Hi guys, i'm Claudio. I'm new to this xda community and before i start i want to thank you in advice for your help and i want to sorry for my bad english ^^.
Two days ago my Redmi note 3 pro had a random reboot during charging and it stops booting up, with AC adapter it shows only a blinking red light. I tried everything and finally manage to boot into fastboot mode by removing the case and disconnect battery pins and reconnect them. Now every time my phone accidentaly or not reboots with the AC adapter attached, it dies and i need to open case again and disconnect battery pins.
P.S. I can charge my phone without any problems.
This i not the only problem i have now:
- OTG does not work anymore, system do not detects any kind of usb device, Pendrive, Mouse, Keyboards, Gamepads etc.
- In Settings USB options are not present anymore (MTP for exemple), tried any kind of programs and drivers.
- I cannot disable VoLTE.
- My PC shows "Device not recognized" when i connect my phone. It acts like my PC did not manage to read phone firmware and don't know what kind of device i connect.
Strage thing is that i manage to manually install Marshall Bootloader ADB drivers and now i can flash roms with fastboot method.
As you can see is not a problem caused by damaged data usb pins because i can flash ROM's, Recovery mods etc. It may be a problem caused by a damaged partition, maybe a locked one witch i cannot flash using Miflash tool but here guys i need your help because i don't have any experience with nandroid backups, partitions.
Actual configuration:
Miui Stable 7.3.7.0 (also tried miui 8 global developer, nothing changes)
Radon 2.3 kernel (even with stock kernel nothing changes)
Bootloader officially unlocked
I will give you any kind of information you want, and i will try everything. No problem if i lose my data. Thank you guys! :good:
Related
Hello all!
I'm new there but I'm not capable of finding any solution to my problem. I tried on my phone customRom named MysitcOS v6 (for Xaomi redmi note) ported to my device. I got only booting phone without IMEI and baseband unknown. Flashing NVRAM.bin (from stock) using flash tool didnt help. On this rom usb is working fine. When I flashed whole stock rom using sp flash tool including nvram. Almost everything is working well. When I plug usb to phone it charges only and in device manager there are no changes. I must reboot phone wuth usb plugged every time I want establish usb connection. When I flash back Mystic os from recovery USB is working fine again and after every stock rom flash usb doesnt work well. Do you ave any ideas why this happens and maybe how to get rid of this problem? Thanks in advance.
Hi,
I got my new phone a couple of days back, installed CM13 (officially unlocked, did that with TWRP + install ROM) probably incorrectly because i couldn't get the fingerprint sensor and other stuff to work at all.
Today my phone turned off by itself with around 70% of battery left and it's not responding anymore. Cannot go into Recovery mode, not even to Fastboot. Connected it to the charger and have the red light of the devil blinking... Tried to do everything i found online but i couldn't get into EDL mode (and then Flash through MiFlash), since fastboot is not working at all.
I really don't wanna have to open the back of the phone and. What can i do to save the phone? Is there any proven solution and a comprehensive guide to this (for a total idiot like me)?
Yes there is deep flash cable method search on xda/youtube it works like a charm,😉, this method saved me once
Try this (http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055) works 100%
Try to disconnect and reconnect the battery.
This has kicked me into EDL mode once and after flashing it was fine
Both methods are sound, but if you decide to remove the back cover, remember to eject the SIM card tray first
Thanks for the replies, i was hoping i wouldn't have to have to open the back cover and disconnect the battery but it seems to be the only option at this point.
The deep flash cable doesn't seem that difficult tho, why don't you give it a shot? It seems like that's what they use at MI service centres after all.
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device, but when i try to flash a stable MIUI rom i get an error: "Write timed out" as many times i tried to do it.
Does anybody have a suggestion?
My device was unlocked officially and i have no recovery no fastboot nothing at all.
alphax_ said:
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device,
Click to expand...
Click to collapse
Which method you used - Deep Flash cable or Battery disconnect?
Yeah sorry i did not mention it, disconnected the battery.
i tried the battery removing method but the phone is not responding
now need to try cable method
Ryan Raghendh said:
i tried the battery removing method but the phone is not responding
now need to try cable method
Click to expand...
