Hi, excuse for my bad english
My Problem is: I have a bug on my tablet, I no longer have access to OTG or USB.
So I want to go back to an original firmware to fix the tablet.
But as I have no access to ODIN. No USB or OTG
I would like to flash my tablet with AP BL CP CSC files from my tablet.
How to turn these files into zip for TRWP to install.
Or else how to do that.
My tablet is a Galaxy Tab E
T377WVLU3BRG4
Android 7.1.1
Samsung version 8.5
Thank you Very Much!
Related
Hello
I have a Galaxy Tab 10.1 4G SCH-i905 failed after flashing the firmware.
ODIN3 Download Mode
reason : force key
secure mode : secure
check signature : check
Custom Binary Download : Yes (8 counts)
Current Binary : Samsung Official
waiting usb cable...
Windows 7 no detect USB Cable.
Tested two USB cables.
Tested on two computers.
Recovery no work(Black Screen 10 second and restart)
PC detect my galaxy only in APX mode
C:\nvflash>nvflash.exe --bl bootloader.bin
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
dude same boat
same problem. i wasted soo much time , trying that batt draining solution, to no avail.
its been 4 months not working!!
US Cellular 4G SCH-i905 Brick
I have a US Cellular Tab that I can get into download mode and that is all. Does anyone know how to download a restore image for this tablet. I restored the vzw version, but the display is bad. Can not get my tab to work.
Wait riff box jtag...
Big time gangsta
Solution???
Has anyone found a solution to this issue, i too have been stuck in this process for quite some time :-(
I'm stuck already at 5 months, as I understood it to wait for support to riff box.
Here the second method but if it fits?
ASANSAM Dongle
April 28
ASANSAM VER 1.7.4 RELEASED(Add Unbrick)
Add Unbrick
====================
Samsung i905 Galaxy Tab 10.1
FreezzeeR said:
I'm stuck already at 5 months, as I understood it to wait for support to riff box.
Here the second method but if it fits?
ASANSAM Dongle
April 28
ASANSAM VER 1.7.4 RELEASED(Add Unbrick)
Add Unbrick
====================
Samsung i905 Galaxy Tab 10.1
Click to expand...
Click to collapse
I am also in the line. Can someone post a Nandroid backup so that we all can restore?
adventuressmalik said:
I am also in the line. Can someone post a Nandroid backup so that we all can restore?
Click to expand...
Click to collapse
I'm pretty sure I have the same problem. A Nandroid backup would be fantastic.
Hello!
I have the same problem!
Windows 7 no detect USB Cable.
Tested two USB cables.
Tested on two computers.
Recovery no work(Black Screen 10 second and restart)
Any advice or help? Thanks a lot!
I'm not have idea...
All the same, trying to flash the firmware on sgh-t859. Firmware hung, rebooted - got mode Download Mode, which sees USB, recovery is not loaded, the OS is not loaded. Just buttons vol + and vol - reversed. In the hands of both models have the Samsung Galaxy tab sch-i905 and sgh-t859 (analog p7500). Analyzed the two: in different hardware (different motherboard), most other parts analgichny. I believe that after a failed firmware bootloader pytaetsya connect to another USB, which in this model there is no.
evernote.com/shard/s290/sh/b9001d2e-a6df-499f-b3cc-8cf5a06aa481/4daa69a2bebe97956efbb39b76f357ac
solution yet?
any solution to this?
i can get into download mode, no cable detected.
cant nvflash
can boot into standard android and use the tablet.
I'm currently helping someone resolve this problem. I'll post a backup when he has booted his device up
:-: A TIP FROM THE NOOB :-: All ways backup your current rom before adding root apps, modifying system/system files, flashing zip files, or installing new rom. just to be on the safe side. do it now or regret it later
After a successful root I probably made mistake in editing "vold.fstab" (I want to change the sdcard1 for sdcard2) a tablet hangs when loading ( still spinning wheel and the system will not boot ) .
I download a recovery file by "nandroid" from some Czech Republic Android forum, put in on SD card but in CWM I'm still see that "restore not found". So I can not restore with this file.
Could someone help me?
Somebody said that update firmware can help, I have officialy firmware update in format img . PMP5101C_20131019_v1.0.8.img , but do the update through the program what official makes Prestigio requires the tablet is on (boot in system), which unfortunately is not possible .
Maybe it is possible to do it with RKAndroidTool, there can be tablet off (just turf off, push volume+ and connect cable) . But I dont know, what is the numbers in box " Address" for firmware update ((
Alternatively, maybe somebody can create a update.zip file for me, that I can use in the CWM and make a update with this and overwrite the "vold.fstab" to the original.
If someone help , I also like to reward for PayPal.
I do not want have a tablet for 200 EUR as a paperweight.
Sorry for my poooor english.
UP - Please help me.
dvd73 said:
UP - Please help me.
Click to expand...
Click to collapse
Do you have the files to root this device as i have CMW 6.03 installed, but when i use the SuperSU-v1.65.zip that came with it, it errors.
Please help as this is a great device from Maplins at a great price.
@dvd73
Not sure if you managed to fix your problem.
I messed up my framework-res.apk trying to get usb tether enabled and my 5101C also did not boot.
I reflashed my rom to v.1.0.11 from the official website according the instructions provided and it was like new.
No need to start it up, you only need to get to flash mode by holding vol+ while pluging in the usb, then RKbatchtool will recognize your tablet.
@happy2help
Try updating your rom to v.1.0.11 and then flashing the CWM recovery. Then download the latest SuperSU zip from xda and install the zip, this worked for me.
dvd73 said:
After a successful root I probably made mistake in editing "vold.fstab" (I want to change the sdcard1 for sdcard2) a tablet hangs when loading ( still spinning wheel and the system will not boot ) .
I download a recovery file by "nandroid" from some Czech Republic Android forum, put in on SD card but in CWM I'm still see that "restore not found". So I can not restore with this file.
Could someone help me?
Somebody said that update firmware can help, I have officialy firmware update in format img . PMP5101C_20131019_v1.0.8.img , but do the update through the program what official makes Prestigio requires the tablet is on (boot in system), which unfortunately is not possible .
Maybe it is possible to do it with RKAndroidTool, there can be tablet off (just turf off, push volume+ and connect cable) . But I dont know, what is the numbers in box " Address" for firmware update ((
Alternatively, maybe somebody can create a update.zip file for me, that I can use in the CWM and make a update with this and overwrite the "vold.fstab" to the original.
If someone help , I also like to reward for PayPal.
I do not want have a tablet for 200 EUR as a paperweight.
Sorry for my poooor english.
Click to expand...
Click to collapse
Ok, u must go to recovery. Volume + or - i dont remeber, and turn on tablet. When recovery apear, turn last position backup.... Prestigio have backup in system. When u do this, Android recovery to last what u doing. My English is worse as ur and i do this same too in this file. I think we can't change sdcard, system See microsd after Android turn on
So I was fiddling with my dad's spare phone that had a chinese rom and no GAPPS, so I flashed first flashed LENOVO K860i FlyUI rom based on 4.2.2 via custom recovery as it was a ZIP file. Later on due to some issues with the rom, I flashed another rom that originally belonged to K860 through the original recovery. The rom file was in SZB format, which is the original firmware's format, and that bricked the phone. The screen lights up but nothing comes on though I can hear the intro tone. I cannot go to the recovery either. Connecting with the USB cable lets me install its driver properly through its drive. I believe this Phone is partially bricked and can be recovered as the device lets me install its driver when connected . Therefore, I ask the experts to help me in getting this phone back to life. Thanking you in anticipation, cheers!
bumppppppppppppppppp
hello, please could you pass me the firmware stock for the AOC breeze mw0931 tablet please, I need it urgently since the manufacturer's page does not appear and I need to flash it because it hangs on the bootloader, modify the vold.fstab file and The system does not start but I still detect it as an ADB device. I made a backup of the original vold.fstab file, is there any way to put it back in the path "/etc" without having to flash it ?? the tablet is already root :crying::crying::crying: sorry for my bad english i use google translate.
Hello everybody I am after some help please.
I own an Abox a1 plus android box s905x. Somehow the original firmware became currupt but there are no original firmwares on the net that I can find to get this box up and running again. With this said i have managed to get it running again through trial and error with a different rom.
The only thing is I am in need of the original remote.conf file to get the remote working again can anybody help as I fear i have run out of options.
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
djmagma59 said:
Hi, Same request, i have remove many apps on original firmware and don't work after reboot, i flash nexbox 7.1 firmware all work fine but miss remote.conf original (Abox A1 plus 8gb/2gb - s905x, firmware original is marshmallow).
Thanks in advance.
Click to expand...
Click to collapse
This exactly the firmware I got my Abox A1 plus running with too. It works brilliantly with no mods. I just needs that remote.conf file afaik.
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
samuau said:
I can't get any firmware to work on my Abox A1 Plus. It always gets stuck on the logo. Where did you download your firmware from?
Click to expand...
Click to collapse
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
But if you have original again work backup your remote.conf in system/etc/, or remote dont work after upgrade. (and if you can backup, please post here your remote.conf file) thanks.
Sorry for bad english, i'm french.
Edit : I search for repair and i found we don't have a remote.conf but our file named remote_mouse2.tab
i found my factory code via dmesg –c on ssh and it's recognized, now i remap function one by one
The power on keycode is hardcoded in bootloader (and with this rom is different from original). All key work but if box off, power on with remote don't work.
Delete this please :/
djmagma59 said:
Hi, take one firmware here but respect your memory configuration (2Gb ram and 8 Gb rom = 2-8G).
mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!hlJDxRxQ
(add https before for full address, i don't have acces post link ^^ )
Click to expand...
Click to collapse
Thanks for the link djmagma59! I already tried this specific firmware, but I get the burning tool error at 98% (see above). I'll try again tho. If I install the 6.0 version of the firmware the installation goes through, but the box gets stuck on boot (logo).
Did you have any issues installing it? Any ideas for me to try to solve it?
Again, I appreciate the help.
Hey I don't know if you still need it but I was looking for help myself and foud this thread, I have this box, it came with with 7.1.2 tho, I'm attaching the remote.conf file for you.
Need Basic Help for Resolving REboot Problem
Hi All,
I am facing loading my Abox A1 Plus . The screen is stuck reboot (bootloading). I can see options like Update using EXT , Update using ADB and so on. I tried Loading Zipped img files onto the USB and then update using EXt. But getting Signature Verification Failed Error. What are the basic steps as I could not find my device even after using AMLogic USB Tool.
Thanks in Advnace