Related
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Download Flashtools from http://androxyde.github.com/
Download a stock ftf rom from here http://forum.xda-developers.com/showthread.php?t=1599303
Put the downloaded rom in the flashtool/firmwares/ folder, then go to flashtool/drivers/ folder and run Flashtool-drivers.exe, when that has finished restart your computer.
Turn phone off, now press and hold the volume down button and connect the phone to your computer with the usb cable, when you get a green led you can let go, you are now in flash mode.
Start up flashtool, or flashtool64 if your on an x64 system, click the thunderbolt icon in the top left corner, select flashmode and click ok, in the left hand window select the rom you downloaded and then click ok in the bottom right corner.
karder said:
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Click to expand...
Click to collapse
Is your Bootloader unlocked?
Hello, I'm having the same problem too, but I wonder how do I "turn off" the device, since I keep pressing the top button to do this and it reboots and goes into CWM mode? Will I have to remove the battery?
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
You guys must have used cmd to flash nozomi-recovery.img?
Sent from my LT26i using Tapatalk 2
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
hdegenaro said:
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
Click to expand...
Click to collapse
That's why I hate nozomi - recovery.img!
Nothing to worry... Happened to me too.
Use flashtool to reflash entire ftf(if you have ulbl) else use SEUS to repair (if you have lbl, I hate pcc!).
If lbl.... Then ulbl.
Use cmd to flash a custom kernel(don't use doom kernel its for gb).
Finished....
Thank... If helpful
Sent from my LT26i using Tapatalk 2
hmm
Had a similar problem.. FIxed it with a lot of reading but now dnt remeber anymore :/
I'm having this problem too...
Almost everything is ready for flashing now, except the phone is not really turning off, even after 3 vibrates when holding down power and volume up... It turns off, but coming back in flash process!
That's how far I can go: It turns off, I hold down volume down, connect it to PC, have a green light. Flashtool see the phone, I push Flash button,Program gives "Device connected in flash mode" message, then "Selected Xperia s (LT26i)_WORLD_6,1,A,2,50_IT.flf" message, "Preparing files for flashing" message and "Device disconnected" message, because this stupid Recovery back on my screen again...
If I just can find the way to turn off my phone, so it's not come back to live when connected to PC...
hdegenaro said:
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
Click to expand...
Click to collapse
Please, tell me which option do you mean..? It's no such an option like "Reset the device"...
SOLVED!
I manage to fix it!
Just wait for Flashtool to give error message (with phone picture and USB cable in it) and ask to reconnect device. Unplug device, press power button and volume up button until vibrate 3 times. Push volume down and plug usb cable, to get green light. Flashtool continue process from where it was broken.
Error message popped up not from first try, so hopefully this will be helpful to somebody...
Sorry for my english...
Many Thanks
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
neel-arnab said:
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
Click to expand...
Click to collapse
You wrong section!
Xperia P, U, Sola, Go Q&A, Help & Troubleshooting
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
Good day to you all kind folks!
Basicly, i have the same problem as mr. adijat from http://forum.xda-developers.com/showthread.php?t=1816263 .
I was digging about link2sd with the phone from the subject and messed it up.
I managed to get it to boot to android again, but with limited capability:
1. Once connected to PC, it only charges, no mass storage, no usb debuging, no nothing.
2. Half of the applications are missing, like GooglePlay, Google Account Sinchronization etc.
I did try to install those manually, but to no avail, if i try to install GooglePlay.apk it just says: Application not installed.
I was google-ing for a way to adb push those applications, but i have no idea what parts of android system are responsible for USB controlers, and every try to find out doesnt end so good.
As for the original stock rom/firmware from huawei, they DO have the phone listed on their download page, but nothing to download from there, and from another sites i cant seem to find the specific rom for this model, although i've tried to install some similar ROMs like official U8650 and S8600, none worked ( when i enter in update screen, step 1/2 finishes and as soon as step 2/2 starts it says "Update Failed" and thats it.
