Related
hello,
i just rooted and installed the recovery to my device.
Now i was trying to install the RomAur v4 and after this the Device Reboots.
Now i keep seeing the Sony Logo and a view seconds a blank screen what could i do to reset it or so ?
Edit: Flashtool says: For 2011 devices line, be sure you are not in MTP mode
Scarpall
Scarpall said:
hello,
i just rooted and installed the recovery to my device.
Now i was trying to install the RomAur v4 and after this the Device Reboots.
Now i keep seeing the Sony Logo and a view seconds a blank screen what could i do to reset it or so ?
Scarpall
Click to expand...
Click to collapse
Start Sony PC Companion on your PC select Support Zone >Start > Phone Software Update > Start > repair my phone.
This will reset your phone to stock firmware.
After that make sure you follow all the steps required of installing custom Rom exactly as mentioned.
Hope this helps
MotoXoom said:
Start Sony PC Companion on your PC select Support Zone >Start > Phone Software Update > Start > repair my phone.
This will reset your phone to stock firmware.
After that make sure you follow all the steps required of installing custom Rom exactly as mentioned.
Hope this helps
Click to expand...
Click to collapse
thanks for the quick reply.
i will test it and reply back here if it workes cause flashtool just finds it short and then says it is disconnected
Update: Its actually updateing and i hope that then all will work correctly
Update2: Best Regards it helped.
Can be closed if i dont find out how i can make it
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.
Hi there peeps!
My Xperia Z2 has gone into a bootloop, with no recovery, no boot logo, not registering ADB / fastboot drivers anymore.. BUT.. the buttons seems to work, so i may reboot it some different ways. The only indication of life it got, is the red light when booting.
Someone want to tag team with me to find the solution?
Donation will be gived to a working solution
Best regards!
There is no solution for this atm. The best way to fix it is to send it to the service center.
kimocoder said:
Hi there peeps!
My Xperia Z2 has gone into a bootloop, with no recovery, no boot logo, not registering ADB / fastboot drivers anymore.. BUT.. the buttons seems to work, so i may reboot it some different ways. The only indication of life it got, is the red light when booting.
Someone want to tag team with me to find the solution?
Donation will be gived to a working solution
Best regards!
Click to expand...
Click to collapse
I may have a solution. Red light usually means it cannot boot the kernel.
I have a simple fix. Follow this guide and make sure to download the firmware of your exact model and current software version number.
When you get to this step, on the right side don't check anything under 'WIPE', leave them blank. And under 'EXCLUDE', check everything except 'KERNEL'. Leave Kernel blank and the rest under exclude check them.
Proceed and press 'volume down' and connect the usb cable at the same time. Let the flash finish and boot the phone back up. Let me know how it goes.
Thanks! I'm trying your solution now, but i dont think it works... none of the drivers are either so. Give me some hours, i will walkthrough here
I can say, it is NEARLY dead i would think, but there must be a way somehow..
Yeah, this will not work.. It gets stuck on "HOLD THE VOLUME DOWN + PLUG THE CABLE" and both ADB and Fastboot are missing so.. It won't do anything there. Holding the Volume UP + Power reboots (that works for some reason). And the orange reboot button in the charging is working but nothing that will help me i think.
kimocoder said:
Yeah, this will not work.. It gets stuck on "HOLD THE VOLUME DOWN + PLUG THE CABLE" and both ADB and Fastboot are missing so.. It won't do anything there. Holding the Volume UP + Power reboots (that works for some reason). And the orange reboot button in the charging is working but nothing that will help me i think.
Click to expand...
Click to collapse
When the device is connected in flash mode (USB + Vol down), go to device manager and see if the device is there (may be called 'Xperia Z2" or "Unknown Device", right click and go to properties and update drivers to this. Update me how it goes. I had the EXACT same issue and it took me some time to resolve, by solving the drivers issue you can flash the kernel again without losing data.
If that doesn't work, install these drivers: http://forum.xda-developers.com/showthread.php?t=2588979
Hi!
When my went to Bootloop the only thing that woked was using sony's Pc recovery tool.
sony's Pc recovery tool
Hope this helps you out
Try Software repair on the new Xperria Companion
http://support.sonymobile.com/global-en/xperiaz2/tools/xperia-companion/
Both Sony Companion and Sony Emma are not registering the devices, but after fiddling around with VOLUME UP, VOLUME DOWN and lots of trying, at some point the device manager finds a unknown device. "hiredantispammer" may got the solution, but i will try all posted solutions right away! Post update soon
1. On "VOLUME DOWN + PLUG" the Device Manager refreshes, and the Z2 got the "red light" -- but Device Manager does not show any connected devices nor drivers needed.
2. The Sony Companion does not find the device either.
But.. i was reading about some Windows 10 driver problems, so i will try switch to Windows 7 x32 to ensure the drivers are working correctly.
Another thought.. Is it some way to put a "update.zip" on a sdcard for force installation of new kernel or anything?
Yeah, the solution is right. Hopefully Win 7 solves your driver issues. I had to reformat my laptop and install Win10 again because of driver issues when I have the exact same issue as you. Hope you get your phone working again!
Sent from my D6503 using XDA-Developers mobile app
And no, there's no other safe way to reflash the kernel. Even with an unlocked bootloader, you need fastboot drivers.
This worked for me.
Grab your original cable and make sure the phone is charged to st least 80%.
Start the pc companion and the repair program.
Hold the down key and connect to the computer.
In around 20 minutes the phone is repaired
Hope this helps.
It is important to use proper cable and not any old thing laying around. Mine would not connect until i got the original one.
Ah, charge your device fully. Reboot Windows 10 in safe mode and disable driver signature. Install device drivers. Use Sony PC companion or flashtool to fully reflash the right firmware for you device. You are still able to turn it off and on, so it should work if you do it right.
Best to first flash just the kernel and see if it boots, if it doesn't since you have the firmware files, flash everything and don't wipe data.
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse