Hi,i have flashed pie beta update .121. Want back to oreo, but cannot install via dload and erecovery. Any recovery for emui 9. Which images must flash via fastboot?
Is your bootloader unlocked?
Yes, bootloader is unlocked. When is lock no difference
Cisuwek said:
Yes, bootloader is unlocked. When is lock no difference
Click to expand...
Click to collapse
Since the bootloader is unlocked you can use this: https://forum.xda-developers.com/huawei-p20/how-to/guide-how-to-rollback-emui-9-beta-to-t3841687
It works for me
Replace the TWRP image on the images folder with this one: https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
After flashing twrp and restarting, vol+ doesn't work, boot normal way.
Cisuwek said:
After flashing twrp and restarting, vol+ doesn't work, boot normal way.
Click to expand...
Click to collapse
Flash p20 lite twrp, of success, restart phone, when there are 3 options, press power biton to boot, press vol up 3 sec to enter erecovery etc, and do nothing for 5 secons aitomatocaly boot in System you need to press vol up 3 seconds, then, when you are in e recovery, use option emergency backup, or somthing like that, then phone will reboot to emergency System mode, press option factory reset or somthing like that, second option from top if im coretly remeber, after that you will be in twrp recovery.
So,. If want to use downy, replace downy twrp with p20 lite one, do all what downy said, but, where you need to boot in twrp, do as writed i, and continue with downy after you are in twrp. Good luck
OK, do it in same way, it works. Earlier flashed this twrp, but after few seconds phone restart to system. Working and don't know why
Did you manage to downgrade?
Yes, thanks a lot.
Related
Are there other ways to flash a recovery with a locked bootloader?
My Problems:
I can't flash my stock recovery through fastboot with a locked bootloader.
I can't boot into my recovery because my current recovery is TWRP 2.5.0.1 and I have a locked bootloader.
I can't unlock my bootloader because I have used an IMEI Hack Tool and set my IMEI to 0 (I guess).
I can't boot into my ROM because I used an IMEI Hack Tool.
I can't Force Upgrade too (Vol Up + Down + Power). It only shows a pink/purple screen.
Solutions:
I can only flash a recovery with an unlocked bootloader.
I can only boot into a recovery with an unlocked bootloader (except for stock).
I can only unlock bootloader if my IMEI has restored.
I can only restore my IMEI if I can boot into my ROM.
I can only boot into my ROM if I have a stock recovery.
I can only Force Upgrade if I have restored my IMEI.
If I could only restore my IMEI through fastboot, that would be great!
So, please help!
You cant restore stock recovery ?
You cant enter to trwp ?
You cant restore IMEI cuz rom bootloop ?
You cant force flash stock firmware cuz fastboot is pink ?
I also "zero" my imei many times to flash stock firmware, but i allways can enter trwp and restore buckup or flash rom in zip
OmenHTX said:
You cant restore stock recovery ?
You cant enter to trwp ?
You cant restore IMEI cuz rom bootloop ?
You cant force flash stock firmware cuz fastboot is pink ?
I also "zero" my imei many times to flash stock firmware, but i allways can enter trwp and restore buckup or flash rom in zip
Click to expand...
Click to collapse
I can force upgrade now since i formatted my sd card. But the force upgrade fails at step 2/2.
.vonpatrick. said:
I can force upgrade now since i formatted my sd card. But the force upgrade fails at step 2/2.
Click to expand...
Click to collapse
If upgrade fail as step 2/2 your IMEI its not "zero" cuz IMEI block upgrading firmware from branded to nonbranded
OmenHTX said:
If upgrade fail as step 2/2 your IMEI its not "zero" cuz IMEI block upgrading firmware from branded to nonbranded
Click to expand...
Click to collapse
If my imei is not zero, then why can't i boot my phone?
And why can't i unlock my bootloader with my unlock code?
.vonpatrick. said:
If my imei is not zero, then why can't i boot my phone?
And why can't i unlock my bootloader with my unlock code?
Click to expand...
