Hello all!
I'm new there but I'm not capable of finding any solution to my problem. I tried on my phone customRom named MysitcOS v6 (for Xaomi redmi note) ported to my device. I got only booting phone without IMEI and baseband unknown. Flashing NVRAM.bin (from stock) using flash tool didnt help. On this rom usb is working fine. When I flashed whole stock rom using sp flash tool including nvram. Almost everything is working well. When I plug usb to phone it charges only and in device manager there are no changes. I must reboot phone wuth usb plugged every time I want establish usb connection. When I flash back Mystic os from recovery USB is working fine again and after every stock rom flash usb doesnt work well. Do you ave any ideas why this happens and maybe how to get rid of this problem? Thanks in advance.
Related
Hi guys, i'm Claudio. I'm new to this xda community and before i start i want to thank you in advice for your help and i want to sorry for my bad english ^^.
Two days ago my Redmi note 3 pro had a random reboot during charging and it stops booting up, with AC adapter it shows only a blinking red light. I tried everything and finally manage to boot into fastboot mode by removing the case and disconnect battery pins and reconnect them. Now every time my phone accidentaly or not reboots with the AC adapter attached, it dies and i need to open case again and disconnect battery pins.
P.S. I can charge my phone without any problems.
This i not the only problem i have now:
- OTG does not work anymore, system do not detects any kind of usb device, Pendrive, Mouse, Keyboards, Gamepads etc.
- In Settings USB options are not present anymore (MTP for exemple), tried any kind of programs and drivers.
- I cannot disable VoLTE.
- My PC shows "Device not recognized" when i connect my phone. It acts like my PC did not manage to read phone firmware and don't know what kind of device i connect.
Strage thing is that i manage to manually install Marshall Bootloader ADB drivers and now i can flash roms with fastboot method.
As you can see is not a problem caused by damaged data usb pins because i can flash ROM's, Recovery mods etc. It may be a problem caused by a damaged partition, maybe a locked one witch i cannot flash using Miflash tool but here guys i need your help because i don't have any experience with nandroid backups, partitions.
Actual configuration:
Miui Stable 7.3.7.0 (also tried miui 8 global developer, nothing changes)
Radon 2.3 kernel (even with stock kernel nothing changes)
Bootloader officially unlocked
I will give you any kind of information you want, and i will try everything. No problem if i lose my data. Thank you guys! :good:
After i got bootloop, i flashed aosp-ex, after that otg does not work anymore and usb connection option was not showing. I tried to go back to stock. I flashed miui 10 but the problem still persist. I thought maybe it was just a bug in miui 10 since it still in beta. I then downgraded to miui 9 but my problem is still there. I tried again flashing custom rom using lineage but still otg and usb problem still exist. Someone help me! Otg and usb options works fine before i got bootloop. My phone can still charge. I've also enabled usb debugging and selected mtp in usb configuration in developer options. HELP!
This is the logcat of my device.
Exactly the same happened to me when going from android 7 custom ROM to 8. I had a bootloop, flashed the right recovery and tried again, but after that computer and phone doesn't recognize usb connection (only in flashing mode). Tried different ROMs and PCs and flashing stock, but the problem persists. Any help would be welcome.
R-Line said:
Exactly the same happened to me when going from android 7 custom ROM to 8. I had a bootloop, flashed the right recovery and tried again, but after that computer and phone doesn't recognize usb connection (only in flashing mode). Tried different ROMs and PCs and flashing stock, but the problem persists. Any help would be welcome.
Click to expand...
Click to collapse
Have you fix it now?
hello .
I have a problem after flashing this rom.
I flash the rom via usb burning tool.
but at the moment to remove the bootloader, the box is disconnected from the pc and so there was an error message.
since, I have no more signal on the hdmi of my television!
I managed to flash the rom again but nothing to do, still no hdmi signal.
Do you have a solution?
PS: Would it be possible to have a link to a stock rom to restore everything again? thank you .
EDIT: i have flashed a stock firmware and the CVBS (av) signal work but the hdmi dont work animore!
up, noting?
Same problem here... someone could help? No Screen , tried to unbrick by flashing stock Firmware via Burn Card Maker and USB Burning Tool.
Have no Logo Screen, no Recovery screen , nothing...
:/ TeVioN
Use this
https://forum.xda-developers.com/an...m-xtmod-atv-x96-max-gt1-u211-devices-t3892273
So after updating the phone to miui 11, the file transfer mtp using USB was not working...
Tried everything, installing drivers, changing pc, cable. lit every possible thing...
Finally decided to flash an older version of rom.
it was successful, but still, usb file transfer was not working.
So, thought to install custom rom, and for that, i installed twrp, and by mistake, i cleaned everything including the system.
now, my phone got dead. but still, fastboot bootloader mode was working, So, I tried a different bunch of commands that I found over internet. but nothing worked.
So, again I flashed the stock rom using mi tool, and it broke the last working thing also(fastboot screen).. and my phone stuck in a loop. it just vibrates and turns on-off without any indication on-screen(no Mi logo, no charging light, nothing)...
at last, tried EDL mode, but still no luck, i tried different version of stock rom using EDL mode also. nothing working....
Need help to fix this phone.
I had a J6, just rooted months ago. Everything was fine, I got it rooted successfully, and today I just updated Magisk this afternoon and restart it. And it got bootloop.
I don't know what to do so I wipe data and cache partition. It didn't help
My phone can't connect to my laptop, Odin didn't detect my phone, Installing Samsung USB Drivers didn't help
My phone could only go to recovery mode and go to Downloading mode
Can anyone help me plz?
Try to reflash the stock rom maybe
Hello,
is your phone a SM-J600FN/DS? And how do you root?
Thanks
Efcegames said:
Try to reflash the stock rom maybe
Click to expand...
Click to collapse
To reflash the stock ROM we need Odin to detect my phone to flash. It didn't detect anything (despite already have Samsung USB Driver). I was stupid not installing TWRP before rooting my phone. What should I do now?
[SOLVED]: IT WAS THE CABLE PROBLEM​
It turns out that the problem all along was the cable. I had 2 Micro USB cables and none of them connect the phone to computer, only in charge mode
So I borrowed my mom's Xiaomi cable and it worked perfectly. Just connect to computer, open Odin and flash the stock ROM back.
After this incident I don't feel like I want to root phone. It was good but it seems to me that Magisk has a lot of problems right now... Or probably just me