Could someone post a proper and clean instructions how to recompile ChromeOS/ChromiumOS kernel?
Could someone explain the difference between Regular Upstream Linux Distro kernel and the one in Chrome(ium)OS kernel?
Thank you.
For the last 48 hours I am trying to build a working kernel for my Dell Chromebook (Codename WOLF). Using the ChromiumOS project documentation and crouton wiki.
I've done maybe 20 builds, and all of them are freezing on "Booting Linux Kernel".
However I've no problems booting a kernel from any other Distro (Ubuntu/ChromimOS/ChromeOS/CentOS).
I'll be glad as well if I'm able to rebuild chromiumos kernel as a last resort.
My goal is to build a working kernel with CIFS / SquashFS with XZ+LZO extensions / OverlayFS / DM - Snapshot / VirtualBox kernel modules and support for some proprietary Peripheral devices.
Perhaps I am doing something wrong. But have no idea what exactly.
Related
I've had a search and a look around but can't see anything specific enough to answer this.
I have read that the SGS2 uses the new BCM4330 chipset for it's WiFi-N support.
It looks to me that for existing kernels they are using either the existing kernel support or possibly the b43 driver.
I need to find out, and while I have compiled custom kernels in nix in the past, I have never done so in Android, so I'm a little out of my comfort zone here.
I want to compile a kernel where the WiFI driver will support monitor mode, ideally it would be the CM7 kernel with just this extra functionality added, however a number of the tools that I would use to identify the existing configuration do not seem to be available in the standard CM7 build (lspci being one).
I don't want to frack around too much without having read up first so could anyone point me at a good guide for creating my own Android Kernel, even better if the guide was specific to the CM7 version.
Lastly I mostly run a Fedora environment, however the bits I have read seem to suggest a number of tools are only available in a Ubuntu guise (heimdall springs to mind and while I'm sure it's possible to recreate it for Fedora I'm trying to reduce the number of dependencies I'll have to recreate as much as possible). Therefore can I get some advice regarding the least complicated way to generate an Android build environment in Linux.
Thanks
For kernel compilation on android, you can check the several repositories there are for the several kernels. Depending on each kernel/repository/user, you can find a predefined .config inside them, so you can get the basic configuration to compile the kernel, don't know if CM7 has it in its repository...
As for the enviorment, I haven't tried compiling a kernel, but I did compile some ROM on Gentoo Linux, so I suppose it could also be done in Fedora without many problems. The main thing about using Ubuntu is that is very extended, so they're using it as main Linux base, but that doesn't mean it can't be done in other linux distros. You can check CM7 wiki for building from source to install the required packages for your enviorment. In my case I cross checked the Ubuntu packages with Gentoo to install gentoo's version of that packages/tools to be able to compile without problems.
Also in the case of building kernels, you need a toolchain to be able to compile, but there are several webs/tutorials with info on how to use that.
EDIT: You have a complete tutorial for CM7 in their wiki with the needed packages for both Debian and Red Hat based distributions...
Very useful, thanks for the info.
Very useful info.
Hi,
I'm interested in compiling a custom kernel to support wifi monitor mode, but I read in a previous post that it can be a hardware limitation which makes it impossible to use monitor mode. Can anyone confirm that? Maybe a statement/answer from Broadcom?
I'm just asking it because I don't want to start playing with kernel compilation and driver hacking if it can't be done because of some missing code on the chipset or something.
Thanks.
kepten said:
Can anyone confirm that? Maybe a statement/answer from Broadcom?
Click to expand...
Click to collapse
I doubt Broadcom will answer that, but you can try to search the chipset info in Broadcom's web and see if its supported. Also you can check kernel modules if they can compile against that version.
AzureusPT said:
I doubt Broadcom will answer that, but you can try to search the chipset info in Broadcom's web and see if its supported. Also you can check kernel modules if they can compile against that version.
Click to expand...
Click to collapse
Well, Broadcom's website says nothing about monitor mode but I've found a driver (https:// github.com/cyanogen/galaxy-2636/blob/ics/drivers/net/wireless/bcm4330/src/include/wlioctl.h#L1153) which at least mentions it. This is for Galaxy Tab 10.1 which has the same chipset so maybe someone with a Tab 10.1 could verify if monitor mode works with that kernel/driver? ??
I am needing to make a kernel for a certain device. There aren't any source codes available for that device but there are for multiple clones out there. I am running Linux Mint Debian edition and i cant find a guide for compiling a kernel on debian. If someone could please guide me to one I would be most glad!
Droid Premium said:
I am needing to make a kernel for a certain device. There aren't any source codes available for that device but there are for multiple clones out there. I am running Linux Mint Debian edition and i cant find a guide for compiling a kernel on debian. If someone could please guide me to one I would be most glad!
Click to expand...
Click to collapse
This is the main and most active Guide for Kernel compiling out here:
[Tutorial] Building Your First Kernel
Even if its specified for Ubuntu, it technically should work on any Linux variants.
Is is possible to use other Linux kernels with this? My Acer C720p has no trackpad support in Remix OS, and most Linux distros, but the Gallium OS (Ubuntu based) kernel works fine for this.
I tried to use a Marshmallow kernel on the ARM version and all it did was boot loop.
