Related
So, I've been willing to Flash a Lollipop Rom on my phone to enjoy the trusted device functionality without the need of a third party app but I realised I had to reset my watch in order to re-pair it with my phone...is there any way around it ? I guess if I reset I'll have to download the OTA's update for the watch again ?
You can use Beelink.apk for resync without resetting the watch. Anyway the reset is over the latest firmware, so you dont have to download again the OTAS. I've not tried the resync, but I guess that you must install the same apps again, beelink app works great, but I don't know if it will work perfectly. I only can say that beelink unpair the watch for pairing with another device. Reply me if you want the beelink.apk, was deleted from playstore. You must install it on the watch throught ADB command line. I've tried unpair my phone for re-pair again with the same phone 5 minutes later, and it works.
prototovsky said:
You can use Beelink.apk for resync without resetting the watch. Anyway the reset is over the latest firmware, so you dont have to download again the OTAS. I've not tried the resync, but I guess that you must install the same apps again, beelink app works great, but I don't know if it will work perfectly. I only can say that beelink unpair the watch for pairing with another device. Reply me if you want the beelink.apk, was deleted from playstore. You must install it on the watch throught ADB command line. I've tried unpair my phone for re-pair again with the same phone 5 minutes later, and it works.
Click to expand...
Click to collapse
Thanks for your answer I'll try and find beelink but but a link would be greatly appreciated
nicolahaye said:
Thanks for your answer I'll try and find beelink but but a link would be greatly appreciated
Click to expand...
Click to collapse
Here´s the link
Tell us if this works please!, it may be helpful for others
Hi,
beelink don't have any interface and no effect after wipe my phone, can't connect to my watch without wipe.
edit: you must start beelink on the watch and send the pairing request from the watch
regards
starbase64
Yes, and it did not pair?
Works here, but send pair request via beelink from watch.
starbase64 said:
Works here, but send pair request via beelink from watch.
Click to expand...
Click to collapse
I know, this app only runs on watch, but does your phone pair with the watch vía beelink? It may be paired succesfully.
Try this: http://forum.xda-developers.com/and.../app-reset-wear-client-switch-phones-t3058962
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
7eregrine said:
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
Click to expand...
Click to collapse
No you can't just unpair from the watch and connect to a new rom or phone. You have to reset the watch. That's how it works unless you use Beelink or the new wear reset client.
I've tried using the app too, and it doesn't pair the 2nd phone.
7eregrine said:
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
Click to expand...
Click to collapse
Android Wear does not allow you to unpair the device from your main phone and does not allow you to pair it up with a new mobile device via the bluetooth settings menu. You must reset the device for it to go through OOTB again, during which the connected mobile is added to the Android Wear app's database/settings on the watch.
Use the Wear app.
stevemw said:
Use the Wear app.
Click to expand...
Click to collapse
The OP was asking if he could switch devices the watch was connected to after switching ROMs or Devices. The Android Wear app does not work for this purpose as it doesn't reset the connected device to accept a new connection, nor can it be used when there isn't a device paired with it. (Simply pairing through the Bluetooth settings menu does nothing).
ShadowEO said:
Android Wear does not allow you to unpair the device from your main phone and does not allow you to pair it up with a new mobile device via the bluetooth settings menu. You must reset the device for it to go through OOTB again, during which the connected mobile is added to the Android Wear app's database/settings on the watch.
Click to expand...
Click to collapse
Missed this reply. You absolutely can Un-pair, and Re-pair. You can Un-pair devices right from the watch itself. And if you can Un-pair from the Watch, what would possibly prevent you from pairing it to a new device?
//EDIT// OK maybe not. Just tried to Unpair from the Watch. Settings > Unpair > pretty much a blank screen. Nothing to do here. Why is this option here then??
That really wasn't the point I wanted to make, though.
Resetting the Watch is no big deal. Not like there is anything you need to backup. Reset, Re-pair, Resynch. Done.
---------- Post added at 04:49 PM ---------- Previous post was at 04:37 PM ----------
In the interest of putting my money where my mouth is, I just reset my Watch. Wanted to try something anyway, so why not.
Annnnd: it's been 5 minutes it has already synched more then half my apps. Should be done in 10. Other then having to reset up and apps I said to "Not Bother Me" what is the downside of resetting?
Facer was the only app to not Synch. Went into AW and Forced a resynch. Everything is there now. Time spent, about 12 minutes.
7eregrine said:
Missed this reply. You absolutely can Un-pair, and Re-pair. You can Un-pair devices right from the watch itself. And if you can Un-pair from the Watch, what would possibly prevent you from pairing it to a new device?
//EDIT// OK maybe not. Just tried to Unpair from the Watch. Settings > Unpair > pretty much a blank screen. Nothing to do here. Why is this option here then??
That really wasn't the point I wanted to make, though.
Resetting the Watch is no big deal. Not like there is anything you need to backup. Reset, Re-pair, Resynch. Done.
