At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
Hi everyone,
I have an Acer Liquid Zest Plus t08 - z628
Here is other info of a device:
Android version: Marshmallow 6.0
Kernel version: 3.18.19+
Build number: Acer_AV0M0_t08_RV01RC03_EMEA_BHT (last three digits "BHT" is probably BH Telecom my carrier in Bosnia)
Chipset: mt6735
==========================================
I want to root this device. I've tried all possible methods i could find on the web. (Kingroot, Kingoroot, Framaroot, MobileGo!, TunesGo!, Root Genius, Baidu root), pretty much all possible "one-click-root" tools available, all methods failed to root my device.
One of the possible solutions is tu flash custom recovery, and flash SuperSu, but the problem is, i couldn't find a twrp or cwm for this device. I searched all the web but I couldn't find it.
Also i tried to make my own cwm using MTK Android tools, but I don't have boot.img file. I can't find boot.img anywhere on the web.
Im desperetly need help because i tried almost everything i know.
If anyone have Stock rom of this device, or boot.img of this device or anything that can help me root this device, please help!
Thanks in forward, and sorry for bad english.
Update:
I've tried apsolutely every possible thing available and failed.
Does anyone have scatter file of this device model?
That file would help me to create a boot image and then to port cwm for my device.
I tried MTK Droid tools to create scatter file but failed. When I click on "blocks map" button it gives me an empty table.
So what I need is:
- scatter file for acer z628 t08
or
- boot.img
or
- recovery.img (cwm or twrp)
or link to original stock rom for this device model.
Any help would be appreciated!
Same problem
I would like to tell you that I found a way, but i didn't. I actually have the same problem, on the exact same phone. My knowledge in phone rooting isn't great so I won't be able to help, but i would be very happy if you could inform me if you find a way.
Hello,
Ask this man. Hi did it for (t7) version. May be he will help you to port twrp.
https://forum.xda-developers.com/an...st-4g-z628-t3534746/post70540747#post70540747
You are not alone!
no your not alone, bluetooth won't work properly on min, alway's disconnect
Upvote
mirzakv said:
Im desperetly need help because i tried almost everything i know.
Click to expand...
Click to collapse
Same problem here
Hi All,
Like Mirzakv i also tried everything, but in addition "One Click Root " tool lead me to the answer this software tool is suitable and claimed it has the power for rooting the Acer Liquid Zest Plus T08 . But unfortunately the "One Click Root " tool stucked the rooting process unless you pay or transfer 35 USD for going on.
Here is the scatter taken from OS_Acer_Acer.AV0M0.T08.1.015.00.WW.GEN1S_A60M_A.zip which can be downloaded from acer's site.
I don't know what is the difference between GEN1 (my case) and GEN1S versions, but I hope that memory maps are the same.
preloader 0x0
pgpt 0x0
proinfo 0x80000
nvram 0x380000
protect1 0x880000
protect2 0x1280000
lk 0x1c80000
para 0x1d00000
boot 0x1d80000
recovery 0x2d80000
logo 0x3d80000
expdb 0x4580000
seccfg 0x4f80000
oemkeystore 0x5000000
secro 0x5200000
keystore 0x5800000
tee1 0x6000000
tee2 0x6500000
frp 0x6a00000
nvdata 0x6b00000
metadata 0x8b00000
system 0xb000000
cache 0xbe800000
userdata 0xd7800000
flashinfo 0xFFFF0084
sgpt 0xFFFF0004
MTK droid version
mirzakv said:
Hi everyone,
I have an Acer Liquid Zest Plus t08 - z628
Here is other info of a device:
Android version: Marshmallow 6.0
Kernel version: 3.18.19+
Build number: Acer_AV0M0_t08_RV01RC03_EMEA_BHT (last three digits "BHT" is probably BH Telecom my carrier in Bosnia)
Chipset: mt6735
==========================================
I want to root this device. I've tried all possible methods i could find on the web. (Kingroot, Kingoroot, Framaroot, MobileGo!, TunesGo!, Root Genius, Baidu root), pretty much all possible "one-click-root" tools available, all methods failed to root my device.