Click to collapse
OK, lest start from beggining
1.You must unlock bootloader by code ( first run check Lock / Unlock status ) (fastboot mod)
2. Flash TRWP (fastboot mod)
3. Flash SuperSU or Superuser zip (trwp)
4. Backup IMEI on running rom
5. Hack IMEI on running rom
6. Update phone by forceupdate flash update.app (rom in root of sd card > folder dload > update.app)
7. Run stock rom , lest install, shut down phone
8. Run TRWP to install SuperSU/Superuser zip
8. Restore IMEI (on working rom)
9. Go to TRWP and Wipe dalvik cache
10. Now you have working newest stock rom with root
So :
1. You cant have trwp in lockedbootloader
2. If update fail on 2/2 IMEI is not "zero"
3. Pink LCD on "update mod" = no rom in sd card
Next :
Hold Vol Down + Vol Up + Power to forceupdate firmware mod
Hold Vol Up + Power to run TRWP or stock recovery ( hold about 5s)
Hold Vol Down + Power for fastboot mod (5s-10s)
If you now have locked bootloader , with stock recovery, and force update fail, you cant unlock bootloader and flash trwp > Last hope is in "oryginal" rom, your IMEI will not block it.
OmenHTX said:
OK, lest start from beggining
1.You must unlock bootloader by code ( first run check Lock / Unlock status ) (fastboot mod)
2. Flash TRWP (fastboot mod)
3. Flash SuperSU or Superuser zip (trwp)
4. Backup IMEI on running rom
5. Hack IMEI on running rom
6. Update phone by forceupdate flash update.app (rom in root of sd card > folder dload > update.app)
7. Run stock rom , lest install, shut down phone
8. Run TRWP to install SuperSU/Superuser zip
8. Restore IMEI (on working rom)
9. Go to TRWP and Wipe dalvik cache
10. Now you have working newest stock rom with root
So :
1. You cant have trwp in lockedbootloader
2. If update fail on 2/2 IMEI is not "zero"
3. Pink LCD on "update mod" = no rom in sd card
Next :
Hold Vol Down + Vol Up + Power to forceupdate firmware mod
Hold Vol Up + Power to run TRWP or stock recovery ( hold about 5s)
Hold Vol Down + Power for fastboot mod (5s-10s)
If you now have locked bootloader , with stock recovery, and force update fail, you cant unlock bootloader and flash trwp > Last hope is in "oryginal" rom, your IMEI will not block it.
Click to expand...
Click to collapse
Wait, let me put this in summary:
1.
- I have a locked bootloader.
- I can't unlock the bootloader because it says "recovery image verify failed".
- It can only mean one thing: my IMEI must have changed.
2.
- I have a TWRP recovery.
- At first, my original recovery was the stock when I have a locked bootloader.
- Then I flashed the TWRP recovery even if I have a locked bootloader and didn't warned me. (Shoudn't it be accepted to be flashed since I have a locked bootloader).
- In my experience, if I have a stock recovery when I'll hack my IMEI, it will format my cache and data and let me boot into my phone.
- If I have a TWRP recovery when I'll hack my IMEI, it will only redirect me to the TWRP menu.
3.
- I can access Force Upgrade.
- But it doesn't show any text. (For example: it doesn't show if it is unpacking or installing, only a bar.)
- When I access Force Upgrade, the loading stops at 1/4 of the bar. (So I'm not really sure if it failed at step 2/2.)
So my questions are:
1. Why can't I unlock my bootloader with my original IMEI's unlock code if my IMEI is not "zero"?
2. Why is it when I Force Upgrade, it doesn't show any text?
3. Why did fastboot accepted the TWRP recovery being flashed when my bootloader was locked?
And, what do you mean by "original"? Do you mean the B182 firmware upgrade, not the B175?
After hacking IMEI you cant have stock recovery, cuz you need root for shell script. So its not making "auto wipe" to change OEM info.
TRWP should not be installed on lockbootloader, but i dont make it ...
So , do you have working trwp or not ?
Oryginal firmware ... version when you get with phone, like my Y300-0100 branded T-Mobile PL B167
OmenHTX said:
After hacking IMEI you cant have stock recovery, cuz you need root for shell script. So its not making "auto wipe" to change OEM info.