I can't seem to get it to fastboot mode anymore also (Shut down > Plug to PC > Volume down+Power 2 sec > 10 sec Power ), because when i plug it in to PC while its shut down it doesnt go to battery charging screen, it just stays on white loading screen.
I'm baffeled with this, i'm not much of an expert on this stuff but i know the basics, and cant figure it out.
If anyone has any solutions, it would be great!
Greetings from Croatia and I'm sorry in advance if i posted in wrong part of the forums, this is the best i could find.
bagio007 said:
Good day to you all kind folks!
Basicly, i have the same problem as mr. adijat from http://forum.xda-developers.com/showthread.php?t=1816263 .
I was digging about link2sd with the phone from the subject and messed it up.
I managed to get it to boot to android again, but with limited capability:
1. Once connected to PC, it only charges, no mass storage, no usb debuging, no nothing.
2. Half of the applications are missing, like GooglePlay, Google Account Sinchronization etc.
I did try to install those manually, but to no avail, if i try to install GooglePlay.apk it just says: Application not installed.
I was google-ing for a way to adb push those applications, but i have no idea what parts of android system are responsible for USB controlers, and every try to find out doesnt end so good.
As for the original stock rom/firmware from huawei, they DO have the phone listed on their download page, but nothing to download from there, and from another sites i cant seem to find the specific rom for this model, although i've tried to install some similar ROMs like official U8650 and S8600, none worked ( when i enter in update screen, step 1/2 finishes and as soon as step 2/2 starts it says "Update Failed" and thats it.
I can't seem to get it to fastboot mode anymore also (Shut down > Plug to PC > Volume down+Power 2 sec > 10 sec Power ), because when i plug it in to PC while its shut down it doesnt go to battery charging screen, it just stays on white loading screen.
I'm baffeled with this, i'm not much of an expert on this stuff but i know the basics, and cant figure it out.
If anyone has any solutions, it would be great!
Greetings from Croatia and I'm sorry in advance if i posted in wrong part of the forums, this is the best i could find.
Click to expand...
Click to collapse
bagio007 do not try to restore with another roms because it is useless. try it only with fastboot ...
you nedd to boot in recovery mode and try to flash with fastboot
boot.img
recovery.img
system.img
STEPS:
Turn off the phone, disconnect the USB cable and remove the battery
Reinsert the battery into the phone
Turn on phone into fastboot mode
Press the volume up button for 1 second.
Holding volume up, press the power button, holding down both buttons for 4 seconds.
After that, release the power button first, then the Volume Up button.
The screen should remain black ...
Try to reset factory a prhone in recovery mode ..
move the bar with volume up/down key and power button to accept
if not wort thats try to flash with fastboot
Reconnect the phone and verify, that the phone is in fastboot. Type into the Command Prompt or terminal:
fastboot devices
Now flash the firmware:
fastboot flash boot /path/to/boot.img
fastboot flash recovery /path/to/recovery.img
fastboot flash system /path/to/system.img
fastboot flash userdata /path/to/userdata.img
Reboot the phone
fastboot reboot
i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?
Is your bootloader unlocked?
If yes then flahs
Sent from my LT22i using XDA Premium 4 mobile app
Hamza Murad said:
If yes then flahs
Click to expand...
Click to collapse
what?
Is it unlocked?
When I bricked my xperia p I flashed a custom kernel which allowed me to enter Cwm and then flashed the stock rom. I am new to this flashing thing so I recommend that you ask someone experienced what to do. I just shared my experience of recovering from a softbrick. Don't flash new things blindly but ask someone experienced before doing so.
Sent from my LT22i using XDA Premium 4 mobile app
the bootloader is unlocked, and i'm not new to this "flashing thing"
anyone? the phone still hasn't woken up
download firmware for your p and flash using flashtool...
Osku958 said:
the bootloader is unlocked, and i'm not new to this "flashing thing"
Click to expand...
Click to collapse
Have you used flashtool to flash firmware before on that PC?
Have you installed flashtool and it's drivers (sola, flash & fastboot mode).?
