hello, after an attempt to demote my honor 8x emui9 to 8 with FinderFirmware on PC and hisuite I end up with my phone with the notification led flashing green and red. I can not light it anymore and the led flashes all the time. how to do ?
Try to erecovery? Google helps ?
I can not access it ...
If this helps?
https://pro-teammt.ru/en/multi-tool-huawei-honor/
Qrtb41 said:
hello, after an attempt to demote my honor 8x emui9 to 8 with FinderFirmware on PC and hisuite I end up with my phone with the notification led flashing green and red. I can not light it anymore and the led flashes all the time. how to do ?
Click to expand...
Click to collapse
Is it being detected in PC ?
To what build did you try to downgrade ?
no it is not detected by the pc. I wanted to iron it in emui 8 has the last version (JSN-L21C432CUSTC432D1B136 8.2.0.136) knowing that the model is jsn-l21 c432
Same problem ARE-AL00 bricked, only Qualcomm HS-USB QDLoader 9008 (com42).-(
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
I am having a problem with my huawei honor 3c, I think it is bricked.
In brief, my phone won't start up no matter what I do, the display is completely shut off, the pc doesn't recognize the phone and it only flashes a red led for one second as soon as it's connected to the pc (without the battery), then nothing more happens.
I reinstalled the drivers and changed the usb cable but it's still not working.
it all happened when I was flashing a ROM using the sp flashtool, it was working fine but as soon as I disconnected the phone and reconnected it back to the computer, it didn't work anymore.
may someone please help?
same here but I was trying to install kitkat with emiu 2.3 Chinese firmware to my international version
now it's dead
did u find anything, pls
Hi,
I have a lenovo Z90-7 and I tried to flash Android 6 custom ROM , When flashing completed My device turned off then I turn it on and Lenovo logo appeared then it vibrated and the port on PC shown HS-USB 9006 and many partitions , nothing work when I power it on it vibrated only , I need HS-USB 9008 to flash another ROM , how to solve this problem ? I tried many tutorials on web but never work?
phoneix2017 said:
Hi,
I have a lenovo Z90-7 and I tried to flash Android 6 custom ROM , When flashing completed My device turned off then I turn it on and Lenovo logo appeared then it vibrated and the port on PC shown HS-USB 9006 and many partitions , nothing work when I power it on it vibrated only , I need HS-USB 9008 to flash another ROM , how to solve this problem ? I tried many tutorials on web but never work?
Click to expand...
Click to collapse
Download your stock rom and tool studio emmc tool from below link and flash your android.
http://www.aryk.tech/2016/12/toolst...-helps-you.html?showComment=1498419619573&m=1
Hello, I will describe my problem as follows
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switches off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start blinking and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
*Let's all be nice. If you won't write for me, show me the right places, and i'll thank you. And please thank me too if I've helped you.
realblackyz said:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode .
Read post for more :
https://www.pantomath.xyz/how-to-re...soft-bricked-coolpad-cool-1-c103-c106-device/
Good Luck
Teddy Lo said:
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode.
Read post for more :
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good Luck
Click to expand...
Click to collapse
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
realblackyz said:
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
Click to expand...
Click to collapse
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
https://www.youtube.com/watch?v=ibu6roR1j2I
Good luck
Teddy Lo said:
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good luck
Click to expand...
Click to collapse
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
realblackyz said:
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
Click to expand...
Click to collapse
Did it work with the EDL cable?
ulloa666 said:
Did it work with the EDL cable?
Click to expand...
Click to collapse
nope it's not working now i have a bricked phone + wasted 10$
i think i should really consider opening the phone for the test point method
Red lights blinking when plugged in, shows up as "Qualcomm HS-USB Diagnostics 900E"
Hi,
my Redmi Note 3 (Snapdragon) suddenly stopped working and won't turn on again.
It is from Gearbest and had probably a shop rom installed. I didn't flash any ROM or didn't root it but i checked the "OEM unlock" option in developer options. After that it was bricked (?).
Fastboot doesn't work, it won't turn on (nothing on the screen) and it is recognized in Windows as "Qualcomm HS-USB Diagnostics 900E" when plugged to the pc. Also the LED blinks constantly in red.
Is this already EDL mode?
I tried to use Mi Flash and it didn't recognize the phone. After manually installing "Qualcomm HS-USB QDLoader 9008" in the device manager Mi flash detects it.
When i try to flash a fastboot rom i get the error "sahara read end error with status: 9".
Also tried to open it and short circuit the testpoint pins. In this moment the device is regognized again but nothing changes and it's exactly like described before.
Is the phone dead or can i try anything else?
Thanks
I can't say fire sure but it seems like a hardware problem and that most likely means that it's dead.
You also posted this in the wrong section. This should be in Q&A/Help section. Not in development.
Try charging it for a while. This also happens when the battery reaches an ultra low power state.
If doesn't work, Boot into edl using test point method and flash fastboot rom.
Try this, it worked for me.
First this one
xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
If it doesn't work then try this one.
en.miui.com/thread-245347-1-1.html