TRWP should not be installed on lockbootloader, but i dont make it ...
So , do you have working trwp or not ?
Oryginal firmware ... version when you get with phone, like my Y300-0100 branded T-Mobile PL B167
Click to expand...
Click to collapse
I am sure i have twrp.
If i have a stock recovery, i would be able to boot into recovery.
Based in my experience:
1. To hack the imei, you must first root your phone.
2.a. Next, the phone will reboot, but it won't boot into system.
2.b. Fastboot, force upgrade, and recovery is still accessible.
3.a. If you have a twrp recovery when you hacked the imei and rebooted, it will redirect you to the twrp menu.
3.b. If you tried to restore from twrp recovery, it still won't reboot into system.
3.c. If you have a stock recovery, it will directly boot into stock recovery and format your cache and data and reboot to system (still leaves your imei to zero)
4. If you go to force upgrade, you can flash any official roms (leaves your imei to zero)
5. After you have flashed a rom or was redirected to stock recovery, your phone will reboot.
6.a. Then root your phone and restore imei then your phone will reboot.
6.b. If you have a stock recovery, it will wipe your cache and data.
6.c. If you have a twrp recovery, it will redirect you to the twrp menu (you can manually reboot into system)
Am i right?
And where can i get the original rom for my b182? There's no local huawei store here.
.vonpatrick. said:
I am sure i have twrp.
If i have a stock recovery, i would be able to boot into recovery.
Click to expand...
Click to collapse
So why you dont run TRWP and flash any rom in zip ?
OmenHTX said:
So why you dont run TRWP and flash any rom in zip ?
Click to expand...
Click to collapse
Twrp is not accessible if you have a locked bootloader.
bricked
I have a big problem. My Ascend y300 started to work strange yesterday, my PC didnt see the internal sd nor the external SD correctly. Today I restarted it and now I get blue screen when I start it. I had TWRP installed, but when I try to access it, it gives blue screen aswell. Any solutions?
gery0518 said:
I have a big problem. My Ascend y300 started to work strange yesterday, my PC didnt see the internal sd nor the external SD correctly. Today I restarted it and now I get blue screen when I start it. I had TWRP installed, but when I try to access it, it gives blue screen aswell. Any solutions?
Click to expand...
Click to collapse
Try this through fastboot:
fastboot erase recovery
fastboot flash recovery <path to recovery.img>
.vonpatrick. said:
Try this through fastboot:
fastboot erase recovery
fastboot flash recovery <path to recovery.img>
Click to expand...
Click to collapse
My problem is a little bit more complex unfortunately. I tried what you said. When I push the buttons to enter fastboot, my phone dont freez at splashscreen and I get bluescreen. When I connect it to my PC my PC recognizes it though, BUT ADB cant see it. I reinstalled the drivers any times, without success.
gery0518 said:
My problem is a little bit more complex unfortunately. I tried what you said. When I push the buttons to enter fastboot, my phone dont freez at splashscreen and I get bluescreen. When I connect it to my PC my PC recognizes it though, BUT ADB cant see it. I reinstalled the drivers any times, without success.
Click to expand...
Click to collapse
What did you do anyway why it got the blue screen?
.vonpatrick. said:
What did you do anyway why it got the blue screen?
Click to expand...
Click to collapse
That is the most strange part of the story. I totally did nothing. I opened bootloader, installed twrp, rooted it, installed init.d support, installed a ramscript. The phone worked totally fine until yesterday. I did a restart yesterday and bumm, bluescreen. And I did nothing before this happened. Srsly, no problems detected, it came from nothing...
gery0518 said:
That is the most strange part of the story. I totally did nothing. I opened bootloader, installed twrp, rooted it, installed init.d support, installed a ramscript. The phone worked totally fine until yesterday. I did a restart yesterday and bumm, bluescreen. And I did nothing before this happened. Srsly, no problems detected, it came from nothing...
Click to expand...
Click to collapse
Can't you really boot into fastboot (Power + up)?
Hold it for like 10 seconds.
If it still shows blue screen, try connecting it to pc, maybe it'll read it.
Then erase recovery and flash twrp.
Wipe everything and restore a backup you made.
.vonpatrick. said:
Can't you really boot into fastboot (Power + up)?
Hold it for like 10 seconds.
If it still shows blue screen, try connecting it to pc, maybe it'll read it.
Then erase recovery and flash twrp.
Wipe everything and restore a backup you made.
Click to expand...
Click to collapse
Well, my problem is, that despite of the blue screen, fastboot seems to work. My pc sees my device, BUT ADB refuses to see it, and I dont know why. I will try it from win xp under virtualbox now.
hi Gery
How do you manage to get the phone into fastboot mode?
my y300 also enters blue screen everytime now. I try to press voldown + power for like 10 seconds, yet the fastboot command is not working.
gery0518 said:
Well, my problem is, that despite of the blue screen, fastboot seems to work. My pc sees my device, BUT ADB refuses to see it, and I dont know why. I will try it from win xp under virtualbox now.
Click to expand...
Click to collapse
Well, that's perfect! If the PC can read the device from fastboot, you can erase the recovery and flash the twrp and restore from backup. But if it still goes blue, flash the system, data, cache, boot, recovery from your twrp backup.
I tried to install a custom firmware on my phone, and now, my phone is locked in "Firmware Update" screen (same as when you press volume + when phone boots). I used LGUP tool to flash stock firmware, but with 6.0.1 shows an error [Error code=0x(2 numbers and 1 letter)]. And with 7.0 LGUP crashes. Any way to fix this?
PD: Cannot go to TWRP recovery
PD2: Only can go to fastboot
Santiagofamo said:
I tried to install a custom firmware on my phone, and now, my phone is locked in "Firmware Update" screen (same as when you press volume + when phone boots). I used LGUP tool to flash stock firmware, but with 6.0.1 shows an error [Error code=0x(2 numbers and 1 letter)]. And with 7.0 LGUP crashes. Any way to fix this?
PD: Cannot go to TWRP recovery
PD2: Only can go to fastboot
Click to expand...
Click to collapse
allright, gonna try and help you.
1st, Is your bootloader unlocked? If so
try to flash twrp 3.0.2.1 in fastboot. Then boot in twrp by holding volume down and power button.
If you get into twrp you probably can flash a rom.
JayFlip said:
allright, gonna try and help you.
1st, Is your bootloader unlocked? If so
try to flash twrp 3.0.2.1 in fastboot. Then boot in twrp by holding volume down and power button.
If you get into twrp you probably can flash a rom.
Click to expand...
Click to collapse
-Yes, bootloader is unlocked, and I can lock and unlock it via fastboot if I want.
-I can't go to TWRP, there is another custom recovery?
JayFlip said:
allright, gonna try and help you.
1st, Is your bootloader unlocked? If so
try to flash twrp 3.0.2.1 in fastboot. Then boot in twrp by holding volume down and power button.
If you get into twrp you probably can flash a rom.
Click to expand...
Click to collapse
-Yes, I still can lock and unlock the bootloader.
-I flashed twrp but everytime I try to go to TWRP, it goes to the same update screen.
Cliche answering sorry. Try different versions of LGUP and different PC's.
Sent from my LGE LG-H830 using XDA Labs
Hi Guys,
I want to root my LG G5 with TWRP & SuperSU
So first i unlocked the bootloader for my phone.
2. Dwonloaded TWRP & SuperSU
3. Installed TWRP with CMD
works everything fine, but i cant enter in the TWRP recovery it just loads the normal recovery where i can swipe my data.
I also tried to "fastboot boot" into TWRP recovery and also install TWRP and remove battery so android cannt boot.
Unfortunately nothing worked
I really dont know what to do ?
thx 4 help
trash195 said:
Hi Guys,
I want to root my LG G5 with TWRP & SuperSU
So first i unlocked the bootloader for my phone.
2. Dwonloaded TWRP & SuperSU
3. Installed TWRP with CMD
works everything fine, but i cant enter in the TWRP recovery it just loads the normal recovery where i can swipe my data.
