hi
my phone is stuck on the teamwin bootlogo.
cant do anything
can you please help
Yeahmään said:
hi
my phone is stuck on the teamwin bootlogo.
cant do anything
can you please help
Click to expand...
Click to collapse
What were u doing when u got stuck?
I flashed a recovery then a rom after that I made a reboot and and got stuck
Hi there,
Mine is doing the same, did you find a fix for this?
LDP12 said:
Hi there,
Mine is doing the same, did you find a fix for this?
Click to expand...
Click to collapse
What you did it to get stuck on the teamwin bootlogo?
Even for me it gets stuck. I usually get it stuck if i use recovery option under twrp (for e.g. recover anything via twrp backup, may be my nandroid backup). The device successfully recovers, but thereafter twrp is no longer usable even after uninstalling and reinstalling it. The only way I am left out with is to remove twrp and perform a factory reset(but via erecovery) or just dload again.
there are 2 different twrp recovery, one is which work only with emui, other are which works with emui and custom rom (maybe decryption will not work with second)
if you will use second twrp what are treble enabled, then you shuld be able to use twrp with custom rom
ofcorse, if you flash wrong twrp, what isnt meant for your device, you will be stuck on twrp logo too!
there are twrp treble for p20 lite : https://forum.xda-developers.com/huawei-p20-lite/development/recovery-twrp-3-2-1-0-t3782866
kilroystyx said:
What you did it to get stuck on the teamwin bootlogo?
Click to expand...
Click to collapse
Hi, thanks for your reply. I actually found a twrp that works fine (no decryption though, as you mentioned, which is a bit of a pain but at least it works). I just fastboot flashed recovery_ramdisk - sorted.
so i downloaded magisk and twrp then realized i had a miui 11 update so i updated then it rebooted and went to twrp i was confused so i went to reboot and system then clicked and now its stuck on pocophone by xiaomi powered by android what do i do please help iam seriously scared
seems like dmvarity issue
flash magisk20.1 again,
and reboot
2. if bootloop again then this means you have encryption error, FORMAT DATA from wipe (you will loose all your data) and try!
also if still you are stuck at bootlogo then
flash miui11 recoveryrom via twrp then reboot, complete miui11 setup and comeback for magisk
the final solution would be to flash miui11 FASTBOOT ROM via flasher, (pc) which will wipe all your data , then reboot, then miui11 setup, then comeback to twrp for magisk
flashing miui and magisk altogether always went in bootloops or screen freezes for me too!
Dear guys
I tried to help a friend of mine rooting his Pocphone F1
SO these have been my steps:
Unlocked bootloader
Booted TWRP (only boot ... no instalation)
Installed last MAGISK (20.1 if I remember well)
Reboot to System
In some cases when I reboot I obtain a soft boot loop
Only pressing pwr+Vol up several times (honestly I have not yet understood which is the right magic sequence ...) I have the right boot to Android
Any idea to fix the issue ?
Thanks a lot
Paolo
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
You have to be decrypted or flash DMverity for A12. I assume You mean Magisk 24.1 the current version is 24.3
Hi. This is what I did:
I downloaded and installed original firmware through fastboot (fastboot was still on).
I also installed original recovery through fastboot.
After that my oneplus 5t was in stock condition, apart from the bootloader, which was unlocked.
After that I managed to install TWRP through fastboot, and then lineage 19.
The thing is that TWRP doesn't support lineage 19, for one reason or another. Or it could be the other way around (lineage 19 doesn't support TWRP). In any case I had a phone which would only go in fastboot mode.
At least I knew what to do, as I did it already: reinstall stock firmware and recovery.
Long story short, I installed LOS recovery and lineage 19, and everything works fine.
Thanks everyone, and especially thaidroid, for the support.
Have a nice day.
miclombardo said:
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
Click to expand...
Click to collapse
Its not working cus you need to format data in recovery and then reboot it.
kirknado18 said:
Its not working cus you need to format data in recovery and then reboot it.
