hello .
I have a problem after flashing this rom.
I flash the rom via usb burning tool.
but at the moment to remove the bootloader, the box is disconnected from the pc and so there was an error message.
since, I have no more signal on the hdmi of my television!
I managed to flash the rom again but nothing to do, still no hdmi signal.
Do you have a solution?
PS: Would it be possible to have a link to a stock rom to restore everything again? thank you .
EDIT: i have flashed a stock firmware and the CVBS (av) signal work but the hdmi dont work animore!
up, noting?
Same problem here... someone could help? No Screen , tried to unbrick by flashing stock Firmware via Burn Card Maker and USB Burning Tool.
Have no Logo Screen, no Recovery screen , nothing...
:/ TeVioN
Use this
https://forum.xda-developers.com/an...m-xtmod-atv-x96-max-gt1-u211-devices-t3892273
Related
Hi
Sorry to bother, but i just got a new Star B92M but im having a rough time trying to update it and flash it with SP Flash Tool
So far, i have tried this
To flash with the SP_Flash_Tool_v3.1224.01 (i get BROM 3013 error)
To flash with the SP_Flash_Tool_v3.1224.0.sn85 ( i get the 8038 error)
I have tried to run each of them as administrator
I have tried to click on Firmware-> Upgrade as someone suggested on a post
I have installed the preloader drivers
I have tried by taking our the battery and plugging in then put the battery on
But i havent been able to flash it. The phone is not bricked, it runs as nothing has happened, i do think although, that recovery is messed after so many tries since there is the red triangle when i try it.
I dont know if it is normal, but everytime i plug the phone when its off for flashing, is like it gets connected by usb for 2 seconds then disconnected, but its weird because when the phone is on, the usb works like charms, no problems on computer ports either or the usb cable, it just happens when i connect it when the phone is off (preloader i guess), yet i have installed the proper drivers read in many tutorials
Is there any other way to flash it? or any solution to this problem? Sorry for the bad english
Thanks in advance.
Hello all!
I'm new there but I'm not capable of finding any solution to my problem. I tried on my phone customRom named MysitcOS v6 (for Xaomi redmi note) ported to my device. I got only booting phone without IMEI and baseband unknown. Flashing NVRAM.bin (from stock) using flash tool didnt help. On this rom usb is working fine. When I flashed whole stock rom using sp flash tool including nvram. Almost everything is working well. When I plug usb to phone it charges only and in device manager there are no changes. I must reboot phone wuth usb plugged every time I want establish usb connection. When I flash back Mystic os from recovery USB is working fine again and after every stock rom flash usb doesnt work well. Do you ave any ideas why this happens and maybe how to get rid of this problem? Thanks in advance.
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)
couple days ago i tried to update it and it must of been the wrong firmware as now i have no blue light or picture
i tried to flash it with amlogic usb burning tool but it gets stuck at 2% and says usb control setup error
any help appreciated
Its good that u can still flash via usb burn tool.
Try another firmware .
Usually happens when u try to flash wrong file
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
hi, i would reccomend my android TV 7 ROM for nexbox a95x devices, fast & stable, as for device not being detected by burn tool, you've tried multiple ports on your PC & box?
It will be nice if you can provide me a stable rom for my A95x
Can you please provide me some link to download it.
About the burning tool and the ports....i have 2 USB ports. I've try in both of them. In one of the port i'm managing to connect it to the burning tool but after few minutes i'm loosing the connection for unknown reason for me. I'm suspecting that maybe due to a issue with the images with which i try to install with the USB burning tool.
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
I had no problem to install atvx into exactly same device.
Keep a95x disconnected from everything. Press AV button and hold it while you plug usb cable to right usb port. You mustn't plug power cable. Only usb.
You windows will connect to a95x if amlogic tool is running
And if that dosntvwork then you may need to use mask rom mode to force burning tool to see the device
aidanmacgregor said:
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
Click to expand...
Click to collapse
Hi Aidan, I flashed my a95x 2/16 with your rom and it’s just stuck on boot screen, when I try flash again it fails with usb burning tool, any suggestions?