One of the possible solutions is tu flash custom recovery, and flash SuperSu, but the problem is, i couldn't find a twrp or cwm for this device. I searched all the web but I couldn't find it.
Also i tried to make my own cwm using MTK Android tools, but I don't have boot.img file. I can't find boot.img anywhere on the web.
Im desperetly need help because i tried almost everything i know.
If anyone have Stock rom of this device, or boot.img of this device or anything that can help me root this device, please help!
Thanks in forward, and sorry for bad english.
Click to expand...
Click to collapse
Hi Mirzakv,
Which version of MTK Droid root and tools did you used ? Version 2.5.3 ?
we have MT 6735 chip, maybe we are not in this sequence, (MT6572-MT6592), and have to wait for an MTK Droid tool update for rooting the device.
On the Acer website, Netherlands, i see O.S i think this is the stockrom or firmware and this is maybe not the scatter file, but i am not sure.
Maybe Romavnts can help us out, i am not a programmer or electronic engineer, but user only of this smartphone who like to tweak and tink.
Still waiting and hoping for more advice,
regards
Is there still no way to root this device?
The acer website now shows 2 os images:
1. WW_GEN1S
2. TWN_GEN1
Does that help us?
Lol idk much about rooting but it'll be cool to able root my phone XD
(kinda weird cause the image i have is Acer_AV0M0_T08_RV01RC12_PA_GEN1)
Working TWRP recoverimage for ACER T08
Hi Guys
I was also looking for a way to Root the Acer Liquid Zest Plus (T08). My Acer is the Acer_AV0M0_T08_1.018.00_WW_GEN1. I searched the whole Internet and found nothing. So i took the TWRP 3.0.2.1 and ported it for the ACER T08.
Now a little manual to install. First Backup all your Contacts and all the Stuff you wanna keep. Then put the SuperSU-v2.82 on the Phone / SD card in Phone.
First install ADB/Fastboot on your Computer.
Then start a CMD (press Start-button and search for cmd and start cmd.exe) then change to the directory where you have installed ADB/Fastboot.
Next step, put the TWRP_ACER_T08.img into the ADB/Fastboot folder.
Then you have to turn on USB-debugging @ Developer options on your phone. Also unlock Booloader.
Now back to the CMD-window and enter:
adb reboot bootloader - (it will restart your phone and after a few second u see on Display a down left corner Fastboot mode)
Then write at the CMD-window
fastboot getvar all - (look if Bootloader is unlocked. If not write: "fastboot oem unlock" but remember that this will do also a Factory reset on your Phone. )
If your Bootloader ist unlocked write at CMD-window
fastboot boot TWRP_ACER_T08.img -(This will only Boot into TWRP-recovery not Flash it to your Phone. So you can keep the original Acer recovery)
After a few seconds the TWRP recovery starts and u can install the SuperSU-v2.82. After installing wipe cache/dalvik and reboot your phone.
Now your Acer T08 will be rooted.
Everything u need to Root your Phone you can find here:
"https://drive.google.com/open?id=0Bz_0lBBekCI_b3BfM2lDcERCbE0"
Remember: I am not responsible for any damages on your Phone!!!
lucky666666 said:
Hi Guys
I was also looking for a way to Root the Acer Liquid Zest Plus (T08). My Acer is the Acer_AV0M0_T08_1.018.00_WW_GEN1. I searched the whole Internet and found nothing. So i took the TWRP 3.0.2.1 and ported it for the ACER T08.
Now a little manual to install. First Backup all your Contacts and all the Stuff you wanna keep. Then put the SuperSU-v2.82 on the Phone / SD card in Phone.
First install ADB/Fastboot on your Computer.
Then start a CMD (press Start-button and search for cmd and start cmd.exe) then change to the directory where you have installed ADB/Fastboot.
Next step, put the TWRP_ACER_T08.img into the ADB/Fastboot folder.
Then you have to turn on USB-debugging @ Developer options on your phone. Also unlock Booloader.