---------- Post added at 04:49 PM ---------- Previous post was at 04:37 PM ----------
In the interest of putting my money where my mouth is, I just reset my Watch. Wanted to try something anyway, so why not.
Annnnd: it's been 5 minutes it has already synched more then half my apps. Should be done in 10. Other then having to reset up and apps I said to "Not Bother Me" what is the downside of resetting?
Facer was the only app to not Synch. Went into AW and Forced a resynch. Everything is there now. Time spent, about 12 minutes.
Click to expand...
Click to collapse
There isn't really a downside to resetting honestly. Unless you use Google Play Music and have about 200+ songs synchronized, you should be good to go very shortly after that. I do agree that it is really no big deal resetting the device.
Indeed I tried beelink and i finally find it easier to reset every time I flash a new ROM no big deal since I don't sync songs
Guys, I have an amazfit verge and it has happened that under the skins of my watch and much of it does not appear. I download it for the way Internal Storage / WatchFace, what can it be, name it?
I already tried everything
rafaelbillion said:
Guys, I have an amazfit verge and it has happened that under the skins of my watch and much of it does not appear. I download it for the way Internal Storage / WatchFace, what can it be, name it?
I already tried everything
Click to expand...
Click to collapse
When i renamed some with WFZMaker app watch faces, watch did not detected it too, i don't know why it happen. So question did you modified it somehow like i did with some? I hope you know that downloaded 3rd parties watch faces must to be in watch face folder (when you connecting watch with PC)
xdauser2019 said:
When i renamed some with WFZMaker app watch faces, watch did not detected it too, i don't know why it happen. So question did you modified it somehow like i did with some? I hope you know that downloaded 3rd parties watch faces must to be in watch face folder (when you connecting watch with PC)
Click to expand...
Click to collapse
Do not rename, just copied right into the correct folder inside the clock memory as I always did with PACE, what can it be? There are some that I noticed that appears ONLY by the clock and not by the software (APP) of the cell phone, but does not show the skin nice when the clock is turned off and we would see to see the time.
rafaelbillion said:
Do not rename, just copied right into the correct folder inside the clock memory as I always did with PACE, what can it be? There are some that I noticed that appears ONLY by the clock and not by the software (APP) of the cell phone, but does not show the skin nice when the clock is turned off and we would see to see the time.
Click to expand...
Click to collapse
I can just give you advise to try reset factory settings of watch. I hope will help if no, sorry for me just not worked after rename wfz watch faces. By the way it happen with all watch faces or just one, specific? Maybe something wrong is with watch face, not yours watch
Hi there,
I don't seem to be able to use the phone function on my Verge. I have the latest software update but I didn't find any way of making the watch get notification from the calls coming into my S10E. is this a Samsung issue?
Thanks to anyone who will respond.
Dedalus73 said:
Hi there,
I don't seem to be able to use the phone function on my Verge. I have the latest software update but I didn't find any way of making the watch get notification from the calls coming into my S10E. is this a Samsung issue?
Thanks to anyone who will respond.
Click to expand...
Click to collapse
Be sure you have latest update of:
Watch app (3.2.0-Play) - https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager&hl=en
Watch Verge (ROM) (3.2.5.0)
Then go to Amazfit watch app:
1. Open app
2. Profile
3. Amazfit Verge
4. Scroll to down
5. Notifications settings
6. Must be market/checked these: a) Push notification (must be red dot) b) in Push notifications must be added app which in yours phone is responsible of incoming calls. Also keep in my must be all permissions enabled, after update sometime need to enable it again. If still will not helps, do factory reset of watch Verge, with re-install app Amazfit in yours phones (I doing like this often, helping me), but without restore of data in Amazfit app. It's important !!!
IMPORTANT: After factory reset in watch you will lose that day activities information. But don't worry it must be show in Amazfit watch app anyway, you just couldn't to see it in that day when you will do factory reset in watch, past days must be showed. For me working everything like this
Thanks for the reply but it doesn't work
Dedalus73 said:
Thanks for the reply but it doesn't work
Click to expand...
Click to collapse
Sad Did you tried to connect/pair with other smartphone? Factory reset of watch Verge for me most time working, re-install of Amazfit watch app asking all the time to give permissions from new, so you ca be sure that you will gives it 100% right, but if you after all these steps still have this problem, you just can try to connect/pair with others smartphone, even with the same account, if working on others smartphone, that's mean with your S10 something wrong, if no and problem persist maybe you using AmazMode app or something like this? Then developers will help you better
My smartphone is not rooted, in watch is official ROM and I using it without any 3rd parties apps software and ect.
yes, with Pocophone it works very well. THe issue with Samsung is double sim. If I turn off one of the two sims the calls arrive to the Verge about once in every 10 tries. The other 9 the Verge vibrates a bit then stops and the call is not shown. I only get the notification of missed call. If I turn on both sim cards the Verge doesn't receive the call. Is there a way to inform AMAZFIT developers of this?
Are you using the stock Samsung ROM? Did you try installing a third party app for calls, like Contacts+?
