum theme app.........
but to install overlays the phone needs to reboot which realme1 doesnt have
it only shows poweroff option
is there any way to reboot the phone?
note : im on latest software version on realme1
rightnow not possible.. and
substratum will also not work bcoz
it needs root access..
Turn it off and turn it back on?
Oppo Realme 1 Restart
goldynaidu said:
hello guys
ive bought this oppo realme 1 phone
ive installed substrantum theme app.........
but to install overlays the phone needs to reboot which realme1 doesnt have
it only shows poweroff option
is there any way to reboot the phone?
note : im on latest software version on realme1
Click to expand...
Click to collapse
Try dis.
To restart Oppo Realme 1 device,
just hold the power button and volume + simultaneously for few seconds untill you see Oppo/Realme logo
then release the power button and volume key it will restart.
Hope this helps.
Loop
Hello guys,
I followed the process of unlocking bootloader and root the phone. After rebooting the device it got stuck on loop. Keeps restarting. I can only take it to recovery option, no option for fastboot...what should I do now.
Saritkgp2014 said:
Hello guys,
I followed the process of unlocking bootloader and root the phone. After rebooting the device it got stuck on loop. Keeps restarting. I can only take it to recovery option, no option for fastboot...what should I do now.
Click to expand...
Click to collapse
go to recovery and install ota.zip. it will boot.
Loop
But the OTG does not show up...I do not have a sdcard...so are you saying I need to tranfer the ota firmware into sdcard and update it from recovery manager.
Im unable to hard reset the real me1. When i try to wipe data.. it asks for my password which i have forgotten...