Related
Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.
Hi guys im proud to present you my newest work for Galaxy S6 and S6Edge
THE KALI NETHUNTER
Nethunter is The Kali Linux Android Rom addon that allows you to perform various attacks
HOW TO INSTALL NETHUNTER ?
Just flash the zip over your existing Stock Rom installation it will add all the Nethunter stuff to it
DOWNLOADS
ROM PATCH
CREDITS
ME (J0SH1X)
Noxxxious (for his kernel which i used as base)
Kali dev team
BUGSYou tell me
Can you explaine what is this ?
Sent from my SM-G920F using Tapatalk
tazaga said:
Can you explaine what is this ?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
you know kali linux ?
that linux to hack stuff and so network attacks thats me mobile variant of it
Thanks for this! I've been waiting for a while for a Nethunter release for my S6 ill give it a try and post the bugs i encounter!
Do we need particular rom to run it? Or this zip can be flashed on every rom?
erghetto said:
Do we need particular rom to run it? Or this zip can be flashed on every rom?
Click to expand...
Click to collapse
your rom will work i guess because your using the kernel i used as base
J0SH1X said:
your rom will work i guess because your using the kernel i used as base
Click to expand...
Click to collapse
My signature is much outdated xD now i am on tn rom with tn kernel (N5 port, so i suppose it won't work).
Thanks anyway ^^
Finally someone made it. Thank you VERY MUCH!
can u tell us plz what it gives ? what options ? ty
im coming from griffin rom with nog kernel
morad23 said:
can u tell us plz what it gives ? what options ? ty
im coming from griffin rom with nog kernel
Click to expand...
Click to collapse
This isn't a rom, it just gives you access to kali nethunter tools, these tools are used to test network security if that is what you wish to do, it can also allow you to attack networks, you'll probably need to learn how to use this,, Google kali nethunter to learn more
Hi, I installed the kali and the installation worked well. However, I can´t open the terminal and some of the features that use the terminal also dont work. e.g: Wifite.
PS: I tested it in two different roms: Nano rom and Stock rom and the device is a SM-G920F
@erghetto: what version of tn rom are u using. Just asking, because I'm downloading it and wondering what version is better. 5,7-5,9 or 5,1-5,2?
Will it work on TouchWiz based roms?
JeOZ said:
Will it work on TouchWiz based roms?
Click to expand...
Click to collapse
Yes it will work on stock roms
Is there a way for it to make phone bootloop if installed on a "wrong" kernel?
I want to test it on the XstreSto Lite ROM with the N0G33K kernel but I'm kind of worried about failing it because of the kernel
_Nexus8_ said:
Is there a way for it to make phone bootloop if installed on a "wrong" kernel?
I want to test it on the XstreSto Lite ROM with the N0G33K kernel but I'm kind of worried about failing it because of the kernel
Click to expand...
Click to collapse
Speaking from experience, you can brick your device in many different ways toying around with Nethunter installations. I can't speak for the OP's post but I just finished porting Nethunter to the SM-T580 (Tab A) and I made use of the back-ups I had on hand a few times. I wouldn't advise messing around with this unless you are able to back up your boot (kernel), recovery, system, and data and store them safely off your device. and are confident in troubleshooting bootloops. As long as you are oem unlocked and have a factory ota to restore from, its pretty hard to hard brick these days.
REtails said:
Speaking from experience, you can brick your device in many different ways toying around with Nethunter installations. I can't speak for the OP's post but I just finished porting Nethunter to the SM-T580 (Tab A) and I made use of the back-ups I had on hand a few times. I wouldn't advise messing around with this unless you are able to back up your boot (kernel), recovery, system, and data and store them safely off your device. and are confident in troubleshooting bootloops. As long as you are oem unlocked and have a factory ota to restore from, its pretty hard to hard brick these days.
Click to expand...
Click to collapse
Okay, I'm going to backup all my data then try to flash the ZIP and if it bricks I'll flash a factory ROM
I keep you updated
Does this works on any grace ux rom?
I got this installed but terminal stop working when I try any command :/
Edit : nevermind, I got this working after a reboot
Is there a s6 edge plus version?
Hi, So i am new to the whole rooting thing i have a Samsung Galaxy J530F and i want to make the UI look better and i have looked everywhere online and tried downloading substratum but that is useless because you have to pay for it.
Can anyone please tell me how to get themes?
I recommended Substratum
They will use this
Nougat (RRO): Requires root, exposures unsupported, not all themes compatible
as the theme engine!
ALWAYS PREPARED SUBSTRATUM RECOVERY.ZIP Incase you got bootloop!
Just flash substratum recovery (aka remove overlay & etc).zip in TWRP!
Peak.Krittin said:
I recommended Substratum
They will use this
Nougat (RRO): Requires root, exposures unsupported, not all themes compatible
as the theme engine!
ALWAYS PREPARED SUBSTRATUM RECOVERY.ZIP Incase you got bootloop!
Just flash substratum recovery (aka remove overlay & etc).zip in TWRP!
Click to expand...
Click to collapse
Hi thanks for your reply,
Is there a way to get substratum for free? I have looked here on XDA and elsewhere on the internet but can't seem to find it, i install the normal substratum App from the playstore but it then asks me to pay for it.
SkyTec12 said:
Hi thanks for your reply,
Is there a way to get substratum for free? I have looked here on XDA and elsewhere on the internet but can't seem to find it, i install the normal substratum App from the playstore but it then asks me to pay for it.
Click to expand...