I also tried to "fastboot boot" into TWRP recovery and also install TWRP and remove battery so android cannt boot.
Unfortunately nothing worked
I really dont know what to do ?
thx 4 help
Click to expand...
Click to collapse
Start your phone in fastboot mode, flash TWRP, disconnect and reconnect the battery.
Now hold volume down + power until you see the LG logo, keep holding volume down and let go of the power button for a moment and then hold the power button again while still holding the volume down button.
You will now see a prompt asking if you'd like to factory reset, press yes to both prompts.
You will now be inside TWRP.
Which variant you are using.
mass/cls/ said:
Start your phone in fastboot mode, flash TWRP, disconnect and reconnect the battery.
Now hold volume down + power until you see the LG logo, keep holding volume down and let go of the power button for a moment and then hold the power button again while still holding the volume down button.
You will now see a prompt asking if you'd like to factory reset, press yes to both prompts.
You will now be inside TWRP.
Click to expand...
Click to collapse
I've tried this process myself and I get the same result. Reply Yes, Yes to factory reset and it *should* then start TWRP but it doesn't. You end up with a wiped phone and have to start all over again. Tried process a few times and never works.
lywyn said:
I've tried this process myself and I get the same result. Reply Yes, Yes to factory reset and it *should* then start TWRP but it doesn't. You end up with a wiped phone and have to start all over again. Tried process a few times and never works.
Click to expand...
Click to collapse
The only reason it wouldn't work is if you did not flash TWRP correctly, make sure flashing TWRP with fastboot was successful before disconnecting the battery and entering the factory reset prompt.
mass/cls/ said:
The only reason it wouldn't work is if you did not flash TWRP correctly, make sure flashing TWRP with fastboot was successful before disconnecting the battery and entering the factory reset prompt.
Click to expand...
Click to collapse
It is successful, and I pull the battery and go straight into recovery as recommended. Used latest version.
lywyn said:
It is successful, and I pull the battery and go straight into recovery as recommended. Used latest version.
Click to expand...
Click to collapse
This is not something I've ever had a problem with, every time I've wiped my phone and installed a new version this has worked.
Flash the latest version of android with LGUP and try again.
mass/cls/ said:
This is not something I've ever had a problem with, every time I've wiped my phone and installed a new version this has worked.
Flash the latest version of android with LGUP and try again.
Click to expand...
Click to collapse
On V20a-234-30. I have flashed TWRP successfully in the past. Might try LGUP to V20D and then try, but if it factory resets I waste hours while phone goes through setup to try again
lywyn said:
On V20a-234-30. I have flashed TWRP successfully in the past. Might try LGUP to V20D and then try, but if it factory resets I waste hours while phone goes through setup to try again
Click to expand...
Click to collapse
Yes I know it is very annoying when that happens, you should definitely flash the latest version regardless, I'm sure you won't have the problem after flashing :good:.
trash195 said:
Hi Guys,
I want to root my LG G5 with TWRP & SuperSU
So first i unlocked the bootloader for my phone.
2. Dwonloaded TWRP & SuperSU
3. Installed TWRP with CMD
works everything fine, but i cant enter in the TWRP recovery it just loads the normal recovery where i can swipe my data.
I also tried to "fastboot boot" into TWRP recovery and also install TWRP and remove battery so android cannt boot.
Unfortunately nothing worked
I really dont know what to do ?
thx 4 help
Click to expand...
Click to collapse
Found it! After you install twrp, you just execute 2 more commands:
fastboot format userdata
fastboot format cache
Don't reboot, just turn it off.
Works like a charm!
Hi All,
I have an Redmi 3 pro with unlocked BL and the latest "official" weekly 7.3.9 from xiaomi.eu and latest TWRP 3.0.2.0 from official twrp site.
I am unable to flash twrp.
I flash it with fastboot flash recovery recovery.img then boot into it using fastboot boot recovery.img with no issue at all.
