Related
Guys,
Quick question.
Is there a setting somewhere that allows the gear fit to NOT end the workout if stationary (or bad GPS) after a preset time?
Scenario:
Whenever I am cycling, I inevitably come across traffic lights and have to stop, after some time (normally once I get going again) the gear fit will display a message "No movement detected, workout stopped" or something along those lines.
If I acknowledge the message, then its ok, workout continues until the next stop, but if I don't notice it, and sometimes I don't feel the vibration when cycling, then eventually the workout will stop all together, and I only find out next time I check the device.
This is very frustrating, surely I don't have to keep checking the device to see if it thinks the workout is stopped, very dangerous when cycling.
So currently yes I have to periodically check to make sure it is still recording, if I just leave it, guaranteed it will stop recording without me telling it to.
Anyone else experience this when cycling?
Otherwise great device!
further to this..
yesterday on my ride home I got the "workout stopped" message when I had been moving for at least 3-4 minutes.
so not sure how it is calculating movement or what the threshold is.
luckily i noticed and acknowledged the message and the workout continued.
still very annoying.
surely someone else has experienced this, or am I the only one using the gear fit for cycling?
If i initiate the cycling workout from the app on the S5, it does not record heart rate, even though the device is paired.
Yes, I have found this as well, and annoyed me too. You could go for a 4 hr ride, and it's stopped after 20 minutes haha.
THAT would be annoying!
This is problem for the newest firmware i think, bcoz early i don't have this problem...
scoobydoo_nz said:
Yes, I have found this as well, and annoyed me too. You could go for a 4 hr ride, and it's stopped after 20 minutes haha.
THAT would be annoying!
Click to expand...
Click to collapse
Yeap absolutely rubbish!
I am yet to accurately record a workout and I have had the thing for nearly a week.
Tempted to take it back just doesn't do anything it is supposed to do, except send notifications that seems to be the only thing working properly.
I have same problem too. Samsung need to fix this soon with firmware update. Otherwise it will be a great product.
I suffer from the same problem. Anoying..... And if you track from the S Health app have you notice that the distance is way off from what the bike computer measures??? 4 riders, 4 bike computers from Sigma, all measured the same, S Health reported 2,5km LESS.......
I was really fed up with Gear Fit and I've just return it to the seller.
I think i'm going to wait for better devices (or an important upgrade)
I bought it because notifications and tracking options, but it was disconnecting all the time from the cellphone.
Bye bye gearfit!
The movement detector really sucks in this watch. The other day the pedometer prompt came on congratulating me on reaching my daily steps goal. The problem is that it was early morning and I did not go anywhere to reach the 10,000 step goal. Then it occured to me, it must of picked up the movement of me rubbing one out...
Hi,
While I think my Gear Fit is a very useful device it constantly lets me down on the training side. Maybe I'm doing something wrong?
I bike quite a bit and I like the way the Health app stores my map speed etc. the way it does. Once in a blue moon. The problem is that 9 times out of 10 the cycling app will shut down all on its own while I'm still in the middle of my training session. Hysterically irritating to have all these half-recorded sessions in my phone. And there's no way I can check on progress while cycling. To get to the Health app and then on to cycling on the Gear Fit would be sure death when speeding along at 35 kph. At least for someone as unbalanced as myself.
So am I doing something wrong? Is there a setting for the Gear Fit that I've missed? Is anyone else having this problem, or am I just stuck with a buggy example of the otherwise very nifty piece of engineering? Oh, and whoever designed the strap for the Fit must absolutely have had repeat business in mind! It's fallen off, like, 100 times of its own accord. A miracle that it's still in my possession.
Grateful for any advice on the "keep alive" topic.
Thanks/M
McHan said:
Hi,
While I think my Gear Fit is a very useful device it constantly lets me down on the training side. Maybe I'm doing something wrong?
I bike quite a bit and I like the way the Health app stores my map speed etc. the way it does. Once in a blue moon. The problem is that 9 times out of 10 the cycling app will shut down all on its own while I'm still in the middle of my training session. Hysterically irritating to have all these half-recorded sessions in my phone. And there's no way I can check on progress while cycling. To get to the Health app and then on to cycling on the Gear Fit would be sure death when speeding along at 35 kph. At least for someone as unbalanced as myself.