Click to collapse
Get into EDL
Hello!
I've been having this problem out of the blue with my BQ Aquaris E5 phone: it does not respond to any USB connection (either to the PC or charger) if the phone is on. If I keep the cable connected and then restart, it will charge without problems. Once the cable is removed, it won't charge if I connect it again (until next reboot). If I restart the device without cable and then connect one, it won't work either. I did a factory reset, which did not do the trick; and even flashed the device with the latest ROM, also without effect.
Any idea of what could be the problem? I have not found anyone having the same problem, and solutions such as modifying the USB profile in the developers mode or clearing the cache partition has not done the trick.
I have this problem on a Leagoo Kiicaa MIX and tried the same things before I found this post. Did you figure it out?
Guys, sorry in advance if this question is kind of a duplicate, but really I spent hours here to find some solution.
I am affraid I am in a deep ****, but I need your confirmation, 'cause you are the experts.
Will make it quick and simple.
Model: Huawei P9 lite 2016
Physical Status: damaged black display, not reacting. New display(s) not working at all. Buttons are fine.
Logical status: USB debugging and other stuff is OFF, OTG is even maybe not supported. I was using HiSuite only and I had to everytime manually confirm that I want e.g. FileTrasfer. Noq I can start up the phone (even log in I think thanks to FingerPrint) and HiSuite partition appears (but not the one with data of course).
What I already tried: I installed ADB and FASTBOOT to my PC. I am able to see my phone in FASTBOOT mode only. I am starting the phone with VOL- and insterting USB cable. However due to all the functions like USB debug off, I am not able to finish any task to unlock anyting or to load another image etc. All is forbidden. When running ADB.EXE, no device is found, no matter in which mode I boot up the phone.
Again, I think this is because of disabled USB debugging mode and I have no chance to change it using standard GUI.
Any hint or am I really done?
Thanks a lot.
Hi
I do not know what to do more.
Symptom: Connect usb cable to pc, no reaction of pc, only charging. Windows 10
Reinstall all the driver several time,
Try maybe 10 different usb cable, nothing.
Try on 2 other pc, nothing (no reaction of pc, no bells) only charging
Also, It do not connect anymore my car, (was functioning properly)
Redmi note 3 Kate
Android 6.0.1 mmb29m
security android 2018-07-01
MIUI Global 10.2.1.0 MHRMIXM
I have usb debugging on,
try install usb, nothing
usb config, charge only, mtp, ptp, nothing
I change the usb board in the redmi, no change, grrrrr
WTF
I has been several months I try to enable the usb data transfert without any result.
Suggestion? except to change the phone, I have no more ideas.
But everything else is working properly in the telephone.....
Regards
JF
Lachaine said:
Hi
I do not know what to do more.
Symptom: Connect usb cable to pc, no reaction of pc, only charging. Windows 10
Reinstall all the driver several time,
Try maybe 10 different usb cable, nothing.
Try on 2 other pc, nothing (no reaction of pc, no bells) only charging
Also, It do not connect anymore my car, (was functioning properly)
Redmi note 3 Kate
Android 6.0.1 mmb29m
security android 2018-07-01
MIUI Global 10.2.1.0 MHRMIXM
I have usb debugging on,
try install usb, nothing
usb config, charge only, mtp, ptp, nothing
I change the usb board in the redmi, no change, grrrrr
WTF
I has been several months I try to enable the usb data transfert without any result.
Suggestion? except to change the phone, I have no more ideas.
But everything else is working properly in the telephone.....
Regards
JF
Click to expand...
Click to collapse
Put phone in fastboot mode.
Download latest kate fastboot rom
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Extract the downloaded fastboot rom zip.
install and run miflash tool on win64 bit pc
Select "clean flash " option in miflash tool
Flash it
Like I said, I have no possibility to connect any pc. Need to work in the cell, only. I can transfert file via wi-fi only. Thanks
Lachaine said:
Like I said, I have no possibility to connect any pc. Need to work in the cell, only. I can transfert file via wi-fi only. Thanks
Click to expand...
Click to collapse
Try to find a replacement Charging Jack PCB and replace it, if it still doesn't work then there's something else causing problem with your device. Also have you tried a different PC?
Already replaced