Now back to the CMD-window and enter:
adb reboot bootloader - (it will restart your phone and after a few second u see on Display a down left corner Fastboot mode)
Then write at the CMD-window
fastboot getvar all - (look if Bootloader is unlocked. If not write: "fastboot oem unlock" but remember that this will do also a Factory reset on your Phone. )
If your Bootloader ist unlocked write at CMD-window
fastboot boot TWRP_ACER_T08.img -(This will only Boot into TWRP-recovery not Flash it to your Phone. So you can keep the original Acer recovery)
After a few seconds the TWRP recovery starts and u can install the SuperSU-v2.82. After installing wipe cache/dalvik and reboot your phone.
Now your Acer T08 will be rooted.
If you want to flash the TWRP recovery to your Phone write at CMD-window
fastboot flash TWRP_ACER_T08.img
Everything u need to Root your Phone you can find here:
"https://drive.google.com/open?id=0Bz_0lBBekCI_b3BfM2lDcERCbE0"
Remember: I am not responsible for any damages on your Phone!!!
Click to expand...
Click to collapse
After such a long time my t08 is FINALLY rooted!
I did all the steps, and everything worked 100% as you said. I still can't beleive!
Thanky you million times!
P.S. i can't flash ported twrp there is somekind of error when i type "fastboot flash TWRP_ACER_T08.img"
but I can boot into the ported twrp and boot works fine!
Thanks one more time!
P.S. 2:
I didn't do wipe data and cache after flashing SuperSu, I just rebooted the phone and everything went just perfectly fine. My phone is intact, and rooted =
mirzakv said:
After such a long time my t08 is FINALLY rooted!
I did all the steps, and everything worked 100% as you said. I still can't beleive!
Thanky you million times!
P.S. i can't flash ported twrp there is somekind of error when i type "fastboot flash TWRP_ACER_T08.img"
but I can boot into the ported twrp and boot works fine!
Thanks one more time!
P.S. 2:
I didn't do wipe data and cache after flashing SuperSu, I just rebooted the phone and everything went just perfectly fine. My phone is intact, and rooted =
Click to expand...
Click to collapse
Sorry that a error happen while trying to flash the recovery, but i haven´t tried to flash it on my phone cause i wanted to keep the original recovery. But i´m happy to hear that it finally worked for you with the Bootway.
Just followed your instructions, worked perfectly. Thanks a lot!
Thanks a lot! You are great!
But I had a problem with Windows10. After adb reboot bootloader command phone restarted to Fastboot mode. And there was no connection.
On Ubuntu16 everything was fine.
I need help...
Guys please, I need some help... my phone is stuck in the select boot mode thing, it isn't responding. I don't want to lose my phone, please help me...
Edit: It's ok, but for now, my problem is that i don't know how and where to put the twrp image...
Edit 2: Finally worked it out... You need to write fastboot boot WhereYouPutYourTwrpImage Ex: fastboot boot C:\adb\TWRP_ACER_T08.img
That was for the not that much tech people like me...
i cant find the of twrp
how to port twrp on acer plss send tutorial
luciapao211 said:
how to port twrp on acer plss send tutorial
Click to expand...
Click to collapse
I ported the TWRP with this instruction.
"***.chinaphonearena.com/forum/Thread-Tutorial-HOW-TO-PORT-TWRP-MT6735-MT6752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial"
Thank you for your hard work
not recognized
Hi there. My liquid zest plus doesnt show up in adb devices or fastboot devices. Also I apparently have no os and no system files. I have twrp installed but cant install any of the roms for the t08 because apparently my internal storage and system cant be mounted. Any suggestions please? Im desperate.
Thanks
Hello all,
I'm a long date not registered user but after tryIng root my Blu Vivo 5 MINI a whole week I've come to the conclusion to ask for your help!
I'll try put all the things and methods I tried to achieve this, but not succeeded.