Then,
if i reboot into recovery from twrp itself it still works.
if i let it boot the phone in its bootloader (POW+VOL_UP the one where you can choose "download" "fasboot" or "recovery") and i select recovery, it does not boot. The phone boots instead.
if i choose from the updater to reboot in recovery, same.
if i choose from flashify (which shows me "stock recovery" is installed), same.
if i use adb reboot recovery same.
i can only boot it using command fastboot boot recovery.img.
It just looks like the twrp flash says OKAY but it's not being flashed.
I've also tried cofface recovery with no success.
i've also tried official twrp app with no success.
everytime flash goes fine and successfully, but i'm unable to boot the phone in recovery itself.
i must always use fastboot boot recovery.img
Hints?
Hi @lalontra,
Use combination of Power+Vol(+)+Vol(-) button. It should boots you to recovery.
Regards.
Sent from my Redmi 3 using XDA Labs
It is error in this release ROM
You are not alone, its problem of this concrete ROM from 9.3.2017 ido.! You must flash different ROM, previous release.
krasCGQ said:
Hi @lalontra,
Use combination of Power+Vol(+)+Vol(-) button. It should boots you to recovery.
Regards.
Click to expand...
Click to collapse
Hi,
Did not work.
I have now reverted to 7.2.24 and TWRP from the TWRP from the phone is back. I think something is broken in 7.3.9 global weekly miui build.
krasCGQ said:
Hi @lalontra,
Use combination of Power+Vol(+)+Vol(-) button. It should boots you to recovery.
Regards.
Sent from my Redmi 3 using XDA Labs
Click to expand...
Click to collapse
For me works
Sent from my Redmi 3 using XDA-Developers Legacy app
The Volume+ and Volume- and Power worked for me even with the rom error. Hold all buttons til you see the Mi logo, then release Power but keep holding both of the Volume buttons. I also reflashed TWRP Recovery via Fastboot, so maybe that was it.
I'm also facing a problem around TWRP 3.0.2.
But different situation
I always failed/unable to boot into recovery or bootloader everytime I click reboot recovery or bootloader button in TWRP recovery mode.
I still try to find a way how to fix it. Because all the articles that I found always explain about "cannot enter to recovery mode from the system", not from the recovery mode itself.
Do you got anything from all the steps above? Please let me know if there something u can share. Thanks in advance
Here's what happened in my xiaomi redmi 3 pro. Always failed to boot into recovery again or into bootloader mode when I'm still in TWRP mode.
lalontra said:
Hi,
Did not work.
I have now reverted to 7.2.24 and TWRP from the TWRP from the phone is back. I think something is broken in 7.3.9 global weekly miui build.
Click to expand...
Click to collapse
Update, once installed 7.3.23 all three buttons combination works!
What still does not work is adb reboot recovery nor reboot in recovery from update page, but this is fine to me.
Thanks a lot!
brittown said:
I'm also facing a problem around TWRP 3.0.2.
But different situation
I always failed/unable to boot into recovery or bootloader everytime I click reboot recovery or bootloader button in TWRP recovery mode.
I still try to find a way how to fix it. Because all the articles that I found always explain about "cannot enter to recovery mode from the system", not from the recovery mode itself.
Do you got anything from all the steps above? Please let me know if there something u can share. Thanks in advance
Click to expand...
Click to collapse
Hello there, Im also facing the same.
I can enter both recovery / bootloader from key combo but not from the system nor TWRP itself. I cannot really find a way to fix issue wich is kinda annoying for us flashaolics...
hope someone can find a way to fix it!
lalontra said:
Hi All,
I have an Redmi 3 pro with unlocked BL and the latest "official" weekly 7.3.9 from xiaomi.eu and latest TWRP 3.0.2.0 from official twrp site.
I am unable to flash twrp.
I flash it with fastboot flash recovery recovery.img then boot into it using fastboot boot recovery.img with no issue at all.
Then,
if i reboot into recovery from twrp itself it still works.
if i let it boot the phone in its bootloader (POW+VOL_UP the one where you can choose "download" "fasboot" or "recovery") and i select recovery, it does not boot. The phone boots instead.
if i choose from the updater to reboot in recovery, same.
if i choose from flashify (which shows me "stock recovery" is installed), same.
if i use adb reboot recovery same.
i can only boot it using command fastboot boot recovery.img.