So am I doing something wrong? Is there a setting for the Gear Fit that I've missed? Is anyone else having this problem, or am I just stuck with a buggy example of the otherwise very nifty piece of engineering? Oh, and whoever designed the strap for the Fit must absolutely have had repeat business in mind! It's fallen off, like, 100 times of its own accord. A miracle that it's still in my possession.
Grateful for any advice on the "keep alive" topic.
Thanks/M
Click to expand...
Click to collapse
Same here, but I have missed all my bicyclings. But I have solved issue. Taking pulse (beat of heart) off then the training have gone OK. I am a male and have hairs on my wrist. I haven't tryed if I would keep Gear Fit like womens do, wrong way around. I mean the display is under wrist and where are not any hairs or you have to keep your strap tighter than now.
Newest version bring pause function to Gear Fit training, but I agree that better would be if I can myself start and stop the bicycling training. It could stop automatically if you stand too long in traffic signal; GPS signal stays too long same. If this is true, then the clock is dangerous incitementing to run a red lights.
The pulse off settings is here: biking/ scroll right one screen (on landscape mode)/ pulse: take off tag of pulse.
EmDzei said:
Same here, but I have missed all my bicyclings. But I have solved issue. Taking pulse (beat of heart) off then the training have gone OK. I am a male and have hairs on my wrist. I haven't tryed if I would keep Gear Fit like womens do, wrong way around. I mean the display is under wrist and where are not any hairs or you have to keep your strap tighter than now.
Newest version bring pause function to Gear Fit training, but I agree that better would be if I can myself start and stop the bicycling training. It could stop automatically if you stand too long in traffic signal; GPS signal stays too long same. If this is true, then the clock is dangerous incitementing to run a red lights.
The pulse off settings is here: biking/ scroll right one screen (on landscape mode)/ pulse: take off tag of pulse.
Click to expand...
Click to collapse
Hi EmDzei and thanks for the reply.
Unfortunately this did not solve the problem for me. Turned off the heart-sensor and have now tried two biking sessions but the Gear device stops recording after 10 and 25 minutes respectively. Pretty much the same results as before. A real pain in the nether regions! Does no one else have this problem? I've noticed that the phone "pings" every now and again and I'm wondering if it momentarily loses BT contact with the watch and that this somehow stops the Health recording. It does this at night also when I have the blocking mode enabled (which irritates the H-ll out of my wife, the soft pinging, that is). Any thoughts on this...?
Thanks/M
McHan said:
Hi EmDzei and thanks for the reply.
Unfortunately this did not solve the problem for me. Turned off the heart-sensor and have now tried two biking sessions but the Gear device stops recording after 10 and 25 minutes respectively. Pretty much the same results as before. A real pain in the nether regions! Does no one else have this problem? I've noticed that the phone "pings" every now and again and I'm wondering if it momentarily loses BT contact with the watch and that this somehow stops the Health recording. It does this at night also when I have the blocking mode enabled (which irritates the H-ll out of my wife, the soft pinging, that is). Any thoughts on this...?
Thanks/M
Click to expand...
Click to collapse
Have to notice here at start that I am not so specialist for this case. But I can give one or two hint.
This hint could hit forest with full speed. I don't know if the bluetooth and WLAN are on same chip. But on WLAN (= Wi-Fi) extra settings and its sleep mode there are three settings: always, only when connected and never (increase mobile data). Simple translations from finnish. =) I use this middle settings: allways, when device is connected. I wrote this hint because you wrote that your device seems disconnect 10 - 25 minutes. WLAN disconnecting time is similar: 15 minutes, if on sleep mode. As I said, this could be very very wrong information.
OK. Next our possible version differents. My Gear Fit firmware is R350XXU0BNE5. My Gear Fit Manager version is 1.67.0523 and I use it on my Samsung Galaxy S4 (GT-I9505) stock un-rooted firmware version UFNB9. Last five serial character of Gear Fit are LRXW. I do not use blocking mode on Gear Fit. I use it on my phone and disable sync at nights.
Today I tested and bicycled 26,52 km. I visited two times on markets and paused my "training". All session took 1:44 hour (so beautifull day and sunshine). Does your bicycling have Pause button when you started the trip? My previous version of this doesn't and with it I had problems with cutted bicycle trainings. My phone lay on own bicycle mounting holder, so the bluetooth signal is very stong and distance ~50 - 60 cm only.
