Hi I recently dropped my T-Mobile HD2 in a puddle of water very briefly i took the cover off and battery right after it happened and wiped everything down. The phone worked flawlessly for about 6 hours then I finally got a black screen. The phone will turn on boot into android(2.3 NAND) and the touch screen works plus im able to recieve calls and messages BUT the only way to tell is to use a bright flashlight to see the screen as I have NO BACKLIGHT. Help me please?
You have probably dead light emission layer. By all means, LCD is to be replaced.
You shouldn't turn phone on immediately after accident. Removing battery immediately, complete disassemble of every possible piece and letting it rest for 2-3 days in warm dry place is a proper way to do this. Next time of course.
So just replace the LCD? Should I order a digitizer with it? Thanks in advance.
my zenfone 4 dropped and hit hardly by its edge....there's no crack on screen, the screen also still working...i think i can't boot the phone cuz its just showing black screen. Even while charging, nothing show up over the screen. Can I fix this by myself? or do I need to send it to the shop for repair?
Hello guys, some days ago, my Honor 7 dropped from like 30 cm, and touch screen stopped working, also screen BUT the phone is taking light from some where, I mean, screen light's up, but can't see antyhing. I don't think, its the screen problem cuz it doesn't even shatter, phone was in case.
sometimes the indisplay Fingerprint sensor stops working at all.
The display wont recognize any touch and stays black.
If i push the Power button it starts working again.
This happens sporadically, 1 -3x a day
Did anyone had the same Problem?
Any suggestions?
Thanks for reading....
No one?
kamueone said:
No one?
Click to expand...
Click to collapse
I haven't seen this problem. I use face unlock along with it and it usually recognizes my face before I can even scan it.
When the screen is black, you can put your finger on the display and some glowing circle Appears. This does not appear to me at all. The screen just stays Black.
Thx for the information.
kamueone said:
When the screen is black, you can put your finger on the display and some glowing circle Appears. This does not appear to me at all. The screen just stays Black.
Thx for the information.
Click to expand...
Click to collapse
Maybe your fingerprints got erased somehow? Does your phone display a fingerpring icon on the screen a second after you turn the screen off?
Sent from my LYA-L29 using XDA Labs
Yes the second I turn if off it shows a fingerprint sensor. Just after a while it won't toggle the sensor if I touch the display. It's like the fingerprint sensor is deactivated. The second I turn the display on manually it appears again.
Hello! I've got the p20 pro and now I'm testing mate 20 pro. Sometimes I'm not able to unlock the mate with my fingerprints at all. Same finger. The p20 works perfect, just touch and unlock. Mate sometimes I have to touch it 3-4 times before it unlocks , sometimes it doesn't unlock at all? Is that normal? The display was exchanged already because of this issue.
I believe you guys are not the only one. This on screen finger print is not reliable. I guess because they are new and will improve over time. Personally I just use face recognition than finger print. They are a lot more faster and accurate to unlock.
I know it's an old thread but it's happening to my M20Pro right now! It's awful! The screen is protected by a tempered glass made by Spigen (maybe this glass has issues?). I reconfigured the fingerprint and I touched almost 50 times until the phone captured the fingerprint! What's wrong with that sensor?!
I had problems with glass protector, if you can get plastic film it is fine, glass you will have problems....this was my finding
Possible brightness/proximity sensor issue
kamueone said:
sometimes the indisplay Fingerprint sensor stops working at all.
The display wont recognize any touch and stays black.
If i push the Power button it starts working again.
This happens sporadically, 1 -3x a day
Did anyone had the same Problem?
Any suggestions?
Thanks for reading....
Click to expand...
Click to collapse
If you still have this phone and problem: I have a P30 Pro, and/but the reason I write here is because our phones share the fingerprint technology, and I didn't find anyone mentioning this problem regarding P30 Pro. So:
I have the same problem - seemingly sporadically the fingerprint sensor (or screen) wont react until I press the power button. Then I noticed that when the brightness/proximity sensor (located near the top right on the P30 Pro, and next (right) to the upper speaker on Mate 20 Pro) was covered, the screen would get unresponsive. I guess this is by design, to not accidently let your phone come to life in your pocket. The problem was/is that the proximity (?) sensor is way too sensitive - any obstruction at about 2 cm (0.8") above the sensor(s) will trigger this behaviour. I also think it can be triggered under other circumstances; I had som weird fingerprint/screen behaviour in a store with a high and very dark ceiling, but I have to test this again, so don't take my word for it.
Anyway - if anyone is having sporadic problems - see if this could be a reason.
Edit: Well, sometimes my screen is just totally unresponsive even without sensors blocked, so ... I noticed it a couple of times after digging my phone out of my pocket, suggesting it could still have something to do with the sensors turning the screen (functions) off. I'll try to see if I can make it behave the same way in other scenarios.
I have also been experiencing similar problems on my mate 20 pro, But mine is more of an accuracy problem. sometimes its on point and registers instantly. and other times it just doesnt at all.
However i have noticed that in extremely bright weather i have more issues, fingerprint doesnt read at all, and face ID is also doesn't. My finger print issues have started only after EMUI 10.1, so i suspect that it could possibly be a software related issue
I accidentally threw my Swift X2 into the toilet last week. it was only partially submerged for a few seconds.
I switched it off, buried it in long grain rice and today - 5 days later attempted to switch it on. screen flickers, black stripe about 1cm wide on right of b+w boot screen then nothing.
should I just leave it for a few more weeks in the rice or is it doomed? a teardown guide would help to get the back off and improve airflow/drying. I've searched but couldn't find.
bought a cheap nexus 5x as backup but hoping my Swift will live again.
thanks for reading. any suggestions welcome.
Have you tried adding soy sauce?
Sent from my Huawei P Smart using XDA Labs
GREAT!
Help: Note 9 display blinks after being hit by rain
Hello Fellow note 9 users, Please any advice will be appreciated, i got drenched by rain and my note 9 display starts blinking and some parts of the screen wont even respond. I couldnt power it off because of the pin which can be entered due to...
forum.xda-developers.com