You can send feedback from the app's help section (probably it will arrive in the Chinese support) or use this link if you have an International model:
https://support.amazfit.com/hc/en-us/requests/new
lfom said:
Are you using the stock Samsung ROM? Did you try installing a third party app for calls, like Contacts+?
You can send feedback from the app's help section (probably it will arrive in the Chinese support) or use this link if you have an International model:
https://support.amazfit.com/hc/en-us/requests/new
Click to expand...
Click to collapse
Yes I'm using stock S10E rom. Third party app for calls on the phone you mean? No, I haven't tried.
Thanks for the link!
Dedalus73 said:
Yes I'm using stock S10E rom. Third party app for calls on the phone you mean? No, I haven't tried.
Thanks for the link!
Click to expand...
Click to collapse
I mean this app https://play.google.com/store/apps/details?id=com.edotassi.amazmod&hl=en_US. I think it not just for call If you using everything stock then strange and I advise you to talk with Amazfit Support in https://en.amazfit.com/support.html (Global, via mail) or https://support.amazfit.com/hc/en-us/categories/360001563933-Verge-Smartwatch. But I don't know why, but I have feelings that you doing something wrong, it can be that you did not gave permission for call notifications. As I mentioned try to factory reset (sometime it helping after several times), app to delete and re-install after reboot of smartphone, I don't have smartphone with PIE, but in these steps I don't think is something big differences as is in Marshmallow Good luck :highfive:
Hi guys,
Two days ago my GTR 47 upgraded the firmware, by itself, to version 1.3.4.19. At first I didn't notice any change and continued with my life because my first watchface seems OK.
But then I swapped to my second watchface that's distorted.
On top of this, the numbers aren't showing in some menus like: weather, alarm, status, heart rate...
I already tried to reset and shut down the watch and even a factory reset with no luck, so... don't know what to do next. Any Help?
AlexandreOliveira said:
Hi guys,
Two days ago my GTR 47 upgraded the firmware, by itself, to version 1.3.4.19. At first I didn't notice any change and continued with my life because my first watchface seems OK.
But then I swapped to my second watchface that's distorted.
On top of this, the numbers aren't showing in some menus like: weather, alarm, status, heart rate...
I already tried to reset and shut down the watch and even a factory reset with no luck, so... don't know what to do next. Any Help?
Click to expand...
Click to collapse
I had the same problem. I contacted with customer support. They said it cannot be repaired, offered a 37 $ refund.. which I did not accept. Now I am waiting for their answer.
kt0516 said:
I had the same problem. I contacted with customer support. They said it cannot be repaired, offered a 37 $ refund.. which I did not accept. Now I am waiting for their answer.
Click to expand...
Click to collapse
So, yesterday the watch got upgraded to version 1.3.5.08, by itself, through the Amazfit app and now is working normally again. You can also use the "Notify & Fitness for Amazfit" app to install some version of the firmware, this should solve your problem too, just remember to do that in this order (Firmware -> Resource -> Fonts) but if you don't want to risk it, just wait for the upgrade.
AlexandreOliveira said:
So, yesterday the watch got upgraded to version 1.3.5.08, by itself, through the Amazfit app and now is working normally again. You can also use the "Notify & Fitness for Amazfit" app to install some version of the firmware, this should solve your problem too, just remember to do that in this order (Firmware -> Resource -> Fonts) but if you don't want to risk it, just wait for the upgrade.
Click to expand...
Click to collapse
Thanks I updated and it's ok again.
Hello guys,
I just bought a new Amazfit Bip U, but after 2 days, i installed Notify for Amazfit app, and here you can install custom firmware. I saw something to see all emoticons, a font. But after update, my band shows "update failed". One of the worst solutions is to wait for a new official update... Do you know another solutions?
This is on my watch screen
Bibuta1 said:
Hello guys,
I just bought a new Amazfit Bip U, but after 2 days, i installed Notify for Amazfit app, and here you can install custom firmware. I saw something to see all emoticons, a font. But after update, my band shows "update failed". One of the worst solutions is to wait for a new official update... Do you know another solutions?
Click to expand...
Click to collapse
It also happen to me. I connect the watch with phone and change the font from watch setting. And i got it back.
Htet Aung Hlaing said:
It also happen to me. I connect the watch with phone and change the font from watch setting. And i got it back.
Click to expand...
Click to collapse
Can you tell us how you do it? I mean how you connect the watch with phone and change the font from watch setting. It may help other users too. Thanks!
i.muzzafar said:
Can you tell us how you do it? I mean how you connect the watch with phone and change the font from watch setting. It may help other users too. Thanks!
Click to expand...
Click to collapse
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Htet Aung Hlaing said:
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Click to expand...
Click to collapse
Thank you so much for the explanation! I will try to follow your method and I hope it will work on my device since Im facing the same problem too.
This method is working. I used it to repair my watch.
Htet Aung Hlaing said:
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Click to expand...
Click to collapse
Thank you! I almost considered about just buying a new watch from Amazon.