Device info:
BLU Vivo 5 Mini
Android version 6.0;
Build number: MRA58k
Baseband version MOLY.WR8.W1499.MD.WG.MP.V57.P14
Chipset: MT6580
What I've tried so far:
After enable USB debugging and unlock oem. I uninstalled my antivirus too.
- Tried root with one click programs like Kingroot, genius root, etc. The programs can verify the model vivo 5 mini but can't complete the process.
- Tried root with SP Flash Tool taking the stock rom and replacing the recovery.img by a twrp-recovery.img for chipset MT6580. After sucessfuly flashed and turn device on with power button + volume up button the system displays that's entering Recovery Mode but reset automatically doing a reboot. When I gave up of repeating this and let the device reboot I comes as a reseted stockrom or it soft bricks looping the boot screen until battery end.
- Tried flash recovery.img for mt6580 chipset by fastboot. Made device listed from adb devices, then entered fastbook mode by adb reboot bootloader and flash it with fastboot flash recovery recovery.img. At the phone screen displays data transfer status Ok and then when rebooted I get the same flooping error, cant enter twrp because I don't know why and when I let it go I get a reseted stockrom again or soft bricked.
I tried made this last step too doing the adb erase recovery.img and trying again. Tried made before it all some adb kill-server and adb start-serve and also kill the adb.exe process from task manager processes.
Can anyone please, help me? What should I do? Anyone already rooted sucessfuly a Vivo 5 MINI?
Hope you can help me and made me able to use the full potential of my phone.
goodfox said:
Can anyone please, help me? What should I do? Anyone already rooted sucessfuly a Vivo 5 MINI?
Hope you can help me and made me able to use the full potential of my phone.
Click to expand...
Click to collapse
Don't have a MINI. I found a twrp that was close to my XL2, used Carliv Image Kitchen to unpack it and the stock recovery. Had to redo some files, TWRP building thread shows correct formats and info needed, so read that and adjust for your MINI. Repacked using Carliv then flashed using SPF Tools. Once it worked, I backed up all my partitions then flashed SuperSU.
Once I realized I had all the info I needed to build TWRP, that is what I did.
smith901 said:
Don't have a MINI. I found a twrp that was close to my XL2, used Carliv Image Kitchen to unpack it and the stock recovery. Had to redo some files, TWRP building thread shows correct formats and info needed, so read that and adjust for your MINI. Repacked using Carliv then flashed using SPF Tools. Once it worked, I backed up all my partitions then flashed SuperSU.
Once I realized I had all the info I needed to build TWRP, that is what I did.
Click to expand...
Click to collapse
Thank you for your light!
I'll sit and study this a little deeper, hope have some time soon. When I get informations and try new things I back here let you guys know.
If anyone still knowing something more, please, share here in the thread
Blu Vivo 5 Mini
For full disclosure I am not a developer so my anticipated apologies for any comments that sound weird.
I got a Blu Vivo 5 Mini for using as a data collection on a field project, expecting it would be OTG compatible. It happens that it is not from out-of-the-box.
I've been trying all sorts of suggestions to root it available on this and other threads but nothing works.
I spoke to Blu this morning and they told me that the hardware in this phone is not compatible with OTG. I am trying to understand what that means. Using OTG checker it only says I am missing the USB Host file.
Appreciate any light on this.
here is how to root the blu vivo 5 mini
I know i am a little late to answer this question
follow this thread
https://forum.xda-developers.com/android/general/rooting-blu-vivo-5-mini-using-twrp-guide-t3924895
Hello
I own a brand new Condor Allure M3 shipped with Android 8.1 (It has project treble). It has 4GB RAM and has a Mediatek Helio P60 (MTK6358) CPU. It is not rooted. The bootloader is unlocked too. I'm wanting to install TWRP on it, so I'm searching to get the recovery.img. I searched on Google how to do it and it asks to use adb and to make "cat /proc/mtd". After doing that, the file does show nothing, only the size etc... thing, so I don't know how to extract it.
I read that there is a way to root devices using MediaTek CPU, and I also read about Project Treble (my phone does have it).
Please help me installing TWRP or rooting it, it will be a big step.
Thanks !
UP please