Help my redmi 6a is not booting! - Xiaomi Redmi 6A Questions & Answers

Chirag91 said:
Device isn't booting although it notification light lits up when charging.
Click to expand...
Click to collapse
HELP ME PLEASE!
I can't do anything on my redmi 6a,
- I can't boot to recovery
- I can't boot to Fastboot
- Its just black screen,
- My pc won't read the phone (It reads it but only 1 sec when I press the volume up)
- I use the 1 sec chance to flash with the spflash tool however, I get this error
[ ERROR: STATUS_BROM_CMD_FAIL (0xC0060005) ]
Please help me reply asap please...

Same problem!

Related

[Q] PLEASE HELP hard bricked my sm-g357fz

An apk called cleveriors cwm installer has made my phone unable to access either dmode or recovery it vibrates, flashes dark blue on half the screen for a second then repeats in a loop, attactchin usb without battery makes it vibrate but no reading from pc, please help this has really upset me
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
PLEASE HELP bricked my samsung sm-g357fz
Hello all, I believe that my phone is bricked or half ; does not turn on, is as dead but sometimes comes on the screen and vibrates when I connect via USB and does not enter into download mode flasearlo , moreover when it enters in recovery mode (when you want to) appears in the snowman white , lying on the ground and a red triangle above, also displays the text "without commands". It is new and if is posible helpme with any solution i would be very grateful. Thanks in advance, Salutations
hisham_waleed_karam said:
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
Click to expand...
Click to collapse
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
link of frimwares : http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
guide : look at this http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/

Redmi 3s download mode bug

Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
mustek36 said:
Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
Click to expand...
Click to collapse
i am a redmi 3 pro user so i dont know how you can go to edl mode.google on how to boot redmi 3s in edl mode then you can flash the rom.
can you boot on fastboot mode ?
So I check this tut: xiaomitips.com/guide/how-to-put-redmi-3-into-edl-mode/
1st method doesn't work. Phone restart and starts system normally.
2nd don't work on win 10 64bit,.
3rd - nothing happens. Phone shows battery charging. Nothing more.
BUT on the windows 7 64 bit second method works correctly

My Redmi 5 Plus Dead

Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
soomat said:
Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
Click to expand...
Click to collapse
Well, it´s difficult to know exactly what cause this sudden dead. When I receive myy device from AliExpress I noted that bootloader was unlocked and when I try to flash through miflash tool (it works with device in fastboot mode) it says permission denied, it means that something was wrong in this unlock-procedure; I don´t know if you purchased in this conditions but this is an alert signal.
I could to enter in fastboot and how was unlocked I flashed TWRP and used a custom rom, but you know if it is a similar case that could help you.
First of all check your battery charge and be sure that you are pressing correctly vol down + pwr at same time without realease any till bunny appears but if you have a locked bootloader you can´t use miflash tool. Also you can try to enter in fastboot at same time that you connecting to charger press vol down.
There is a special mode EDL (download for Xiaomi) that is used to flash a rom without unlock bootloader, of course this method is hidden for any user.
You can Google these two options to enter to EDL mode; Normal method is pressing the three buttons at same time that you connect device to pc till vibrates then release but not always works that.
- Deep cable EDL
- Test Point (you need to open the cover)
Then if succesfull you have to download your fastboot rom image, drivers and also miphone tool (if not the same that miflash tool) this tool works in download mode to flash Xiaomi devices

[Kate] Black screen with red dot blinking and impossible to boot

Hello everyone,
I'm here because I tried so much guides to unbrick my Xiaomi Redmi Note 3 pro SE without any sort of good result...
Mine is stuck on EDL mode (Qualcomm HS-USB QDLoader 9008 thanks to a homemade deep cable).
I can't boot with the power button and I don't know why, it looks like the button doesn't work anymore .
Sometimes, I can boot on fastboot mode by plugging the cable and pressing VOL- and sometimes it doesn't work
Can someone help me to ger rid of this problem please?
Thanks in advance guys
Do not hesitate to ask me more informations, I'll try to give you an answer.
Edit : I just tried this guide en.miui(dot)com/thread-235865-1-1.html and the flash was succesful.
I have now fully access to fastboot mode.
But now my phone keep showing Mi logo and rebooting. Any idea ?
Edit2 : i've done this one now xiaomitips(dot)com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution
But now my phone is showing Mi logo and vibrating then rebooting...
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide
Try it
Click to expand...
Click to collapse
Thanks for the response, i'll try your guide
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Rtxx said:
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Click to expand...
Click to collapse
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Black_Stark said:
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Click to expand...
Click to collapse
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Click to expand...
Click to collapse
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
U can unplug cable. No harm.
Press and hold together vol up + power. And release both immediately with vibration. U will boot into twrp.
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
Press power and volume up while still plugging after
flashing done about 10 second ?
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Rtxx said:
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Click to expand...
Click to collapse
Sad ?
Did you check hardware yet or emmc ?
Leftrand said:
Sad
Did you check hardware yet or emmc ?
Click to expand...
Click to collapse
I don't know what you mean by checking hardware, eveything was working well until I failed my flash and then my phone was bricked.

HELP!!

bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
LordYama said:
bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
Click to expand...
Click to collapse
How did you run into this? Did you try to flash a ROM that might have not been compatible with Realme 6?
LordYama said:
bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
Click to expand...
Click to collapse
Use the unbrick guide
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com

Categories

Resources