Like the title, my Poco F1 got this issue since last week, just right when I want to flash clean from PE+ to PE11 beta, pendrive OTG doesn't work or no way to use usb connection when connected to PC(just charging). I've tried Wipe All Data of PE+, flashed back to stock recovery rom(via twrp, and I forgot to reflash Twrp and now I'm staying forever on stock until fixed)
Pendrive OTG, PC connection, Headset Type C, QuickCharge simply don't work.
Meanwhile, Keyboard and Mouse via OTG work normally.
Is the USB connector or USB board the one at fault? Or is the mainboard/QCOM chip at fault?
Related
Hi help me. :crying:
I have installed CM9 stable. My phone is work only with charger. I am sure that's not problem with USB port, because only usb mode works if i go in options -> storage -> usb connection if i change from mass storage to MTP or PTP several times when in phone appears on the notification bar information about connection. It is temporary fix until i reconnect it. I also tried in CWM recovery and nothing happens likewise fastboot or flashmode and it is the same, only led is lightening. Nothing help like restoring backup from recovery. It can be caused by OTG USB modules ? How can i back to stock rom ? (I tried PC Companion and SEUS). I think something is wrong with usb modules in the phone (not Windows or PC, etc.). It is a option to flash kernel or rom without using PC? What can i do with that ? Please help me
Install all drivers for all devices/modes from flashtool (installation folder) -> drivers. Then try again
Otherwise reinstall or update PC Companion or Sony Update Service, they install some drivers, too. Or you try another PC :good:
I'm sorry but it's impossible to flash a kernel without your PC...
Sent from my Nexus 7 running Android 4.2.2
Ok, thanks for the advice. I am gonna try this, but how i should install drivers if nothing appears in the device manager in PC. Only what i see it is a called like „sony sa0102 adb interface" and only if i switching between usb modes in phone settings. Maybe the issue is in the phone like i write earlier about this. The smartphone dont detect usb cable present or he doesnt switching a driver for the connecting. Thanks again for the reply.
Sure its not the problem of the cable?
Don't forget to hit thanks
It can't be problem with cable because very rarely works in while when i changing usb modes in settings phone. But, thanks i will try on another cable. My kernel is from CM9 stable in zip file, but on this kernel only will work CM9 or nothing else like ROMs based on the cyanogenmod for example CM10 or AOKP ? I, one day connect usb otg (host) cable to phone and charger. This cable had 2 inputs male but also i have converter usb (female-female). And only work mouse and the keyboard (without usb flash disks, drives, etc.). I would be grateful for the answer my question. Thanks.
The USB port of my Redmi Note 3 (SD) isn't working. I am only able to charge my device via the USB port. When I connect it to PC, the menu (to choose Charging/MTP/.....) doesn't show and my PC shows "USB not recognized". I even can't connect my flash drive via OTG cable. I also tried trying to connect a mouse but it doesn't work.
The problem doesn't end here. Sometimes, the menu shows up occassionally when I connect the phone to PC and then it works absolutely fine. I can transfer files to the phone and even the mouse works. But on reboot, I lose it again.
I tried clean flashing the ROM too but it worked only once.
PS: I'm using Resurrection Remix 2017-03-05 build with Radon kernel.
Don't know if it's the same that happened to me a while back, but I solved it by carefully cleaning the USB port with the SIM extractor (can't remember the name). Hope it works for you too.
How to get my phone to recognize an attached flash drive. Currently tried a USB-C to USB 3.0 female connector to attach a 3.0 flash drive. System does not recognize the flash drive.
Never had this issue with a rooted phone but with the stock OS, just can not get it to work.
Tried OTG USB Managers and they report the system is fine for a flash drive to be seen. It has not worked
So please, will someone explain how I can get this thing to work.
______________________________________________________________________________________________________
The USB connector works as it should.l
My problem was that I have the phone attached to a ZeroLemon battery pack and as of yet, the exterior battery pack connector is the issue.
Have written to ZeroLmon to see if they have a fix for this or is just out of luck when trying to connect other than charging the phone.
Hi
I do not know what to do more.
Symptom: Connect usb cable to pc, no reaction of pc, only charging. Windows 10
Reinstall all the driver several time,
Try maybe 10 different usb cable, nothing.
Try on 2 other pc, nothing (no reaction of pc, no bells) only charging
Also, It do not connect anymore my car, (was functioning properly)
Redmi note 3 Kate
Android 6.0.1 mmb29m
security android 2018-07-01
MIUI Global 10.2.1.0 MHRMIXM
I have usb debugging on,
try install usb, nothing
usb config, charge only, mtp, ptp, nothing
I change the usb board in the redmi, no change, grrrrr
WTF
I has been several months I try to enable the usb data transfert without any result.
Suggestion? except to change the phone, I have no more ideas.
But everything else is working properly in the telephone.....
Regards
JF
Lachaine said:
Hi
I do not know what to do more.
Symptom: Connect usb cable to pc, no reaction of pc, only charging. Windows 10
Reinstall all the driver several time,
Try maybe 10 different usb cable, nothing.
Try on 2 other pc, nothing (no reaction of pc, no bells) only charging
Also, It do not connect anymore my car, (was functioning properly)
Redmi note 3 Kate
Android 6.0.1 mmb29m
security android 2018-07-01
MIUI Global 10.2.1.0 MHRMIXM
I have usb debugging on,
try install usb, nothing
usb config, charge only, mtp, ptp, nothing
I change the usb board in the redmi, no change, grrrrr
WTF
I has been several months I try to enable the usb data transfert without any result.
Suggestion? except to change the phone, I have no more ideas.
But everything else is working properly in the telephone.....
Regards
JF
Click to expand...
Click to collapse
Put phone in fastboot mode.
Download latest kate fastboot rom
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Extract the downloaded fastboot rom zip.
install and run miflash tool on win64 bit pc
Select "clean flash " option in miflash tool
Flash it
Like I said, I have no possibility to connect any pc. Need to work in the cell, only. I can transfert file via wi-fi only. Thanks
Lachaine said:
Like I said, I have no possibility to connect any pc. Need to work in the cell, only. I can transfert file via wi-fi only. Thanks
Click to expand...
Click to collapse
Try to find a replacement Charging Jack PCB and replace it, if it still doesn't work then there's something else causing problem with your device. Also have you tried a different PC?
Already replaced
I use my device daily and there is no such big issue but when i used to change the rom, my otg didn't respond when my device is booted and in the recovery section it shows perfectly.
And after connecting to computer it starts connecting and disconnecting.
When i used switch the usb cabel then it starts behave normally.
The same situation happens with my pd but it only shows in the recovery.
I think my otg output is not good?
If anyone facing the same issue please help me too if u having any solution.