Click to collapse
No Substratum is free.
i hve been looking for a while any way to install viper4android in my realme 3 pro..so many method tried but failed..always end with no driver installed...running latest firmware c04 and magisk..hope anyone can help me
azharismvk said:
i hve been looking for a while any way to install viper4android in my realme 3 pro..so many method tried but failed..always end with no driver installed...running latest firmware c04 and magisk..hope anyone can help me
Click to expand...
Click to collapse
Hi, i am on Havoc 3.4 and use magisk's v4a legacy module. It works for me. Not sure if color os supports its but you could try it if you haven't.
Good luck.
kaleavi said:
Hi, i am on Havoc 3.4 and use magisk's v4a legacy module. It works for me. Not sure if color os supports its but you could try it if you haven't.
Good luck.
Click to expand...
Click to collapse
well forgot to mention that i already flash 2 custom rom before aex and lineage..both working viper perfectly but i feel more comfort using rooted realme btw thanks so much and i never try havoc for realme and will give a try soon..thanks again
This thread has been discontinued. The developer of the mod i.e. @Jaiii himself has registered on xda and has started his own thread on the DSB that he'll be maintaining. Here is the link below. (The project is not abandoned, it has just moved.)
https://forum.xda-developers.com/poco-f1/themes/dual-status-bar-dsb-mods-poco-f1-left-t4195641
Why hide the notch when we can use the entire screen real estate!. :victory:
DSB i.e. Dual Status Bar mod is available for all custom roms.
Both sides of the notch are well used.
Its constantly updating as we speak. @Jaiii is the owner of the work, so all the credit goes to him.
We hv also created a magisk modules (available only on telegram channel).
So far we have created twrp flashable files for below custom roms:
Evo x
PE Plus
CrDroid
PA - Paranoid Android (not by us but the credit goes to the respective owner)
Nusantara (only left side DSB)
Lineage OS official
In case you want to return to stock status bar just flash Disabler (see attachment) or you can also dirty flash your rom.
:highfive:
rajeshkoshti said:
DSB i.e. dual status bar mod is available for all custom roms. Both sides of the botch are well used.
Its constantly updating as we speak on MOD EDIT: Telegram link removed, please read the STICKY!
Hope this helps. Why hide the notch when we can use the entire screen real estate!
Enjoy our poco f1.
Click to expand...
Click to collapse
Telegram link removed. Please post some legit links.
rajeshkoshti said:
DSB i.e. dual status bar mod is available for all custom roms. Both sides of the botch are well used.
Its constantly updating as we speak on MOD EDIT: Telegram link removed, please read the STICKY!
Hope this helps. Why hide the notch when we can use the entire screen real estate!
Enjoy our poco f1.
Click to expand...
Click to collapse
Awesome bro please add links:good:
Can we request dsb for rom
PROFESS0R said:
Can we request dsb for rom
Click to expand...
Click to collapse
Sure u can, we r expanding our support for other roms as well.
rajeshkoshti said:
Sure u can, we r expanding our support for other roms as well.
Click to expand...
Click to collapse
Please make a dsb for miui eu 12.0.1 poco f1
How to Uninstall?
Reflash ROM?
Works fine but my display got very dark even at 100% How to fix that?
Brilliant mod. Please don't stop development.
Is this mod requires root?
No
PROFESS0R said:
Please make a dsb for miui eu 12.0.1 poco f1
Click to expand...
Click to collapse
our devs are working on many different roms, I guess we'll let u know when its ready for MIUI 12.0, but mostly it will take time.
ferrari990 said:
How to Uninstall?
Reflash ROM?
Click to expand...
Click to collapse
Yes, just dirty flash the rom.
byggmarkus said:
Works fine but my display got very dark even at 100% How to fix that?
Click to expand...
Click to collapse
which rom are u using? because we have tested the mod under different circumstances and none of us faced any issues regarding display.
Skazzy3 said:
Brilliant mod. Please don't stop development.
Click to expand...
Click to collapse
Let's hope our devs wont get offended with any blunt remarks or comments and stop development of the mod. Thats why we dont let our devs directly communicate with end users.
Haikosan said:
Is this mod requires root?
Click to expand...
Click to collapse
There are two options either u can use magisk module (requires root) or u can use twrp flashable file (attachment).
rajeshkoshti said:
our devs are working on many different roms, I guess we'll let u know when its ready for MIUI 12.0, but mostly it will take time.
Yes, just dirty flash the rom.
which rom are u using? because we have tested the mod under different circumstances and none of us faced any issues regarding display.
Let's hope our devs wont get offended with any blunt remarks or comments and stop development of the mod. Thats why we dont let our devs directly communicate with end users.
There are two options either u can use magisk module (requires root) or u can use twrp flashable file (attachment).
Click to expand...
Click to collapse
I use latest Pixel experience +. Outside I can't see the display of the sun is strong [emoji17]
Edit: I think the problem was latest silvercore kernel 6.9
A Version for pocophone f1 and miui12 is planed?
Now added the mod for CrDroid.
im interested in a version for Paranoid android.. but without the odwnload speed
ferrari990 said:
How to Uninstall?
Reflash ROM?
Click to expand...
Click to collapse
Error 7
Pe+ latest. Twrp 3.4.0
???
Edit: incremental packade didnt work but full build did.
Thanks for the mod
If you can make it compatible with Lineage 17 please
And as a recommendation, i think a magisk module would be better solution
Thank you very much
In pe+, it does not work when i am try to install with magisk.
Please Havoc Rom