It just looks like the twrp flash says OKAY but it's not being flashed.
I've also tried cofface recovery with no success.
i've also tried official twrp app with no success.
everytime flash goes fine and successfully, but i'm unable to boot the phone in recovery itself.
i must always use fastboot boot recovery.img
Hints?
Click to expand...
Click to collapse
I'm facing same problem with you since updated to 7.3.9 Global Beta ROM.
I can only boot into TWRP by holding down Power + Vol Up + Vol Down buttons simultaneously.
---------- Post added at 11:59 AM ---------- Previous post was at 11:55 AM ----------
rubenix said:
Hello there, Im also facing the same.
I can enter both recovery / bootloader from key combo but not from the system nor TWRP itself. I cannot really find a way to fix issue wich is kinda annoying for us flashaolics...
hope someone can find a way to fix it!
Click to expand...
Click to collapse
I'm still on 7.3.30, does it fixed in the latest update?
hi I'm using redmi 3s too. This problem happened when I flash new kernel to enable double tap to screen on I flashed twrp using both method: official twrp app and fastboot devices method...did not work but then power off the phone and use power + vol- + vol+ (works))) thanks for this post (note: for those who encouter this problem, when power + vol+ + vol- keep holding the 3 button until twrp logo on ))
phenomejohn said:
The Volume+ and Volume- and Power worked for me even with the rom error. Hold all buttons til you see the Mi logo, then release Power but keep holding both of the Volume buttons. I also reflashed TWRP Recovery via Fastboot, so maybe that was it.
Click to expand...
Click to collapse
Thanks, it worked for me.
So I actually tried installing the TWRP a couple days ago. When I tried to boot to recovery with button combination Vol Up+Power Button it always booted to stock recovery. The thing here is that from the fastboot tool when i boot to TWRP with
Code:
fastboot boot twrp.img
after
Code:
fastboot flash recovery twrp.img
it boots to TWRP and everything works fine. However, since that day i tried flashing the TWRP my phone is lagging very much. I tried to Hard Reset it but it still lags seems like there are some bugs and sometimes a "System UI has stopped" error pops up and it suddenly reboots.
First question: What causes the lags?
Second question: if i re-lock bootloader will the problem stop?
Third question: May that be the case that the .img file of the TWRP has been installed but cannot boot so it might corrupt the bootloader re-lock and hard brick my device?
I'm thinking of relocking it with
Code:
fastboot oem lock
Also sometimes wifi suddenly turns off and won't turn on unless i reboot and it doesn't always work and some system apps stop working as well. when i reboot for the couple first minutes the phones works great no lag no bugs, nothing. Plz someone answer asap i'm going to need the phone and i cannot work with all those lags.
Download the latest fastboot stock rom from here : ( not recovery rom, download fast boot rom.)
https://mirom.ezbox.idv.tw/en/phone/platina/
Flash it with mi flash tool and check the option re lock. Or lock something like that. And the problem should be fixed. Your bootloader will be relocked and your recovery partition should go to normally.
elbatsi said:
So I actually tried installing the TWRP a couple days ago. When I tried to boot to recovery with button combination Vol Up+Power Button it always booted to stock recovery. The thing here is that from the fastboot tool when i boot to TWRP with after it boots to TWRP and everything works fine. However, since that day i tried flashing the TWRP my phone is lagging very much. I tried to Hard Reset it but it still lags seems like there are some bugs and sometimes a "System UI has stopped" error pops up and it suddenly reboots.
First question: What causes the lags?
Second question: if i re-lock bootloader will the problem stop?
Third question: May that be the case that the .img file of the TWRP has been installed but cannot boot so it might corrupt the bootloader re-lock and hard brick my device?
I'm thinking of relocking it with
Click to expand...
Click to collapse
If you want to relock your bootloader, then simply flash the official firmware for fastboot, then select the clean all and lock option in the miflash tool, then the bootloader will be locked