I've bought 2 different QC power banks:
AIDEAZ Power Bank 20000mAh Portable Charger
https://www.amazon.ca/dp/B07GJHNRK9/ref=cm_sw_em_r_mt_dp_U_8697Cb90CYK1E
iWALK Wireless Portable Charger 10000mah Power Bank
https://www.amazon.ca/dp/B07FMVRD6K/ref=cm_sw_em_r_mt_dp_U_E897CbKW2P4PD
I also own
Anker Powercore Speed 10000 QC, Qualcomm Quick Charge 3.0 Portable Charger
https://www.amazon.ca/dp/B01JIYWUBA/ref=cm_sw_em_r_mt_dp_U_Q997Cb1HQ367J
NONE of them fast charge my S9+ even though when I use the wall charger it fast charges. I even have a USB power meter to confirm that these power banks are only outputting 5V 1A.
I don't get it, works with wall charger, but not with power bank.. Anyone else have this issue, or can recommend a power bank that actually does fast charge?
SO FRUSTRATING!
pirellip said:
I've bought 2 different QC power banks:
AIDEAZ Power Bank 20000mAh Portable Charger
https://www.amazon.ca/dp/B07GJHNRK9/ref=cm_sw_em_r_mt_dp_U_8697Cb90CYK1E
iWALK Wireless Portable Charger 10000mah Power Bank
https://www.amazon.ca/dp/B07FMVRD6K/ref=cm_sw_em_r_mt_dp_U_E897CbKW2P4PD
I also own
Anker Powercore Speed 10000 QC, Qualcomm Quick Charge 3.0 Portable Charger
https://www.amazon.ca/dp/B01JIYWUBA/ref=cm_sw_em_r_mt_dp_U_Q997Cb1HQ367J
NONE of them fast charge my S9+ even though when I use the wall charger it fast charges. I even have a USB power meter to confirm that these power banks are only outputting 5V 1A.
I don't get it, works with wall charger, but not with power bank.. Anyone else have this issue, or can recommend a power bank that actually does fast charge?
SO FRUSTRATING!
Click to expand...
Click to collapse
I bought one called my charge any the fast charge on it is a complete joke. Says 2 hours and 35 mins. Vs 2 hours cable chargeing and 1:35 on the Samsung cable the phone comes with.i would return the I walk one of I were you. That's junk.
Sent from my SM-G965U1 using Tapatalk
Found one that fast charges!
https://www.amazon.ca/gp/product/B019IEPGAC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
it's the RAVPower 20100 Portable Charger
My xiaomi powerbank 2nd edition 10000 mAh fast charge only with original cable, sometime need to unplug and flip. Problem since updated to Pie, on Oreo all my powerbank and chargers works fast charge.
pirellip said:
I've bought 2 different QC power banks:
AIDEAZ Power Bank 20000mAh Portable Charger
https://www.amazon.ca/dp/B07GJHNRK9/ref=cm_sw_em_r_mt_dp_U_8697Cb90CYK1E
iWALK Wireless Portable Charger 10000mah Power Bank
https://www.amazon.ca/dp/B07FMVRD6K/ref=cm_sw_em_r_mt_dp_U_E897CbKW2P4PD
I also own
Anker Powercore Speed 10000 QC, Qualcomm Quick Charge 3.0 Portable Charger
https://www.amazon.ca/dp/B01JIYWUBA/ref=cm_sw_em_r_mt_dp_U_Q997Cb1HQ367J
NONE of them fast charge my S9+ even though when I use the wall charger it fast charges. I even have a USB power meter to confirm that these power banks are only outputting 5V 1A.
I don't get it, works with wall charger, but not with power bank.. Anyone else have this issue, or can recommend a power bank that actually does fast charge?
SO FRUSTRATING!
Click to expand...
Click to collapse
I have a Regular S9 and Anker powerbank works great for me for fast charging.
sunny1119 said:
I have a Regular S9 and Anker powerbank works great for me for fast charging.
Click to expand...
Click to collapse
Yeah, I don't get it. I thought it was just my phone, but then I tried my friends with the same result. Maybe it's got something to do with the carrier software? But I'm on Bell and my friend's on Rogers, so unless it's a Canadian thing.. weird.
Related
Anyone has this power bank?
If yes, how do you find it with Nexus 6? I meant the charging speed.
This is quite small power bank that has quick charge 2.0 support.
I think it's the smallest in the world, at least for now.
http://www.amazon.com/Quick-Charge-Anker-PowerCore-10050/dp/B013HSQXZC
It also can be fast charged using quick charge wall charger.
I don't like big bulky power bank.
Nice! I wanna buy it.
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.
plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.
I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.
Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!
I use the QC3.0 charger from Anker and a separate USB-C from Anker as well but I keep getting the notification of slow charging instead of going cable charging or fast charging.
Are there any workarounds to this aside from buying a wall adapter from them?
kenadroid said:
I use the QC3.0 charger from Anker and a separate USB-C from Anker as well but I keep getting the notification of slow charging instead of going cable charging or fast charging.
Are there any workarounds to this aside from buying a wall adapter from them?
Click to expand...
Click to collapse
I use anker's powercore+ powerbank with qc3.0 port and no issues. Try to use original samsung cable. If you can try also samsung adapter. If it doesnt work, go to battery management and options, there will be fastcharge option you can disable or enable.
Sent from my Galaxy S9+ using XDA Labs
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.