Uh, last comments. You have of course made a Samsung account and it sync works OK? I think also that keeping LTE off when biking outside of the city fairway, if it is not strong signal. Good to try in this desperation, eh.
EmDzei said:
Have to notice here at start that I am not so specialist for this case. But I can give one or two hint.
This hint could hit forest with full speed. I don't know if the bluetooth and WLAN are on same chip. But on WLAN (= Wi-Fi) extra settings and its sleep mode there are three settings: always, only when connected and never (increase mobile data). Simple translations from finnish. =) I use this middle settings: allways, when device is connected. I wrote this hint because you wrote that your device seems disconnect 10 - 25 minutes. WLAN disconnecting time is similar: 15 minutes, if on sleep mode. As I said, this could be very very wrong information.
OK. Next our possible version differents. My Gear Fit firmware is R350XXU0BNE5. My Gear Fit Manager version is 1.67.0523 and I use it on my Samsung Galaxy S4 (GT-I9505) stock un-rooted firmware version UFNB9. Last five serial character of Gear Fit are LRXW. I do not use blocking mode on Gear Fit. I use it on my phone and disable sync at nights.
Today I tested and bicycled 26,52 km. I visited two times on markets and paused my "training". All session took 1:44 hour (so beautifull day and sunshine). Does your bicycling have Pause button when you started the trip? My previous version of this doesn't and with it I had problems with cutted bicycle trainings. My phone lay on own bicycle mounting holder, so the bluetooth signal is very stong and distance ~50 - 60 cm only.
Uh, last comments. You have of course made a Samsung account and it sync works OK? I think also that keeping LTE off when biking outside of the city fairway, if it is not strong signal. Good to try in this desperation, eh.
Click to expand...
Click to collapse
A-HA! I think You hit on the solution to the problem in Your very last comment. I've been trying various combinations of settings on both the Gear Fit and on the phone, but to no avail. Then finally it struck me that, yes! I have been experiencing issues when shifting between LTE and other modes, and that possibly possibly this could have something to do with my problems. And so, sure enough, when I blocked off 4G and went for my daily today I finally got the whole ride recorded in the phone!
So many thanks for putting me on this track and fining the solution for me, EmDzei!
Last night I tried to use the Gear Fit for the very reason I bought it... to track my heart rate and calories burned during exercise. This is where I found my first real frustration with the device. I don't run or cycle. I do walk and hike on occasion but not really for exercise, just for fun.
When I exercise I do cardio in my house. I have tried and tried to see if there is a way to track this on the fit, either with just choosing another exercise or by adding a custom exercise. Problem is, if you choose one of the preset choices, it will not track what you are doing (even through it tracks heart rate). It will tell you that you have gone 0 distance and burned 0 calories. I just happened to be wearing my Polar also, so at least I got my readings from that, but I would love to move to using the fit only.
Has anyone found a way to track cardio? If not, this has to be a major oversight on samsung's part. I can't be the only person that wants to track exercise this way.
I'm afraid the GF was designed to be paired to a phone. It acts as a remote for data and control.
I've been using sports trackers for a few years. Try Endomondo, it works seamlessly with your gear fit.
https://play.google.com/store/apps/details?id=com.endomondo.android
endomondo.com
It also supports bluetooth (polar) and Ant+ Heart Rate Monitors.
You can set the Gear fit to record your steps (pedometer) or walking/HR (Exercise>Walking) which it will record but you have a limited history detail and capacity. This needs to sync with Samsung S Health. I have removed S Health from my samsung phone as it is the worst piece of software I have come across.
Good luck
Thanks for the reply. I guess I forgot to mention that I have it paired with a Note 3. I'm just asking about tracking cardio only (HR & calories burned) without trying to choose another exercise and trying to make it work (it doesn't)
Hi
I had this same problem, if you go into the s health app on your mobile, go into more on the top right of your screen, then choose manage items from the list it will show all the trackers that you use, switch on the sports one & this will track your aerobic excercise, although it works through the wrist band you have to activate it from your mobile each time. Hopefully Samsung will get it added to the gear fit if we complain enough lol. Hope that was helpful.
@janet22 how do you get the gear fit to track sport once you've started the activity on the phone in s health?
u can either chose a different sport or sync it with s health
Hi,
I understand the step counter on the Gear S is tied to arm movement, and does not work well on a treadmill if you are holding on to the rails.
