Related
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Problem
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
hossein_vlz1 said:
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
Click to expand...
Click to collapse
1. Download your device boot.img
2. Move to your phone SD Card
3. Install magisk apk
4. now setup you magisk output format as .img.tar
5. now click on install
6. click on patched boot image
7. Now browse you boot.img
8. now wait for success
9. now find "patched_boot.img.tar" and move to your pc
10. reboot your phone into download mode
11. now flash patched boot img with odin
12. now your phone will restart. if it shows reset button on bottom of screen than reset your phone
Done.
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
hossein_vlz1 said:
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
Click to expand...
Click to collapse
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
Flashfire not working.
He says install Magisk 18 again. However, Magisk 18 is not installed again.
alien.baba said:
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
Click to expand...
Click to collapse
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
hossein_vlz1 said:
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
Click to expand...
Click to collapse
now install magisk manually with apk.
your root will done.
Note: you should connected with internet & Yellow triangle will show in boot.
Need Help
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
hi
imranhussain12 said:
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
Click to expand...
Click to collapse
I think
flash twrp via odin. then use twrp to install magisk
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
barinbektas said:
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
Click to expand...
Click to collapse
Biraz daha sabredin. Yakında birşeyler olacak.
Help with Magisk Installation
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
smt_best said:
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
Click to expand...
Click to collapse
flash using Odin. it's petched_boot.img.tar file. you don't need to fo to fastboot go to download mode by pressing Volume Down+Home Button+Power On Key.
Prerequisites :
Running Stock MIUI
Unlocked Bootloader
Fastboot
Disclaimer : I am not responsible for any damage to your device.
Click to expand...
Click to collapse
Download :
11.0.1 Patched
Instructions :
Download the patched boot image
Install the latest version of Magisk Manager
Reboot the phone in fastboot mode [Power + Volume Down]
Use the following command via command prompt :
Code:
fastboot flash boot magisk_patched.img
fastboot reboot
The phone will reboot into system.
Open Magisk Manager & It'll Show Magisk Is Installed.
You've got a rooted Redmi K20 Pro.
Patched Boot Image Not Available For Your Model Yet? :
1. Download the fastboot flashable stock rom zip from the firmware thread
2. Copy the boot.img to internal storage of your device
3. Install Magisk Manager and tap on patch boot image.
4. Select the boot.img that you just copied
5. A patched boot.img will be placed in the Downloads folder on your device
6. Copy the patched image file to your workstation and follow the afformentioned fastboot instructions
Regards,
acervenky
Reserved
What boot image is it from?
Chinese, Indian ROM?
Edit: my bad, just reread the title :silly:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
KramYY said:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
Click to expand...
Click to collapse
No you won't lose your personal data, and yes you can still receive OTAs.
Regards,
acervenky
Thanks for sharing.. Working perfectly
Will test more update you incase of any issues
Sent from my Redmi K20 Pro using Tapatalk
Do you think there is any chance of getting the higher refresh rate mods working with this rom at all? TIA
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
P12AV33N said:
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
Click to expand...
Click to collapse
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
acervenky said:
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
Click to expand...
Click to collapse
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
P12AV33N said:
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
Click to expand...
Click to collapse
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
acervenky said:
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
Click to expand...
Click to collapse
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
P12AV33N said:
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
Click to expand...
Click to collapse
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Edit - I use the TWRP from wzsx150 and I am on the 9.7.27 developer rom from xiaomi.eu
b0b3rman said:
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Click to expand...
Click to collapse
The process mentioned in OP doesn't require TWRP, the option 5 will be available in the magisk manager itself!
If you're a advanced user and have flashed TWRP you do not need to follow this method, just flash the magisk zip and you're ready to go!
Regards,
acervenky
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
b0b3rman said:
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
Click to expand...
Click to collapse
Once you install the OTA and reboot you will lose TWRP as it will be replaced by the stock recovery!
Simply flash TWRP back and flash the magisk zip and you should be good to go!
Regards,
acervenky
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
superuser#1508 said:
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
Click to expand...
Click to collapse
Yes you'll lose your data during the bootloader unlock process, best way would be to backup all of your data on your PC first.
The only precaution is that you should be on Indian Firmware 10.3.3!
Regards,
acervenky
acervenky said:
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
Click to expand...
Click to collapse
Great work! I cannot fully install magisk as I get bootloop everytime I install the zip in the manager (then have to wipe data etc). Im assuming this way I can say goodbye to TWRP and have a fully functional magisk
However, this would also work on chinese phone flashed with Indian/Global ROM yes?
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?
I want to access /data/system/users//settings_ssaid.xml to know what my game unique id is.
But after some research i learned that i have to root to able to get there but i have almost zero knowledge about it.
Are there any guide to root Redmi Note 10 from the scratch? Thanks.
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm on official global ROM 12.5.3.0 RKGMIXM
And i turned on OEM Unlocking in developer mode yesterday (Which is confuse me a little a guide said i have to wait for 7 days for this but mine is nothing it's just switched to on)
OEM Unlocking is only one of the steps, but it does not unlock the bootloader. File a request with Xiaomi.
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
inn0ichi said:
...
i recommend only booting to twrp, not flashing it
...
Click to expand...
Click to collapse
Why do you recommend to only booting to TWRP instead of flashing it?
Pasarireng said:
Why do you recommend to only booting to TWRP instead of flashing it?
Click to expand...
Click to collapse
because the twrp developer instruction is to booting , not flashing
alonsoj636 said:
because the twrp developer instruction is to booting , not flashing
Click to expand...
Click to collapse
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Risk of bootloop
Pasarireng said:
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Click to expand...
Click to collapse
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Y
alonsoj636 said:
Risk of bootloop
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Click to expand...
Click to collapse
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Pasarireng said:
Y
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Click to expand...
Click to collapse
Yes , is the correct way
inn0ichi said:
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
Click to expand...
Click to collapse
Please confirm these;
*So we can:
Use TWRP only temporarily, only to root the phone (by flashing Magisk v23),
and then,
back to using the stock recovery on our RN10 afterward,
even if the RN10 is already rooted?
**If the answer for my question above is yes, then (in RN10 condition of Unlocked Boot Loader, Rooted, Stock MIUI & Stock Recovery) ;
Would we still get official OTA Update from Xiaomi (and can download and install the update- as how it's like before rooting the phone)?
Thank you in advance
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
StaryMuz said:
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
Click to expand...
Click to collapse
Thanks again, (and maybe I will try your suggestion later).. but (sorry)... your reply doesn't answer my questions.
(I think my questions are very clear and probably very easy to be answered by someone who has experience/knowledge about it (like you?).. no?)
Forgive my nooby questions.
But I really want to know as much as I can (especially about the answer for some questions I have inside my head about the matter, like I asked above),.. before executing doing something about my phone.
oops... I'm sorry for double send
In the past I rooted Miui and then continued to get OTA updates. However, this cannot be confirmed for all versions of Miui. Each new update changes the phone software and so what worked before may not work today.
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
First of all, I would like to point out that Magisk (root) is a security risk. Without understanding the issues, the phone is more easily exploitable.
To install, just download the magisk file with the ZIP extension. In recovery, select the install option and select this file. Once installed, exit recovery and boot the system. Once the system boots, use magisk and complete the installation it requests.
Lolitary said:
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
Click to expand...
Click to collapse
the answer above is right ... but i would suggest to flash Orange Fox zip and then Magisk zip... to avoid problems
isn't there decrypt.zip for RN10?
How to decrypt this phone?
I usually did that along with rooting with my android phones before this.
Edit:
Update:
It's ok now I understand how, after watching this video.