I don't know what happen, suddenly side screen my pocophone turn white
Can you give guy me a solution? please
besides having to replace the screen, because the cost is very expensive for me
And now the side of screen turning green
Sorry my english so bad
Screen turning white and green almost always means a faulty display or a faulty/loose ribbon connector.
Nothing you can do other than sending it to repair. If it's a ribbon cable fault, maybe someone can refurbish it for a lesser cost. But since ribbon cable and screen come in one piece, most repair shops would ask you to replace the entire screen.
Hope it's just a loose ribbon cable. Did you bump the phone somewhere? Or try to open it?
Related
So I cracked my LCD screen, bought a replacement, opened up the phone w/ little incident (man they really do cram a lot in there!) and I powered it on.....
the screen is just white, if I fiddle with the connection at where the LCD connects into what I believe is the digitizer I can kind of see a keypad button layout.
What do these symptoms describe and does anyone have a link to the service manual?
Thanks in advance for your time.
I had to replace the LCD on a wizard so here my experience... Make sure the two data ribbons are inserted securely. Also, before you power on, plug your hermes into your computer (assuming your computer is on and logged in as an admin) via USB (this sounds weird but I had to do this for some reason....) and then turn on the wizard.
If you still have a problem, you may have damaged something more than the screen.
Good luck.
Ok I will give plugging it in a shot.
Before you plugged it in what did it do when you powered it on?
anyone else have any input on what the issue could be?
It could be wrong LCD. There are two types of LCD for hermes/wizard with same connector but they are different. One is with gold flex cable, the other is with black flex cable. First one is most popular on wizards, the other on hermes. Check what was the color of your previous lcd flex cable and the new one.
Instructions
Can anyone post the instructions on how to take the lcd apart ?
I have gotten this far
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
I'm a bit afraid to go on without instructions
Here is the lcd I got
http://cnn.cn/shop/8525tytn-touch-p-87.html
I've made sure I purchased the correct replacement for my screen. Followed a guide and got it all hooked up. The phone powers on but I get a white screen.
Anyone have any guesses as to what could be causing this?
Your help would be much appreciated as I would hate buying another phone.
Incorrect ribbon cable seat.
Take it apart and make sure that both the ribbon cable on the side, and the bottom with the tiny black screws are properly seated.
Yea i have tried all of that....but I just tried tinkering with it again and i was able to get a partial picture by changing the back pressure of where the LCD ribbon plugs into the other ribbon assembly the buttons are connected to.
So I am guessing there needs to be a super secure conenction at this point. Problem is...the black latch that holds the cable from the LCD to the other ribbon is broke so i cant make it pinch the cable.
Anyone know where I can find a replacement for this other than buying a broken hemes for parts?
You need the flex cable connection, and there is a site in canada that has them.
www.cnn.cn
Yea I checked that out....I don't see it, do you?
teknics said:
You need the flex cable connection, and there is a site in canada that has them.
www.cnn.cn
Click to expand...
Click to collapse
.cn is china not canada.
Good point - ca = canada
hi, i replaced the digitizer on my hd2 (uk) and now after screwing it all together, it wont boot, when i plug in the charger, the red charging light lights up, but nothing else.
it worked before i changed it, do you think i broke something inside? or fitted it incorrectly?
i mean would it not start if it was fitted incorrectly?
its not dead if the charge light lights up right?
thanks
also have the same problem...please help
Did you plug the motherboard in? I recently had an issue with my mini usb (broke off the motherboard), took it a part and tried to solider it back on (with no success) put it all back together and it would not turn on. Thankfully I didn't put it completely back together and noticed I didn't connect the little ribbon cable to the motherboard. Also, in the process somehow now my digitizer doesn't work fubar!
just fitted a new screen to my dell streak , when i turn it on i get the dell logo screen then a black screen and when that fades and i touch any button all i get is a screen full of multi coloured pixels help me i need my dell
message reply
i forgot to mention i email the guy in china i bought it from and this was his reply, i hope some one can make sense of it.
Tks very much for your mail and understand.
In this case,you need not the worry,this is normal,you can put it in the cable jack wipe clean with a pencil,and then install your screen.
Because of you know,they have a lot of black jack cable thing.you can try to do so.is thisi ok?
Locking Ribbon Cable Connectors
Don't know that this is the answer to your problem, but when I replaced my screen it would not respond to touch. I found that there are connector locks on the digitizer ribbon connector and on the side button ribbon connector. Once I flipped these locks down on the ribbon cables the screen responded to touch. It's something to check at least. Look at this discussion, http://forum.pocketables.net/showthread.php?t=9382&highlight=replacement , and you will get a good set of directions and some excellent large pictures to help you. Good luck!
good afternoon,
My xperia mini pro sk17a has a black screen.
Prior to this occurrence, I had a bad flex ribbon cable to the sliding keyboard. Screen would go black and come back with sliding keyboard motion. Opened the phone and found that the cable was torn. Decided to buy a replacement flex cable and installed it. Everything looked okay but...
Once I put the phone back together, no screen at all. If I turn the phone on, there is a very very faint amount of light present (you can only see this in the dark). The phone does boot, and the notification light will flash indicating new messages. I can call the phone and it will ring.
Hoping that this might be some sort of software reset, I tried flashing with the SUS software. No help, phone still behaves as described above. I'm guessing I need a new screen (maybe damaged it somehow taking the phone apart?), but has anyone gone through this and know of a solution other than more new hardware?
Thank you in advance for any help or feedback.
I think new flex cable is also damaged. You should check flex cable in another SK17.