Make sure the phobe is off, press power + volume up untill you feel 1 + 3 vibrations and see if it stay in flash mode longer.
Just Flash stock
i have nearly the same problem
my xperia u was running with 4.1 then i restored my ta backup its mine not for someone else then i pressed reboot instead of power off then my phone is dead no vibration no led except the one when i plug it to charger just one red led then nothing
AndroidNoob69 said:
Just Flash stock
Click to expand...
Click to collapse
how? the phone doesn't boot and flashtool doesn't recognize it
Same problem here, I think that Munjeni's post is bad written.
Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.
manudo said:
Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.
Click to expand...
Click to collapse
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.
i happens to me yesterday
Hi ! Dont worry u r not the first to face this problem i also face this problem yesterday.. my phone was on JB 4.1.2 i download custom ICS rom and install it through CWM Recovery mode, when my new custom Rom starts it stucks on Boot screen and then nothing happens i tried but my phone was in danger... i was worried then i install flash tool and downlaod ICS Rom for Flastool and install that after severals trys i was now ion ICS v4.0.4..
Just Press volume up key and power simultanly when phone vibrtes three time leave it for 30 sec. and then run Flashtool and follow step to install another or same Rom for Falshtool & You r Done ...:good: Sorry for my bad english and type mistakes...
Osku958 said:
i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?
Click to expand...
Click to collapse
akkufix said:
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.
Click to expand...
Click to collapse
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.
manudo said:
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.
Click to expand...
Click to collapse
That's why i'm working over 8 years till now with Linux.
HELP: i had been going to flash MR by myself, but when i tried to unlock it and flashed the rooted 'boot.img' extracted from 'Z4T_SGP771_AndroPlusKernel_v4.zip', i don't get the 'supersu' on the desktop properly, after tried a few times, i did a factory reset, it now hangs on boot logo, there is no response to 'power' button long pressed down, looks it will power down until battery goes up, does anyone also experience this? how can i restore this?
The link i'm following:
cwm-twrp-android.net/download/sony-xperia-z4-tablet-lte/
it prevents me paste the outside link since this my first post, so i removed http prefix.
I solved it by myself, after pressing 'Volume Down' + 'Power', it reboots, and looks the factory reset did nothing, it's weird.
On the .260 firmware AndroPlusKernel v4 won't work. I had the same thing when I accidentally flashed v5. You'll need v10. Also, download this stuff from official sources, look in the AndroPlusKernel thread here on XDA.
So, get into fastboot in some way (I don't know how I got back into it, just hammered the volume rocker) and flash the correct v10 boot.img.
Wei Xu said:
I solved it by myself, after pressing 'Volume Down' + 'Power', it reboots, and looks the factory reset did nothing, it's weird.
Click to expand...
Click to collapse
Hi,
to go in fastboot mode press and hold down volume up and connect to your Pc, the led become blue
To go in flash mode press and hold down volume down and connect to your pc, the led become yellow for a few seconds so you must be fast to enter the command in ADB
killdozer56 said:
Hi,
to go in fastboot mode press and hold down volume up and connect to your Pc, the led become blue
To go in flash mode press and hold down volume down and connect to your pc, the led become yellow for a few seconds so you must be fast to enter the command in ADB
Click to expand...
Click to collapse
Thanks a lot for your comments, i have root it successfully, is there anyone made it to flash MarshMallow? i tried to update it with TWRY with officially binary SW_binaries_for_Xperia_AOSP_M_v01_2.zip, but it tells 'Could not find 'META-INF/com/google/android/update-binary' in the zip file', does anyone know how to survive this?
I also find a AOSP version 'AOSP_L_MR1_160113_karin.zip' from www.androidfilehost.com, but it only contains image file, i tried to flash them all, others(boot, userdata, recovery) are all ok, but it hangs at flashing 'system.img', i terminate it forcely after waiting for 20+ mins, the system boot up back to 5.0.2 after that.
If i use TWRP to install this zip, it tells the same error with the official binary, anyone know if this will work?