Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me
Hello, I have an issue where I cannot go back to stock (I'm using Resurrection Remix Oreo), using Flashtools it says that: 'The bundle does not match the connected device', and after that it doesn't recognize the phone anymore, and I uninstalled and updated drivers, I tried using Emma too, but it didn't recognize it (No program does.) and also, I tried all USB ports and USB cables, and using Recovery will always end in a bootloop.
What do I do?
Thanks.
CGR911 said:
Hello, I have an issue where I cannot go back to stock (I'm using Resurrection Remix Oreo), using Flashtools it says that: 'The bundle does not match the connected device', and after that it doesn't recognize the phone anymore, and I uninstalled and updated drivers, I tried using Emma too, but it didn't recognize it (No program does.) and also, I tried all USB ports and USB cables, and using Recovery will always end in a bootloop.
What do I do?
Thanks.
Click to expand...
Click to collapse
you have two option:
Option 1: you can restore DRM keys and don't restart, go to Xperia Companion attache your phone via Cable and click software repair, and follow the instructions.
Option 2: Go to recovery and delete everything including system and data, and flash this " http://www.mediafire.com/download/d9...575_by_LaZ.zip " (credits are all to Laz, I do not own the rom nor created it, the link is taken from Laz's post) after that reboot, as soon it starts, go through the settings, when in, attach the phone to Xperia Companion, and click Software repair, follow instruction, and let the software go through, it will download the software and flash it, have some patience, when it finished it will say so, and you should be good to go. hope I helped, if you need more help let me know.
killerjoy01 said:
you have two option:
Option 1: you can restore DRM keys and don't restart, go to Xperia Companion attache your phone via Cable and click software repair, and follow the instructions.
Option 2: Go to recovery and delete everything including system and data, and flash this " http://www.mediafire.com/download/d9...575_by_LaZ.zip " (credits are all to Laz, I do not own the rom nor created it, the link is taken from Laz's post) after that reboot, as soon it starts, go through the settings, when in, attach the phone to Xperia Companion, and click Software repair, follow instruction, and let the software go through, it will download the software and flash it, have some patience, when it finished it will say so, and you should be good to go. hope I helped, if you need more help let me know.
Click to expand...
Click to collapse
So, for some reason, after rebooting my PC like 3 times I got it to work and flashed it through Emma, now I'm back to stock.
Thanks for the cooperation, best regards.
Please Help me, I desperately need it...
My Custom TWRP Recovery is gone and so is my OS. I tried to update my Custom Recovery but i ended up bricking my device. I flashed a TWRP image to the Boot and the recovery. As soon as I restarted my phone I knew I made a mistake .
I can't afford a new phone. My phone is a Xiaomi Redmi Note 3 and i NEED help fixing it. I CANNOT AFFORD A NEW PHONE. This was my favorite phone. It was also the first I've ever modified. I will give all necessary information
Easy fix
Hi
I can help you fix your device
First method: Download and install Emma. It is a software to repair your phone
After that plug your phone to your computer
Open Emma. There will be a option USB 1 with your phone name
Click it and on the right side select software repair
Wait for some time after it finishes your phone will power on
If it helps click the Thanks Button
software
can you give me the link to the software
muhammad42620 said:
Hi
I can help you fix your device
First method: Download and install Emma. It is a software to repair your phone
After that plug your phone to your computer
Open Emma. There will be a option USB 1 with your phone name
Click it and on the right side select software repair
Wait for some time after it finishes your phone will power on
If it helps click the Thanks Button
Click to expand...
Click to collapse
hey can you tell me how to get this software? Is it compatible with xiaomi?
Emma does not work