Hi... I unlocked bootloader for my (Letv Le 1s X507) through adb, and phone got bricked ( Just keeps rebooting itself ). I tried flashing various stock ROMs through SP Flash tool (Download Agent - MTKAllinone.bin) and ROM scatter file, but the progress on SP tool never goes beyond 0%.
Then I started experimenting with SP flash, I tried selecting (Download Agent - DApl.bin) and download only boot,recovery it goes successfully. The issue is with Preloader file when I download it, it gives different errors.
I'm using Win7 - 32 bit. Tried different Vcom drivers, changing port / cable / ROMs / SP versions nothing works. I'm stuck
Thanks for reading this & Please Help.
Try un checking preloader in sp flash tool. And make sure to load the all in one da bin file in download agent.
Related
hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed
I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.
This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00
I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.
I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.
I have also tried using different USB ports with the same results.
If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.
I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed.
I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed:
My phone xtouch PF73 gives me this message "decrypt error, boot failed" after i tried flashing it.
I have tried two more ROMS but with those i get the "S_NOT_ENOUGH_STORAGE(1011) error message in both SP Flash tool and WiseLink Tool"
Android version: 4.22
MTK platform : MT6572
I used
SP Flash Tool v5.1352.01
SP Flash Tool v5.1628
wise tool v4.6.0.44
How can i fix it?
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
nyado said:
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
Click to expand...
Click to collapse
Reason:
The firmware(s) you are trying to flash to your MTK device is larger than the available space allocated for the firmware in the phone’s storage space.
Possible fix ( was not tested by me ):
Click on the Format Tab
Select/tick Format whole Flash and click the Start button before connecting your device.
Once the formatting is done, go to the Download Tab and select just the Preloader file first and flash it.
After the preloader.bin has been successfully flashed to your device, tick the rest of the firmware files and flash as well.
Hi... I unlocked bootloader for my (Letv Le 1s X507) through adb, and phone got bricked ( Just keeps rebooting itself ). I tried flashing various stock ROMs through SP Flash tool (Download Agent - MTKAllinone.bin) and ROM scatter file, but the progress on SP tool never goes beyond 0%.
Then I started experimenting with SP flash, I tried selecting (Download Agent - DApl.bin) and download only boot,recovery it goes successfully. The issue is with Preloader file when I download it, it gives different errors.
I'm using Win7 - 32 bit. Tried different Vcom drivers, changing port / cable / ROMs / SP versions nothing works. I'm stuck
Thanks for reading this & Please Help.
UPDATE - Issue Resolved.
Here's what I did, Used SP flash to download boot, system, recovery etc everything except Bootloader. Because boot loader was the culprit here which was not getting flashed ( Still don't know what's the issue but I doubt it's Win 7 - 32bit driver issue ). So gave it around 2 hours with SP flash, again the progress was 0% throughout still gave it time. And I think it was actually flashing.
And then I got stock recovery, then flashed stock rom by otg through stock recovery. Still it gave same bootloops, but I got into Fastboot. Now the game starts, ran ADB commands flashed twrp. Already had nandroid, flashed it. Finally flashed RR 5.85 this time it booted up without any issues. :laugh:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
I am facing the same problem. No fastboot, no recover, only a redmi log and repeat.
I do not know what to do. If you found the solution, please share
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
tutorial to fix your device
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com