Kernel code is here:
https://github.com/JideTechnology/remixos-kernel/tree/jide_x86_marshmallow_kernel-4.4/kernel
I looks is possible see this thread
If you succeed please keep us posted I am also interested. ( I got an error during boot CPU family not supported ).
Hello, I'm newbie dev trying to build CM13 for Lenovo Phab plus.
I think I'm almost finished with device and vendor, but I cannot figure it out what to do with kernel.
The circumstance is,
I have a stock kernel source which runs in 5.1.1 LP, with version of 3.10.49.
What I want is to make kernel compatible with 6.0.1.
I already know that linux kernel version doesn't have to be exactly same with new Android OS versions and I can just make a few patches in order to run kernel in higher OS.
So I googled and studied(?) for 2-3weeks, but got not many useful informations and I still cannot figure out where to find required patches for 6.0.1 .
So here's what I am not sure about.
1. I found that I can either upstream, merge, cherry-pick kernel sources from higher OS. For instance, if I merge kernel patches (starting from 3.10.50 to 3.18 step by step) and check if the kernel compiles successfully, is this a right thing to do? I am confused whether merging or cherry-picking is required for my situation.
2. I see lots of commits when comparing with other kernel sources in github. How do you find those kinds of patches? -> just keep compiling kernel and if error comes out->search->commit
Always this pattern goes again and again till boot properly?
3. i'm quite curious with backports. What i know is that "backports" are the files which is compatible for lower version kernels. For example, backported audio driver originally based on 4.9 can be used in kernels with version below 4.9. Is it right?
4. If there is an useful links, anything could be helped a lot.
THANKS IN ADVANCE.
So, I recently got a ASUS Zenfone 4 Selfie Pro, the phone is stuck on android 7.1 and doesn't have any roms, nothing, just TWRP. So I'm on a journey trying to build stuff for this device from the ground up, I already made a device tree based on Zenfone 3 (which has the same SoC) and I tried to build lineage/cyanogenmod 14.1 for it and got a lot of kernel errors, so I went to try to compile the kernel from the source ASUS gave on their website and uploaded it to my github. In this past 3 days was able to fix and workaround some of the errors I got while building, but now I'm stuck on this one: https://hastebin.com/iqisuzegeg.coffeescript | any help would be greatly apreciated .
For easier access to the kernel source I uploaded it to my github and made some fixes/workarounds for some errors: https://github.com/2003Frost/android_kernel_asus_Z01M_stock
I'm using Linaro 7.5.0 as arm64 toolchain.
I'm using Zorin OS 15.2 as OS.
If any more information is needed I'll be glad to give out.
0
Seppppx said:
Hmm. There is probably no definition for 'drivers/platform' and 'drivers/platform/msm' . But there is a reference (probably). Also have you tried to build the kernel with the defconfig "the manual way". If there is something wrong with the kernel I have almost no way of helping you because I'm not a real developer.
EDIT : There is a kernel source for your phone that on a developer's github https://github.com/shakalaca/android_kernel_asus_zd552kl . That is also the person who is the maintainer for official twrp. He has some large commits on the kernel so his kernel should build.
Click to expand...
Click to collapse
I already tried his kernel and got the same exact error :/
I didn't understand fully what you said with "the manual way" but I'm trying to compile the kernel outside the rom build environment, by using my device's defconfig and compiling with linaro.
0
Seppppx said:
By the manual way I mean the with the defconfig. Also I made a pull request to your Device Tree (adds persist partition and Shakalaca's kernel).
Also if you're trying to build with defconfig there is a tutorial by google. https://source.android.com/setup/build/building-kernels-deprecated .
After that you will have to put it to the boot image. Another guide for that. https://source.android.com/setup/build/building-kernels#embedding-into-Android .
Edit : Isn't the Android kernel build with the defconfig when you run a source build? I think it actually builds the kernel when you build android so you don't build the kernel separately.
Click to expand...
Click to collapse
I accepted your pull request. Yes when you build a rom from source it also compiles the kernel, but I wasn't able to build the rom because it gave me kernel errors, so I went and started compiling separately because it's easier to fix kernel errors like this.
I am not using Google's tutorial, I'm following one that has almost the same steps and I'm using the same toolchain.
0
Seppppx said:
By toolchain you mean tools that you need to compile a kernel? Why doesn't one just install the tools needed to compile a kernel source.
The guide I linked doesn't specify any toolchain (thus idk if I need one). It also doesn't have anything to do with build.sh script used to compile a kernel. Instead it uses the defconfig. The commands are actually very simple.
cd kernel-source_code
export ARCH=arm64
export CROSS_COMPILE=aarch64-linux-android-
make ZD552KL-Phoenix_defconfig
make
Also have you tried to build another kernel that you are sure builds? If another kernel builds. The issues have to do something with the kernel itself. If it does not it's most likely something else.
Click to expand...
Click to collapse
To compile a kernel from source you need something a cross compiler or toolchain in my case I'm actually using the exact same commands you commented with linaro toolchain/cross compiler (aarch64-linux-android). As far as I know you need that to compile a kernel and I don't think the toolchain is the problem but the kernel itself. I can try another kernel later to see if it compiles.
0
Seppppx said:
Okay thanks!
If you manage to compile the kernel for your device make sure to mention/quote me. I would like to contribute. I'm on my way to make another pull request (now about cameras).
Click to expand...
Click to collapse
If you want to talk to me more quickly you can message me on telegram https://t.me/Frost_2003
0