I have just set up a treadmill desk in my home office and am trying to figure out if there is another way to "wear" the Gear S to make it work. The first day I tried, I attached it to my lower leg, it counted the steps, but the next day it did not.
Has anybody experimented using either Gear S or Samsung phone (I have the Note 3) on a treadmill while not swinging arms and walking at a slow pace? I have tried to add the steps taken manually, but that does not appear to work. I also figured if the phone shows more steps, it would overrule the Gear S count, but I don't think S Health works hat way.
Any suggestions?
What would happen if you try using the Nike+ running app on the Gear S while you're walking on the treadmill? I just finished a treadmill run today and it was my first time using the Nike+ app on my Gear S. The app knows that I'm indoors and it estimates my running pace and mileage based on how I swing my arms.
I have the exact same setup. A desk on my Treadmill. Like you, I only walk at 1.6 MPH because I can actually talk on the phone and use my laptop while walking. I do a couple hours a day.
I have had NO problem having the Gear S in my pocket and having it record steps. It works quite well in fact. I even attach the recharger (unplugged) to the back while it is in my pocket. That way I end up measuring steps AND having a fully charged watch.
Sorry I can't help you but to tell you mine is working this way fine.
I tried tying it to my ankle...first day, it worked great. Second day, it must not have been tied tight enough and it registered 24000 steps in 2 1/2 hours. While it looked great on my statistics, needless to say, it was absolutely incorrect. Because it had been tied too loosely, it bounced too much, recording each step multiple times.
I typically wear yoga pants, so no pocket. Will try wearing something with a pocket today to see if that helps...
Thanks for the tip
The swinging arms issue is the problem... While I am at my treadmill desk, I type on my computer. Not much swinging going on unless I am on the phone and upset about something
Will try the pocket option below.....
I'm sorry rant ahead. But I've had enough.
I bought the Stratos, because I didn't really like my Mi Band 3 (constant connection problems and almost invisible screen in daylight). I wanted to buy the Bip, but I said, what the hell. Let's go big. Stratos also looks good (Bip does not). The transreflective always on display is also great. But here the good things end.
1. The watch is slooow. Sometimes it doesn't register a touch, and sometimes it registers a ghost touch. The menus are bad, the layout is bad, the navigation is bad (and slow). The watch is also way too thick.
2. The Amazfit app is abysmal. Once the acitivity is recorded, it cannot be edited in any way. Did you press "walking" when you started running by mistake (It can easily happen - see above)? Too bad. You cannot correct it. Amazfit can draw pretty GPS pictures and graphs, but that's about it. And it's so buggy, it's more or less unusable (see below). There is no internet page, like literally every other app has (Strava, Endomondo, Runkeeper), where you could edit the data. There is no homepage. There are no official help forums.
So, even if the watch and app were completely bug free, the whole package would still be, in best case, average. But they are not bug free. And that is an understatement of the century. I've seen buggy apps and gadgets before, but this one takes the cake.
3. When I got the watch, the battery life was a real rollercoaster. The watch could go form 100% to 0 in a few hours or in 5 days. Sometimes reboot or factory reset helped. And that is true for the watch as a whole. Three to four factory resets in a months is (was - it doesn't work anymore -see below) almost necessary for Stratos to work "normally".
4. Caller name on the watch started working with Amazfit app 3. It never worked before. So, this basic (and advertised) functionality started working almost a year after the watch was released.
5. So, you start to run/bicycle/whatever. You choose the appropriate workout, you wait for the GPS, you start, and.... nothing. You are riding a bicycle and the watch says your speed iz zero.
6. You are running, and suddenly you pace starts to drop like a stone. So, I run little below 5.00 min/km. Yesterday I was running, and suddenly I was at 11.00 min/km. Not in reality, just on the Stratos. I always run 6 km, but Stratos measured 4 km. A day before 5 km. I actually ran 6 km, as I know the way. Thank god for Strava, because when I got home and the Strava synced, the running length(and pace) was correct. But only in Strava. Amazfit app and the watch itself got the data wrong. No, I don't know, how that is possible.
7. So, I was bicycling downhill. Suddenly, my hearbeat goes to 160. 170. 180. Am I dying? I feel the chest. Everything is normal. The watch is just acting up again. A few days after that, I was bicycling uphill, usually my heartrate is somewhere around 130-140. Suddenly, for no apparent reason, my heartrate drops. 60. 50. 40. And I am paddling uphill in 35 degrees C! Am I Lance Armstrong? No, It's just the watch.