Click to expand...
Click to collapse
It wont boot cus your encrypted formatting data will allow op5t to boot.
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
paradoxiumwind said:
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
Click to expand...
Click to collapse
What recovery are you on? TWRP?
I use the one posted alongside each version: https://download.lineageos.org/dumpling
can you help?
I need to root so I can titanium backup everything. but I can't root. I suspect I might need to fully format and wipe and start again, I tried wiping data and doing a fresh install, but after sideloading magisk it just fails to boot every time now.
Does it boot regularly BEFORE installing magisk? I am trying to define the source of the problem.
I have installed lineage 19 and magisk, and I confirm you that it's possible
Yes. It boots fine if I just install lineage then nevermindthegapps. problem only occurs if I flash magisk. I tried installing the .apk and patching the .boot image manually in it and then fastboot flashing that, but same thing.
oh - one possible thing that it may be - is that I had a couple of modules loaded (I think a gcam fix mod and something similar) in magisk, and I read somewhere about people having them stuck 'installed' despite demoving all traces of magisk app. whether that is the problem I don't know.
This is very strange. That's what I did:
Sideload lineage recovery
Sideload lineage 19
Download magisk apk
Patched boot image from lineage 19.zip
Sideload the patched boot image
And that's it it all worked
May I suggest you to start all over again?
is wiping system data sufficient or do I need to format it? I'd rather not lose my appdata- but I can't rescue it without root / titanium backup :/
Try first without formatting, and see how it goes
I wiped system/cache, installed lineage-19.1-20220719-nightly-dumpling-signed.zip / mindthegapps, phone booted up fine - rebooted fine.
ok, good. Now download latest magisk app and patch the boot img.
do I click patch vbmeta in image?
Yes.
First extract the file called boot.img from lineage.zip you just installed.
Then in magisk select "patch vbmeta in image".
Magisk should produce a file named something like " magisk_pached-24300_f41h3.img".
That patched file should be sideloaded.
Installation is explained really well by topjohnwu
it wouldn't flash without selecting vbmeta, so tried with, flashed it, now i'm sitting looking at the boot logo.
I am currently on pixel experience 13.0 and I tried to boot to recovery and I am
Stuck in the bootloop any solutions ?
dieccast39 said:
I am currently on pixel experience 13.0 and I tried to boot to recovery and I am
Stuck in the bootloop any solutions ?
Click to expand...
Click to collapse
It really depends on the reason why it bootlooped, did you install a Magisk module or did something else related to root?
I had magisk yes ! But the most recent thing that I updated recovery to the latest
It’s ok I fixed it! Thanks
Hi there,
I ****ed up and I'm now stuck in bootloop with no access to a computer and was wondering if I could do anything to solve my issue.
I've been testing blu spark kernel for months and wanted to go back to stock kernel.
I flashed my backup from FKM (made it with FKM too) and now I'm in bootloop.
My backup was from january build and my phone has been updated to february build since. Is it the reason of the bootloop ?
Anyway, I'm in a bootloop now and I only have an other rooted Pixel 6.
Can I do anything with it ?
I tried Android Flash Tool from Google within Chrome but the download of the rom is always stucked at some point.
I tried magisk adb module but I'm afraid it's not up to date as I'm still in fastboot after I flashed the bootloader and update the image.
Any ideas ?
First try to turn off your phone and then reboot to bootloader. Download factory image and launch flash-all.bat.
Sorry for your datas.
I haven't been able to launch flash-all.sh with termux with the second Pixel 6 I have as the fastboot version from the magisk module is too old.
I don't have a computer to do it.
bobby8921 said:
I haven't been able to launch flash-all.sh with termux with the second Pixel 6 I have as the fastboot version from the magisk module is too old.
I don't have a computer to do it.
Click to expand...
Click to collapse
Get a computer, or at least borrow one so you can restore your device using Google's flash tool. You're not fixing your bootloop without one.