8. A few days ago heartrate and steps stopped syncing with the app. The watch is at 6000 steps and Continuous HR is on (and seems to work on the watch), but the app is at 0 steps and "no heart rate data. Syncing doesn't help. Rebooting the watch doesn't help. Factory reset doesn't help. Restarting the phone, reinstalling the watch, creating a new account doesn't help.
Let's end this. I paid 160 EUR for this POS. After many months on the market, even the basic functionality of the watch does not work. What does work now, might not work tomorrow, and what works, works badly.
Why are things like this? It's the age old truth: when you buy the product, you don't just buy plastic, steel and glass, you buy a service. You buy programmers, that will get your product running long after you bought it. And that's why Amazfit products just seem cheap. Because you just bought the plastic. Nothing else.
You got a broken watch, claim warranty.
I would also add there might be a problem with your smartphone bluetooth as well. I used Mi Band 1, 2, 3 and now 4. I also had 2 smartwatches and now Stratos. I also changed 2 smartphones and I never ever had connection problems with Mi Band on any version of it. Mi Band for me is by far the most stable bluetooth connection I've ever used on any bluetooth device and I have over dozen various bluetooth devices. Stable connection, along with battery life is why I'm still loyal to Mi Band. I had various situations where I couldn't connect to plain bluetooth speaker, or sometimes even Stratos disconnects and in each case Mi Band connection is the only one that would still be stable. But that is just my personal experience as it's impossible to account for all the different hardware out there.
Agree with you. I have an Verge, which is, till the moment, a money waste.
Software is the problem, let's see if Xiaomi do something.
hpto said:
Agree with you. I have an Verge, which is, till the moment, a money waste.
Software is the problem, let's see if Xiaomi do something.
Click to expand...
Click to collapse
You will wait forever, Xiaomi has nothing to do with Pace, Verge or Stratos...
lfom said:
You will wait forever, Xiaomi has nothing to do with Pace, Verge or Stratos...
Click to expand...
Click to collapse
Amazfit don't are an trademark from Xiaomi?
Btw, a money waste. Mi band do the job and far better.
hpto said:
Amazfit don't are an trademark from Xiaomi?
Btw, a money waste. Mi band do the job and far better.
Click to expand...
Click to collapse
No, it's Huami's.
Thank you all for replies!
I don't think the watch is broken (in a sense, that warranty should be claimed) and I'll tell you why.
I may have been a little misunderstood in my first post (English is not my first language). The watch doesn't act up all the time. But frequently enough, that it cannot be relied upon. I don't need a watch that works 70 % of the time (which this one does). So, let me add a few things to my points in my previous post:
5. That happened twice (see number 5 in my first post). Rebooting the watch helped. And let me stress again, that it would happen a lot more often, if I didn't reboot or factory reset the watch every time it starts to act up (3-4 times per month).
6. If that was a hardware error (se number 6 in my first post), GPS data would be wrong (this happened only during my last two runs!). But the GPS data that the watch recorded during the run was correct. If it wasn't, Strava would be wrong, too. Activity (run) was measured (interpreted?) incorrectly by the watch and Amazfit app. Strava got the same (raw?) data and it gave correct results (kilometers, pace). If the watch was faulty, the GPS data would be faulty, too. But the hardware, it seems, is fine. Just the software is bad.
7. HR monitoring is just bad on this watch. I don't think I'm the only one that noticed that.
8. Steps and HR data syncing with the app currently works. It started to work the next day. But I noticed something strange. When syncing wasn't working, the Amazfit app said for steps and HR "08/17 19:52" (something like that, I don't remember the exact time). But it was only 11 o'clock! So, the app was claiming, that the last sync with the watch was in the future. Probably that's why it wasn't syncing. And that is not a harware error, it's the software.
So, I don't think the watch is faulty, it's just the software that's bad. That was my point all along. Right now, the watch is working fine. It was working fine yesterday and the day before that, when I was bicycling. But that is not enough. I want a watch that works all the time.
Amazfit stratos 3.0: poor watch
The watch is unreliable, sunset and sunrize notifications come and go without reason. Very disappointing.
You could use my app for sunrise and sunset times.
https://forum.xda-developers.com/smartwatch/amazfit/app-amazfit-sun-widget-t4023903